Work for Interior Wooden work including Wall Panelling, Storage Units and Other Allied Components in the Court Rooms and Chambers in New Judicial Complex Tower of Justice at Gurugram (RECALL)

Amount

Providing and fixing 100mm thick partition made with HDHMR board 16.75mm bothside on the wooden frame both side laminated with 1mm thick decorative laminated sheet and 100mm wide wooden patti polished finished on top and sides complete in all respect as per approved Laminate sheet make, model, colour, design, drawing and directions of Engineer-in-Charge.

Providing and fixing counter platform adjoined to dias counter with width 600mm and height 900 mm, made of HDHMR board with top and vertical side 35 mm thick (double board) and centre partion with single board duly laminated with 1 mm deecorative lamiante on exposed surface, balancing laminate on innner side and all exposedsurface finished with 2mm edge binding tape including all necessary fitting, screws,adhesive complete in all respect as per approved Laminate sheet make, model, colour, design, drawing and directions of Engineer-in-Charge.

providing and fixing Wall Panelling with 16.75 mm HDHMR board fixed on gridsize 300 mm x 300 mm with 50mm wide HDHMR board frame, HDHMR board shall be duly side laminatedwith 1 mm thick decorative high pressure laminate sheet with top corner of panelling finished with 50mmx50mm teak wood moulding with polished including cost of nails,screws, adhesives etc complete in all respect. Laminate sheet make, model, colour to be approved by Engineer-in-Charge

Providing and fixing witness box of size 1100mmx 880mm with height 1100mm made with pine wod frame with dual side 16.75 mm HDHMR board dual laminated with 1 mm apporved Greenlam laminated sheet with teak wood polished patti on Top and Bottom side in polished finished including adhesive, screws etc complete in all respect all as per approved Laminate sheet make, model, colour, design, drawing and directions of Engineer-in-Charge.

Providing and placing Advocate table of size 2400mm x 500mm with height 700mm made of 16.75mm thick HDHMR board with table top and vertical side panel 35 mm thick (double board) laminated with 1 mm decorative laminated sheet on exposed and innner surface and 2 mm thick edge binding tape on all exposed edges with vertical modesty panel complete in all respect all as per approved Laminate sheet make, model, colour, design, drawing and directions of Engineer-in-Charge.

Providing and placing Judge Table size 2400mm x 900 mm with height 860mm made of 16.75 mm thick HDHMR board, with table top and vertical side panels 35 mm thick (double board provision), laminated with 1.0 mm decorative laminate on exposed surfaces, balancing laminate on inner surfaces, and 2.0 mm edge banding tape on all exposed edges, complete with two side storage cabinets (each having one lockable drawer on telescopic channels and one lockable shutter cabinet with stainless steel handle and lock), centre open leg space, and front vertical (modesty) panel, including all hardware/fixtures of approved make, all complete as per approved Laminate sheet make, model, colour, design and drawing and instruction of Engineer-in-Charge.

providing and placing office table/work station tableof size 1200mm x 600 mm with height 760 mmm made of 16.75 mmthick HDHMR board with table top and vertical side panles 35 mm thick ( Double board) , laminated with 1 mm decorative lamiante sheet on exposed surface, balancing laminate on inner surfcae and 2 mmthick edge binding tape on exposed edges complete with pullout keyboard tray, one lockable drawer with telescopic channels, one lockable storage cabinet with shutter, vertical modesty panel. all hardware, fiitings of all as per approved Laminate sheet make, model, colour, design and directions of Engineer-in-Charge.

Providing and placing storage/book cabinet unit 600 mm depth in court room made of 16.75 mm thick HDHMR board and back with 9 mm thick HDHMR board duly laminated with 1.0 mm decorative laminate on exposed surfaces, balancing laminate on inner surfaces, and all exposed edges finished with 2.0 mm edge binding tape, comprising of bottom storage section with laminated solid shutters fitted with Brass handles and locks, middle and upper storage section with laminated HDHMR Board shutters or 5 mm thick glass panels fixed in HDHMR frame, provided with adjustable shelves inside, complete with all necessary fittings, fixtures and hardware, all as per approved Laminate sheet make, model, colour, design and directions of Engineer-in-Charge.