Mandapam Camp Ramanadhapuram

Amount

Rewiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories with Module GI switch box on wall with 6A one way module switch with module front plate with painting of Suitable colour with continuous earth wire connection of 14 SWG TC wire for Open MS conduit Light point / fan point (for electronic regulator) ( 5 points / Coil) (SD 248)

Renewal bysupply and fixing of 18W LED square type Recessed fitting with LED (Higher end) on false Ceiling with suitable hanging support from ceiling with PVC unsheathed copper leads from terminals to the fitting. (SD 528)

Renewal by Supply and fix.ing of 9 w LED fancy Thorton Classic Wall Sconce fancy light with connection arrangements. ( Data 1 )

Renewal by Supply and fixing of 9 w LED Antique Big Wall Lamp fitting with connection arrangements. ( Data 2 )

Renewal by supply and fixing of 1 No. of Post top luminaire integrated with 2x30W LED Module of Chinar Lighting Pole KP4223 on 3.66 mtr decorative garden lighting pole of Slyvia Double Bracket KP4378 to be mounted on suitable concrete foundation with necessary bolts and nuts and Supply and fixing of 1no of 6A SP MCB (Legrand/ Hager make), 4way terminal block inside the built in Control box with PVC unsheathed copper leads from the terminals to the fitting. ( Data 3 )

Renewal by supply and laying of 2 x 10 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 mt. Layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good. (SD-198)

Supply and fixing of 65mm (2-1/2") GI pipe (Class 'B') of 6 metre length with 300mm x 300mm x 6mm MS base plate duly welded at the bottom with concreting with construction of masonary pedestal with suitable MS box to house 5A control switch 16A fuse unit (500V) etc with suitable angle iron frame work with door and with lock and key arrangements and with supply and fixing of 4'40W twin street light fluorescent fitting with copper chokes and condenser with fluorescent tubes with 1 metre of 32mm dia GI pipe (Class 'B') complete with necessary clamps on the above post with PVC unsheathed leads with painting of suitable colour (Data 4)

Renewal by supply and clamping of 2 x 10 sq.mm PVC LTUG armoured LTUG cable on post or on wall with MS Clamps. ( SD 216 )

Supply and fixing of 30W LED street light fitting with LED (Higher end) with 25 mm dia. GI pipe (class B) with 1 no. 25 mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting . ( SD 532 )

Supply and run of 2 of 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable heavy gauge MS conduit pipe concealed in wall and ceiling with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour( SD 43 )

Supply and fixing of 1200mm (48") sweep AC ceiling fan High speed complete with 2 module 100W fan step regulator (Higher end) with 300 mm down rod on the existing fan clamp. (SD 581 )

Supply and fixing of 375mm (15") sweep (light duty) AC exhaust fan complete with necessary wall opening and making of the wall. (SD-116)

Supply and fixing of louvers shutters arrangements for 375mm (15") sweep light duty AC Exhaust fan (SD 121)

Supply and fixing of 3nos.6A two module 5 pin socket , 3 nos. 6A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End ( for computer plug ) ( SD 476 )

Supply and fixing of 1 no.6/16A two module socket , 1 no. 16A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End ( SD 488 )

Renewal by Supply and Run of 2 of 2.5 sq.mm. (36/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable gauge MS conduit pipe on wall and ceiling with continuous earth wire connection of 14 SWG TC wire with painting of suitable colour. ( SD 399 )

Supply and fixing of 3 nos.6A two module socket , 1 no. 16A two module socket , 3 nos. 6A one module switch , 1 no. 16A one module switch on suitable module surface mounting Box (GI ) with module cover plate(plastic) on wall with connections. Higher End ( SD 522 )

Renewal by Supply and fixing of 20Amps DP Plug and socket in sheet enclosure with 32A DP MCB in flush with wall with earth connection (for AC plug) (Legrand (MDS)/Hager (L&T) make. (SD-140)

Renewal by Supply and run of 2 of 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable heavy gauge MS coundit pipe on wall and ceiling with continous earth wire connection of 14 SWG TC wire with painting of suitable colour. ( SD 44 )

Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 40A DP MCB Isolator as incoming and 10 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End ( SD 615 )

Supply and Run of 2 of 6 sq.mm. (84/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable gauge MS conduit pipe on wall and ceiling with continuous earth wire connection of 14 SWG TC wire with painting of suitable colour. ( SD 401 )

Supply and fixing of 7 segment 8 way 63A TPN MCB sheet steel distribution board (Higher end) with metal / acrylic door cover flush type /surface type fitted with busbars and neutral links with single / three phase MCB outgoings and seperate 4 way provision for accomodating one no. 4 pole incoming MCB / Isolator and another seperate 4 way provision for accomodating one no. 4 pole ELCB / RCD (totally 8 ways in one segment) (3x 6 ways in each segment) and seperate provision for MCB / Isolators ( totally 18 nos.) for sub incomers in 3 segments with lable holder and provison for taking up cable for size not less than 35 sq.mm. with the following in flush with wall with earth connection only. ( SD 716)

Supply and Run of 4 of 10 sq.mm. (140/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable gauge MS conduit pipe on wall and ceiling with continuous earth wire connection of 14 SWG TC wire with painting of suitable colour. ( SD 409 )

Supply and fixing of 8 way vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 100A 4P MCB Isolator as incoming and 3 nos. 32A 3P MCB , 15 nos. 6A to 32A SP MCB as outgoing on suitable angle iron frame on wall with earth connection only. Lower End (SD 669)

Supply and Laying of 3 1/2 x 50 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good. ( SD 748 )

Supply and clarnping of 3 1/2 x 50 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps ( SD 224 )

Supply and frxing of brass cable gland for 3-1/2 x 50 sq.mm. PVC armoured LTUG cable with earth connection ( SD 188 )

Supply and providing cable end termination of 3-1/2 x 50 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete ( SD 237 )

Supply and fixing of 8 way Vertical Triple pole and neutral MCCB sheet steel enclosure distribution board ( with MCCB incomer) with double door (metal door) with 1 no. 250A 4P MCCB switch as incoming and 7 nos. 63A 3P MCB , 3 nos. 6A to 32A SP MCB as outgoing with suitable cable end box on suitable angle iron frame on wall with earth connection only. Higher End (Data 5)

Supply and clarnping of 3½ x 150 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps ( SD 2289 )

Supply and providing cable end termination of 3-1/2 x 150 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc., with electrical connection complete ( SD 241 )

Supply and fixing of brass cable gland for 3-1/2 x 150 sq.mm. PVC armoured LTUG cable with earth connection ( SD 192 )

Renewal by supply, erection, testing and commissioning of 1.5TR (4500 K Cal / Hr) ABS Plastic Split type Airconditioner conforming to IS : 1391 (Part 2) 1992 with Amdt. No. 1 to 2 fitted with rotary compressor operating refrigerant R - 22 / Non- CFC suitable for wall mounting for operation on 230 Volt, 50 HZ Single Phase AC supply with Star rating of 5 as per BEE specification and capable of performing the functions of 1) Cooling, 2) Dehumidifying, 3) Air circulating, 4) Filtering The installation works for the above split type AC units includes the following : 1) Mounting / Fitting indoor and outdoor units at the respective locations. 2) Laying refrigerant pipeline of required length not exceeding 4 metres distance and connecting both units after drilling hole / holes in the wall, if required. Thickness of copper tubing shall not be less than 0.7mm. 3) Insulating the suction pipe with expanded polyethylene foam 5mm tubing. 4)Laying 15mmout the condensate water being formed within indoor unit. 5) Leakage testing the entire system. 6) Charging refrigerant gas in the unit. 7)Suitable electric wiring to be provided with 2.5 sqmm PVC insulated copper wire between indoor and outdoor units upto 6 mtrs length and upto switch within 3 mtrs of location of indoor unit. (Carrier/Voltas/O General / eq make only) ( SR )

Renewal by Supply and installation of 4.0 KVA Electronic Automatic Voltage Stabilizer V Guard Make VGS 400 model with input voltage Range of 170 volt to 270 volt and output voltage range 200 volts to 240 volts with High and low voltage cut off and 3 minutes time delay relay with demonstration. ( SR )

Renewal by Supply and laying of 5/8" and 3/8" copper pipe (Extra beyond 3 metres supplied with AC unit) (M-1990)

Supply and fixing of MS stand for fixing outdoor unit (M-1991)

Supply and fixing of water drain pipe line (1” PVC Pipe) (M-2010)

Renewal by Supply and fixng of TNEB meter board suitable for 3 phase 200A service connection made up of suitable angle iron frame work of size 3 feet x 2 feet using angle iron of size 1-1/2" x 1-1/2" x 1/4" rigidly fixed on wall covered with hylem sheet of size 3 feet x 2 feet of 12mm thickness with necessary bolts and nuts supports and supply and fixing of 3 Nos. 200A fuse units (500V), 1 No. neutral link, copper earth flat of size 1" x 1/4" with inter connection of EB meter to fuse units by 19/16 PVC insulated copper wire with earth connection complete (SD 131)

Renewal by Supply and fixing of 3Nos. of 3 phase 200A aerial fuse units (500V) on suitable MS sheet covered with 6mm thick hylum sheet on suitable angle iron frame work the tapping pole with necessary clamps. ( Data 6_)

Supply and fixing of 250 A TPN switch disconnector fuse units in sheet steel enclosure with HRC fuses double break on suitable angle iron frame work with MS cable entry boxes with earth connection only. (SD 726)

Supply and fixing of 250 A Three phase 500V 4 Pole Change over Switch on suitable angle iron frame work with MS cable entry boxes with earth connection only. ( SD 740 )

Renewal bySupply and fixing of 1000W automatic electric water heater of 25 litres capacity suitable for 230V 50 c/s AC supply on suitable MS clamps with 3 core flex wire,but without plumbing work (SD 103)

Supply and fixing of Higher end Philips / Havells make or Eq single box type 4feet-20 W LED fitting with CRCA body complete with TW round blocks on wall or ceiling with 20 W LED tube with PVC unsheathed copper leads from terminals to the fitting. ( Data 7 )

Renewal by Supply and erection of 2200VA / 24Volts Puresine wave Line Interactive technology INVERTER system for lighting load purpose with 2Nos. Inverter range 12V, 150AH capacity Exide/ SF sealed maintenance free batteries for 2 to 3 hours back up time depending upon the load conditions on the predesigned angleiron frame work with

The Technical specification of the Invertor shall be as follows:- (a) Capacity : 2200VA / 24V DC / Pure Sinewave (b) Input voltage range : 170V to 270V AC, Single Phase, (c) Output voltage : 230V AC (d) Back up time : 2 to 3 Hours (e) Indicators in the Invertor : Mains ON, Invertor ON, Low Battery (f) Protection : Fuse and Inbuilt resettable circuit breaker (g) MS steel stand with wouden base for mounting the batteries and Inverters(SR)

Renewal by Earthing as per the ISI specification with an earth electrode of 2.1ml class ‘B’ GI pipe of dia not less than 40mm, with copper earth plate of size 125mm x 50mm x 6mm, with necessary funneling arrangement with necessary masonry work and with 38mm RCC cover slab for the brick masonry. (SD-233)

Supply and run of 25mm x 3mm tinned copper flat with necessary clamps / supports on wall / floor / ground for earth connection (SD 76)

Supply and run of 25mm x 6mm tinned copper flat with necessary clamps / supports on wall / floor / ground for earth connection (SD 77)

Renewal by Supply and run of 1 No. 8 SWG Hard Drawn Copper wire in suitable PVC rigid pipe concealed in wall and in Earth and making good of the concealed portion with suitable colour. ( SD 458 )

ANNAI ELECTRICALS

Ravi Electricals