Repair and maint of furniture for units under AOR of GE Partapur

Amount

Almirah large steel with shelves FD-1030

Removing unserviceable shelve and replacing with new shelve made out of 1mm thick MS sheet, shelve shall be fixed with welding including painding with two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed by Engr-in-Charge.

Removing unserviceable lock and replacing with new locks 04 lever of brass Make : Godrej/Harrison, complete all as specified and directed by Engr-in-Charge.

Removing unserviceable locking system and replacing with new locking system, 3 way locking device complete all as specified and directed by Engr-in-Charge.

Removing unserviceable handle CP and replacing with new CP handle. Complete all as specified and directed by Engr-in-Charge.

Removing unserviceable foot rest and replacing with new foot rest made out of 1mm thick MS sheet including welding and painting with two coat of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed by Engr-in-Charge.

M&L for denting and painting to almirah large with two coats of synthetic enamelled paint OG colour/smoke grey over and including one coat of red oxide primer. Make of paint : Asian/ Nerolac/ Luxol / Borolac / shalimar, complete all as specified and directed by Engr-in-Charge.

Locker Steel FD-1029

Removing unserviceable shelve and replacing with new shelve made out of 1mm thick MS sheet, shelve shall be fixed with welding including painting with two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed by Engr-in-Charge.

Removing unserviceable hasp and staple and fixing new hasp and staple CP 75mm size, complete all as specified and directed by Engr-in-Charge.

Removing unserviceable handle and fixing new 'D' shaped handle CP 100mm size best quality ISI marked, complete all as specificed and directed by Engr-in-Charge.

Removing unserviceable foot rest and repalcing with new foot rest made out of 1mm thick MS sheet including welding and painting with two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed by Engr-in-Charge.

M&L for denting and painting to locker steel with two coats synthetic enamelled paint OG colour/smoke grey over and including one coat of red oxide primer, Make of paint : Asian/Nerolac/Luxol/Borolac/Shalimar, complete all as specified and directed by Engr-in-Charge.

Table office clerk steel FD-1004

Removing of unserviceable top and fixing new top made out of 18mm thick both side prelaminated partical board (Exterior grade) teak face. PVC edging providing around. Top size 1200x610x760mm, complete all as specified and directed by Engr-in-Charge.

Repair/replacement of drawer made out of 1.0mm thick MS sheet (3 Nos for each table) along with unserviceable locks and replacing of new locks 4 lever of ISI marked for each drawer shetter and fixed with PVC handle including painting with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engr-in-Charge.

Bed hard plywood top FD-1102

Removing unserviceable long rail and fixing of long rail well seasoned teak wood all as shown on drg including polishing, complete all as specified and directed by Engr-in-Charge.

Removing unserviceable shot rail and fixing of new short rail well seasoned teak wood all as shown on drg including polishing. Complete all as specified and directed by Engr-in-Charge.

Removing unserviceable plywood and fixing of new plywood 12mm thick commercial type ISI marked of size 1980x900mm. Make : Kit ply/National/ Greenply, complete all as specified and directed by Engr-in-Charge.

Repairing head rest side including legs and polising, all as shown on drg complete all as specified and directed by Engr-in-Charge.

Replacing leg rest side including legs and polishing, all as shown on drg complete all as specified and directed by Engr-in-Charge.

Repair/replacing of stiffener, well seasoned teak wood complete all as specified and directed by Engr-in-Charge.

M&L for polishing the bed after rubbing the surface with emery paper and applying French polish of best quality of Make : Asian/Nerolac, complete all as specified and directed by Engr-in-Charge.

Chair Easy FD-1108

Removing unserviceable front leg and fixing new front leg made out of well seasoned teak wood along as shown on drg with 50mm round plastic shoe including polishing, complete all as specified and directed by Engr-in-Charge.

Removing unserviceable rear legs and fixing new rear legs made out of well seasoned teak wood as shown on drg along with 50mm round plastic shoe including polishing complete all as specified and directed by Engr-in-Charge.

Repairing seat frame, complete all as specified and directed by Engr-in-Charge.

Repairing head rest side including legs and polising, all as shown on drg complete all as specified and directed by Engr-in-Charge.

Recanning of seat and back with 2mm plastic cane of best quality in godrej pattern with 4mm thick side beading, complete all as specified and directed by Engr-in-Charge.

M&L for polishing the chair easy after rubbing the wooden surface with emery paper and applying French polish of best quality ISI marked, complete all as specified and directed by Engr-in-Charge. (Make : Asian/Nerolac)

Chair writing FD 1107

Removing unserviceable front leg and fixing new front legs made out of well seasoned teak wood as shown on drg along with 50mm round plastic shoe including polishing, complete all as specified and directed by Engr-in-Charge.

Removing unserviceable rear leg and fixing new rear legs made out of well seasoned teak wood as shown on drg along with 50mm round plastic shoe including polishing, complete all as specified and directed by Engr-in-Charge.

Repair/replacing of stiffener well seasoned teak wood, complete all as specified and directed by Engr-in-Charge.

Repair/replacing of back rest stiffiner, complete all as specified and directed by Engr-in-Charge.

S&F in repair of new arm made out of well seasoned teak wood as shown on drg, complete all as specified and directed by Engr-in-Charge.

S&F in repair of side rail as shown on drg, complete all as specified and directed by Engr-in-Charge.

Recanning of sheet with 2mm plastic cane of best quality in godrej pattern with 4mm thick side beading, complete all as specified and directed by Engr-in-Charge.

M&L for polishing the chair writing after rubbing the surface with emery paper and applying French polish of best quality complte all as specified and directed by Engr-in-Charge.

Chair dining FD 1105

Removing unserviceable front leg and fixing new front legs made out of well seasoned teak wood as shown on drg along with 50mm round plastic shoe including polishing, complete all as specified and directed by Engr-in-Charge.

Removing unserviceable rear leg and fixing new rear legs made out of well seasoned teak wood as shown on drg along with 50mm round plastic shoe including polishing, complete all as specified and directed by Engr-in-Charge.

Repair/replacing of stiffener, complete all as specified and directed by Engr-in-Charge.

Repair/replacing of back stiffener, complete all as specified and directed by Engr-in-Charge.

S&F in repair of side rail as shown on drg, complete all as specified and directed by Engr-in-Charge.

Recanning of seat chair dining with 2mm plastic cane of best quality in godrej pattern with 4mm thick side beading complete all as specified and directed by Engr-in-Charge. (Make : Shah/National)

M&L for polishing the chair dining after rubbing the surface with emery paper and applying French polish of best quality complete all as specified and directed by Engr-in-Charge.

Almirah Med steel with shelves FD-1032

Removing unserviceable shelve and replacing of new shelve made out of 1.0mm thick MS Sheet, Shelve shall be fixed with welding including painting with two coats of synthetic enmel paint over a coat of red oxide primer, complete all as specified and directed by Engr-in-Charge.

Removing unserviceable lock and replacing with new locks 04 lever of brass Make : Godrej/Harrison, complete all as specified and directed by Engr-in-Charge.

Removing unserviceable locking system and replacing with new locking system, 3 way locking device complete all as specified and directed by Engr-in-Charge.

Removing unserviceable handle CP and replacing with new handle CP, complete all as specified and directed by Engr-in-Charge.

Removing unserviceable foot rest and replacing with new foot rest made out of 1.0mm thick MS sheet including welding and painting with two coat of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed by Engr-in-Charge.

M&L for denting and painting to almirah large and medium with synthetic enamelled paint OG colour/smoke grey over and including one coat of red oxide primer. Make of paint : Asian/Nerolac/Luxol/Borolac/Shalimar, complete all as specified and directed by Engr-in-Charge.

Table writing medium FD-382

Removing of unserviceable top and fixing new top made out of 18mm thick both side prelaminated particle board exterior grade teak face of suitable size, PVC edging proving alround, complete all as specified and directed by Engr-in-Charge.

Charpoy GI pipe FD-220/1122

Removing of unserviceabl 3 way elbow GI 32mm dia pipe from existing GI pipe charpoy and replacing with new elbow, three way GI medium grade ISI marked for 32mm bore GI pipe as shown in drg, complete all as specified and directed by Engr-in-Charge.

Removing unserviceable long rail and supply and fixing new long rail made out of 32mm bore GI pipe medium grade ISI maeked as shown in drg, complete all as specified and directed by Engr-in-Charge.

Removing unserviceable short rail and fixing new short rail made out of 32mm bore GI pipe extracted from long rail as obtanined from serial item No. 10.02 above including necessary cutting and threading as shown in drg, complete all as specified and directed by Engr-in-Charge.

Removing unserviceable leg and fixing of new legs made out of 32mm bore GI pipe medium grade extracted from short rail as obtained from serial No. 10.03 above including necessary cutting and threading and provide to wooden gudka for shoe purpose fitted with legs 25mm screw as shown on drawing, complete all as specified and directed by Engr-in-Charge.

Removing unserviceable plywood from GI Charpoy and tighting the frame and S&F of new playwood commercial 12mm thick of size 1980x900mm commercial type ISI marked of best quality (Make : National/Century/ Green Ply) best quality with 10 Nos 65mm nut & bolt fixed to the frame incl welding two Nos stiffener made out of flat iron 40mm x6mm thick including drilling holes etc, complete all as specified and directed by Engr-in-Charge.

Removing unserviceable checknuts of 32mm dia and supply & fixing new checknut medium grade ISI marked as shown in drawing, complete all as specified and directed by Engr-in-Charge.

Chair tubler steel with Arms(a) Removing unserviceable seat & back and refix new seat & back including M&L denting and painting to steel frame of chair tubler steel with arms.

Charpoy double bunk GI/steel (a) Removing unserviceable plywood from chapoy double bunk steel and tightening the frame and S&F of new ply wood commercial 12mm thick of size 1980x900mm commercial type ISI marked quality (Make : National/Century/ Green Ply) best quality with 10 Nos 65mm Nut & bolt to the frame and including welding two Nos stiffener made of Flat iron 40mm x 6mm including drilling holes etc. (2 Nos plywood for each charpoy) complete all as specified and directed by Engr-in-Charge.

Teapoy wooden FD-278

Removing unserviceable leg and fixing new legs made out of well seasoned teak wood as shown on drg along with 50mm round plastic shoe including polishing, complete all as specified and directed by Engr-in-Charge.

Removing of unserviceable top and fixing new top made out of 18mm thick both side pre-laminated particle board exterior grade teak face. PVC edging providing alround, complete all as specified and directed by Engr-in-Charge.

Repair/replacing of stiffener, complete all as specified and directed by Engr-in-Charge.

Repair/replacing of new frame as shown on drg, complete all as specified and directed by Engr-in-Charge.

M&L for polishing the teapoy after rubbing the surface with emery paper and applying French polish of best quality, complete all as specified and directed by Engr-in-Charge.

Table Dining 8 Pers FD-1115

Removing unserviceable leg and fixing new legs made out of well seasoned teak wood as shown on drg along with 50mm round plastic shoes incl polishing complete all as specified and directed by Engr-in-Charge.

Removing of unserviceable top and fixing new top made out of 18mm thick both side pre laminated particle board exterior grade teak face. PVC edging proving alround alongwith of size 1200x610x76mm, complete all as specified and directed by Engr-in-Charge.

Repair/replacing of stiffeners, complete all as specified and directed by Engr-in-Charge.

Sofa Chair Single Seater FD-281

Removing unserviceable seat and back from sofa chair single seater and S&F new seat and back to sofa single chair cushion shall be sleepwell/Kurnal which shall be approved by Engr-in-Charge. Size of seat & back shall be 550x530x100mm having 32mm density duly covered with superior quality of tapestry price range of tapestry cloth is not than Rs. 250 per mtr, complete all as specified and directed by Engr-in-Charge.

Deduct Schedule of Credit of Rs (-) 26114.00 (Minus) as listed in Schedule 'A' Part-II. Contract Sum shall be arrived after deducting the credit amount. Note :- Tenderers will not quote against this item being a firm amount.

MS INFRATECH

EESSI