Loading…
Loading…
Tender ID
Tender Value
₹2.2 L
EMD Value
₹5,500
Closing Date
22 Jul 2025, 11:00 pmClosed
Rural Development and Panchayat Raj Department
Construction of Handicap Toilet in the Primises of Govt. Primary School in Nelaganti Village of Gokak Taluk.
RDPR/2025-26/BD/WORK_INDENT17181
RDPR/2025-26/BD/WORK_INDENT17181
Open
Buildings
Two Tender Document System(Two Cover)
RDPR Gram Panchayat Office Suladhal TP Gokak
₹500
₹5,500
15 Jul 2025
15 Jul 2025
24 Jul 2025
21 Jul 2025
Construction of Handicap Toilet in the Primises of Govt. Primary School in Nelaganti Village of Gokak Taluk.
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 8-Item No. 1.14.1) m, as per drawing and technical specifications, including setting out, shoring, strutting, barr...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine ggregates as per relevant IS ...
Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement: 6 coarse sand: 12 graded stone aggregate 20 mm nominal size) upto...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Providing and laying in position Reinforced cement concrete for all Super structures of building, Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The g...
Providing Thermo-Mechanically Treated bars of grade Fe-500D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to djacent...
Providing Brick work with common burnt clay machine moulded perforated bricks of class designation 5.0 conforming to IS: 2222 in superstructure above plinth level in cement mortar 1:6 (1 cement: 6 coa...
Providing & fixing factory made PVC Door frame of size 50 x 47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long brack...
Providing & fixing 30mm thick factory made rigid foam Panelled Door Shutters made from M.S. tube of 19 gauge thickness, size 19 * 19mm for stiles and 15 * 15mm for top & bottom rails, covered with hea...
Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel...
Providing and laying Polished Glazed Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with wate absorption less than 0.08% and conforming to IS:15622, of ...
Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, roviding and removing scaffolding, inc...
Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement: 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 (1 ...
Finishing walls with textured exterior paint of required shade :New work (Two coats applied @3.28 Itr/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an even...
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after th...
Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually con...
KSRB 13-11: Providing and placing on terrace, polyethylene water storage tanks as per IS 12701: 1996 with manhole lid and suitable locking arrangements, making holes of suitable diameter for inlet, ou...
Supply and delivery at site GM (copper alloy) gate valves confirming to Class-l as per IS 778 with latest amendments, 1 No. screwed in bonnet inside screw, rising spring spindle integral seat screwed ...
Providing GM gland cocks tested against hydraulic pressure of 20 Kg/m² with ISI mark For 20 mm dia GM gland cocks (PWDSR 2023-24 Vol-2 P.No.132)
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .