Construction of Boundary Wall at Upper Primary School and Toilet Block at Vill. Aeri Rampura, Block-Dakor (Distt.Jalaun)

Amount

Main Buliding & Toilet Block

Site clearing cutting jungle uprooting roots grass vegetation etc.

Boring with hydraulic piling rigs with power unit ,providing and ininstalling cast in situ single under reamed piles of specified diameter and length below pile cap in M-25 cement concrete ,to carry of safe working load not less than specified .excluding the cost of steel reinforcement bul including the cost of boring with bentonite solution and the length of the pile to be embedded in pile cap etc. all complete (length of pile for payment shall be measured upto to the bottom of pile cap)

Extra over single under ream for providing additional bulbs in under reamed piles, under specified (only the Nos. of extra bulbs are to be paid)

Excavation in foundation in Black Cotton soil (loam clay,or sand )including lift upto 1.5 meter (5 fts )and lead upto 30m (100 fts ) & including filing,watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the engineer

Cement concrete in 1:4:8 cement sand 22.40-53 mm granite stone ballast crasher broken) in foundation includingsupply of all materials, labours and T&Petc. required for proper completion of the work

R.C.C work in 1:1½:3 cement approved coarse sand and 20 mm gauge granite stone gritt for Pile Cap excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc. also including supply of all materials,labour and T&P etc. required for proper completion of the work .Binding wire cost being included in the item.

R.C.C work in 1:1½:3 cement approved coarse sand and 20 mm gauge granite stone gritt for Plinth Beam excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc. also including supply of all materials,labour and T&P etc. required for proper completion of the work .Binding wire cost being included in the item.

R.C.C work in 1:1½:3 cement approved coarse sand and 20 mm gauge granite stone gritt for Column excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc. also including supply of all materials,labour and T&P etc. required for proper completion of the work .Binding wire cost being included in the item.

M 150 brick work in 1:6 cement and Coarse sand mortor in foundation and plinth i/c all complete as chapter 6 as

Providing and laying damp proof course 2.5 cm thick with cement concrete 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 10 mm ) and curing complete

M 150 brick work in 1:6 cement and C/sand of mortor in s/s in one brick thick wall including supply of all materials , labours and T&P etc. required for proper completion of the work.

R.C.C work in 1:1½:3 cement approved coarse sand and 20 mm gauge granite stone gritt for Lintel Bend excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc. also including supply of all materials,labour and T&P etc. required for proper completion of the work .Binding wire cost being included in the item.

R.C.C work in 1:1½:3 cement approved coarse sand and 20 mm gauge granite stone gritt for Sunshade excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc. also including supply of all materials,labour and T&P etc. required for proper completion of the work .Binding wire cost being included in the item.M-20

R.C.C work in 1:1½:3 cement approved coarse sand and 20 mm gauge granite stone gritt for Slab Beam excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc. also including supply of all materials,labour and T&P etc. required for proper completion of the work .Binding wire cost being included in the item.M-20

R.C.C work in 1:1½:3 cement approved coarse sand and 20 mm gauge granite stone gritt for Slab excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc. also including supply of all materials,labour and T&P etc. required for proper completion of the work .Binding wire cost being included in the item.M-20

R.C.C work in 1:1½:3 cement approved coarse sand and 20 mm gauge granite stone gritt for Plateform slab excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc. also including supply of all materials,labour and T&P etc. required for proper completion of the work .Binding wire cost being included in the item.M-20

Mild steel or iron in plain work such as reinforced concrete wrought to required same as necessary including bending for proper completion of the work.

Supply of M.S. angle iron door,ventilator Frame made of approved M.S. Iron including drilling holes welding and hinges of required size, nut & bolt etc. as per drawing for proper completion of work at site.

C.P th Teak decorative type (one side only ) and commercial lipping approved ply wood flush shutters 4 cm (1 1/2") thick ,As in item 470 but of C.P decorative type.

Approximate cost of Fittings with these rates are provided in the schedule screws for door and window etc. rates for estimating purposes. Fittings are to be supplied departmentaily.

Supply of Approved M.S. Z-Section Windows and Vantilatoers excluding cost of Glass Panes but including supply of all material its Fabrication nuts and bolt,hole fast for proper completion of work as per direction of engineer-in-charge and also including cost of handle stays rod etc. and one coat of red oxide paint complete in the respect site of work.

Supply of M.S. Supply Grill of a approved quality and drawing made of flat iron not bigger then 20x4 mm size including supply of materials ,fabrication, labour, T&P and also one coat of red oxide paint complete in all respect as per dirction of engineer -in-charge for proper completion of work at site.

Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x19 mm for styles and 15x15 mm for top & bottom rails.(30 mm thick pre laminated PVC door Shutters)

Providing and fixing glass panes/M.S. Sheet with putty and glazing clips in steel doors,windows,clerestory windowes all complete with

Providing & fixing in postion collapsible steel shutters with vertical channels 20x10x2 mm (3/4"x3/8"x1/12") & braced with flat iron diagonals 20x5 mm (3/4"x3/16") size withtop and bottom rails of T iron 40x40x6 mm (1 1/2"x1 1/2"x1/4") with 38 mm. dia steel Pulleys with bolts,nuts locking arrangements,stoppers handles ,complete including applying a priming coat of Approved red lead paint.

Providing and fixing 1mm thik M.S sheet sliding shutters with frame and diagonal braces of 40x40x6 mm. (1 1/2' x1 1/2'x1/4') angle iron , 3.15 mm.(1/8')gusset plates at the junctions & corners ,hooks at top ,25 mm.(1'), dia. Pulleys at bottom ,40x40x6 mm.(1 1/2' x1 1/2'x1/4') angles & T iron guides at top & bottom respectively including locking arrangement with handles,etc. complete and applying one priming coat of approved lead point.

15mm thick plaster in 1:6 cement mortar over brick work minimum thickness not to be less than 3/6”(12mm) thick including supply of all materials labour and T&P etc. required for proper completion of the work for proper completion of the work but with cement and approved coarse sand in 1:6 cement & fine sand of 1.25 F.M. mortar.in perapet wall. Inside

12mm thick plaster in 1:6 c:c/s mortar over brick work minimum thickness not to be less than 3/8”(10mm) thick including supply of all materials labour and T&P etc. required for proper completion of the work for proper completion of the work but with cement and approved coarse sand in cement & fine sand of 1.25F.M. mortar. in outside

6-10 mm ceiling plaster in 1:3 cement:sand mortar inluding all material labour T&P and safloding omplete

20mm Bearing plaster in 1:3 cement:sand mortar with neat finish

Providing and applying white cement based putty of average thickness1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.Rate( 115.15/112*100)

Two coat oil bound distemper Distempering with dry distemper of approved brand and manufacture (two or more coats) of required shade on new work, over and including water thinnable priming coat to give an even shade.Two Coat Oil bound distempar inside

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade New work Two or more coats applied on walls @ 1.25 ltr/10 sqmover and including one coat of Special primer applied @0.75 ltr /10 sqm Two coat weather coat Apex/ultima 142.20/112*100

Two coats of enamel paint over one coat of primer to give an even shade Door Painting two coat enemal paint

Providing & Laying "Brick Bat Coba" 100 mm thick laid with M-150 class brick 7.50 cm thick gap of 15 mm to each other ,over 20 mm thick base of cement mortar 1:4 cement and coarse sand mixed with water proofing compound spreading cement slurry mixed with aerelic cement concrete water Proofing compound filled gaps of coba & top of coba mortar mixed with water Proofing compound in 1:4 cement and coarse sand mortar finished smooth & Top mashed false square 30 cm x 30 cm and side wall Parapet shall be monotythic Plaster wall upto 30 cm higher and junction and corner shall be rounded by brick ballast cement and coarse sand masonary coba with top finishing plaster mixing with acetic water Proofing compound @ 2% by weight & including supply of all Material labour T&P etc. required for Proper completion of works.

Earth filling in plinth including ramming dressing and extra cortage from 2 km leaddistance complete work at site.

Local Sand filling in plinth including ramming dressing and extra cortage from 2 km leaddistance complete work at site.

Cement concrete in 1:4:8 cement sand 22.40-53 mm granite stone ballast crasher broken) in foundation includingsupply of all materials, labours and T&Petc. required for proper completion of the work

Cement concrete flooring 1:2:4 (1cement :2coarse sand:4 graded stone aggregate of size 20 mm nominal size) laid in one layer finished with floating cost of neat cement.

Providing and fixing glass stirrups in flooring 35x5mm size

Providing & laying of 8 to 10mm thick ivory or light shade Vitrified tiles of 600mmX600 mm size in flooring or skirting laid with 1:3 ( 1cement : 3 Coarse sand) finishing with cement slurry & with pigment grouting & polishing complete i/c supply of all materials, labour T&P required for proper completion of work. in Skiting

Providing & laying of 8 to 10mm thick ivory or light shade Vitrified tiles of 600mmX600 mm size in flooring or skirting laid with 1:3 ( 1cement : 3 Coarse sand) finishing with cement slurry & with pigment grouting & polishing complete i/c supply of all materials, labour T&P required for proper completion of work. in Skiting

Providing and fixing Granite stone in Entrance lobby Flooring Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with whitecement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge

Chequerred precast cement concrete tiles 22 mm thick in Ramp &

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Matt finish Rectified flooring in toilet floor

Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.dado/skirting in toilet

Providing and fixing stainless steel (Grade 304) railing made of hollow tubes ,channels, plates etc. including welding , grinding , buffing,polishing and making curvature (Wherever Required ) and fitting the same with necessary stainless steel nuts and bolts complete i/c fixing the railing with necessary accessories and stainless steel dash fastners, stainless steel bolt etc of requried size, on the top of the floor of the side of waste slab with suitable arrangement as per approval of engineer-in-charge

Providing & Fixing Green Board

20mm plasterin 1:3 c:sand mortar with neat finish over sunshade

Providing and fixing U. p.v.c rain water pipe 110mm dia with shoe,door bend etc.

M 150 brick work in 1:6 cement and Fine sand of mortor in s/s in one brick thick wall including supply of all materials , labours and T&P etc. required for proper completion of the work.(303+309+310)

12mm thick plaster in 1:6 c:c/s mortar over brick work minimum thickness not to be less than 3/8”(10mm) thick including supply of all materials labour and T&P etc. required for proper completion of the work for proper completion of the work but with cement and approved coarse sand in cement & fine sand of 1.25F.M. mortar. in outside (Parapet)

Appron Work

Supply and filling of Moorum soil in plinth protection /appron

Brick work in 1:6 cement:sand moratr in Appron

Lean concrete in 1:4;8 in appron

25 mm p.c.c.flooring in 1:2;4

Providing & fixing Glass sttirups in flooring

providing and injecting anti termite treatment pre and post

Soil Testing

Centering and Shuttering including strutting ,propping etc.and removal of form for Small lintels not exceeding 1.5 m clear span moulding as in cornices ,window sills ,string coures, bands,copings,bed plates anchor blocks and the like

Centering and Shuttering including strutting ,propping etc.and removal of form for Colums ,pillars,piers,Abutments,posts and struts

Centering and Shuttering including strutting ,propping etc.and removal of form for Suspended floor ,roof, landings ,balconies and access plateform

Main hole Chamber 60x45x50 cm

Boundary Wall

Clearing of Jungle uprooting of roots veg., grass etc including all Labour T&P etc.

Boring with hydraulic piling rigs with power unit ,providing and ininstalling cast in situ single under reamed piles of specified diameter and length below pile cap in M-25 cement concrete ,to carry of safe working load not less than specified .excluding the cost of steel reinforcement bul including the cost of boring with bentonite solution and the length of the pile to be embedded in pile cap etc. all complete (length of pile for payment shall be measured upto to the bottom of pile cap)

Extra over single under ream for providing additional bulbs in under reamed piles, under specified (only the Nos. of extra bulbs are to be paid)

RCC in 1:1.5:3 cement ,c/ sand. 20 mm nominal size s/grit including necessary shuttering it cantering with all material labour t & P etc complete

Brick work in super structure in1:6 cement c/sand mortar 230 mm thicluding all labour T&P and including necessary scaffolding with its arrangement fixing and removing

RCC in 1:1.5:3 cement ,c/ sand. 20 mm nominal size s/grit including necessary shuttering it cantering with all material labour t & P etc complete

15 mm thick wall plaster in 1:6 cement c/sand mortar with n.c.f.including all material labour t&p and scaffolding

Mild Steel of iron in plain work such as reinforced concrete of reinforced brick work (when not included in as over all rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of all steel and wastage ans over lapping and hooks

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade New work Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm Two coat weather coat Apex/ultima 142.20/112*100

Making Grove Line in Plaster i/c all material Labour T&P etc. complete

Main Gate

Providing and Fixing of M.S. Gate (size 4.20x1.80 mtr.)

Sanitaory & Water Supply Work Toilet Block

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white

Providing and fixing wash basin with C.I. brackets, 15 mm PTMT pillar cock, 32 mm PTMT waste coupling of standard

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white

Providing and fixing white vitreous china flat back or wall corner type

Providing and fixing of p.v.c.water storage tank

Providing and fixing PTMT bib cock of approved quality and colour. 15 mm nominal bore, 165 mm long, weighing not less

Providing and fixing PTMT stop cock of approved quality and colour. 15 mm nominal bore, 86 mm long, weighing not less

Providing and fixing PTMT grating of approved quality and colour. 125 mm nominal dia with 25 mm waste hole

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all 15 mm nominal outer dia Pipes metre 246.20

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all 20 mm nominal outer dia Pipes

making base of o.h.t.tank of brick masonery in 1:4

20mm plaster in 1:3 cement,sand mortar over base of tank

providing and fixing of float valve 15 mm

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube

Providing and fixing of m.s. bat holder clamp 100 mm

Providing and fixing PTMT 15 mm Urinal spreader size 95x69x100

providing and fixing of /pvc nahani trap 110x90 75 mm

providing and fixing of pvc.horn bend 100x 75 mm

providing and fixing of Pvc.plane bend 100 mm

providing and fixing of /pvc door bend 75 m

providing and fixing of pvc.coller 75 m

providing and fixing of pvc.coller 100 mm

providing and fixing of P.v.c pipe 110 mm

providing and fixing of p.v.c.pipe 90 mm

providing and fixing of c.I.cowel guard 50mm

making conection of water supply line from main

Sanitaory & Water Supply Work Main Buliding

Providing and fixing white vitreous china pedestal type water closet

Providing and fixing wash basin with C.I. brackets, 15 mm

Providing and fixing of p.v.c.water storage tank

Providing and fixing PTMT bib cock of approved quality and colour. 15 mm nominal bore, 165 mm long, weighing not lessthan 110 gms

Providing and fixing PTMT stop cock of approved quality and colour.15 mm nominal bore, 86 mm long, weighing not less than 88 gms

Providing and fixing PTMT grating of approved quality and colour. 125 mm nominal dia with 25 mm waste hole

Providing and fixing ball valve (brass) of approved quality, High or lowpressure, with plastic floats complete : 20 mm nominal bore

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, 15 mm nominal outer dia Pipes metre 246.20

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,20 mm nominal outer dia Pipes

making base of o.h.t.tank of brick masoneryin 1:4

20mm plaster in 1:3 cement,sand mortar over base of tank

providing and fixing of float valve 15 mm

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in

Providing and fixing of m.s. bat holder clamp 100 mm

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :

providing and fixing of /pvc nahani trap 110x90 75 mm

providing and fixing of pvc.horn bend 100x 75 mm

providing and fixing of Pvc.plane bend 100 mm

providing and fixing of /pvc door bend 75 m

providing and fixing of pvc.coller 75 m

providing and fixing of pvc.coller 100 mm

providing and fixing of P.v.c pipe 110 mm

providing and fixing of p.v.c.pipe 90 mm

providing and fixing of c.I.cowel guard 50mm

making conection of water supply line from main

Road Work

Excavation in foundation in black cotton soil (in Bundelkhand area) including lift upto 1.5 m. and lead upto 30 m. and including filling, watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by Engineer-in-charge a distance of 30 m. from the foundation trenches.

Cement concrete in 1:4:8 with cement, sand and 40mm granite stone ballast (crusher broken) in foundation including supply of all materials, labours and T&P etc. required for proper completion of the work . (Edging)

M 150 brick work in 1:4 cement and c. sand of 1.25 F.M. mortar in foundation and plinth including supply of all materials, labours and T&P etc. required for proper completion of the work .

Laying and consolidation of Av. 12cm. loose thick 22.4-53mm Granite stone ballast with 21% stone dust including supply of all materials, labours and T&P etc.(Road)

Supply and laying of 80mm thick precast inter Lock concrete block manufacturing by Rubber Mouleded making each in size and shape (35No. Per sqm.) of minimum compressive strength 300kg/sqm over 40mm thick average stone dust with joints 3 mm thick with stone dust including labour and tempring & sweeping etc. complete to work. (Road)

Cement, concrete with 1:2:4 cement, coarse sand and approved 20 mm. gauge granite stone grit including supply of all materials, labour and T&P etc. required for proper completion of work.

Earth filling in plinth including ramming dressing and extra cortage from 2 km leaddistance complete work at site.

Sewer Pipe Line

Earth work in excavation in trench for sewer line laying

base concrete in 1:5:10 cement:sand:sto ne ballast 40mm size in base top covering/haunching

Providing and fixing of p.v.c. pipe 4 kg/cm2

Boring & Hand Pump

Tube well Boring 4.5" dia by heavey Rig machine

Providing of 6 kg/cm2 Kisan make Casing pipe

Providing and fixing of KSB make submersiable Three phase 7 stage 2 HP pump(m.R.)

Providing and fixing starter pannel board

Providing and fixing of of sub. Cable

Providing and fixing of M.S.clamp

Providing and fixing of G.I. Pipe 32 mm dia B class meadium

Support Wire assembly with transporations & Wolding of Pipe Say

Cost of peagravel 200 mm tp. 3.35 mm size

Installation of pump labour/fixing

Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/casing Pipe ,removable as per requirement ,all complete for borewell. 200 mm dia

Providing and fixing Hand pump india Mark ii

Providing and fixing G.I.pipe 32mm dia

Providing and fixing Cylinder heavey duty

Providing and fixing Connecting Rod

Making platform of hand pump

Septic Tank 50 Users

Earth work in excavation in foundation/tank

Base concrete in 1:4:8 cement:sand:stone ballast

Brick work in 1:4 cement:sand mortar in septick

Brick work in 115mm wall in 1:4 cement : sand mortar baffle wall

R.c.c. work in 1:1.5:3 cement:sand:stone grit in Slab and beam

Providing cutting beding MS bar Reinforcement in slab @1.2%

20mm plaster in 1:3 cement:sand mortar with neat cement finish

P.c.c. in 1:2:4 cement:sand :stone grit in base to making slope

Providding and fixing C.I. man hole chembar 600x600mm size in slab

Providing and fixing C.I. vent pipe 100mm dia

Providing and fixing c.i. cowel guard 100mm dia

Providind and fixing 150mm dia inlet and out let pipe

Soak Pit Tank 50 Users

Earth work in excavation in foundation/tank

Brick work in 1:4 cement:sand mortar in soak pit tank wall

Supply and filling of Brick bat bat in soak pit in base

R.c.c. work in 1:1.5:3 cement:sand:stone grit in Slab

Providing cutting beding MS bar Reinforcement in slab @1%

Providind and fixing 150mm dia inlet and out let pipe

Septic Tank 5 Users

Excavation in foundation in Black cotton soil

Supply and filling of Sand

PCC in 1:4:8 in C:C/S:Ballast (40mm)

Brick work in foundation in 1:4 C:C/Smortar in S.T.

4½" Brick work in 1:4 C:C/Sand mortar in sides

R.C.C in 1:1½:3 C:C/S:S/G top Cover i/c all material labour t & p.

Cutting & binding of for steel

20mm Plaster with 1:4 C:C/S + neat cement

25mm P.C.C. flooring in 1:2:4 C:C/S:S/G

Soakpit Tank 5 User

Excavation in foundation in Black cotton soil

Honey comb brick work in 1:6 C.C./Sand

Brick bets filling in soak pit i/c all material labour t & p.

R.C.C. in 1:1½:3 C:C/S:S/G top cover i/c all material labour t & p.

Supply Cutting & Binding of for Steel

Internal Electrification Work

Wiring for light point / fan point / exhaust fan point / call bell point with 1.50 Sq. mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable G I box and earthing the point with 1.50 sq. mm FRLS PVC insulated copper conductor single core etc. as required.Group C

Wiring for twin control light point with 1.50 Sq. mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with 2 way modular switch, modular plate, suitable G I box and earthing the point with 1.50 sq. mm FRLS PVC insulated copper conductor single core etc. as required.

Supplying and fixing metal box of following sizes (normal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required. 200 mm x 250 mm x 60 mm deep

Wiring for circuit / submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit as required.2 x 2.50 sq. mm + 1 X 2.50 sq. mm earth wire

Wiring for circuit / submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit as required.2 x 1.50 sq. mm + 1 X 1.50 sq. mm earth wire

Wiring for light / power plug with 2 x 4.00 sq. mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, along with 1 No. 4.00 sq. mm FRLS PVC insulated copper conductor single core for loop earthing as required.

Wiring for circuit / submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit as required.2 x 6 sq. mm + 1 X 4.00 sq. mm earth wire

Wiring for circuit / submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit as required.2 x 10 sq. mm + 1 X 6.00 sq. mm earth wire

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but modular plate etc. as required.

Supplying and fixing modular blanking plate on the existing modular plate and switch box excluding modular plate as required.

Supplying and fixing suitable size G I box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.

Supplying and fixing suitable size G I box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

Supply and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.10 KV grade as required. 35 sq. mm

Supplying and fixing 5 A to 32 A rating, 250 / 415 V, 10 Ka, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. required. Single pole

Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. required. 40 Amp.

Supplying and fixing following rating, four pole, 240 V,(three phase and neutral )415 volts residul current breaker (RCCB) HAVING ASENSTIVITY CURRENT 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. required. 63 Amp.

Supply and fixing of Following way , single way and neutral , sheet steel , MCB Distribution board , 240v , on surafce / recess, complete with tinned copper bus bar , neutral bus bar , earth bus bar , din bar , interconnection , powder painted including earthing etc. as required 12 way Double door

Supply and fixing of Following way , surafce / recess,Vertical type ,415 v TPN MCB distribution board of sheet steel , dust protected duly powder painted , including of 200 a tinned copper bus bar , comman neutal link , earth bar , din bar for mounting MCBs etc. as required 4 way(4+12) Double door

Supplying and fixing of following modular switch / socket on the existing modular plate and switch box including connections but excluding modular plate etc. as required. modular base and cover plate for modular switches in recess etc. as required. 5 / 6 A Switch

Supplying and fixing of following modular switch / socket on the existing modular plate and switch box including connections but excluding modular plate etc. as required. modular base and cover plate for modular switches in recess etc. as required. 15 / 16 A Switch

Supplying and fixing of following modular switch / socket on the existing modular plate and switch box including connections but excluding modular plate etc. as required. modular base and cover plate for modular switches in recess etc. as required.3 pin 5 / 6 A socket outlet

Supplying and fixing of following modular switch / socket on the existing modular plate and switch box including connections but excluding modular plate etc. as required. modular base and cover plate for modular switches in recess etc. as required. 6 pin 15 / 16 A socket outlet

Supplying and fixing of suitable size G I box with modular plate and cover in front on surface or in recess, including providing and fixing 25 A modular socketlet and 25 A modular SP MCB, "C" curve including connections, painting ete. as required.

Supply and fixing of 100 Amp. Four pole Change over switch on 50 mm x 50 mm x 6 mm angle iron frame , including the cost of labour, T&P, painting and other material required for proper completion of the work as per direction and satisfaction of Engineer in charge.

Supply and laying of aluminium conducter, PVC insulated armoured, served, sheeted cable 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75mm thick sand alround and protected with burnt bricks on sides and top on surface, the cable run shall be fixed on M.S. clamps etc. of suitable size.as per direction of Engineer-Incharge.complete in all respect The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 35 sq. mm x 3½ core.

Supply and fixing of recess / surface mounting round 15 to 18 Watt cut out min 150 mm, Height Min 40 mm, LED Down lighter having with heat sink, diffuser die cast aluminium housing with heat sink, diffuser/Reflector and driver set, suitable for 24 Hr. Continuous Operation, complete in all respect. CAT: AAA, 1980 - 2200 system lumens, 110 lm/W, PF>0.95, THD<10%, at full load, CRI>80, with 5 year warranty.

Supply & fixing of 2' x 2' , 36 Watt to 46 Watt, indoor recess / surface mounting LED Square fitting for Armstrong ceiling having Powder coated CRCA housing body diffuser of special polycorbonate meterial and driver set,complete in all respects.CAT: AAA, 3960 - 5060, 70 mm height with fully covered diffuser type, system lumens, 110 lm/W, PF>0.95, THD<10%, at full load, CRI>80, with 5 year warranty.

Supply and fixing of LED Tube Light with Metal heavy duty Box type batten light fitting 1 x 22 Watt suitable for upto 1 X 22 W LED Polycarbonate tube light complete including tube etc. on surface complete in all respects. CAT: AAA, 2420 system lumens, 110 lm/W, PF>0.95,THD<10% at full load, CRI>80, Tube with aluminium heat with 5 year warranty.

Supply and fixing of water tight oblong 10 Watt LED Bulk head luminaire having die cast housing with driver set confirming to IP 65 and above protection, complete in all respects. CAT: AAA, 11000 system lumens, 110 lm/W, PF>0.95, with 5 year warranty.

Supply and laying of 25 mm x 3 mm G.I. Strip from earth electrode directly in the ground as requird complete in all respect.

Supply and burring of Safe Earthing Electrode T-19, (Hot Dip Galvanized), Length up to 3000 mm, Outer pipe 50 mm, inner pipe 25, terminal Dia 12 mm, outer G.I. pipe of 16 SWG and inner G.I. pipe of 12 SWG with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30cm square C.I. frame with hinged cover & masonry husing (from electrode terminal to switch board, cost of 25 mm x 3 mm G I strip will be extra) Complete in all respect.

Supply and fixing of danger board fabricated from 10 gauge M.S. sheet as per I E Rules.

Erection and testing of celling fan and regulator etc. excluding supply of down rad, complete in all respect.

Supply and fixing of 16 SWG M S drum with louvers duly painted including making hole in the wall for exhaust fan and finishing properly complete in all respect.

Supply and fixing of crimping, solderless, copper tin electroplated lugs of Dowells / Ismail make suitable for 1.50 sq. mm. to 6.00 sq. mm cables, including tapping with insulating tape, complete in all respect.

Supply and fixing of Fire extinguisher, ABC type 6.00Kg. Capacity ISI marked IS15683 & TAC approved complete in all respect.

Supply and fixing of Fire extinguisher, CO2 type 4.5 Kg Capacity ISI marked IS15683 & TAC approved complete in all respect.

Supply and fixing of fire bucket, round bottom made of G I Sheet 9 - 11 litres capacity duly painted as per fire brigade design, supported on hanging bracket chined and locked, initially filled with fine river sand, water as per directions of Engineer-in-charge.

Supply and fixing of shock treatment chart (prescribed under I E rule) duly famed with glass complete in all respect.

Supply and fixing of 1800 mm x 900 mm X 12 mm thick chequred rubber matting of tested quqlity.

Supply and fixing of hexagonal / round G P fan box of approved make made up 1.0 mm thick ISI Marked G.P. sheet spot welded four to Eight holes of 25.40 mm for pipe entry of the box. Holes should be semi-shuttered type with 0.50 mm G P sheet made upper & lower cover duly screwed fitted with 300 mm round zink coted M.S. bar x 12 mm & brand name should be embossed. Fixing with wiring conduit laid in the R.C.C. roof before concreting along with supply of all material, labour, T&P etc. required for proper completion of work.

Supply of Ceiling fan 1200 mm sweep, Double ball bearing , Capacitor type ISI marked / Five star complete etc. Usha / Crompton / Bajaj / Khaitan make.

s/f of Wall Fan

s/f of Call bell

Supply of Light duty Exhaust fan (Not fresh air fan) 300 mm sweep, Double ball bearing complete in all respects. Usha / Crompton / Khaitan / Bajaj make.

Supply and fixing of fan box sheet on existing fan box complete in all respects.

Supply and fixing of LED Bulb 12 - 15 Watt, Bajaj / Crompton / Havells / Philips make.

s/f of Kit Kat fuse 100amp on wooden board etc complete.

Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 75 to 90 Watt. Confirming to IP 66 and above Protection complete in all respect.

S & F sheet steel enclosure surface/Flush mounting fitted with 30Amp. 2Pin and earth metal clad scraping earth plug and socket complete in all respect. as directed at site by Engineer in charge.

Supply and Insttalation of Split Type A.C. suitable for opration of AC supply 230 volt with harmeticaly siled with aircooled condensor moter capacitor and start run capacitor relay and over load protection internal unit with one indooe & one outdoor unit the condersor unit will be placed outside the room on tarrace awoid the noise including standered lenth of copper tubing covered with insulation tube. suitabl capacity 3 core copper cable and a bettery oprated remote. 2 TR BEE star rated 5 star EER 3.4 ( Invertor Technology )

M.S. Stand for out door unit with Paint

S/L of Drain pipe 2.5mm with insulation

Projector Work

86 Inches Interactive Panel with OPS, PTZ Camera & Mic, Brand - BRIO. Note :- Specifications Sheet attached herwith.

Installation/ Testing/ Commissioning / Programming for projector

M/S UMESH KUMAR THEKEDAR