Certain B and R Repair in Lift Room, DG Set, Incenator and Boiler Room and Installations Under GE Utilities Udhampur

Amount

Demolition of brick work or stone/boulder masonary built in cement mortar including all quoins, arches, pillars but excluding ashlar facing dressed stone and removing the rubbish out side MD land complete all as specified and directed by Engr-in-Charge.

M&L brick work with sub class 'B' bricks straight or curved on plan exc 6 mtr mean radius built in cemetn mortar 1:6 complete all as specified and directed by Engr-in-Charge.

Material and labour for brick work built in CM (1:6) straight or curved on plan exceeding 6 metre mean radius using sub class ‘B’ bricks (Old size bricks) but except bricks complete all as specified and directed by Engr-in-Charge.

M&L brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick wall built in cement mortar 1:4 complete all as specified and directed by Engr-in-Charge.

M&L walling of random rubble masonary uncoursed well bonded bedded and solidly hearted built in CM 1:4 at back side as work proceed complete all as specified and directed by Engr-in-Charge.

Description all as per serial item No 11 here-in-before but except stone complete all as specified and directed by Engr-in-Charge.

M&L for flush pointing to stone masonary wall in cement mortar 1:3 complete all as specified and directed by Engr-in-Charge.

M&L for precast cement concrete 1:3:6 type C-1 using 20 mm graded stone aggregate as in bonders for stone walling set in CM 1:4 complete all as specified and directed by Engr-in-Charge.

M&L for PCC 1:2:4 Type B1 (20mm graded crushed stone aggregate) as in coping, steps, seismic and other similar bands, plinth courses, kneelers, apex stones, bed plate, kerbs and the like including weathering, slightly rounded or chamfered angles and throating, as directed.

Dismantling post or struts (wood, steel or RCC) any position, including taking out embeded portion,concrete, brick work, masonary etc and making good disturbed ground complete all as specified and directed by Engr-in-Charge.

Dismantling fencing wire, chain link, mesh fencing or any type and any position etc complete all as specified and directed by Engr-in-Charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed by Engr-in-Charge.

Dismantling barbed wire of any description complete all as specified and directed by Engr-in-Charge.

Taking down concetina coil 600mm dia laid over Y shape angle irom complete all as directed by Engr-in-Charge.

M&L for hand rails, half rounded or other stock section or core for wooden hand rail straight portion, drilled and countersunk for balusters running bars, for door,balusters, noising to steps including embedding in concrete and screweing etc wind ties including securing bolts post and struts in fencing drilling holes,notching for wire etc flat iron fillets including necessary drilling, bolting and reveting etc or similar works complete all as specified and directed by Engr-in-Charge.

M&L for Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc complete all as specified and directed by Engr-in-Charge. (Each line wire to be measured).

M & L concetina coil 600mm dia laying on the Y shape angle iron post and binding the each coil with wire complete all as specifed.

M & L Flat Iron for band strap support of stay, wall tie, hold fast or similar works etc complete.

M&L Mild Steel round bars Fe-410-W (Gde E-250) quality-A or Fe 290 (Gde E-165) for securing chain link fencing complete all as specified and directed by Engr-in-Charge.

M&L for PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete etc complete all as specified and directed by Engr-in-Charge.

M&L for Mild Steel nuts and bolts of size 12mm dia bolt exc 5cm but not exc 10cm long etc and dia of neck 10mm complete all as specified and directed by Engr-in-Charge.

S&F chain link fencing 4mm dia bar and mesh size 100x100mm complete including line wires of any mesh size and to any type of standards rails,straining bolts etc including provisioning of binding wire complete all as specified and directed by Engr-in-Charge.

S & F M S chequered plate for duct cover cut square/rectangular or notched (ordinary of counter sunk) forming holes without any attachment of Fe-410-W Gde-250 complete all as specifed and directed.

S & F steel work in roof trusses (framed), truss, purlins, crane gantries, rails and fastening and heavy bracket framing (Beam, tee, agnle channel or flat sections including distance pieces, cleats etc. confirming to Fe -410 grade-250 B complete all as specified and directed by Engr-in-Charge.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering complete all as specified and directed by Engr-in-Charge.

M & L for Galvanised, corrugated mild steel sheeting 0.80mm thickness with two corrugations side lap, fixed with L-type or J-type or cranked hook bolts in lieu of screws and washer in roofs, walls etc. With grade of zinc coating 275 complete all as specified and directed by Engr-in-Charge.

M & L for Plain galvanised, mild steel sheeting 0.80mm thickness, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed by Engr-in-Charge.

S&F expanded metal exc 4.00 Kg per sqm cut to length, bent to shape and welded with MS angle iron frame complete all as specified and directed by Engr-in-Charge.

S&F framed MS work as in grills, gratings, etc. with ends of bars shouldered and/or riveted, similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed by Engr-in-Charge.

Dismantling Asbestos cement corrugated, semicorrugated, sheets in roof coverings complete all as specified and directed by Engr-in-Charge.

M&L 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls, etc. Fixed with L-type or J-type or cranked hook bolts complete all as specified and directed by Engr-in-Charge.

Except sheet 6mm thick asbestos cement corrugated or semi corrugated sheets in roofs, walls etc fixed with L-type or J-type of cranked hook bolts complete all as specified and directed by Engr-in-Charge.

M&L Asbestos cement one piece plain angular ridge 6mm thick Fixed with L-type or J-type or cranked hook bolts complete all as specified and directed by Engr-in-Charge.

M&L prepainted galvalume aluminium zink coating GI based corrugated steel sheet 0.5mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge.

M&L prepainted galvalume aluminium zink coating GI based plain steel sheet 0.5mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge.

Taking down cement plaster on brick or concrete surface etc including raking out joints hacking for key and scrubbing with water etc complete all as specified and directed by Engr-in-Charge.

M & L rendeing 15mm thick cement plaster on fair faces of brick or concrete surface in CM 1:6 and and finishing the surface even and fair complete all as specified and directed by Engr-in-Charge.

M&L for applying three coats of white wash on new wall surface including preparation of surface complete all as specified and directed by Engr-in-Charge.

M&L rendeing 15mm thick cement plaster on fair faces of brick or concrete surface in CM 1:4 and and finishing the surface even and fair complete all as specified and directed by Engr-in-Charge.

M&L for applying two coats of cement base paint, white or tinted over a coat of primer on new wall surface including preparation of surface complete all as specified and directed by Engr-in-Charge.

M&L for applying one coat of cement base paint, white or tinted on old wall surface including preparation of surface complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new plastered surfaces of wall and applying two coats of exterior weather proof paint over a one coat of primer complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old plastered surfaces of wall and applying one coats of exterior weather proof paint over a one coat of primer complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old plastered or unplastered surface and apply one coat of white wash on ceiling surface etc complete all as specified and directed by Engr-in-Charge.

Complete removal of existing treatment on old decorated wall/vertical surfaces by means of washing/rubbing/scurbbing down to receive the primer and applying two coats of distemper oil emulsion white or tinted (as apprved) over a coat of primer of alkali resistant paint including preparation of surface complete all as specified and directed by Engr-in-Charge.

M&L for applying one coat of white wash on old wall surface including preparation of surface complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old painted wooden surface of any description over 10 cm width or girth not otherwise described for and apply one coats of synthetic enamel paint etc complete all as specified and directed by Engr-in-Charge.

Taking down chowkhat with shutter not exc 1.5 Sqm each with shutter,without taking down shutters from the chowkhat etc complete all as specified and directed by Engr-in-Charge.

Taking down chowkhat with shutter exc 1.5 Sqm but not exceeding 4 sqm each with shutter,without taking down shutters from the chowkhat etc complete all as specified and directed by Engr-in-Charge.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered, with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed by Engr-in-Charge.

S&F Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specifications and drawings complete all as specified and directed by Engr-in-Charge.

S&F Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etcsize 105 x 60mm complete all as specified and directed by Engr-in-Charge.

S&F factory made plain framed, panelled shutter 35mm thick (two panel) with lock rail & panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. 2nd Class HW rail & style of size as per IS: 1003 (Part I), kiln seasoned & chemically pressure treated complete all as specified and directed by Engr-in-Charge.

S& F aluminium Butt hinges 100 mm size with extruded aluminium alloy with galvanized mild steel hinge pin anodized and fixed type B-21 complete all as specified and directed by Engr-in-Charge.

S&F Aluminium, anodised, barrel tower bolts 150mm long of extruded section complete all as specified and directed by Engr-in-Charge.

S&F Aluminium alloy, anodised, sliding door bolt 300mm long with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed by Engr-in-Charge.

S&F Aluminium handles 150mm size, cast type, anodised complete all as specified and directed by Engr-in-Charge.

S&F steel window made up of box steel section of 16 gauge ms sheet of outer frame, shutter frame and centre frame with outer side glazed shutter and inner side wire mesh shutter fixed as shown in drg consisting with two nos pintol hinges 100mm long, two nos stove enemaled tower bolts 150mm long, and one no steel handle, dovetailed or welded each panelan complete with necessary cleats and stopers complete all as specified and directed by Engr-in-Charge.

S&F steel ventilator made up of box steel section of 16 gauge ms sheet frame fixed type and partly glazed, partly gauged complete all as specified and directed by Engr-in-Charge. (MS gaurd bar/grill work will be measured and paid separately)

M&L for anodized aluminium sliding window with frame of section 100mm x 45mm , thickness of sheet 16 gauge , including sliding shutter with shutter of section 32mm x 15mm (with and including Triple Track and 2 Nos Glazed Shutter and 01 No Gauzed Shutter) including Stainless Steel wire mesh, rubber gasket for securing the glass, 4 mm thick Tinted glass and necessary Aluminium moongreies and handles complete all as specified and as directed by Engineer-in-charge.

M&L for anodized aluminium door frame with shutter of section 100mmx 45mm, thickness of sheet 16 gauge , patly panelled shutter and partly glazed lock rail / bottom rail of shutter 100mm x 45mm, top rail 80mm x 45mm including necessary jointing cleats, anodized aluminium including necessary fittings and aluminium mongeries i.e. 150 mm long two Nos aluminium handles, 02 No, 200mm long aluminium tower bolt in each leaf, rubber gasket for securing the glass and 3 Nos 100 mm long butt hinges with each including 5 mm thick tinted glass and 12 mm thick Prelaminated Particle Board including mortice lock, hydraulic door closure complete all as specified and as directed by Engineer-in-charge.

S&F plain sheet glass 4.00 mm thick ordinary quality n.exc 0.5 sqm in each pane and glazing with oil putty or fixed with beads complete all as specified and directed by Engr-in-Charge.

S&F galvanished MS wire cloth 0.56 mm nominal dia wire and avg width of aperture 1.18 mm with tinned tacks or galvanished wire staple complete all as specified and directed by Engr-in-Charge.

S&F Chimney bars (straight or camber); bearing bars; ton-gues or water bars for window frames; window guard bars, plain let in & fixed independently in wooden frames L or T section support for shelves etc & similar articles conforming to Fe 290-0 Gde E-165 complete all as specified and directed by Engr-in-Charge.

M&L for applying two coats of synthetic enamel paint on steel surfaces over a coat of red oxide of any description, not otherwise, described, over 10cm width or girth including preparation of new surface complete all as specified and directed by Engr-in-Charge.

M&L for applying one coat of synthetic enamel paint on old steel surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of surface complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new steel surfaces of any description not otherwise described not exc 10 cm width and girth applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed by Engr-in-Charge.

M&L for applying one coat of aluminium paint on old steel surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of surface complete all as specified and directed by Engr-in-Charge.

S&F figured glass pin hard type 3.0 mm thick & glazing with oil putty in square n exc 0.5 sq.m in each pane including hacking out old broken glass (any thicknesss, size,quality or description) from metal frame inlcuding punching or drilling out old glazing pins/spring clips & providing & fixing new ones complete all as specified and directed by Engr-in-Charge.

S&F Sheet glass 4.0mm thick, ordinary quality & glazing with oil putty in square n exc 0.5 sq.m in each pane including hacking out old broken glass (any thicknesss, size,quality or description) from metal frame inlcuding punching or drilling out old glazing pins/spring clips & providing & fixing new ones complete all as specified and directed by Engr-in-Charge.

Taking down PVC (SWR) pipe 110 mm dia fixed in any position complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) bends any radius 110mm dia complete all as specified and directed by Engr-in-Charge.

Demolition of stone slabs & tiles including cement mortar beddig(but not backing) of any description or thickness in floors, aprons, etc, laid, bedded and pointed in any mortar complete all as specified and as directed by Engr-in-Charge.

M & L for Machine cut kota stone slab flooring 18-20mm thick over 15mm thick screed bed in CM (1:4) laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, polishing, granite cutting and mirror polish finish complete all as specified and as directed by Engr-in-Charge.

M & L for kota stone slab flooring 18-20mm thick in riser of steps, skirting, dado & pillar over 10mm thick plaster in CM (1:3) jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, polishing, granite cutting and mirror polish finish complete all as specified and as directed by Engr-in-Charge.

Dismantling floor , hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr-in-Charge.

M&L for coloured Non Skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.11Sqm but not exceeding 0.18 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over including screed bed or bedding layer of mortar (1:4) 15 mm thick complete all as specified and directed by Engr-in-Charge.

M&L for coloured Non Skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.11Sqm but not exceeding 0.18 Sqm in vertical surfaces such as skirting/dado and riser to steps etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over including 10mm thick rendering of mortar (1:3) complete all as specified and directed by Engr-in-Charge.

M&L for coloured glazed ceramic tiles in vertical surface 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including rendering 10 mm thick CM 1:3 complete all as specified and directed by Engr-in-Charge.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc complete all as specified and directed by Engr-in-Charge.

M&L for Brushing neat cement slurry with 3.0 kg of cement per sqm complete all as specified and directed by Engr-in-Charge.

M&L for 10mm thick cement plaster in cement mortar 1:4, including finishing even and smooth with out using extra cement mixed with water proofing compound when concrete is green,as per manufacturere instructions complete all as specified and directed by Engr-in-Charge. Note: Water proofing compound shall be measured and paid separately.

Supply only integral water proofing compound, ISI marked complete all as specified and directed by Engr-in-Charge.

M&L for APP based polymeric membrane of minimum 3 mm thick and minimum weight not less than 3.0 Kg/sqm, reinforced with polyster non woven fabric matt (weight not less than 150 gm/sqm), laid with forced application over roof surface with a coat of hot blown bitumen conforming to IS-3384-1965 of grade 85/25 @ 1.2 kg/Sqm at bottom of the membrane as bonding material, and a coat of bituminous primer on top complete all as per manufacturer's instructions complete all as specified and directed by Engr-in-Charge.

Repair to existing steel rolling shutters without ball bearing by taking down top cover, anchoring rod, spring etc and providing new springs and anchoring rod, replacing the worn out strips, safety lever lock of shutters and welding of handle, hasp staples and other broken articles etc, greasing the spring, guide rail, shaft etc and making functional and errecting in position, including refixing of top cover/hood etc, and refixing in same opening and making good in CM 1:3 /PCC to match the existing surface, opening n.exc 10 sqm each and finally painting with two coats of synthetic enamel paint complete all as specified and directed by Engr-in-Charge.

Taking up or down 15 mm bore GI tubing , fittings and connection and removing from site complete all as specified and directed by Engr-in-Charge.

Taking up or down 20 mm bore GI tubing , fittings and connection and removing from site complete all as specified and directed by Engr-in-Charge.

S&F 15 mm dia GI tubing medium grade inlcuding necessary fittings such as elbow tees cap plugs short pieces unions etc fixed to walls, floors, ceiling complete all as specified and directed by Engr-in-Charge.

S&F 20mm dia GI tubing medium grade inlcuding necessary fittings such as elbow tees cap plugs short pieces unions etc fixed to walls, floors, ceiling complete all as specified and directed by Engr-in-Charge.

S&F in repairs Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe & waste pipe) complete all as specified and directed by Engr-in-Charge.

Supply only flush pipe of polyethylene of low or high density of PVC, 32 mm dia, for low level cistern/urinal complete all as specified and directed by Engr-in-Charge.

S&F in repair waste pipe PVC 32mm bore 750mm for wash hand basin fixed in repairs complete all as specified and directed by Engr-in-Charge.

S&F in repairs 15 mm bore CP brass bib tap fancy type with crutch or butterfly handle screwed down screwed for iron pipes or brass ferrule complete all as specified and directed by Engr-in-Charge.

S&F in repairs 15 mm bore pillar taps , cast copper alloy fancy type with capstan heads chromium plated ,screwed down high pressure with or without lettered hot or cold with long screwed shanks and flynuts screwed for iron pipe complete all as specified and directed by Engr-in-Charge. (fancy type).

S&F in repairs 15 mm bore stop valve/angle valve, cast copper alloy with capstan heads chromium plated ,screwed down high pressure with or without lettered hot or cold with long screwed shanks and flynuts screwed for iron pipe complete all as specified and directed by Engr-in-Charge. (fancy type)

S&F in repair PVC valve less syphmic action type flushing cistern low level,10 ltr capacity white or coloured with inlet, ball valve, float &handle incl brackets & PVC flush pipe 32 mm bore complete all as specified and directed by Engr-in-Charge.

S&F in repairs vitreous china WHB white flat back size 550 x 400 mm including brackets, 32 mm dia waste fittings brass CP for WHB & CP pillar tap etc with long shank screwed and fly nuts , flags and bedded in red lead cement and outer end fixed complete all as specified and directed by Engr-in-Charge.

S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed by Engr-in-Charge.

S&F in repais PVC tank covers suitable for tanks 500 & 1000 litres tanks including fixing locking brackets/threaded complete all as specified and directed by Engr-in-Charge.

S&F in repair 125 mm dia CP grating with or wirhout hole over nahani/floor trap including embedding the same in white/coloured cement to match complete all as specified and directed by Engr-in-Charge.

M&L uprooting of plants (girth n.exc 15 cm of trunk to any type of plants 100 ml grown along the pipes or walls chajjas, parapets and roof of building (incl multistoried) and making good the surface as per existing surface and pouring acid not less than 100 ml for each plant in the roof to avoid further growth complete all as specified and directed by Engr-in-Charge.

Dismantling water tanks exc 250 ltr and n. exc 500 ltr and removal from site complete all as specified and directed by Engr-in-Charge.

S&F 500 litres capacity Rotational moulded polyethylene water storage triple layer tanks (Cylindrical vertical with closed top) hoisted & fixed in position including Tank Nipple, 20 mm bore ball brass valve and with union (Two Nos each), fittings complete all as specified and directed by Engr-in-Charge. Make of tank:- Sintex/Rotex/Polywell

Dismantling water tanks exc 500 ltr and n. exc 1000 ltr and removal from site complete all as specified and directed by Engr-in-Charge.

S&F 1000 litres capacity Rotational moulded polyethylene water storage triple layer tanks (Cylindrical vertical with closed top) hoisted & fixed in position including Tank Nipple, 20 mm bore ball brass valve complete with union (Two Nos each), fittings complete all as specified and directed by Engr-in-Charge. Make of tank:- Sintex/Rotex/Polywell

Dismantling framed work timber scantling fillets under 40 sqcm in section in any position complete all as specified and directed by Engr-in-Charge.

Dismantling wall and ceiling boards any thickness including cover fillets etc complete all as specified and directed by Engr-in-Charge.

M&L for mild steel work L or T or flat iron sections supports for shelves and for ceiling sheets etc and similar articles confirming to Fe-290 Gde E-165 complete all as specified and directed by Engr-in-Charge.

S&F 4mm thick Non asbestos fibre cement building boards fixed in GI frame work as in ceiling, flat or sloppy as per manufacturer's instrucitons complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new ceiling surfaces and applying three coats of white wash complete all as specified and directed by Engr-in-Charge.

Taking down steel rolling shutters manually operated type with ball bearing cover hood and channel, anchoring rod etc of size upto 25 sqm each complete all as specified and directed by Engr-in-Charge.

M&L for Steel rolling shutters 1.25mm thick without ball bearing, as specified including top cover, anchoring rod, hasp & staple & one shop coat of primer; erected in position as indicated, complete push pull or manual type complete all as specified and directed.

S&F safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed by Engr-in-Charge.

S&F Ball bearing for rolling shutters as per existing complete all as specified and directed by Engr-in-Charge.

Demolition of PCC in ground floors & pavings n exc 15 cm thickness below or above ground level,unreinforced and removing the rubbish out side MD land complete all as specified and directed by Engr-in-Charge.

M & L for Machine pressed precast concrete interlocking pavor block 50% grey and 50% coloured any shape and size confirming to IS 15658-2006 of 60mm thicknes, M-35 over and including 75mm thick PCC Type D-2, (1:4:8) and 25mm thick sand cushion complete all as specified and directed by Engr-in-Charge.

M&L for providing 75mm thick PCC 1:3:6 type C2 using 40mm graded crushed stone aggregates as in sub pavement complete all as specified and directed by Engr-in-Charge.

M&L colured Chequered cement concrete tiles 25 cm x 25 cm x 22 mm thick, set, jointed and pointed in neat cement slurry (with grey cement and pigment) as in floors over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed by Engr-in-Charge.

M & L for 50mm thick PCC 1:3:6 type C-1 (20mm graded crushed stone aggregate) and plinth protection finished even and smooth with using extra cement complete all as specified and directed.

M&L for 100mm thick PCC 1:2:4 type B-1 (20mm graded cruched stone aggregate) for floor finished even and smooth with using extra cement complete all as specified and directed by Engr-in-Charge.

M&L for glass deviding strips 3mm thick and width of strip 38mm complete all as specified and directed by Engr-in-Charge.

Taking down linoleum sheet and cleaning the surface complete all as specified and directed by Engr-in-Charge.

M & L for 3.20/3.30mm thick linoleum sheet plain coloured laid in floors and sealed down with an approved adhesive including sretching, cutting and fitting compete all as specified and directed.

M & L for loose filling with aggregates of gauge 40mm to 80mm complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed by Engr-in-Charge.

M&L for prelaminated particle board 18/19mm thick , exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screw to timber frame work complete all as specified and directed by Engr-in-Charge.

M&L for 2nd Class hard wood for plain fillets area not exc 3 sqcm square, rectangular in section clean sawn secured with nails or brads complete all as specified and directed by Engr-in-Charge.

Cutting/cleaning of small plants, bushes, wild vegetation growth and removal of rubbish and other materials upto a distance exc 50mtr but n

RAMAN CONSTRUCTION CO

Alishan Builders

pargal builders

khajuria builders