CONSTRUCTION OF PINK TOILET FOR GIRLS AT GOVT PRIMARY SCHOOL IN CHIKKOPPA VILLAGE OF GADAG TALUK. (RESERVE FOR ST)

CONSTRUCTION OF PINK TOILET FOR GIRLS AT GOVT PRIMARY SCHOOL IN CHIKKOPPA VILLAGE OF GADAG TALUK. (RESERVE FOR ST)

Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per dr...

Providing Coursed rubble masonry (first sort) with hard stone in foundation and plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) (PWD SR 2023-24 Vol-2 ,P.No.9, I.No.5.2)

Filling in foundations with granite/ trap broken metal 100mm. and down size, with approved sand Including hand packing, ramming watering. Including cost of all materials and labour with lead upto 50m....

Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to mee...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) inc...

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removi...

Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, in...

Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, lai...

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle gre...

Flooring with 25mm thick polished tandur blue stone slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mix...

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a primi...

Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle...

Providing & fixing 30mm thick factory made rigid foam Panelled Door Shutters made from M.S. tube of 19 gauge thickness, size 19x19mm for stiles and 15x15mm for top & bottom rails, covered with heat mo...

Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long bracket...

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer to give an even shade after thoroughly brooming the surface to remov...

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after th...

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complet...

Providing and fixing white vitreous china squatting plate urinal with integral rim longitudinal flush pipe.(PWD SR 2023-24,Vol-2,P.No.135, I.NO.14.24 )

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and ...

PVC pipes 75mm dia., 6 kg/sqcm & clas,Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line ...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe wi...

Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uP...

Providing and fixing white vitreous china water closet squatting pan (Indian type),Long pattern W.C. pan of size 580 mm : (PWD SR 2023-24,Vol-2,P.No.134, I.NO.14.31.1 )

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. ...

Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps(PWD SR 2023-24,Vol-2,P.No.132, I.NO.14.7.1 )

Supply and delivery at site Accessories for Single Phase pumpset like SS Groove Nipples,SS Studs & Nuts,Screw Clips &water proof Insulation Tape etc complete with ISI mark (PWD SR 2023-24,Vol-5,P.No.1...

Providing and fixing Brass bib-cock 15 mm dia (PWD SR 2023-24,Vol-2,P.No.A-14, I.NO.86 )

Rectangular cover 600X850 mm with frame (low duty). (PWD SR 23-24 Page No.A-33, I No. 709, Vol-2 )

CONSTRUCTION OF PINK TOILET FOR GIRLS AT GOVT PRIMARY SCHOOL IN CHIKKOPPA VILLAGE OF GADAG TALUK. (RESERVE FOR ST)

Supplying and flush mounting powder coated metal box suitable for mounding modular switch plates. The box should be firmly flush mounted after due groove cutting in brick / stone / cc wall-1 - 3Way

Concealed Conduit System-Supplying heavy gauge PVC conduit pipe . mm dia .mm thick with suitable size bends / metal / PVC junction boxes adhesive paste etc.and running before concreting the slab. The ...

Groove Cutting in Wall -Supplying heavy gauge PVC conduit pipe . mm dia .mm thick with bends metal junction boxes adhesives paste etc and bracing U or J hooks and cement plastering upto the surface of...

Supplying and fixing PVC/metal conduit deep junction box .19/20mm deep junction box

Supplying and fixing PVC/metal conduit deep junction box 25mm deep junction box

WIRING FOR Lighting/Power Circuits-FRLS PVC insulated 1100V grade, multistrand copper with low conductor resistance single core wire in open or concealed wiring system with specified IS -694:1990 & co...

WIRING FOR Lighting/Power Circuits-FRLS PVC insulated 1100V grade, multistrand copper with low conductor resistance single core wire in open or concealed wiring system with specified IS -694:1990 & co...

Supplying and fixing 6 to 32 Amps SP miniature circuit breaker 10 Ka, with C curve, on the existing MCB distribution board using necessary fixing materials and wiring complete as required

Supplying and fixing 40A DP MCB miniature circuit breaker 10 Ka,with C curve,on the existing MCB distribution board using necessary fixing materials and wiring complete as required

Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes.-1.5 sq.mm

Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes.-2.5 sq.mm

Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes.-4.00 sq.mm

Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes.-6.00 sq.mm

Supplying and fixing of Class A (medium duty) GI Pipe of wall thickness not less than 3.25mm on pole/wall/drain crossing with necessary clamping arrangements for UG cable of 1.1KV class.-40mm

EARTHING-Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc using 40mm dia 2.9mm thick 2.5 mtr long GI pipe with GI funnel with mesh and suitable size reduce...

Supplying and running of GI Strip of size 25 x 3mm for grounding connections using necessary fixing materials as required

Fixing all types and all capacities fluorescent / false ceiling /spot light / CFL / LED fitting indoors on the wall / ceiling /

Fixing of Wall/ ceiling fan of all capacities and all types to the existing hook together with supplying and fixing a 5 A ceiling rose , necessary length of 23/0.0076 inch PVC insulated twin twisted c...

Fixing halogen/metal hallide/SVL / IL / LED flood light fitting over existing pole/wall ceiling including clamps,bolts, nuts and wiring using suitable capacity wires complete.

Supplying and wiring adopting loop system in existing PVC Conduit casing capping casing capping using 2x1.5Sqmm Phase & Neutral & 1x1.0 sqmm Earth wire FRLS multi strand PVC insulated copper wire conf...

do.Medium point above 3 mts upto 6mts from tapping point to outlet via switch box

do. Long point above 6 mts upto 10 mts from tapping point to outlet via switch box

Supplying of .feet PVC Batten with integrated LED tube W with high quality diffuser with Life of 25000 burning hours 70 lumen maintenance with CRI 80 Power Input: 220-240V 50/60Hz Power factor 0.9 alo...