Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹1.1 LAccepted-Finance | L-1 | Accepted-Finance Lowest |
Tender Value
₹1.1 L
EMD Value
₹2,214
Closing Date
18 Jan 2021, 6:00 pmClosed
Assistant Engineer (Elect)
SHQ BSF Raiganj PO Karnajora Raiganj Dist. Uttar Dinajpur W.B.
C/O 01 Nos Toilet BCL Block at Coy level BOP Domutha of 174 Bn BSF under SHQ BSF Raiganj HQ NB Ftr BSF SH EI Exhaust Fans
2021_BSF_607682_1
SHQ-RGJ/Tend-Elect/21/81-93 Dt. 04.01.21
Open Tender
Electrical Works
Works
180 days
O/O DIG SHQ BSF Raiganj
As per NIT
7 documents required · 7 mandatory
₹500
DIG SHQ BSF Raiganj
₹2,214
9 Feb 2021
6 Jan 2021
20 Jan 2021
6 Jan 2021
18 Jan 2021
6 Jan 2021
Amount
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq. mm. FRLS PVC insulated copper conductor single core cable etc. as required. (Group A)
Wiring for circuit/ submain wiring alongwith earth wire the following sizes FRLS PVC insulated copper conductor, single core cable in surface/ recess medium class PVC conduit as required. (2.1)2 x 1.5 sq. mm + 1 x 1.5 sq. mm
2 x 4 sq. mm + 1 x 4 sq. mm
Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required. (a) 200 mm X 300 mm X 60 mm deep (For loose wire box)
Supplying and fixing metal box of 150 mm X 75 mm X 60 mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 A socket outlet and 5/6 A piano type switch, connections, painting etc. as required.
Supplying and fixing metal box of 180 mm X 100 mm X 60 mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 A & 15/16 A socket outlet and 15/16 A piano type switch, connections, painting etc. as required.
Supplying and fixing 3 pin 5 amps Ceiling rose on the existing junction box/ wooden block including connection etc. as required.
Supplying and fixing PVC batten/ angle holder including connections etc. as required.
Supplying and fixing 6 way, Double door, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. (9.1)Single pole
Double pole
Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/coke and salt as required.
Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation andre-filling as required
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.
Providing, laying and fixing 50 mm dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep) and re-filling etc. as required
Supplying and making end termination with brass compression gland and aluminium lugs for 2 X 25 sq. mm (22 mm) size of PVC insulated and PVC sheathed/ XLPE aluminium conductor cable of 1.1 KV grade as required.
Numbering of ceiling fan/ exhaust fan/ fluorescent fittings as required.
Supplying and laying of one number PVC insulated and PVC sheathed/ XLPE, galvanised steel strip armoured power cable of 1.1 KV grade ISI marked of 2 x 25 sq. mm size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required. (KEI or it's equivalent to Havells/HPL/Polycab make)
Supplying and fixing of one number PVC insulated and PVC sheathed/ XLPE, galvanised steel strip armoured power cable of 1.1 KV grade of 2 x 25 sq. mm size on wall/pole/surface as required. (KEI or its equivalent to Havell's/HPL/Polycab)
SITC of vertical wall mounting type electric water heater of capacity 25 Ltr, 2 KW, 5 Star rating including one pair of flexible PVC connection pipe along with locking nut, bolt and washers etc. complete as required. (Model No. Monza DX/ Senzo of Havells make or it's equivalent to Venus/Bajaj/CG make)
Supply and fixing of 20 watt LED tubelight of ultra slim round profile with extruded polycarbonate and all internal accessories including connection, testing etc. complete as required. (E-Lite LED Pride Plus, Cat. No. LHEXBLP7PN1W020 Havells make or its equivalent to Philips/Bajaj/CG make)
Supply and fixing of 12 watt white light LED surface mounted downlight with integrated electronic driver in ceiling complete with all accessories including connections etc. as required. (Comet ROUND Cat. No. LHEAAVP7IL1W012 Havells make or it's equivalent to C&S/Bajaj/Philips/CG make)
Supply and installation 300 mm exhaust fan of double ball bearing light duty motor with protective bird guard and louvers shutters complete with frame in the existing opening, including, making good the damage, connection, testing, commissioning etc. as required. (USHA Model No. Turbo LD Jet Dix/Havells/Khaitan make)
Supply and fixing of 7 watt LED retrofit lamp B-22 holder base with polycarbonate body and aluminium heat sink etc. as required. (Havells or Philips/Bajaj/CG make)
Providing and fixing 25 watt LED street light luminaire IP66 Protection, heat resistant toughened glass with frame, pressure dia cast aluminium housing, better optics for uniform distribution with the help of 1.5 mtr long 40 mm dia GI pipe B class suitably bent to the require shape with clamp, nuts and bolts including connection with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required. (Endura Pearl Plus Cat. No. ENDURAPEARLSL25WLED757SASYTOPCMP Havells make or its equivalent to Philips/CG/Bajaj make)
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .