Repairs Recarpeting PCC to damage road and Paver block work of Road and Westland Bajaria, Boundary wall and grill fencing work etc and drain work along ACC road of Westland area at O F Katni

Amount

Repairs/Recarpeting/PCC to damage road and Paver block work of Road & Westland Bajaria, Boundary wall & grill fencing work etc. and drain work along ACC road of Westland area at O.F. Katni.

Preparing surfaces old Black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc.

M & L using Paving bitumen Applying evenly a priming/tack coat with bituminous primer at 10 kg per 10 sq metre

M & L Premix bituminous, macadam using Binder content* Paving bitumen any penetration laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less). Average thicness 50 mm. *Binder content of 4% by weight of total mix.

M & L using Binder Paving bitumen Bituminous premixed carpet, 2cm consolidated thickness, with 0.27 cu.m. of stone chippings mixed with 14.6 kg of binder, rolled and compacted to required camber and gradient

M & L using Binder Paving bitumen Premixed sand seal coat with 0.06 cu.m. of sand mixed with 6.8 kg of bitumen, applied and rolled to a uniform smooth surface

M&L, Adequate No. of coats Painting lines, dashes, arrows, letters, etc. on roads, pavements and the like exc 10cm wide with road marking paint, white or golden yellow

Surface Dressing n.exc.15 cm deep in Soft/loose soil, all as specified and directed.

M&L, 100 mm thick Moorum/red bajri filling in road side berms or pavings including spreading, levelling, watering, ramming/ rolling and consolidated to gradient and camber required

M&L, Cement concrete work in pavement/ hard-standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre, thickness of concrete 25 cm or less

Finishing surface of concrete roads, pavements, by belting.

M&L, Forming 20 mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’ ; 250mm thick concrete slab. And provided with 20 mm dia mild steel dowel bars 50cm long (25cm in each slab) with ferrules, spaced at 300 mm centres, including boring form work and preformed filler for dowels

Form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits ( if any) of foundation and plinth beams; and similar work / Pavement / Hardstanding ; vertical or to batter; Flat fair finished concrete surfaces.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in Hard/dense soil.

M & L, CEMENT CONCRETE IN SUB-FLOORS, SUB-BASES, FLOORS AND PAVINGS, ETC. Cement concrete type B-2, 1:2:4 (40mm graded aggregate); 100mm thick .

M & L, Sand filling under floors or in foundations including watering and consolidation.

M&L Machine pressed precast concrete interlocking paver block any shape and size (colour, design & pattern approved by EIC) confirming to IS 15658-2006 of 80 mm thickness M-40 Grade with grey cement and pigments.

M&L, Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed cement mortar 1:3 (1 cement : 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm). including making drainage opening wherever required complete.

M&L, Brick work with sub class 'B' bricks, straight or curved on plan exc 6 M mean radius,built in 1:6 cemnt mortar.

M&L, Rendering 15 mm Thick on fair faces of brick work or concrete surfaces,rendering is to be finished even and smooth without using extra cement in 1 :4 cement mortar

S&F,Mild steel TMT bars 06mm to 08 mm dia and over,cut to length,bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dial or securing clips.

Excavation in trenches, n exc. 1.5M wide and n. exc. 1.5M in depth, for foundation etc. or for shafts, wells, cesspits, manholes etc. n. exc. 10 Sq. M. on plan and n. exc. 1.5m in depth and getting out, Soft/ loose Soils.

M & L, Cement concrete in foundation filling and mass concrete Type-C-2,1:3:6 (40 mm graded aggregate)

M & L, R.C.C. (nominal Mix)Type-B-1,1:2:4 (20 mm graded Aggregate) Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete.

M & L, R.C.C. (nominal Mix)Type-B-1,1:2:4 (20 mm graded Aggregate) Columns, pillars, piers, posts and struts.

Form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits ( if any) of foundation and plinth beams; and similar work;vertical or to batter.

Formwork to sides of pillars, posts, struts, piers, columns and stanchions.

S&F,Mild steel TMT bars 10 mm dia and over,cut to length,bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dial or securing clips.

S&F, Framed work such as grills, gratings, etc… with ends of bars shouldered and / or riveted or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framedwork of water tanks and similar work con-forming to FE290 gde-E-165.

Preparing of new plastered surfaces, PRIMING with Chalk whiting, on plastered surfaces, preparatory to distempering and two coats Distempering walls with cement paint, white or tinted.

M&L, PAINTING STEEL AND IRON SURFACES of any description, over 10cm in width or girth,not otherwise described, Preparation of New or previously untreated surfaces, Two coats synthetic enamel paint over one coat red oxide zinc chrome primer.

M & L, R.C.C. (nominal Mix)Type-B-1,1:2:4 (20 mm graded Aggregate) in walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings, including attached pillaster and buttresses.

Form work to faces of walls, retaining walls, abutments, parapets and similar work including attached pillaster and buttresses etc.; vertical or to batter.

M&L, Reinforced concrete pipes, class NP3, laid and jointed complete with collers, Bore of Pipe 600 mm.

Removal of Spoil / Removing excavated materials exc. 250 m but n. exc. 500m and deposited where directed.

Dhanlaxmi Merchandise Private Limited (BID ID -907732)

K K CONSTRUCTION (BID ID -914428)