Repair to boundary Wall, Drain, Road Side Footpath and Interlocking Tiles in RA at CAD Pulgaon

Amount

M&L of machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade including 50 mm sand cushioning with grey cement and pigment including demoltion of existing and disposal of rubbish complete all as specified and as directed.

M&L for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation filling mass concrete and sub base including demolition of cement concrete in ground floors and pavings and disposal of rubbish complete all as specified and as directed.

M&L in repairs for hardcore of broken stone or boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

M&L for 75mm PCC 1:3:6 type C1 (using 20mm graded stone aggregate) as in plinth protection/ path/hardstanding even and smooth without using extra cement including demoltion of existing damaged PCC and disposal of rubbish complete all as specified and as directed.

M&L for 100mm thick PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in path/paving/hard standing and finishing the surfaces even and smooth without using extra cement including demoltion of existing damaged PCC and disposal of rubbish complete all as specified and as directed.

M&L for coloured, textured finish/ non skid ceramic tiles of th (8-10 mm), area of each tile n exc 0.36sqm, laid in floors/path/ hardstanding/wall etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15mm thick screed bed in CM 1:4 including dismantling of existing floor/wall tiling with cement mortar bedding (but not backing) and removing the rubbish off the premishes complete all as specified and as directed.

M&L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick, laid in floors/path/ hardstanding/wall etc set and jointed in neat cement slurry with a mixture of white and grey cement with no pigments and incl 15mm thick screed bed in CM 1:4 including dismantling of existing floor/wall tiling with cement mortar bedding (but not backing) and removing the rubbish off the premishes complete all as specified and as directed.

M&L for PCC(1:2:4) type B-1 (using 20mm graded stone aggregate) as in surface channel in drains including demolition of cement concrete (un reinforced) of any description and in any position complete all as specified and as directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc

Add or deduct for each 25 mm girth or part thereof over or under 30cm

M&L in repairs Reinforced concrete pipes, 450mm inner dia class NP3, laid and jointed complete with collars complete all as specified and as directed.

M&L for Brick work with fly ash bricks straight or curved on plan exc 6m in radius but built in 1:6 cement mortar including demoltion of brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc complete all as specified and as directed.

M&L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted built in CM 1 : 6 of old stones obtained from demoltion of stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc complete all as specified and as directed.

M&L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in CM 1 : 6 including demoltion of brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc complete all as specified and as directed.

M&L for Raised pointing to random or polygonal rubble, un coursed or brought upto courses CM 1:4 complete all as specified and as directed.

Taking down cement plaster of any description on brick/ Stone Walls or from Concrete Surfaces incl raking out joints, hacking for key, scrubbing down with water etc all as specified and removing unserviceable material outside premises complete all as specified and as directed.

M&L for 15mm thick rendering in two coats on stone/ brick/ concrete surfaces (external) finished even and smooth without using extra cement etc. 1st coat 10 mm thick in CM 1:6 and 2nd coat 5mm thick in CM 1:4 mix with water proofing compound as per manufacturer instructions complete all as specified and as directed. Note : WPC shall measured and paid Seprately

Supply only Integral water proofing Compound

M&L in repairs for PCC 1:2:4 type B1 (using 20 mm graded stone aggregates) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directe incuding necessary formwork required complete all as specified and as directed.

M&L for preparation of new or old plastered/unplastered surfaces of wall and applying two coats of cement base paint over a coat of white cement primer complete all as specified and as directed.

M&L for preparation of new or old plastered/unplastered surfaces of wall and applying three coats of whitewash complete all as specified and as directed.

M&L for precast cement concrete jallies in PCC (1:2:4) type B0 (12.5 graded agg), 35 mm thick (measured solid) set in CM 1:6 including all moulding etc complete all as specified and as directed.

M&L for RCC nominal mix type B1 1:2:4 (20mm graded aggregate) as in Columns, Slabs, Soffits, Beams, Chajjas,Arches including demolition of existing RCC and removing the rubbish off the premises complete all as specified and as directed.

M&L for Formwork to flat surfaces to sides of concrete for Columns, Slabs, Soffits, Beams, Chajjas, Arches with fair finish of concrete complete all as specified and as directed.

M&L mild steel TMT bars 10 mm dia and over cut to length, bend to shape required, incl cranking bending spirally for hooking for column, hooking ends and binding with 0.9 mm dia annealed wire confirming to ISI complete all as specified and as directed.

M&L mild steel 6 to 8mm mm dia TMT bars as in stirrups, spacers and binders, bend to shape required, incl cranking bending spirally for hooking for column, hooking ends and binding with 0.9 mm dia annealed wire confirming to IS complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for fencing post complete all as specified and as directed.

M&L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified.

M&L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 for portions framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc.complete all as specified.

S&F in repairs stainless steel (Grade 304) railing/frame made of hollow tubes including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the frame with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, with suitable arrangement.

S&F in repairs Aluminium Composite Sign Board (3-4mm thick) , retro reflective tape on both side of colour approved by Engr-in-Charge as on back ground complete all as specified and directed .

S&F retro reflective tape/strip for Writing letters, figures or symbols (Block,Roman, Italic or Indian) n exc. 20 cm high and n exc15cm wide of colour approved by Engr-in-Charge complete all as specified and directed.

I P Constructions

SHREE CONSTRUCTIONS

MAHARASHTRA ENTERPRISES

M/s MM TRADERS

SHREE SIDDHIVINAYAK TRADERS

Bidder Name

M/S L M Chourasia

SHREE CONSTRUCTIONS

SHREE SIDDHIVINAYAK TRADERS

MAHARASHTRA ENTERPRISES

M/s MM TRADERS

I P Constructions