Construction expansion of existing cancer hospital building at IGMC Shimla SH Providing Central heating system therein

Amount

Supply installation testing and commissioning of Electric Element type Hot Water Boiler /Generator complete with S.Body Cylindrical shell 10mm with dish ends, metal enclosure, integral electrical and control panel including all operational and safety controls. The Boiler shall be Horizontal type capacity of 250KW (50kW X 5 Steps), bank will consist five steps with microprocessor intelligent step controller and reverse flow sensor, including making CC foundation and complete in all respects. ( Make: Rapid Cool Model 250DS/ Dyna Flow/Ventair or any other approved by the Engineer-in-Charge.)

Supplying, installation, testing & commissioning of Hot Water Coupled Pump Set having mechanical seal, GM impeller suitable to deliver 32LPS at 20 Meter head centrifugal 2900 RPM with 12.5 HP Squirrel cage /TEFC induction motor & making suitable CC (Cement : Concrete) foundation connection etc. as required. (Make:- Kriloskar / Alstom/ Crompton or any other approved by the Engineer-in-Charge.)

Supplying, installation, testing & commissioning of Make up water monoblock pump set having mechanical seal, gun metal impeller suitable to deliver min 120LPM at 25 Meter head centrifugal monoblock 2900 RPM with 3 HP Squirrel cage /TEFC induction motor & making suitable CC (Cement Concrete) foundation , connection etc. as required.(Make:- Kriloskar / Alstom/Crompton or any other approved by the Engineer-in-Charge.)

Supplying, installation, testing & commissioning of compact type, Hi static Hiwall mounted power coated Hot Water Fancy Forced air Radiator Unit of following capacity free air discharge capacity complete with fan blower suitable for operation on single phase 230 V 50 Hz AC supply complete with finned hot water finned coil. air filter washable complete with thermostate modulating valve / ¾ brass ball valve with strainer on inlet and 3/4" brass ball valve on outlet complete as required. (Make:- Airef / Ventair/ Rapidcool / modren engineering or any other approved by the Engineer-in-Charge.)

Supply, installation, testing and commissioning of Hot water piping and fittings complete with supports,hangers and specified insulation thickness. All piping shall be black mild steel Class C, ISI marked with fitting. The unit rate of piping shall include this support arrangement and hangers i/c wooden saddles where required under insulation at support points. The piping shall be insulated with 80Kg/ M.Cub. section density fiberglass insulation finally covered with 26 gauge A1. Cladding for outside and 6mm plaster for inside complete as required. (Make:- Tata/Jindal or any other approved by the Engineer-in-Charge.)

125 mm pipe with 100 mm insulation

100 mm pipe with 100 mm insulation

80 mm pipe with 75 mm insulation

62 mm pipe with 75 mm insulation

50 mm pipe with 75 mm insulation

38 mm pipe with 50 mm insulation.

32 mm pipe with 50 mm insulation.

25 mm pipe with 50 mm insulation.

19 mm pipe with 50 mm insulation.

Supply, installation, testing and commissioning of Gate valves/ Sluice valves ISI marked, with flanges or screwed ends as required. Valves 65 mm and above shall of Cole Body , with flanged ends andgunmetal trim, non-rising spindles ,P N. 1.6 and i/c flanges where required and valves upto 50mm shall be gunmetal non rising stem, integral seat, body test pressure 50kgf/cm Hyd (MAKE:Krisloskar/Sant/Leader or any other approved by Engineer-in-Charge.)

Supply, installation, testing and commissioning of Swing Check valve straight type (BS 5153) class 125 body material cast iron IBR 86 to 93Grade A Bolted cover renewable seat , renewable disc SS trim working pressure 10.54 kg/cm with flanged ends including flanges cornplete as required . (Make: Kirloskar/Sant/Leader or any other approved by the Engineer-in-Charge.)

Supply, installation, testing and commissioning of Y type Stainer, body material cast iron IBR 86 to 93 grade A bolted cover SS304 trim working pressure 150 psi with flanged ends and tested to 150PSl. i/c flanges. (Make: Kirloskar/Sant/Leader or any other approved by the Engineer-in-Charge.)

Supplying, laying / fixing, testing & commissioning of following sizes of Non-insulated MS piping conforming to IS 3589 class - C with necessary clamps supports, vibration isolators, hangers, fittings such as bends, tees, reducers etc as required. (Make:- Tata, Jindal or any other approved by the Engineer-in-Charge.)

50 mm Diameter.

38 mm Diameter.

32 mm Diameter.

19 mm Diameter.

Supply and installation of M.S. expansion tank 1800 ltrs. capacity fabricated from 6 mm thick MS plates complete with base frame , air vent and 75 mm insulation with 24 gauge Al cladding. as required complete in all aspects.

Supply installtion testing & commissioning of (Main Electrical control Panel ) MB panel board fabricated from 2 mm thick C R CA steel sheet seven tank process powder coated floor mounted sectionlised cubical type with 3 phase 1500 Amp bus bars i/c making the interior connections painting etc. comprising as per following specification. The panel shall be cubical type multi-tier fully enclosed, floor mounted a and shall be provided. Supply installation testing and commissioning of power control centre (P.C.C.) and Motor Control Centre (M.C.C.) as follows:

Incomer :-

Outgoing :-

Providing, laying and fixing of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade on surface etc. of the required size:-

Armoured cable 16 sq. mm (4 core)

Armoured cable 630 sq. mm (3.5 core)

Armoured cable 400 sq. mm (3.5 core)

Earthing with copper earth plate 600 mm X600 mm X 3 mm thick, including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as required.

Extra for using salt and charcoal for G.I. or copper plate earth electrode complete as required.

Providing and fixing 25mm x 5mm copper strip in 40 mm dia. G.I. pipe from earth electrode etc. as required.

Comfort technologies