Manufacture, fabrication, supply, erection, testing and commissioning of 33/11 KV SS with 1X8 MVA Power transformers, associated equipments, accessories, control panels at Elagiri and 33KV Bay Extension at 110KV Vaniyambadi SS in Tirupathur EDC

WORKS DETAILS

33/11 KV NEW SS WORKS.

BoQ_Ver4.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only)

NUMBER #

nd dismatling the templete after concreting including cost of labour,cost of template, lead, lift, etc., complete.

11KV (LV) VCB (out door) 12 KV, 1250A, 26.3kA per 3 Sec., 3 pole Gang operated Solid Dielectric Insulated with Permanent Magnetic Actuator operating Mechanism with inbuilt VCB Bushing embedded Dry Type Epoxy Resin Cast CT (1200-600/1-1A) with structure and complete Accessories

33KV Potential Transformer with TC (Single phase unit)

AC Panel for 33KV SS

110V DC indoor C&R Panel for GC Breaker

110 V DC indoor C&R Panel for Twin feeder

14C x 2.5 Sq.mm Copper cable armoured

8C x 4 Sq.mm Copper cable armoured

4C x 4 Sq.mm Copper cable armoured

4C x 2.5 Sq.mm Copper cable armoured

2C x 2.5 Sq.mm Copper cable armoured

Supplying and fabricating and placing in position of MS/RTS steel reinforcement for RCC works including labour for cutting, bending, tying and fixing in position as per specification including cost of all materials, lead, lift, labour, cost of binding wire, etc., complete.

Lugs, ferrules, sleeves, cable tie, insulation tape and other accessories for providing cable core end termination

Supply of GS chequerred plate 6mm thickness

Supply of ISI mark bakelite HRC fuse holder with fuse of 16 Amps reputed make in panels/ boxes for AC/DC/PT circuits wherever required as directed by the field Engineer.

2.0" / 50 mm Aluminium Bus bar (Thickness:5 mm)

Supply of GS FLAT 65X10 mm for Earth Mat

Supply of GS FLAT 50X8 mm for Earth Mat

Supply of yard light stepped tubular pole 5M Length with base Plate including cost of LED light,Double pole MCB, fiittings,Junction box and painting in complete shape as per direction of field engineer.

Earthing layout board ( wooden / plastic / Aluminium) having the size of 1200mm x 600 mm and board covered with 3mm thick achorlic transparent sheet.

Supply of Enamel Paint including cost of paint, brush and consumables etc.,

Supply of PVC stickers for Breakers,Panels,chargers and General Key Boards as required and as directed by field engineer

Supply of Fabricated main equipment board 2500 X 1500 mm out of 14 SWG M.S Sheet, alongwith painted MS Channels(100 x 50 MM) and MS Flat(65x65x6) (50x50x6) (50x6) and mounting the Board on to a Structure with all required hardware including foundation and lettering.

Supply of LC/ Key board of size 6x4 feet out of 75x 25 mm Alu. frame embedded with 12 mm pre laminated wood particle board using screw on rear 2 Nos plain glass of 5 mm thick fixed with metal roller moving on Alu.channel should be provided on front with locking arrangements. LG glass piece should be fastened on the glass shutters for opening and closing wall clamp made out of 6mm plate should be provided on as per drawing along with hook for keys with token and as directed by the field Engineer including cost of all materials.

Supply of M8, M9, M10, M12 & M16 full thread GI bolt, nuts & GI washer of various size with IS Grade for erection of insulator or any other purpose wherever required and as directed by the field Engineer.

BoQ_Ver4.0

Supply of Portable Dry Chemical Powder type cylindrical shape 5/6 KG capacity fire extinguisher wilth initial charge & complete with rubber or braided hose, dry powder with level indicator and all accessories confirming to the latest issue of ISI certification mark.

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only)

NUMBER #

Erection, Testing & Commissioning Charges for 8 MVA Power Transformer

Labour for erection of 33/22/11KV , PT, (one S.Ph or 3Ph. Unit) with provision of hardwares,etc. Using manual labour

Labour for laying of cable in duct/ trunch including the cost of Aluminium tag for identification. Upto 8Core

Labour for laying of cable in duct/ trench including the cost of Aluminium tag for identification. Above 8core

Labour for laying of cable & clamping in structure Upto 8 Core

Labour for laying of cable & clamping in structure above 8 Core

Labour charges for laying of 2C x 16 Sq.mm Copper Power cable armoured (2 runs) or one run of 4Cx16 sq.mm

Erection of 19 / 22 mm cable gland by providing required No. of holes in the gland plate/ panels and Mechanism/ Control cubical, removing the cable sheeths, cutting of armour to the required length and making up the cable with gland and fixing the cable with glands in the required location.

Erection of 28 mm cable gland by providing required No. of holes in the gland plate/ panels and Mechanism/ Control cubical, removing the cable sheeths, cutting of armour to the required length and making up the cable with gland and fixing the cable with glands in the required location.

Labour Charges for cable core end termination (Lugs, ferrules, sleeves, cable tie, insulation tape and other accessories )

Labour Charge for assembling of panel (Single Feeder) , including supply & fabrication of MS flat 65x10mm for mounting arrangement and earthing of panel including hardwares.(Simplex indoor/outdoor)

Labour for erection of AC Junction Box

Supply and fixing of 32 AMPS - 3 phase, 4 pole MCB of Havells/Schneider/ MDS/ Reputed make with ISI mark wherever required as directed by the field engineer.

Fixing of all types of fuse holder and fuse of all range whereever required as directed by the field Engineer

Labour for erection of Bus bar (with bends wherever necessary) using 50mm IPS Aluminium tube.

Labour for erection of LAS including erection of base if required Station type single/ Double pole stack 33 or 22 or 11KV with provision of hardwares,etc.,

Labour for erection of AB Switches, including erection of insulators and alignment works with provision of hardwares,etc., without earth hand operated 11 KV Station Transformer

Labour for erection of Isolator / AB Switches, including erection of insulators and alignment works with provision of hardwares,etc., without earth hand operated 33 or 22 or 11 KV

Labour for the Erection of 33 KV Strung Bus structure (4.5 m - Pole centre to Pole centre) the fabricated steel structures at the SS site with Supply of GI Bolts, Nuts & Washers (Spring/Flat as required) confirming to IS including Labour, machinery and Consumables as required & as directed by the field Engineer.

Labour for the Erection of 11 KV Feeder Bay Structures (4 m - Pole centre to Pole centre) with 3 Bays + 1 LV for 1 No. 8 MVA Power Transformer with painting

rawing. Fixing of GS Flat clamp of size 65 x 10 mm for Interconnecting the earth rod and GS earth flat risers by . Fixing of identification board of size 300x150mm of 14swg and 12mm M.S. Rod to be fixed to the board as directed by the field engineer.

Erection of LC/Keyboard as directed by the field Engineer including cost of all materials.

Earthwork excavating and depositing on bank with initial lead of 10m & initial lift of 2m in hard stiff clay stiff black cotton hard red earth, shales. Murram, gravel stoney earth, earth mixedwith small size boulders.

Earthwork excavating and depositing on bank with initial lead of 10m & initial lift of 2m in soft disintegrated rock laterite soft rock or kankar not requiring blasting, etc., complete.

Earthwork excavation in medium rock and dense medium rock not requiring blasting.

Supplying and filling of M sand in foundation and basement with well watering and consolidation as per specn. Including cost of all materials labour, lead, lift, etc., complete.

PCC 1:3:6 mix using 20mm HBS machine crushed metal for foundation including with out form work cost of all labour, materials, lead, lift, curing, etc., complete.

PCC 1:2:4 using 12-20mm HBS metal for structure concrete with form work including cost all materials lead, lifts,labour curing etc complete.

PCC 1:2:4 using 12-20mm HBS metal for support structures concrete with out formwork including cost all materials lead, lifts, labour curing etc complete

RCC 1:1.5:3 using 12-20mm (machine crushed) metal for raft foundation without formwork including cost of all materials, labour, lead, lift, etc., complete.

Plastering with CM.1:3 mix 12mm thick including cost of materials, labour,lead,lift,watering,curing,etc.,complete

Assembling of various plinth templates for providing concrete including transporting from one plinth to another, alingning fixing to correct level a

BoQ_Ver4.0

Supply of Portable Dry Chemical Powder type cylindrical shape 5/6 KG capacity fire extinguisher wilth initial charge & complete with rubber or braided hose, dry powder with level indicator and all accessories confirming to the latest issue of ISI certification mark.

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only)

NUMBER #

Fixing of PVC stickers for Breakers,Panels,chargers and General Key Boards and other works etc, as required and as directed by field engineer

14C x 2.5 Sq.mm Copper cable armoured

8C x 4 Sq.mm Copper cable armoured

4C x 4 Sq.mm Copper cable armoured

4C x 2.5 Sq.mm Copper cable armoured

2C x 2.5 Sq.mm Copper cable armoured

ISI mark 25 mm cable gland as directed by the field Engineer.

Lugs, ferrules, sleeves, cable tie, insulation tape and other accessories for providing cable core end termination

Zebra ACSR conductor

T Clamp for Zebra to Zebra

Switchend clamp for 2" Busbar

Corana Bell for 50mm Bus Bar

33KV Centre rotating AB switch along with PT Insulator without Support Structure

Supply of flexible copper tape 25x3 sqmm /12mm rope for interlinking panel earthing and for any other purpose, on any sizes, including the cost of copper lugs at both ends as directed by the field Engineer

Supply of GS FLAT 65X10 mm for Earth Mat

Supply of GS FLAT 50X8 mm for Earth Mat

Supply of Enamel Paint including cost of paint, brush and consumables etc.,

Supply of M8, M9, M10, M12 & M16 full thread GI bolt, nuts & GI washer of various size with IS Grade for erection of insulator or any other purpose wherever required and as directed by the field Engineer.

BoQ_Ver4.0

Supply of Portable Dry Chemical Powder type cylindrical shape 5/6 KG capacity fire extinguisher wilth initial charge & complete with rubber or braided hose, dry powder with level indicator and all accessories confirming to the latest issue of ISI certification mark.

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only)

NUMBER #

Labour for erection of 33/11 KV, 3 pole Gang operated Soild Dielectric Insulated with Permanent Magnetic Actuator operating Mechanism with inbuilt 33/11KV VCB Bushing embedded Dry Type Epoxy Resin Cast 33/11 KV CT with structure and complete Accessories and providing template

Labour for laying of cable in duct/ trunch including the cost of Aluminium tag for identification. Upto 8Core

Labour for laying of cable in duct/ trench including the cost of Aluminium tag for identification. Above 8core

Erection of 28 mm cable gland by providing required No. of holes in the gland plate/ panels and Mechanism/ Control cubical, removing the cable sheeths, cutting of armour to the required length and making up the cable with gland and fixing the cable with glands in the required location.

Labour Charges for cable core end termination (Lugs, ferrules, sleeves, cable tie, insulation tape and other accessories )

rawing. Fixing of GS Flat clamp of size 65 x 10 mm for Interconnecting the earth rod and GS earth flat risers by . Fixing of identification board of size 300x150mm of 14swg and 12mm M.S. Rod to be fixed to the board as directed by the field engineer.

Earthing - Earth mat, Spikes & Collar (Supply of6 m G S Rod of 40mm dia for conventional Earth Electrodes, A4 Grade Bentonite powder (30 Kg) and low resistivity red soil (for mixing with bentonite powder for refilling the pit with the mixed slurry)