MAINTENANCE OF BUILDING AND INTERNAL SERVICES AT ASTE AND SDI UNDER GE AF MARATHAHALLI BANGALORE

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Petty repairs to joinery works such as easing of doos, windows, kitchen cabinets, refixing builder hardware gauage, etc, by providing glue nails and screws to the satisfaction of user and rectifying other misc minor carpentary works complete all as specified and as directed.

Petty repairs to plumbing / internal water supply works such as repair to leaking bib taps, pillar taps, mixers, stop cocks by tightening and providing washer repair to float valves, low levelled cistern by mixture adjustments leaking water supply lines by tightening the GI fitting or refixing W/S or sanitary fixtures using thread/teflon taps and including small GI fittings such as GI elbow, socket, union, etc as required at site complete all as specified and as directed.

Petty repairs to aluminium joinery works such as aluminium windows, aluminium ventilators and like similar works auch as easing of doors, refixing of doors, windows, refixing builder hardware such as aluminium beeding, etc., as required at site and complete all as specified and as directed.

M&L for Light shade Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick Screed bed or bedding layer for laying floor finishes in CM 1:6 etc complete all as specified and as directed.

M&L for Light shade Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm on vertical surfaces such as skirtings, dados and risers to steps etc.. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:4 etc complete all as specified and as directed.

M&L for Coloured Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick Screed bed or bedding layer for laying floor finishes in CM 1:6 etc complete all as specified and as directed.

M&L for Coloured Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, on vertical surfaces such as skirtings, dados and risers to steps etc.. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:4 etc complete all as specified and as directed.

M&L for Coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick Screed bed or bedding layer for laying floor finishes in CM 1:6 etc complete all as specified and as directed.

S&F glazed ceramic coloured tiles 7mm thick 450 x 300mm size in verticle surface set and jointed in neat cement slurry and pointed in white cement paste pigmented to the shade over and including 10mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:4 etc complete all as specified and as directed.

M&L for Granite (of any type) slabs/tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing including 20mm thick Screed bed or bedding layer for laying floor finishes in CM 1:6 etc complete all as specified and as directed.

M&L for 20mm thick Granite (of any type) tiles machine cut, in skirting/dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing including 10mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:4 etc complete all as specified and as directed.

M&L 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 20mm thick Screed bed or bedding layer for laying floor finishes in CM 1:6 etc complete all as specified and as directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed.

Taking down chowkhats or frame exc 1.5 Sqm but n.exc 4 Sqm each with shutters (W/out taking off shutters from the frames), door and window frames with shutters and refixing the same in other opening without damaging the door/windows etc complete all as specified and directed by Engineer-in-Charge. If damage the asset by the contractor, the same will be repair and remake the same without any extra payment complete all as specified and as directed.

Taking down chowkats or frame with shutter (without taking out shutter from the frame) not exceeding 1.50 sqm each complete all as specified and as directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet used and edges will be painted to match with printed sheet including reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded wood grain printed PVC sheet & 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (900 ) used instead of exposed portion of PVC sheet beading. colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and as directed.

S&F 125 mm long butt hinges extruded Aluminium alloy with galvanised mild steel hinge pin, bright polished Type B-21 fixed to PVC door with screws complete all as specified and as directed.

S&F 150mm long Aluminium anodised barrel tower bolts of extruded section fixed to PVC door with screws complete all as specified.

S&F 150 mm long Aluminium anodised handles extruded section fixed to PVC door with screws complete all as specified.

Taking Down shutters of any description exc 1.00 Sqm but n.exc 2.00 Sqm each and refixing in other opening without damaging the door including cutting the door bottom for adjusting of height if required, etc complete all as specified and as directed.

Taking down shutters of any description exc 1.00 sqm and n.exc 2.00 sqm each and refixing the same opening without damaging the door including cutting the door bottom for adjusting of height if required, etc complete all as specified and directed .

Taking down shutter of aluminium door shutters exc 1.00 sqm and n exc 2.00 sqm each and refixing the same opening without damaging the door by adjusting the bottom of door adjusting of height by cutting of Glass/Board etc. as required, including material and labour for joining cleats glazing clips, rubber neoprene packing , handle, hinges, anodised aluminium snap, mortice lock, beading screws, bearings etc. complete all as specified and as directed.

Taking Down shutters of any description exc 1 Sqm but n.exc 2 Sqm each etc. complete all as specified and as directed.

S & F powder coated anodised alluminium door shutters, aluminium sections weighing 0.55 Kg/m including joining cleats glazing clips, rubber neoprene packing , handle 2 Nos in each door, hinges, anodised aluminium snap, mortice lock, beading screws, bearings etc. complete all as specified and as directed.

S & F Powder coated anodised alluminium window and ventilator shutters sliding type without sash bar, aluminium sections weighing 0.55 Kg/m including joining cleats glazing clips, rubber packing , anodised aluminium snap beading, screws etc. complete all as specified and as directed.

Provision of 5.5 mm thick tinted glass exc 0.5 sqm of each pane of superior quality fixed to alluminium frame works with rubber beadings etc. complete all as specified and as directed.

S&F for 12mm thick both side choice laminated prelaminated particle board for insulation purpose, fixed to aluminium framework complete all as specified and as directed.

S&F in repairs , Aluminium (Extruded section body) Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed.

M&L for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed including takingdown existing one etc complete all as specified and as directed.

S&F in repairs floor door stopper 150mm length of cover plate aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor complete all as specified and as directed.

S&F in repairs Aluminium Mortice lock of 4 levers in vertical type of size 100 mm complete all as specified and as directed.

Hacking out old broken glass from metal frame of any thickness incl punching or drilling out old glazing pins/springs clips and providing and fixing new ones complete all as specified and as directed

S&F sheet glass ordinary quality 4mm thick in squares n.exc 0.50sqm in each pane for metal /wooden frames etc complete all as specified and as directed.

S&F sheet glass ordinary quality 4mm thick in squares exc 0.50sqm in each pane for metal /wooden frames etc complete all as specified and as directed.

S&F figured glass, pinhead type 4mm thick in squares n.exc 0.50sqm in each pane for metal /wooden frames etc complete all as specified and as directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) and boarding any thickness, including cover fillets complete all as specified and directed.

S&F false ceiling grid of size 600 x 600 mm system using hot dipped galvanized steel section with precoated capping, main tee of size 24x32 mm having 0.27mm thick at every 1200mm centre to centre, cross tee of size 24x27 mm having 0.25mm thick at 600mm centre to centre and wall angle of size 19x19 mm having 0.35 mm thick fixed to the periphery of the wall, and suspended at every 1200mm centre to centre in both directed using 2.00 mm thick GI wire and fixing 600 x 600 x 16 mm mineral fibre tegular edge ceiling tiles of RH90 complete all as specified and as directed.

Taking up or down GI tubing 15 mm bore pipe including cleaning for re-fixing or removal to store complete all as specified and as directed.

Taking up or down GI tubing 20 mm bore pipe including cleaning for re-fixing or removal to store complete all as specified and as directed.

Supplying and laying of 16mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified complete all as specified and as directed.

Supplying and laying of 20mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified complete all as specified and as directed.

S&F in repairs Vitreous china wash down water closet pan (pedestral pattern) white excluding fixing bolts, flushing cistern and flush pipe but including fixing charges complete all as specified and as directed.

S&F in repairs Single piece Vitreous china wash down water closet pan (pedestral pattern) fixed on floor/wall with flusing arrangements including fixing bolts, flushing cistern and flush pipe but including fixing charges/instalations, complete all as directed by Engr-in-Charge. Make : CERA Model : CASCADE or equivalent

S&F in repairs vitreous China squatting pan of Orrissa pattern of approved make of size 580 mm X 440 X 260 mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe incl lime concrete bedding and connection to antisyphonage pipe etc including making good to floor complete all as specified and as directed.

S&F in repairs vitreous China wash basin, white, flat back, size 550 x 400mm including waste fittings, brass, Cromium plated with long screwed shanks and fly-nuts, flanged end bedded in red lead cement and other end fixed and brackets including cutting for and pinning in ends of brackets or errecting stand etc complete all as specified and as directed.

S&F in repairs 32mm dia flexible waste pipe for wash basin and kitchen sink complete all as specified and directed.

S&F in repairs Vitreous China urinals, half stall type (back or corner wall type),complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe), complete all as specified and directed.

S&F in repairs Ceramic wall mounting Urinal in white with integrated Electronic Sensor complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including screws, pointing around urinal back in cement; ,flush pipe, grating and Union for discharge pipe. Including fixing supply pipe to flushing cistern, trap and waste pipe/instalation charges etc. complete all as specified and directed. Make : CERA, Model : HC1745900-S-PM17338 or equivalent

S & F in repairs PVC valveless, syphonic action type flushing cistern 10 ltr capacity low level white with inlet ballvalve float and handle including brackets, Flush pipe of polyethylene of low or high density or PVC 32mm dia, for low level cistern complete all as specified and as directed.

Supply and Fixing in repairs health faucets Chromium plated (hand shower) with 8mm dia 1.50m long flexible hose, wall hook fixed with brass screws and all accessories complete all as specified and directed.

S&F in repairs CP Fancy type 15mm bore Pillar taps, cast copper heads, capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and as directed.

S&F in repair CP 15 mm dia bore bib taps cast copper alloy with crutch and butterfly handle, screwed for iron pipe, or for brass ferrule complete all as specified and as directed.

S&F in repair CP 15mm dia bore Brass CP mixer for mixing hot & cold water screwed down for iron pipe complete all as specified and as directed.

S&F in repairs toilet paper holder fixed to walls with chromium plated brass screws complete all as specified and directed.

S & F in repair CP Stop valve 15 mm bore cast copper alloy screwed down high pressure with crutch butter fly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S&F PVC connection 15 mm size with PTMT nuts of length 450 mm of approved quality complete all as specified and as directed.

S&F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe (Minimum weight 60 Gms) complete all as specified and as directed.

S&F in repair brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges complete all as specified and as directed.

S&F in repair CP soap tray fixed to walls with rubber plugs complete all as specified and directed.

S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm longcomplete all as specified and directed.

S&F in repair 100mm dia grating doom with/without waste hole of PTMT (Minimum weight 40 gms) complete all as specified.

S&F waste coupling of PTMT (half or full threaded) (minimum weight 32mm-45gms/40mm-60gms) . complete all as directed .

S&F waste coupling of PTMT (half or full threaded) (minimum weight 40mm-45gms/40mm-60gms) complete all as specified and as directed.

Taking down rain water pipe and eaves gutters (any size and pattern) including all fittings heads shoes bends swan necks etc complete all as specified and as directed.

S & F 110 mm bore of pipe PVC (SWR) pipes single socket in any length with rubber ring joint fixed to walls with MS clamps as directed 6 Kg/Sq cm complete all as specified and as directed.

S & F 110 mm bore of pipe PVC (SWR) bends of any radius / shoe fixed to PVC pipes complete all as specified and as directed.

S & F 75 mm bore of pipe PVC (SWR) pipes single socket in any length with rubber ring joint fixed to walls with MS clamps as directed 6 Kg/Sq cm complete all as specified and as directed.

S & F 75 mm bore of pipe PVC (SWR) bends of any radius / shoe fixed to PVC pipes complete all as specified and as directed.

Demolition of brickwork or stone/ boulder masonry, built in cement mortar , incl all quions, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

Material and labour for Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width Type C1 1:3:6 (20 mm graded aggregate ) and setting in mortar CM 1:6 complete all as specified and as directed.

Demolition of Cement Concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) in foundation, filling and mass concrete all as specified and directed.

M&L for Cement concrete 1:3:6 type C-2 (using 40mm graded agg) of 75mm thick as in plinth protection complete all as specified and as directed.

Material and Labour for PCC (1:2:4) type B1 using 20 mm graded stone aggregate as in coping, mud stops, benching, water tank platform etc.on roof, chajja weathering, slightly rounded or chamfered angles and throating etc. including necessary form work complete as directed.

Demolition of Cement Concrete (reinforced) of any description and in any position not otherwise specifically provided for, complete all as specified and directed.

M&L for precast cement concrete type B1 1:2:4 (20 mm graged aggregate) as in manholes cover slab, etc.(of any section indicated), with plain fair faces, including chamfers weatherings, throating etc. and setting in cement mortar 1:4 complete with joints to match complete all as specified

M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Taking down Cement plaster including raking out joints hacking for key scrubbing down with water etc complete all as specified and as directed.

M&L for rendering 15mm thick in patches in cement mortar 1:6 on other than fare face of brick work or concrete surfaces and finishing the surface even & smooth without using extra cement complete all as specified and as directed.

M&L for rendering 15mm thick in patches in cement mortar in 1:4 on fare face of brick work or concrete surfaces even and smoothe without using extra cement complete all as specified and as directed.

Dismantling water tanks capacity exc 500 n.exc 1000 litre and removing to store etc complete all as specified and as directed.

S&F 500 ltrs capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed.

S&F 1000 ltrs capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed.

S&F in repair round moulded PVC water tank lid for 500 litres / 1000 litres complete all as specified and as directed.

S&F 20 mm ball valves high pressure of PTMT with epoxy coated aluminium rod & hihdesity plastec ball screwed for iron pipe and fixed. (Minimum weight 20mm - 210 gms) etc complete all as specified and as directed.

S & F 25mm bore valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe minimum wieght for 25mm-455 grams as in repairs complete all as specified and as directed.

S&F 16mm bore CPVC gate/Ball valves complete all as specified and as directed.

S&F 20mm bore CPVC gate/Ball valves complete all as specified and as directed.

S&F in reparis 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed unions etc. complete all as specified and as directed.

Disconnecting existing tanks capacity exc 250 n.exc 500 litre, setting aside (lowering if required) for repairs and cleaning and removing all scale and dirt by useing chemicals etc from tanks and form mouths of circulatory pipes and hoisting if required and refixing in position, complete all as specified and as directed.

Disconnecting existing tanks capacity exc 500 n.exc 1000 litre, setting aside (lowering if required) for repairs incuding cleaning and removing all scale and dirt by useing chemicals etc from tanks and form mouths of circulatory pipes and hoisting if required and refixing in position, complete all as specified and as directed.

M&L for preparation of new surface/undecorated surfaces of walls and applying two coats of Cement Base Paint of approved tint over a coat of priming on plastered and other surfaces with alkali resistant priming paint complete all as specified and as directed.

M&L for preparation of new surface/undecorated surfaces of walls and applying two coats of Oil bound distemper over a coat of priming on plastered and other surfaces with alkali resistant priming paint including one coat of Birla white putty etc complete all as specified and as directed.

Removing building materials etc. to a distance of 5 Km out side MoD/Unit land including loading, unloading and stacking at the destination etc complete all as specified and as directed.

S&F in repair galvanized mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm dia and fixed with tinned tacks or galvanised wire staples, complete all as specified and directed.

Siddivinayaka Constructions

M/s STAR ELECTRICALS

PRAGATHI BUILDERS