REPAIR/MAINT OF JOINERIES, PLASTERING, FLOORING, PLUMBING, ETC AT ZONE-II AT BASISTHA UNDER GE GUWAHATI

Amount

Taking down chowkats or frames (without taking off shutter from the frame) not exceeding 1.5 sqm each complete all as specified & as directed.

Taking down chowkats or frames (without taking off shutter from the frame) exceeding 1.5 sqm but not exceeding 4 sqm each complete all as specified & as directed.

Taking down shutters of any description not exceeding 1 sqm each complete all as specified & as directed.

Taking down shutters of any description exceeding 1 sqm but not exceeding 2 sqm each complete all as specified & as directed

S&F, second class hard wood, plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S&F, 35mm thick, second class hard wood, plain, framed, panlled shutters (any numbers of panels), with panels of timber flat on both sides, or of veneered particle board medium density, wood particle board with commercial face veereers, fitted to chowkat complete all as specified and directed.

S&F, 30mm thick, flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides complete all as specified & as directed.

S&F, 35mm thick, 2nd class hard wood, Glazed & Skeleton shutters, open rebated & prepared to receive glass, gauze, etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc sizes of member of shutter as specified in SSR Part I, section 8, clause 8.24(a), fitted to chowkats complete all as specified and directed.

S&F, 30mm thick, 2nd class hard wood, Glazed & Skeleton shutters, open rebated & prepared to receive glass, gauze, etc (with sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc sizes of member of shutter as specified in SSR Part I, section 8, clause 8.24(b), fitted to chowkats complete all as specified and directed.

S&F, Factory made solid panel PVC door shutter, 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as specified and as directed.

S&F, Solid PVC frame of size 50mmx47mm made out of 5mm plain colour PVC sheet re-enforced with MS square tube complete all as specified and directed

Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed.

S&F, in repair, 20mm thick, second class hard wood, boarding, planed both sides with butt joints fixed with nails in any situations (except flooring & skirting) complete all as specified and directed.

S&F, Colour coated Aluminium anodised doors/windows/ ventilators/partitions etc with one or more rebates including joining cleat for fixing etc complete with frames, shutters and grills, etc. The design/pattern/profile size and other dimensions shall be all as directed by Engineer-in-charge as per site requirement, including aluminium handles, tower bolts, grills, etc complete all as specified and directed. Note:- Floor door spring, sheet glass, wire cloth, lock shall be measured and paid seperately.

S&F, 4mm thick, tinted glass panes, not exceeding 0.5 sqm, fixed to aluminium doors/windows/vents with necessary rubber gaskets complete all as specified and directed.

S&F, 5.5mm thick, tinted glass panes fixed, exceeding 0.5 sqm, to aluminium doors/windows/vents with necessary rubber gaskets complete all as specified and directed.

M&L, 12mm thick, Prelaminated particle board, exterior grade, prelaminated both side with decorative choice lamination fixed to timber frame work complete all as specified and directed.

S&F, Stainless Steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

M&L, Preparation of new wood and wood based surfaces of any description, over 10 cm in width or girth and applying two coats of synthetic enamel paint over and including a coat of pink primer complete all as specified and directed.

M&L, treating backs of chowkats etc using coal tar black paint incl preparation of surfaces of area exceeding 0.10 Sqm but not exceeding 0.50 Sqm each complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames, glazed with putty or fixed with beads complete, all as specified and as directed.

M&L, 3mm thick sheet glass, ordinary quality and glazing with oil putty in square not exc. 0.5sq.m in each pane complete all as specified and directed.

S&F, aluminum anodised, barrel tower bolt of extruded section, length of bolt 200mm complete all as specified & as directed.

S&F, aluminum anodised, barrel tower bolt of extruded section, length of bolt 125mm complete all as specified & as directed.

S&F, Aluminium alloy,anodised, sliding door bolt, length of bolt 300mm, with hasp, staple (bolt type), and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.

S&F, Aluminium handles, 150mm size, cast type, anodised, complete all as specified and directed.

S&F, Aluminium handles, 100mm size, cast type, anodised, complete all as specified and directed.

S&F, Butt hinges, size of hinges 100mm, medium weight, cold rolled mild steel complete all as specified and directed.

Supply only Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, typeB-11 of size 100 mm complete, all as specified and as directed.

S&F, Butt hinges, size of hinges 75mm, medium weight, cold rolled mild steel complete all as specified and directed.

S&F, in repair, mild steel, 300mm, ordinary rat tail rod patern springs including rollers and roller plate complete all as specified and directed.

S&F, in repar, Floor door stopper of aluminium body and tongue, anodised, with hard drawn steel spring, 140 mm long overall length of cover plate complete all as specified and directed.

S&F, Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

S&F, in repair, Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed.

Dismantling of wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets and scantaling.

S&F in repair non asbestos fibre cement building boards 4mm thick fixed with anodised aluminium snap grid frame work for false ceiling with Hangers 6mm dia GI upto 1200mm length adjusting level fixed to roof slabs/roof frame work etc by means of ceiling cleats made out of GI flat 40x3 mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long including application of two coats of distempering over a coat of primer complete all as specified

Dismantling asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings including ridge or similar pattern roof coverings complete all as directed.

"S&F asbestos cement corrugated or semi corrugated sheet 6mm thick in roofs etc fixed with “L” or ‘J” type or cranked hook bolts complete all as specified and as directed

Dismantling MS work of any description complete all as specified and as directed

S&F, in repair, Mild steel works as in grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, and similar works conforming Fe-290 Gde E-165 complete all as specified and as directed.

S&F, in repair, structural steel work in tubular trusses/purlings/ rafter/post etc including special shaped washer, etc complete using ERW or induction butt welded tubes conforming to IS-1161 grade St.-240 complete all as specified and directed.

Dismantling Corrugated steel Sheets any gauge, thickness, Nainital or Similar Pattern Roof Coverings , complete all as directed.

S&F, in repair, Pre-painted galvalume aluminium zinc coating GI based corrugated/semi corrugated steel sheet 0.50mm thick of approved colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F, in repair, Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of approved colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Demolition of brick work built in cement mortar complete all as specified and directed.

M&L for brick work with sub class 'B' bricks, old size bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar (1:6) complete all as specified and directed.

M&L for brick work with sub class 'B' bricks, old size bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4) complete all as specified and directed.

Taking down cement plaster from brick or stone walls, etc including raking out joints, haking for key, scrubbing down with water, etc. complete all as specified and directed.

M&L, rendering cement plaster 15mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L, rendering cement plaster 15mm thick in cement mortar (1:6) on stone masonry or other than fair faces of brick work or concrete surfaces, finished even and fair complete all as specified and directed.

M&L for preparing of new plastered or un-plastered wall surfaces and applying two coats of oil bound distemper over and including two coats of wall care white cement putty complete all as specified and directed.

M&L for applying two coat of cement base paint after preparation of newly plastered wall surfaces complete all as specified and directed.

Preparation of old decorated plastered/unplastered surfaces of walls by using electric sander machine or steel wire brushing, scraping down smoke soot,moulds, moss & efflorescent salts, trading oil or greasy spots and applying one coat of cement base paint complete all as specified and directed.

Preparation of ceiling surfaces by using electric sander machine or steel wire brushing, scraping down smoke soot,moulds, moss & efflorescent salts, trading oil or greasy spots and applying one coat of cement base paint complete all as specified and directed.

Preparation of old surfaces of walls by using electric sander machine or steel wire brushing, scraping down smoke soot,moulds, moss & efflorescent salts, trading oil or greasy spots and applying one coat of oil bound distemper complete all as specified and directed.

Preparation of ceiling surfaces by using electric sander machine or steel wire brushing, scraping down smoke soot,moulds, moss & efflorescent salts, trading oil or greasy spots and applying one coat of oil bound distemper complete all as specified and directed.

Demolition of concrete in ground floors & paving not exc 15cm thickness (below or above ground level) complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in plinth protection/paving including making joint at every 3 mtr interval and at corner and filled with mixture of bitumen and sand and finished even and fair and laid in alternate bays complete all as specified and directed.

Dismantling floor hearth wall tiling including cement mortar bedding (but not backing removing serviceable tiles to store and rubbish at the premises

M&L for coloured non skid ceramic tiles, 7 to 8 mm thick, (square/rectangular), area of each tile exceeding 0.11 sq.m but not exceeding 0.18 sq.m in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed or bedding layer of 15 mm thick cement mortar (1:6) complete all as specified and directed.complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 450mm x 350mm x 7mm on vertical surface such as skirting, dados, risers to steps etc, set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, over and including rendering 10mm thick in cement mortar (1:4) complete all as specified and directed.

M & L Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, light shade, area of each tiles n. exc. 0.36 sqm but in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed or bedding layer in CM 1:6 over 25 mm thick PCC B-0, 1:2:4 (12.5 mm graded aggregate) complete all as specified and directed.

S&F, in repair, Grating doom, 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 for concealed water tubing or concealed conduit wiring, etc. and making good, cutting not exceeding 10 cm girth in brick walls complete all as specified and directed.

S&F, in repair, 15mm bore, steel water tubes, medium grade, galvanized, with all fittings and fixed to walls and ceilings or laid in floors, including taking up/down of old tube complete all as specified and directed.

S&F, in repair, 20mm bore, steel water tubes, medium grade, galvanized, with all fittings and fixed to walls and ceilings or laid in floors, including taking up/down of old tube complete all as specified and directed.

S&F, in repair, 25mm bore, steel water tubes, medium grade, galvanized, with all fittings and fixed to walls and ceilings or laid in floors, including taking up/down of old tube complete all as specified and directed.

S&F, in repair, 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls including stack clamp complete all as specified and directed.

Supplying, hoisting, fixing in position and connecting, in repair, 500 litres capacity rotational moulded polyethylene water storage tank (cylindrical, vertical with closed top) including dismantling, removal from site and fixing arrangement for inlet/outlet/over flow and vent pipe of standard sizes all as specified in SSR Part-I complete all as specified and directed.

Supplying, hoisting, fixing in position and connecting, in repair, 1000 litres capacity rotational moulded polyethylene water storage tank (cylindrical, vertical with closed top) including dismantling, removal from site and fixing arrangement for inlet/outlet/over flow and vent pipe of standard sizes all as specified in SSR Part-I complete all as specified and directed.

S&F, in repairs, vitreous china squatting pan, 'Orissa’ pattern, white of size 580mm x 440mm with integral foot rest, P or S trap (excluding flushing cistern and flush pipe) including plain cement concrete (1:5:10) type D-2 using 40 mm graded stone aggregate as in filling in sunken portion etc. complete all as specified and directed.

S&F, in repair, vitreous china wash down water closet pan (Pedestal pattern), white with 'p' or 's' trap with fixing bolts (excluding flushing cistern and flush pipe), including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe etc. complete all as specified and directed.

S&F, in repair, Vitreous china wash basin, white, flat back of size 550mm x 400mm excluding chain & plug, taps, waste pipe and porcelain stopper but including brackets grouted in cement mortar 1:2 in wall complete all as specified and directed.

S&F, in repair, plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed.

S&F, in repairs, 10 litres capacity, PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet ball valve, float and handle including brackets and connection to pipe or lever etc with PVC connection 15 mm size with PTMT nuts of length 450 mm and also including 32mm bore flush pipe of high density for low level cistern complete all as specified and directed.

S&F, in repair, 20mm bore, ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed complete all as specified and directed.(Minimum weight -210 Gms)

S&F, in repair, Brass chromium plated, tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

S&F, in repair, 20mm bore, Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F, in repair, 15mm bore, bib taps, cast copper alloy, chromium plated, screwed down, screwed for iron pipe or brass ferrule complete all as specified and directed.

S&F, in repair, 15mm bore, stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipes or for unions complete all as specified and directed.

S&F, in repair, 15mm bore, Bib tap, standard of PTMT, any colour, high pressure, screwed for iron pipe and fixed complete all as specified and directed.(Minimum weight - 90 Gms)

S&F, in repair, 15mm bore, Pillar tap, cast copper alloy, with capstan head, chromium plated, screwed down, high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F, in repair, PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F, Mild steel works as in bands, straps, supports or stays for rainwater pipes, includings bolts, if required hooks (stays), heavy, for large gates, hook & pintle hinges, large hasps & staples, clamps & hold fasts, wall ties, hooks for hanging ceiling fans and similar small articles conforming Fe-410-O or Fe-310-O complete all as specified and as directed.

Supplied and fixed in repairs sinks made of stainless steel 1 mm thick with drainage board for kitchen or laboratory with plugs , washers, waste pipe and coupling including bedding in cement mortar on to dwart wall or including fixing cantilever , brackets and connecting union to pipe . Overall size 915x460mm bowl size 410mm x 330 mm x 160 mm complete all as specified and directed.

M&L, Preparation of new steel and iron surfaces of any description, over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for, complete all as directed by the Engineer-in-Charge.

M&L for 40mm thick, cement concrete type B-0 (1:2:4) using 12.5mm graded stone aggregate as in padding/slope correction layer including finishing the top surface even and fair laid after roughning and cleaning existing concrete surfaces and brushing neat cement slurry @ 3 kg/sqm after removal of existng layer of PCC complete all as specified and directed.

M&L, Cutting out cracks to V-section in existing roofs or terracing, cleaningout, wetting, grouting with cement and sand slurry 1:3 complete all as specified and directed.

S&F, in repair, 18/19mm thick, Block boards, grade 2 quality, interior grade decorative type with decorative face veneer on one face fixed with screws to timber frame work complete all as specified and directed.

S&F, in repair, Health Faucet with 1 Mtr Tube all as specified and as directed. (Make-Prayag Cat No-BEA-40S or equivalent as approved by GE from list of approved makes)

S&F in repair Wall Mixer 3-in-1 system with provision for both Hand Shower and Overhead Shower Complete with 115 mm long Bent Pipe, Connecting Legs & wall flange (without Hanh & overhead Shower) all as specified and as directed Make-JAQUAR CAT No-SOL 6281 or equivalent as approved by GE from list of approved makes.

S&F in repair 15 mm Angle cock with wall flange all as specified and as directed Make-Prayag CAT No-MARCUS-6810 or equivalent as approved by GE from list of approved makes.

S&F in repair flush cistern 10Ltr capacity all as specified and as directed Make-Prayag CAT No-MACASA-703 or equivalent as approved by GE from list of approved makes.

S&F in repair 125 mm waste coupling for kitchen stainless steel sink, outer plastic coated & inner stainless steel stain Make JAINKO CAT No-WFC-5 or equivalent as approved by GE from list of approved makes.

S&F in repair Bathroom mirror cabinet(330x430)mm Make Prayag CAT No-551 or equivalent as approved by GE from list of approved makes.

S&F in repair harrison rails, mild steel, chromium plated with fixing brackets, stop rollers etc and fixed in position complete all as specified and directed.

M/S SR BUILDERS

DEEP CONSTRUCTION

M/S K Nath and co