82646 SPECIAL REPAIRS TO BUILDING NO P-1 (TS HALL) AT TS AVADI UNDER AGE(I) NAVY CHENNAI

Amount

SCHEDULE 'A'[ B/R WORKS]

Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing and rubbish off the premises complete all as directed.

M&L vitrified ceramic tiles 10mm thick (Square/rectangular) area of each tile not exceeding 0.36 sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match inluding Screed bed or bedding layer of mortar 15 mm thick in CM 1:6 for laying floor finishes complete all as specified.

All as per above item 03 but in vertical surfaces and jointed in neat cement slurry and pointed in white or coloured cement to match including backing coat of 10mm thick in CM 1:4 on brickwalls for skirting/DADO complete all as specified and as directed.

M&L Non Skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match. Including 15 mm thick screed bed in CM 1:6 in floors etc complete all as specified and as directed

M&L for 300x450X7mm thick glazed ceramic tiles in vertical surfaces set and jointed in neat cement slurry pointed in coloured cement to match over rendering 10 mm thick on fair faces of brick work in CM (1:4) complete all as specified and directed.

Taking up or down steel tubing and connection including removed to store, 15 mm dia bore complete all as specified and directed

Taking up or down steel tubing and connection including removed to store, 20 mm dia bore complete all as specified and directed

M&L for Cutting chases, pinning in , for concealed water tubing on brick or stone walls, making good to facing where required and pointing in cement mortar 1:3, not exc 10 cm girth complete all as specified and directed.

Supplying and laying in repairs of CPVC pipes of outer dia of pipe 20mm SDR 11.00 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed

Supplying and laying in repairs of CPVC pipes of outer dia of pipe 25mm SDR 11.00 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed

S&F in repair vitreous China wash down water closet pan (pedestal pattern) white,incl. P or S Trap trap, connection to drain and flushing pipe including seat cover for pedstal pan complete all as specified and as directed.

S&F in repairs vitreous China wash basin white, flat back,size 550X400 mm including cutting for pinning in ends of brackets,complete all as specified and as directed.

S&F in repairs 10 litre capacity PVC low level flushing cistern with all accessories complete fixed with WC including syphone pipe, PVC flushing pipe of size 32mm dia complete all as specified and directed.

S&F in repairs 15mm dia bore stop cock/angle cock, cast fancy type chromium plated screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe on for unions and fixed complete all as specified and as directed.

S&F PVC connection 15mm dia and 600mm long with PTMT nuts complete all as directed.

S&F in repairs CP brass chromium plated shower rose 125 mm size fixed to 15mm pipe of revolving typecomplete all as specified and as directed.

S&F as in repair grating square 150mm size of PTMT(minimum 100 gms) complete all as specified.

S&F in repairs bib taps fancy type 15mm dia bore, chromium plated, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified and as directed.

M&L in repair 75 mm dia PVC(SWR) floor trap with grating including jointing with solvent cement complete all as specified and directed.

M&L in repair 110mm dia PVC(SWR) gully trapsetting and hoisting with solvent cement complete all as specified and directed.

S & F in repairs PVC (SWR) Nahani trap 75mm dia outlet with stainless steel grating suitable for floor trap including jointing to waste pipe fixed in cement concrete 1:2:4, type B-1 complete all as directed.

S&F in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed.

Supply and Fix in repair Vitreous China bowl Urinal , flat back, size of 465 x 355 x 265mm white (miniumum), with grating and union fo discharege pipe including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs brass screws pointing around urinal for discharge pipe complete and fixed in repairs complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks 500 ltrs capacity (White colour), three layer (cylindrical or vertical with closed top) hoisted and fixed in position, including dismantling the existing one and removing to MES storeyard, including Dismantling water tanks complete all as specified and as directed.

S&F in repair for 20 mm dia bore Ball valves, high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipe and fixed (Minimum weight 20 mm - 210 gms) all as specified and as directed.

S&F in repairs 20 mm dia gun metal, globe or gate valves, with iron head, screwed both ends for iron pipe all as specified and as directed.

S&F in repairs Towel rail 600 mm long of PTMT fixed with including chromium plated brass screws and wooden/plastic cleats (minimum weight 190 gms) all as specified and as directed.

S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position in repairs complete in all respect as specified.

S&F 75mm in repairs PVC (SWR) pipes double socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

S&F in repairs PVC connection of 15mm dia with brass nuts 450mm long fixed with pipes etc complete all as specified and as directed.

Supply and fix in repairs waste fittings brass chromium plated 32 mm for sinks/basin/urinal etc with long screwed shanks and fly nuts flange end bedded in red lead cement and other end fixed complete all as specified and as directed.

Taking down shutters of any description not exc 1 Sqm each complete all as specified and as directed.

Taking down chowkats or frames exc 1.5 sqm but n. exc 4 Sqm each with shutter (without taking off shutter from the frame) and Complete all as specified.

S&F second class hard wood plain , solid , straight , chowkats and frames wrought , framed rebated on the soilid rounded or chamfered put together with glue pinned at joints complete all as specified and as directed.

S&F 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides including 6mm thick teak wood lipping complete all as specified and as directed.

S&F for 35mm thick Plain, framed, panelled shutters of 2nd class hard wood (two panel), with lock rail and panels of 9mm BWP commercial ply or 12mm veneered perticle board with commercial veneering on both faces, the size of rail and style as per IS : 1003 (part-I), kiln seasoned chemically pressure treated complete all as specified and as directed.

S&F 30 mm thick second class hard wood , glazed and skelton shutters open rebated and prepared to receive glass, guaze etc (without sash bar) fitted with cut and mitred breads for securing glass etc stiles and rails, size at members of shutters as specified in SSR Pt-I sec 8, clause 8.20 (b) complete all as specified and as directed.

S & F powder coated aluminium frame for doors , windows etc with one or more rebates including necessary joining cleats (minimum thickness of powder coating 50 micron) complete all as specified and directed

S & F Anodised Powder coated aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats,glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges,anodised aluminum snap beading screws etc. complete all as specified (minimum thickness of powder coating 50 micron)

S&F anodised powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as hinges,suitable handle (1 No.) complete all as specified (minimum thickness of powder coating 50 micron) complete all as specified and as directed by the Engineer-in-Charge.

Supply and fix Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin-charge.

S & F Mild steel Angles, bars, flats etc., as in supports for stiffening of fencing, wall ties, hold fasts, clamps, plain angle cleats for securing purlins and similar small articles confirming to Fe 410-O 0r Fe 310-O complete all as specified and as directed.

M&L Providing PCC Type B1 1:2:4 (20mm graded aggregate) in as in hold fast fixing complete all as specified and as directed.

S&F 125 mm butt hinges, medium weight, cold rolled mild steel and fixed complete all as specified and as directed.

S&F 75 mm butt hinges, medium weight, cold rolled mild steel and fixed complete all as specified and as directed.

S & F Aluminium anodised barrel tower bolt all as above but 150mm long complete all as specified and as directed.

S & F Aluminium anodised barrel tower bolt all as above but 75mm long complete all as specified and as directed.

S&F extruded aluminium alloy handles fabricated types, anodised, each 150mm long complete all as specified and as directed.

S&F extruded aluminium alloy handles fabricated types, anodised, each 100mm long complete all as specified and as directed.

S&F 300mm long Aluminium, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded section all as specified.

S & F of Floor door stopper 150 mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed.

M & L in repairs Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed.

S & F 4mm thick sheet glass, ordinary quality, in squares n.exc 0.5 sq.m each panel complete all as specified and as directed.

S & F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

S & F in repairs of steel rolling shutters, without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated complete; push pull or manual type complete all as specified and as directed.

Material and Labour for complete removal of existing treatment on walls including washing down, rubbing down by vacuum based sanding machine and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces in camouflage pattern using mechanical tool/auto roller complete all as per manufacturer instruction and including necessary scaffoldings etc etc complete all as specified and directed. Note: All work shall be carried out by approved applicator of paint manufacturer only. The same shall be approved before carrying out the work from AGE(I). Contractor should submit Auth applicator certificate before execution of work.

Material and Labour for complete removal of existing surfaces including washing / rubbing down with water of wall by vacuum based sanding machine and applying two coats of oil bound distemper/emulsion over a coat of alkali resistant primer including chalk whiting 3mm thick wall care putty using mechanical tool/auto roller complete all as per manufacturer instruction and including necessary scaffoldings as reqd etc complete all as specified and directed . Note: All work shall be carried out by approved applicator of paint manufacturer only. The same shall be approved before carrying out the work from AGE(I). Contractor should submit Auth applicator certificate before execution of work.

M&L complete removal of existing painted ceiling surfaces by vacuum based sanding machine and applying two coats of Oil bound distemper over a coat of primer including preparation of old surface using mechanical tool/auto roller complete all as per manufacturer instruction complete all as specified and as directed. Note: All work shall be carried out by approved applicator of paint manufacturer only. The same shall be approved before carrying out the work from AGE(I). Contractor should submit Auth applicator certificate before execution of work.

M&L for preparation of old painted surfaces of wood or wood based surfaces over 10cm width or girth and applying one coat of synthetic enamel paint on wooden surfaces complete all as specified and as directed.

M&L for preparation of old painted steel/roof surfaces any description over 10cm girth and applying one finishing coat of synthetic enamel paint on steel surfaces complete all as specified and as directed.

S & F Aluminimum snap grid false ceiling of grid size 605 x 605mm Anodised frame work for false ceiling including S&F Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and as directed including applying one coats of Oil bound distemper over one coat of primer on vesible side of False Ceiling boards including Dismantling of existing old Wall and ceiling boards any type all as specified and as directed.

Supply and fix Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick as per approved profile of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws or L type or J type or cranked hook bolts or as per manufacturer instruction and upto height 10 metre and including necessary scaffolding all as specified and as directed.

Dismantling brick tiles or terracing tiles, single layer on roofs including cement screed in roof complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for upto existing RCC roof top surfaces complete all as specified and directed and removed debris outside the MD land complete all as specified and directed.

M and L for PCC 1:2:4 type B-0, (using 20mm graded aggregate) as padding concrete over roof complete all as specified and as directed.

Supply and laying the APP polymeric water proofing membarance of 3 kg/sqm of black finished reinforced with non-woven poleyster matt. With a thermofusible finish laid over 1.5 kg/sqm bitumen grade 85/25 over compatible bitumen primer at the rate of 1.20 Kg/Sqm torching overlaps with a propane or a butane gas torch with a overlap of 75 mm at the sides and 100 mm at the ends and sealing applying a coat of cold emulsion bituminous primer all as per manufacturers instructions, over and including 10 mm thick cement mortar 1:4 plastering to be finished even and smooth (without using extra lime or cement) using WPC @ 3% per cement bag or manufacturing instruction and applying two coat of aluminium paint over APP, complete all as specified and directed. Note : Water proofing compound shall measured and paid seperately

Supply only liquid water proofing compound complete all as specified and directed.

M & L for Cement concrete tiles 300 x300 x 25mm thick machine pressed, set jointed and pointed in neat cement slurry in floors with grey cement and pigments including and over a coat of 20mm thick screed bed in CM 1:4 complete all as specified and directed.

Surface excavation n exc 30cm deep and averaging 15cm deep and getting out in any type of soil complete all as specified and directed.

M & L for hardcore of guage n exc 63mm, deposited,spread and levelled in layers n exc 15cm thick, watered and rammed to a true surface of a broken stone or boulders complete all as specified and directed.

M&L for 100mm thick PCC 1:4:8, type D-2 in sub base of floor using 40mm graded aggregate complete all as specified and directed

S&F PVC tiles/sheets of thickness 3.0 mm laminated, plain coloured, marbled mosaic or mottled finish, laid with approved rubber based adhesive in floors including Taking down old damaged PVC tiles/sheets of any thickness all as specified and as directed.

S & F of Framed work such as grills,gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes;framed guard bars; barred iron doors;ladders;framed balusters;walk ways;railings;framework of water tanks and similar work conforming to Fe 290,Gde-E-165 complete all as specified and directed.

SCHEDULE 'A' [ E/M WORKS]

Taking down DB/main switch of any size and making good disturbed surface of wall/floor complete all as specified.

Taking down carefully sub-main wiring of any description and making good to ther disturbed surfaces to match the existing all as specified and as directed by Eng-in-Charge.

M & L for sub main wiring complete with two single core 10 Sqmm FRLS PVC insulated unsheathed stranded copper conductor cable drawn through in and including 25 mm dia rigid non-metallic PVC conduit heavy grade and conduit accessories including one run 10 Sqmm FRLS PVC insulated unsheated stranded copper earth cable connected to common earth dolly complete and including cutting chasing in walls for concealed wiring using machine cutting and making good the disturbed surface all as specified and directed Note: 3 run of 10 sqmm & one run of PVC conduit shall be measured as single unit

M & L for sub main wiring complete with two single core 4 Sqmm FRLS PVC insulated unsheathed stranded copper conductor cable drawn through in and including 20 mm dia rigid non-metallic PVC conduit heavy grade and conduit accessories including 4 Sqmm FRLS PVC insulated unsheated stranded copper earth cable connected to common earth dolly complete and including cutting chasing in walls for concealed wiring using machine cutting and making good the disturbed surface all as specified and directed. Note: 3 run of 4 sqmm & one run of PVC conduit shall be measured as single unit

Taking down carefully any type point wiring (light, fans, socket etc) complete including battens and fittings such as switch, ceiling rose, light fittings, regulators, socket, etc. and making good disturbed surface of wall/floor, etc. complete all as specified and as directed.

M & L for point wiring concealed in walls and surface on ceiling complete with FRLS PVC insulated unsheathed 1100 Volts grade, conforming to IS-694, 1.5 sq mm (nominal area) multi stranded copper conductor cable drawn though in and including non metallic medium grade rigid PVC conduit heavy grade accessories, ISI marked, 19/20 mm dia including all accessories, concealed in walls by cutting chases using machine and making good the disturbed surface, with and including suitable 1.5 sq mm copper earth continuity wire connected to earth dolly complete for the following complete all as specified and as directed.

(a) One light point controlled by one switch

(b) One fan point controlled by one switch

(c) One exhaust fan point controlled by one switch.

(d) One bell/ buzzer point controlled by one push switch.

(e) One switch socket outlet modular type 3 pin 6 amp on same board.

All as per above item No. 83 but 1.5 sq mm cable size and 1.5 sq mm earth continuity wire for one 3 pin socket outlet, 6 amps on Independent board complete all as specified and as directed.

All as per above item No. 83 but 2.5 sq mm cable size with 2.5 sq mm earth continuity wire for one 3 pin socket outlet, 16 Amps on independent board complete all as specified and as directed.

S & F Switch modular type, single pole one way 6 Amps complete all as specified and as directed.

S & F 0-4 step, one module, modular type electronic regulator for ceiling fan 1200 mm sweep, 240 volts, 100 Watts humfree single pole, all as specified and as directed.

S & F bell push switch, modular type, 6 Amps, 1 module, 240 volts all as specified and as directed .

Supply and fixing calling bell Ding Dong type , AC, single pole one way 240 volts complete all as specified and as directed.

S & F socket modular type 6 Amps,240 volts all as specified and as directed.

M & L for ceiling rose, surface bakelite, 65 x 50 mm, two to three terminals all as specified and as directed.

S & F switch modular type 16 Amps, 240 volts all as specified and as directed.

S & F socket modular type 16 Amps, 3 pin combine, 2 module,240 volts all as specified and as directed.

S & F for Modular white cover plate with frame,1 or 2 Module complete all as specified and as directed.

S & F for Modular white cover plate with frame,3 Module complete all as specified and as directed.

S & F for Modular white cover plate with frame,6 Module complete all as specified and as directed.

S & F for Modular white cover plate with frame,8 Module complete all as specified and as directed.

S & F for Modular Metal flush box,1 or 2 Module complete all as specified and as directed.

S & F for Modular Metal flush box,3 Module complete all as specified and as directed.

S & F for Modular Metal flush box,6 Module complete all as specified and as directed.

S & F for Modular Metal flush box,8 Module complete all as specified and as directed.

Supply and fix Power unit for 1.5/2 ton A.C including connecting electric connections, complete all as specified and as directed. Make :- Legrand 6755 58 or equivalent as mentioned in list of makes as approved by AGE(I)

Supply and Fix wall mounted LED batten with decorative end cap of capacity 4feet 20W or nearest higher wattage ,2500 lm ,6500 K suitable for Surface, Wall & Conduit mounting complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size and lamp complete all as specified and directed internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size. complete all as specified and directed .

Supply and fix LED light fitting 2 feet,10 W or nearest higher wattage,230v,suitable for Surface, Wall & Conduit mounting, with integrated LED driver, etc. complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size all as specified and as directed.

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed.

S & F sheet metal enclosures for DB's for incorporating MCBs, VTPN, 8 way, IP-43 with metal double door with 250 amps rated busbar, 415 volts, as per IS-8623 including taking down the old unserviceable TPN DB, all as specified and as directed.

S & F MCCB TPN, 100 Amps, breaking capacity 16 KA, 415 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc.

S & F sheet metal enclosures for SPN DB's with metal double door for incorporating MCBs,IP-43 , 8 way with 200 amps rated busbar, 240 volts, as per IS-8623 all as specified and as directed.

S & F MCB SPN, 40 Amps, breaking capacity 10 KA 'C' curve confirming to IS/IEC 60898-1 2002,integrated label holder, sliding bottom clamp , IP 20 protected terminal, sliding shutters, 240 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc. complete all as specified and as directed.

S & F MCB SP 40 Amps, breaking capacity 10 KA 'B' curve confirming to IS/IEC 60898-1 2002,integrated label holder, sliding bottom clamp , IP 20 protected terminal, sliding shutters, 240 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc. complete all as specified and as directed.

S & F MCB SP 10-32 Amps, breaking capacity 10 KA 'B' curve confirming to IS/IEC 60898-1 2002,integrated label holder, sliding bottom clamp , IP 20 protected terminal, sliding shutters, 240 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc. complete all as specified and as directed.

M & L for earthing complete with galvanised steel earth plate electrode 60cm×60cm× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to 4 mm GI wire as earthing lead by means of bolts, nuts, check nuts and washers of copper all as shown in electrical plate No.3 in SSR part 1 connected to earthing test point,including 20 mm GI pipe (Medium grade) for watering and 15 mm GI pipe (Medium grade) for protection of earth wire and etc.. including testing on completion ,PCC chambers in PCC1:3:6 type C1, RCC M25 type cover slab 50mm thick with 8mm dia TMT HCR/CRS steel bars at 140mm C/C both way and lifting handle GI funnel & wiremesh ,funnel,lugs and charcoal,salt etc all as applicable complete all as specified and as directed by the Engineer-in-Charge.

M & L for Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4mm dia galvanised iron or steel wire all as specified and as directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers and testing complete and taking down old unserviceable fan & depositing to MES store complete all as specified and directed.

S&F of ceiling BLDC fan 1200mm sweep with complete set with fixtures, 5 Star rating , metallic body and taking down old unserviceable fan & depositing to MES store complete all as specified and directed.

Supply and fix Rigid non-metallic PVC conduit 25 mm heavy grade and conduit accessories inclusive of all tees, bends,elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc.complete all as specefied and as dirceted.

Supply and laying LT UG XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 50 sq. mm,3.5 core and connecting up to the electrical system with suitable size of aluminium lugs complete all as specified and directed.

M&L for Excavation in trenches in Soft/loose soil not exceeding 1.5 meter wide and not exceeding 1.5M in depth for laying of cables/pole and getting out of excavated material complete all as specified and directed.

M&L for Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick each, excavated soil in trenches after the pipes have been laid and tested complete all as specified and directed.

M&L for Removing excavated soil to a distance not exceeding 50 meter and depositing where directed at a level not exceeding 1.50 meter above the starting point complete all as specified and directed.

Supply and fixing High density poythelyne (HDPE) pipes PN 10 of pressure rating 6kgf/ sq/ m of size 65 mm for cable protection laid in trenches complete all as specified and directed

SAI SRI HARSHA ENTERPRISES (BID ID -3259161)

JANANIKARTHIK ENTERPRISES (BID ID -3256567)

HIGH TECH ENGINEERS AND CO (BID ID -3262598)

DJ Group (BID ID -3256754)

Banyan Engineers and Contractors (BID ID -3256428)

srilakshmi industries (BID ID -3261530)

silambarasan (BID ID -3253564)

SIRITEL SYSTEMS PRIVATE LIMITED (BID ID -3256422)

lakshmibuilders (BID ID -3256605)