PROVISION OF CERTAIN CIVIL WORKS UNDER GE (NORTH) BANGALORE

Amount

Demolition of cement concrete (un-reinforced ) of any description & in any position not specifically provided for complete etc all as specified and as directed

Taking down chowkhats or frames with shutters (without taking off shutter from frames) not exc. 1.5 sqm each etc complete all as specified and as directed

Taking down chowkhats or frames with shutters (without taking off shutter from frames) exc. 1.5 Sqm but not exceeding 4.0 Sqm each etc complete all as specified and as directed.

Taking down shutter of any description area exceeding 1.00 Sqm but not exceeding 2.00 sqm each etc complete all as specified and as directed.

Taking down cement plaster of any description hacking for key or raking out joint on old brick work/stone/concrete surface etc complete all as specified and as directed.

Taking down steel tubing & connections including cleaning for refixing serviceable pipe or removal balance pipe of 25 or 32 mm dia bore complete all as specified and as directed.

Taking down steel tubing & connections including cleaning for refixing serviceable pipe or removal balance pipe of 40 or 50 mm dia bore complete all as specified and as directed.

Dismantling of Stone Slab laid vertically, laid dry or laid dry and pointed of any description or thickness in etc complete all as specified and as directed.

Demolition of Reinforcement Cement Concrete (Pre-cast Drain cover Slab) not exceeding 15 cm thickness (Below or above ground level) etc complete all as specified and as directed.

Excavation in trenches, not exceeding 1.5 m wide and not exceeding 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 sqm on plan and n exceeding 1.5 m in depth and getting out in hard / dense soil etc complete all as specified and as directed .

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm. with soil complete all as specified and as directed.

Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5 Km above the starting point etc complete all as specified and as directed .

Material and Labour for Hard core with broken stone or boulder of gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15 cm thick water and rammed to a true surface etc all as specified and as directed.

Material and Labour for plain cement concrete 1:4:8 type D-2, with using 40 mm grades stone aggregates as in foundations and mass concrete etc complete all as specified and as directed.

M&L Pre-cast Cement concrete Type 1:3:6 using (20 mm graded stone aggregates) with solid blocks, exceeding 10 cm in width and setting in CM 1:6 etc complete all as specified and directed.

Material and Labour for Walling of Stone Masonry squared rubble, uncoursed well bonded, bedded and solidly hearted, built in CM 1:6 etc complete all as specified and directed.

Material and Labour for PCC 1:2:4 type B-0, using (12.50mm graded stone aggregate) as in surface channels and drains complete all as specified and directed.

Material and Labour for providing cement concrete type B0 1:2:4 (12.50mm graded stone aggregate) in copings, parapets and railing up to 60cm height, leveling concrete for Roof slab, kerbs, water troughs/Chajjas and the like including weathering, slightly rounded or chamfered angles and throating as directed

Material and Labour for Extra for forming fair finished drain or channel 45 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred / stopped ends etc complete all as specified and directed.

Material and Labour for Keyed pointing to random or polygonal rubble, uncoursed or brought upto course in CM 1:4 etc complete all as specified and as directed

Material and Labour for Keyed pointing to random or polygonal rubble, uncoursed or brought upto course in CM 1:4 including raking out joints/ pointing to masonry in single detached joints for flashing, etc complete all as specified and as directed

Material and Labour for rendering 10 mm thick in CM (1:6) on fair faces of brick work or concrete / Stone masonry surface finished even and smooth (without using extra cement) etc complete all as specified and as directed

Material and Labour for rendering 15 mm thick in CM (1:4) on fair faces of brick work or concrete/stone masonry surface finished even and smooth (without using extra cement) mixed with water proofing compound etc complete all as specified and as directed Notes : WPC shall be measured and paid separately

Material and Labour for rubber Moulded Pre-cast Kerb stones of cement concrete Type B-1 1:2:4 (with using 20mm graded stone aggregates) factory made, size, shape, pattern and finished as approved, including rounding, chamfered or half round and bedded of perfectly leveled surface pointed and jointed in CM 1:4 including fixing etc complete all as specified and as directed

Material and Labour for 75 mm thick cement concrete type D- 2, 1:4:8 (40mm graded aggregate) as in sub base of flooring etc complete all as specified and as directed

Material and Labour for 25 mm thick Cement concrete type B-0,1:2:4 (12.5mm graded aggregate) as in levelling course of flooring etc complete all as specified and as directed

Material and Labour for Screed bed or bedding layer of mortar 15mm thick in CM 1:6 for laying floor finishes complete all as specified and directed

Material and Labour for vitrified ceramic tiles (Dark shade/double charged/ultra charged) 10mm thick (square/rectangular)polished, area of each tiles exceeding 0.42sqm but not exceeding 1.00 sqm in vertical surfaces such as skirting/dados, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed

Material and Labour for 25 to 30mm thick granite Granite stone slab (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab including grinding the edges half round and polishing including 15 mm thick screed bed in CM 1:6 including demolition of stone slab (Laid bedded and pointed in any cement) etc complete all as specified and as directed

Material and Labour for machine pressed pre-cast concrete interlocking coloured paving Block of glass fiber reinforced glossy finished vibro compacted any shape and size confirming to IS-15658-2006 of 60 mm thick, M-35 grade to match with grey cement and pigment including 50 mm thick M Sand cushioning including demolition of stone slab (Laid bedded and pointed in any mortar) etc complete all as specified and as directed

Material and Labour for Screed or bedding layer of mortar 10 mm thick in CM (1:3) laid over roof slab to receiving water proofing membrane mixed with WPC as per manufacture instruction etc complete all as specified and as directed Notes : WPC shall be measured and paid separately.

Supply only water proofing compound (Liquid) complete all as specified and as directed.

Material and Labour for removing all loose gravel, dirt, oil, grease and foreign materials by jet or dry air, cleaning the surfaces mechanically or by grinding to make it smooth and APP modified water proofing membrane as per IS 1654-2017/IS 16352-2017, 3mm thick and weighing not less than 3.60kg/Sqm reinforced with non woven polyester/HMHDPE matt black finished over compatible primer/bonding bitumen @ 0.40 Litr/Sqm and torch applications of membrane with 75mm side overlap and 100mm end lap after necessary preparation of surface complete as per manufacturer's instructions and applying a coat of solar reflective bituminous aluminum paint on top @ 0.10 litre/sqm complete all as specified and directed incl taking down existing roof treatment etc complete all as specified and as directed.

Supply and fixing of Factory made 1.25 mm thick pressed steel frame of size 125 X 60 mm for door with one or more rebate including necessary fixing lugs, hinges, locks strike plate etc complete all as specified and as directed

Supply and fixing Factory made 1.25 mm thick pressed steel frame of size 105 X 60 mm for door with one or more rebate including necessary fixing lugs, hinges, locks strike plate etc complete all as specified and as directed

Material and Labour for cement concrete 1:3:6 type C-1 (using 20mm graded aggregate) as in hold fast and filling of pressed steel chowkhat etc complete all as specified and as directed

Supply and fixing of 35mm thick flush door shutter solid core construction with decorative choice lamination both sides of shutter, kiln seasoned and chemically pressure treated complete all as specified and as directed

Supply and fixing in repairs 18/19MM thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work, fixed in kitchen Cabinet or cupboards all as specified and as directed.

Material and Labour for Plain fillets square, rectangular or triangular in section clean sawn , secured with nails or brads of second class hard wood fixed to cupboard shutter Not Exceeding 3 sqcm cross section area all as specified and as directed.

Supply and fixing 40 mm dia cupboard knobs fixed with nut, screw and washer of Brass, polished complete all as specified and as directed.

Supply and fixing 30 mm width of flap (when open) Continuous (piano) hinges, mild steel, bright finish or electro galvanized etc complete all as specified and as directed

Supply and fixing of solid PVC frame (Single Rebated) of size 50mm x 47mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffener and fixed with 100mm x 8mm sheet metal CSK screws complete as specified and directed (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life)

Supply and Fixing factory made solid PVC moulded door shutter with wood free EPS, 28 to 30mm thick (Stiles) with 2, 4 or 6 raised panel design with 2mm thick moulded prelaminated PVC sheet on the front face and 2mm plain colour PVC sheet on back face etc. complete all as specified and as directed.

Supply and fixing of Powder Coating (minimum thickness of powder coating 50 micron) aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete shall as specified and as directed

Supply and fixing of Powder Coating (minimum thickness of powder coating 50 micron) aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws etc complete all as specified and as directed .

Supply and Fixing of 4mm thick sheet glass of ordinary quality and glazing with oil putty or wooden beading to wooden frame or steel frame in squares n exceeding 0.50 sqm in each pane complete all as specified and as directed .

Supply and Fixing of 4mm thick sheet Figured glass, pin head type and glazing with oil putty in squares in exceeding 0.5 sqm in each pane etc complete all as specified and as directed

Supply and Fixing of stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staple etc complete all as specified and as directed

Supply and Fixing of Aluminium anodised tower bolt 200 mm long of extruded section etc complete all as specified and as directed

Supply and Fixing of aluminium alloy, anodised sliding door bolt 300 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy etc complete all as specified and as directed

Supply and Fixing of 100 mm thick butt hinges, heavy weight, stainless steel and fixed etc complete all as specified and as directed

Supply and Fixing of 150 mm long aluminium handle, cast type, anodised etc complete all as specified and as directed

Supply and Fixing of 150 mm long Floor door stopper of aluminium alloy body and tongue, anodized, with hard drawn steel spring, fixed in floor etc complete all as specified and as directed

Supply and Fixing of Aluminium 100 mm Hasp and staple, safety type, mild steel hinge pin including bolt to hinge plate and fixed with screws etc complete all as specified and as directed

Supply and Fixing of 25mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors complete all as specified.

Supply and Fixing of 40 mm dia bore medium grade galvanized iron, tubing with all fitting and fixed complete to walls and ceilings or laid etc complete all as specified and as directed

Supply and Fixing of rotational moulded polythene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I capacity of tank 1000 ltrs incl dismantling of existing water tank etc complete all as specified and directed

Material and Labour for rotational moulded polythene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I capacity of tank 500ltrs including dismantling of existing water tank etc complete all as specified and directed

Supply and Fixing in repairs 25 mm dia of bore ball float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and as directed [Minimum weight for 20 mm – 210 gms] .

Supply and Fixing in repairs 25 mm gun metal, globe or gate valve with iron wheel head screwed both ends for iron pipe etc complete all as specified and as directed.

Supply and Fixing of 150 mm PVC (SWR) pipes, single socketed in any length with rubber ring joint fixed to stone masonry wall with suitable GI bracket etc including dismantling of existing pipe line and fittings etc complete all as specified and directed.

Supply and Fixing of 150 mm dia bore PVC bends (any radius) etc complete all as specified and as directed .

Complete removal existing treatment (External/Internal wall) by means of wire brushing, sand paper, manually or mechanically up to visible of plastered surface including rubbing and washing etc complete all as specified and as directed

Material and Labour for 1mm thick wall care putty on wall including preparation of surface with sand paper etc to obtain smooth surface etc complete all as specified and as directed

Material and Labour for Preparing new plastered surface of walls and applying two coats distemper oil emulsion, white or tinted over a coat of primer etc complete all as specified and as directed

Material and Labour for Preparing Old plastered surface of walls and applying two coats distemper oil emulsion, white or tinted over a coat of primer etc complete all as specified and as directed

Material and Labour for Preparing old or previously untreated Plastered / concrete surface of wall with complete removal of grass, algae, roots of any other foreign mtrl of any description including brooming down with steel wire brushing scrapping down smoke soot's ,moulds, moss and efflorescence, salts ,trading oil and greasy spots etc and Applying two or more coats of 100% premium acrylic emulsion paint (Apex Ultima) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company depot tinted) with silicon additives @ 1.43 litre/10sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm including filling the cracks etc with crack filling material as per manufacturer’s instructions complete all as specified and as directed.

Material and Labour for Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290-0 or Fe -E-165 etc complete all as specified and as directed

Material and Labour for Preparation of new or previously un-treated steel and iron surfaces of any description, over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and as directed

Material and Labour for preparing new concrete surface and applying two coat of synthetic enamel paint over a coat of primer etc complete all as specified and as directed

Supply and fixing 2nd class hard wood scantling clean sawn surfaces including a coat of creosote oil painting etc complete for grid work of wall panelling fixed with nails in the wall etc complete all as specified and as directed.

Supply and fixing 8mm thick Block boards, grade 1 quality, exterior grade, commercial type, Water proof, termite proof, fixed with screws to timber frame-work as in wall panelling / cub board shutter, shelves over 4mm thick MFD board, medium density, fiber board, single layer type or three layer type with BWR type adhesive, fixed with screws over 0.90 mm thick decorative laminate type 1, of surface finish, colour and pattern as approved, fixed with approved adhesive as per maker's instructions etc complete all as specified and as directed

Material and Labour for 10 mm thick plaster of Paris ceiling (Gypsum anhydrous) including sunk or raised moulding or coving, design, pattern as decided by Engr-In-Charge fixed in galvanized grid work including GI suspenders and joints of ceiling board shall be finished with textile tape etc complete all as specified and directed. Notes: Quoted rate is inclusive for grid work/extra design of ceiling, nothing extra shall be admissible on this account.

Material and Labour for preparing POP false ceiling and applying two coat of plastic emulsion paint over a coat of primer etc complete all as specified and as directed

Supply and Fixing of 18mm thick, PVC sheet one side prelaminated of approved texture, Celuca ply of Rajshree or equivalent as approved by GE as in kitchen cabinet /Cub Board shutter with shelves and partitions including necessary fittings and fixtures etc complete all as specified and as directed.

Supply and Fixing of stainless basket in various type of baskets such as plaint basket height 4", Thali basket 8" height, Cup saucer basket 4" height, and perforated cutlery basket 4" height all as specified and directed.

Supply and Fixing of Stainless steel channel for basket sizes 600mm long and 46mm wide all as specified and directed

Supply and Fixing of Stainless steel auto closing concealed hinges 9.5 cranks for half overlay doors with opening angle 95* (14-32mm) with integrated overlay adjustment + 2.50mm & depth adjustment 4mm complete all as specified.

Supply and Fixing of 125 mm size powder coated Stainless steel handle fit to modular section etc complete all as specified and as directed

SUPPLY AND FIXING in repairs stainless steel decorative curtain rod of 25 mm bore with wood finishes (weight not less 400 gms per running meter) including fancy finale caps cap (02 nos in each curtain rod) etc complete all as specified and as directed

Supply and Fixing in repair Brass Chromium Plated designer Bracket for curtain rod of dia 25 mm dia made out of SS Flat not less than 20 mm wide 1.50 mm thick and overall length not less than 160 mm fixed with screws min 2 Nos with Rawl Plug of size not less than 50 mm long etc complete all as specified and as directed

Removing building materials etc. (other than spoil payable under items 03028 to 03031 in Section-3—Earthwork) to a distance of exceeding 1.0 Km but not exceeding 1.50Km , beyond the lead included in the rates, including loading, unloading and stacking at the destination etc complete all as specified and as directed

Taking down carefully aluminium/ copper wiring/power point wiring (light, fan, socket or power) complete including fittings such as switches ceiling roses, pendants, regulators, sockets light fittings, fans etc and making good the disturbed surface of walls, ceiling etc including painting with same colour of the back ground complete all as specified and as directed by Engineer-in-Charge.

Wiring complete with 1.5 Sqmm single core PVC insulated unsheathed FRLS cable 1100 volts grade multi stranded with copper conductor conforming to IS 694 drawn through and including non-metallic rigid PVC conduit including accessories surface type/ concealed run on walls/ ceiling including MS terminal boxes fabricated with 1.6 mm thick MS sheet surface mounted/ concealed on walls with plastic laminated sheet top cover 3 mm thick fixed with cadmium plated iron screws for housing the switches, switch socket outlets, fan regulators etc, including provision of 1.5 Sqmm PVC insulated single core multi stranded FRLS copper conductor cable as earth continuity conductor and connecting to common earth dolly, all as specified and as directed. (a) One light point/Fan Point controlled by one switch

(b) One 6A Point controlled by one switch

Supply and Fixing of Modular switch 1 way 6A, 1 module all specified and as directed.

Supply and Fixing of Modular Socket 6A/16A-2/3 pin, combined 2 module all as specified and as directed.

Supply and Fixing of 2' x 2' Recess mounted LED Luminaire 36 Watts white powder coated CRCA housing with LEDs seamless front frame with flat white high transmission acrylic cover complete with all accessories all as specified and directed. Make: Bajaj Cat part No BZRS QL or its equivalent in Havells/ Philips/CG.

Supply and Fixing of energy efficient Ceiling fan 3 star rating including electronic fan regulator of 1200mm sweep, single phase 230/240 volts AC and connecting up to including provision of porcelain connector and flexible three core copper conductor of size 23/0.0076 from ceiling rose or connector to ceiling fan and testing on completion, complete all as directed by Engr-in-charge. Make: Bajaj/Crompton Greaves / Usha / Orient .

Supply and Fixing of Double Door vertical type DB SPN 4 Way 240 Volt with 200 Amps rated Bus Bar including necessary dummy plate all specified and as directed.

Supply and Fixing of connecting and testing ISOLATOR/MCB single (SP), 440 Volts of capacity 6 -32 Amps all specified and as directed.

Supply and Fixing of connecting and testing MCB single neutral (SPN), 440 Volts of capacity 40 Amps all specified and as directed.

Sub main wiring complete with two runs of 4 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable with one run of 4.0 sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through existing non metallic rigid PVC conduit and conduit accessories incl removing of the existing sub main wiring all specified and as directed. Note:-3 runs of cable will be measured and paid as unit length.

TECKXPERT ENTERPRISES