Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.4 LAccepted-AOC | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹35.6 L+₹89,518.60 (2.58%)Rejected-Finance | L2 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 3 | L3₹35.9 L+₹1.2 L (3.44%)Rejected-Finance | L3 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 4 | L4₹36.4 L+₹1.8 L (5.10%)Rejected-Finance | L4 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 5 | L5₹36.6 L+₹2.0 L (5.68%)Rejected-Finance | L5 | Rejected-Finance OTHER THAN LOWEST BIDDER |
Tender Value
₹49.9 L
EMD Value
₹99,800
Closing Date
10 Nov 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NAGROTA
GE NAGROTA
SPL REPAIRS TO BLDG NO PS-209 (08XQTRS) , PS-517 AND ADDITION / ALTERATION TO PERMANENRT DRAIN AT MCFC AT NAGROTA
2023_MES_624101_1
8565/E8
Open Tender
Civil Works
Item Rate
180 days
NAGROTA
Cass D Category a i
8 documents required · 8 mandatory
₹500
GE NAGROTA
₹99,800
Yes
12 Feb 2024
19 Oct 2023
17 Nov 2023
19 Oct 2023
10 Nov 2023
4 Nov 2023
Amount
SCHEDULE ‘A’ PART-I ( LIST OF B/R WORKS AT NAGROTA) Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc 1.50 sqm each and removing from site complete all as specified and directed
Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc 1.50 sqm eachand n exc 4 sqm and removing from site.complete all as specified and directed
Taking down shutters of any description exc 1 Sqm but n exc 2 Sqm each complete all as specified and directed
Demolition of brick work built in cement mortar including all quions, arches, pillars etc but excluding ashlar facings dressed stone work and precast concrete articles.complete all as specified and directed
Demolition of cement concrete (unreinforced) in ground floors and paving not exc 15cm thickness.
Demolition of cement concrete (unreinforced) of any description and any position not other wise specifically provided.
Demolition of cement concrete (Reinforced) of any description and any position not other wise specifically provided reinforcement cut as required to facilitate demoltion.complete all as specified and directed
Taking down cement plaster on brick or stone wall etc including racking out joints, hacking for key scrubbing down with water etc to receive new plaster etc.complete all as specified and directed
S&F Mild steel framed work as in doors ( as in chowkats)or gates of angle or other section with guest plates rails, braces rail etc exculsive of steel sheeting or other covering hanging also fastening and fixing complete confirming to Gde Fe-410-0 or Fe-310-0 including shop coat of red oxide including preparation of surface before fixing. complete all as specified and directed
Solid PVC Door Frames of size 50mm X47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed
S&F 100mm long butt hinges (medium weight) colled rolled mild steel fixed with welding.complete all as specified and directed
S& F Floor door stopper of aluminium alloy body and tongue ,anodised ,with hard drawn steel spring ,fixed in floor overall length of cover plate 140mm complete all as specified and directed
S&F Extruded aluminium alloy handles fabricated type anodised of size 125mm long 12mm dia. complete all as specified and directed
S&F MS 300 mm ordinary rat rails rod pattern springs including roller and roller plate.complete all as specified and directed
S&F Hold fast/clamps of mild steel stay for rain water pipes etc confirm to Fe-290 Gde E 165.complete all as specified and directed
S&F Magic eye with magic glass of all as spd and directed steel body complete all as specified and directed
S&F Hasp and staple Alumnium anodised lncluding bolt to hinges plate 100mm size complete all as specified and directed
S&F 250mm long aluminium alloy, anodized sliding door bolt with hasp stapple ( bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed.complete all as specified and directed
S&F Aluminium anodized 150mm long barrel tower bolt of extruded section and fixed.complete all as specified and directed
S & F Box type Steel windows with double shutters (inside for wiremesh & out side for glass), incl guard bar,hinges, steel handle, tower bolt and steel peg stay complete with glazing bar dovetailed or welded including a coat of red oxide after preparation of surface before fixing. complete all as specified and directed
S & F Box type Steel ventilators top hung double shutters (inside for wiremesh & out side for glass), incl guard bar,hinges, steel handle, tower bolt and steel peg stay complete with glazing bar dovetailed or welded including a coat of red oxide after preparation of surface before fixing. complete all as specified and directed
Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain PVC sheets for top rail lock rail and bottom rail on either side and as gap insert for top rail and bottom rail panelling of plain colour PVC sheetto be fitted in the MS frame welded/sealed to the styles and rails with suitablePVC sheet beading and joined together with solvent cement, suppling and fixing in the frame at site as per specification and drawings.complete all as specified and directed
S&F Factory made, 2nd class hard wood, plain framed, paneled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both sides, the size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated, 35 mm thick complete, all as specified .
S&F 35mm thick 2nd class hard wood glazed and skelton shutter open rebated and prepared to receive glass ,gauge etc ( without sash bar) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc size of members of shutters as specified in SSR Part-I, section 8 clause 8.20(a), supplied and fitted to chowkats.complete all as specified and directed
S&F 19mm thick solid PVC board prelaminated one side and other side plain as in cupboard shutter ( Board must be water proofing ,termite proof) .
S&F Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm dia and fixed with tinned tacks or galvanised mild steel staples
S&F Sheet glass 3.00mm thick ordinary quality and glazing with oil putty in square n exc 0.5 Sqm.in each pane
Description as per item No 30 but figured glass
S&F Curtain rod 25mm dia aluminum brass polished with ends bulbs rings of required size including bracket complete all as directed.
M&L for Brick work with sub class “B” bricks straight or curved on plan exc 6M mean radius build in CM 1:6 using all as specified using old size bricks complete all as specified and directed
M&L for Rendering 10mm thick on un-fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth without using extra cement all as specified ( internally)complete all as specified and directed
M&L for Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished using wpc ( wpc to be paid measured and seperately) even and smooth without using extra cement all as specified ( Externally)complete all as specified and directed
M&L for Rendering 5 mm thick in CM (1:3) on ceiling finished even and smooth without using extra cement including two coat of white wash on ceiling including preparation of surface .complete all as specified and directed
Supply only integral water proofing compound.complete all as specified and directed
M&L for Providing 10mm thick cement plaster in CM 1:4 on parapets over roof and finished surface even and smooth without using extra cement complete all as specified and directed
M&Lfor Roghening surfaces of old concrete surfaces of any description over damaged surfaces irregular fascia, chajjas and in similar work and also for narrow width etc and rendering dubbing coat 15mm thick cement plaster in CM (1:4) over a coat of cement slurry @ 3.00 Kg/Sqm making surface even followed by 05mm thick rendering in CM (1:3) finished complete all as specified and directed
M&L for Applying two coats of synthetic enamel paint on new steel surfaces any description, not otherwise described over 10 cm width or girth
M&L for Applying two coat of synthetic enamel paint over a coat of pink primer on new wooden surfaces of any description, not otherwise described over 10 cm width or girth including preparation of surfaces.
M&L for Preparing newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of wall putty 2 to 3mm thick on plasterd surfaces preparatory to distempering on wall surface .complete all as specified and directed
M&L for Complete removal of existing treatment applying two coats of oil bound distemper over a coat of wall putty 2 to 3mm thick on plasterd surfaces preparatory to distempering on wall surface .complete all as specified and directed
M&L for Preparing newly plastered surfaces of walls and applying two coats of cement base paint .complete all as specified and directed
M&L for Complete removal of existing treatment applying two coats of cement base paint old wall surface .
Preparation of old plastered surfaces of ceiling and applying two coat of white washing, all as specified.
M&L for Machine cut kota stone flooring 18-20 mm khick laid and jointed with grey cement slurry mixed with pigment to match the shade of the stone including grinding and polishing ( mirror finish) (Each stone not less than 55 cms x 55 cms) over 15mm thick screed bed in CM ( 1:4) as in floor finished rough including roughening of existing surfaces by pick axicess and applying a coat of cement slurry @ 03 Kg/Sqm of surface.
Ditto as per item No 44 above but in tread of steps of size (0.90-1.00x 20-30cm)
M&L for Machine cut kota stone slab 18-20mm thick in skirting, dado and pillar laid and jointed with grey cement slurry mixed with pigment to match the shade of the stone including grinding and polishing ( mirror finish) over 15 mm thick rendering in CM ( 1:4) including taking out of existing dado.
All as per item No 46 above but in riser of staircase of size (0.90-1.00x 18-25cm) complete all as specified and directed
M&L for Marble work 15mm thick (550mm long X 75mm wide strip) as in border in flooring,over 15 mm thick screed in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigments to match with white marble including rubbing, grinding and polishing. complete all as specified and directed
M & L Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete as in cooking plateform of any size incl cutting for sink over 20 mm thick screed in CM 1:4 including roughing of existing surface and applying a coat of cement slurry @ 03 Kg/Sqm of surface and pointing with white cement 1:2 using marble dusts admixture of pigment to match. complete all as specified and directed
All as per item No 49 above of size 550x 75 - 100mm (as on edges of cooking plateform complete all as specified and directed
M & L for Non-skid coloured tiles 400x400x7mm thick as in floors set and jointed in neat cement slurry and pointed in coloured cement to match over & incl 15 mm thick screed bed or beddding layer of CM 1:4, complete all as specified and directed
M & L for 25mm thick PCC 1:2:4 type B-1 as a sub base to receive topping layer finished even and rough 15 mm thick
All as per item No 52 above but 600x300x7mm thick glazed ceramic tiles as on walls/ vertical surfaces over 10mm cement rendering in cement mortar 1:4, including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing ) , removing serviceable tile to store and rubbish off the premises.15 mm thick
M & L for PCC 1:2:4 type B-1 as in benching coping etc and similar items including weathering slightly rounded or chamfered angles and throating on top of chajjas rails cills etc.
M & L for PCC 1:3:6 C-1 (using 20mm graded crushed stone aggregate) as in plinth protection ( 50mm thick ) finished even and fair all as specified.
M & L for RCC 1:2:4 type B-1 ( using 20mm graded crushed stoneagg) as in chajjas shelves and similar items.
M & L for Form work to chajjas troughs and similar items including edges.
M & L for Form work to edges of concrete flats RCC/PCC band exc 5 cm but exc 10 cm.
S&F TMT bars 10mm dia and over cut to lengths bent to shape required including cranking bending and spirally hoping for columns hooking ends and binding with MS wire annealed n.less then 0.90mm dia.
All as 59 above but 6mm to 8mm dia -ditto-.
S&F Framed work rolled section as in framing compound girder staging for water tank,cooler frame as and the like built up from two or more beam or channel section or angles with plates stiffeners etc 15 mm thick.
S&F Rotational moulded polyethene water storage tank 500 ltr capacity hoisted and fixed in position including dismantling of existing tank and including PVC float valve 20 mm bore . 15 mm thick
Taking down steel tubing and connection including cleaning for refixing or removal to store bore of pipe 15mm bore
Taking down steel tubing and connection including cleaning for refixing or removal to store bore of pipe 20mm
S&F 20mm bore GI tubing (medium grade) with all fittings and fixed complete to walls and ceiling or laid in floors.
All as per item 65 above but fixing only
S&F 15mm bore GI tubing (medium grade) with all fittings and fixed complete to walls and ceiling or laid in floors/roofs including taking down.
All as per item 67 above but fixing only
M&L for Cuttings chases for concealed water tubing of concealed conduit (cutting n.exc 10 cms girth) and making good in CM ( 1:3) in brick walls.
S&F Shower rose brass chrominium plated 125mm size.
S&F Cast copper alloy CP bib tap fancy type screwed down , screwed for iron pipe 15mm dia/ bore of pipe
S&F Cast copper alloy CPstop cock /angle Valve fancy type screwed both ends for iron pipe 15mm dia/ bore of pipe
All as per item No 72 above but with long shank and cup ( concealed type)
S&F Stop valves ,cast copper alloy ,screwed down high pressure , with crutch or butterfly handle , screwed both ends for iron pipe or for union 20mm dia
S&F Towel rail 600mm long of PTMT fixed with including chromium plated brass screws and wooden/plastic cleats ( Minimum weight 190gm).
Dismantling cast-iron/PVC pipes including fittings taking out of trenches or walls as required dia of pipe upto 100mm.
S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls for 110mm bore.
S&F PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floor for 110mm bore.
S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls for 75mm bore.
S&F PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floor for 75mm bore.
S&F PVC (SWR) Bends any radius for 110mm bore.
S&F PVC (SWR) Bends any radius for 75mm bore with oval access door.
S&F PVC (SWR) Branch pieces single( Single Y) equal or unequal) for 110mm bore with oval access doors.
S&F PVC (SWR) Branch pieces single ( Single Y) equal or unequal for 75mm bore with oval access doors.
S&F PVC (SWR) vent cowl 75mm
All as per item 85 above but 110mm
S&F PVC (SWR) floor trap with grating including jointing to waste pipe in solvent for 75mm bore including CP grating cover with or without hole complete.
S&Fas in repair Vitreous china squatting pan "Orissa " pattern size 580x440mm white with integral foot rest all as fixed in repairs including ‘P’ or "S" trap including PVC low level cistern of 10 litres capacity including brackets jointing to flush pipe, PVC connection (450x15mm) flushing pipe complete fixed in repair all as directed by Engr-in-Charge.
S&F as in repair 110 mm PVC (SWR) WC Connector with lip ring
Dismantling brick tiles or terracing tile, single layer on roof including cleaning the roof surface and filling the cracks with silicon compound if obsserved on roof
M&L for PCC 1:2:4 type B-1 (20mm graded aggregate ) 50mm thick as in padding finished even and smooth witout using extra cement
M&L for Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 Kg per sqm including bitumen primer @ 3.5Kg/Sqm
M&L for Laying APP (atatic polypropylene) modified membrane 3mm thick and weighing not less than 3 kg/sqm with 160 GSM/sqm, non woven polyester mat as center core reinforcement, laid with 75 mm side over lap and 100mm end over lap, the membrane has to be laid with LPG tourch and over lap sealed and finished neat over roof including a coat of bitumen 85/25 at the rate of 1.2 Kg per sqm over APP membrane with aluminium paint on top .
M&L for Forming square grooves in plaster n exc 12mm deep and n exc 15mm on face
Taking down existing cement plaster of sunken floor/wall,roughening and cleaning by brushing wire brushes to remove all dirt, withand including applying a coat of industerial bitumen 85/25 penetration @ 1.20kg/sqm over rendering 15mm thick in CM 1:3 using WPC finished rough over a coat of neat cement slurry @ 3.0kg/Sqm complete all as specified and as directed. ( wpc to be paid measured and seperately).
S&F as in repair kitchen rack made out of 0.63mm thick stainless steel sheet wall mounted type with 5/6 partition of size 60 cms x 90 cms x 25 cm fixed on wooden gutties complete all as directed by Engr-in-Charge.
S&F as in repair stainless steel sink made from AISI-304 (18/8) gde steel of 1mm over all size 688x534 bowl size 610x455x250mm complete all as directed by Engineer-in-Charge & with following specification :- (a) Stainless steel waste coupling. (b) 02 Nos MS angle iron bracket 45cm long made out of MS angle iron 35x35x5mm. (c) Waste pipe and waste coupling.
Chequered cement concrete coloured tiles 30 cm x 30 cm x 25 mm thick set , jointed and pointed in neat cement slurry with grey cement and pigment in floors complete all as specified and directed
M&L for Screed bed or bedding layer of mortar 20 mm thick for laying floor finishes in CM 1:6
M&L for PCC (1:3:6) 75 mm thick Type C-2, using 40mm graded stone aggregate as in floors in bed to recive tiles /path tiles etc complete all as specified and directed .
M & L for Non-skid coloured tiles 8-10mm thick dark shade (Square/rectangular) polished area of each tiles not exceeding 0.38 Sqm as in floors set and jointed in neat cement slurry and pointed in coloured cement to match over screed bed or beddding layer of CM 1:4, 15 mm thick over
Taking down chowkhets or frames with shutter (without taking off shutters from the frames) exc 1.50 Sqm and n.exc 4.00 Sqm each .
S & F pressed steel frames made of size 1.25mm thick MS steel for door with one or more rebates incl lugs, hold fast, lock strike plate etc complete of size 105 x 60mm including one coat of red oxide primer and PCC 1:3:6 as in back fill to chowkats complete all as specified and directed
Preparing of previously painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed
All as per item No 105 above but 1000 litrescomplete all as specified and directed .
Repairing of old chromium plated bib taps, pillar taps, wash hand basin mixture, stop cock, angle valve, concealed stop cock and similar items by changing its brass phases and making it functional to the entire satisfaction of user and Engineer-in-Charge complete all as directed at site
M&L for Cement concrete 1:3:6 type C-1 using 20mm graded aggregates as in surface channel & drain incl form work.
S&F vitreous china wash hand basin white flat back of size 550x400 mm with pedestal including bracket, cutting for and pinning the ends of brackets or erecting stands exclusive of waste pipe but including brass chromium plated waste coupling with long screwed sank and fly nuts complete all as specified.
M&L cement concrete tiles 25 cm x 25 cm x 20 mm thick mechine pressed set , jointed and pointed in neat cement slurry with grey cement on roof over APP membrane laid over 15mm thick cement screed bed in CM 1:6 complete all as specified.
Cleaning of drain or channel of any depth and in any position by removing liquid mud/soil , silt, both organic and in-organic nature matters from the drain and making if good for repair work including removing waste material / soil etc to a distance exc 500m but n.exc 1000m and depositing the same out side MOD land Complete all as specified and directed.
Exacavation in trenches , n exc 1.5m wide and n exc 1.5 m in depth for for foundation ,etc or for shaft ,well , cess pits, manholes, pier holes etc n exc 10 Sqm on plan n exc 1.5 in depth and getting out in any type of soil.
Returing filling in including spreading, levelling watering and well ramming in layers not exceeding 25 cm thick in any type of soil.
Removing excavated material n exc 50m and depositing where directed at a level n exc 1.5 m above the starting point
M & L PCC 1:4:8 type D-2 (Using 40 mm grade aggregate) in foundation, filling and mass concrete
M&L for Brick work with sub class “B” bricks straight or curved on plan exc 6M mean radius build in CM 1:6 using all as specified using old size bricks
M&L for walling of random rubble masonary uncoursed built in CM 1:4 all as specified and directed.
All as item No-117 above but except stone.
M & L PCC 1:3:6 type C-1 (Using 20 mm grade aggregate) in surface channel & Drain Incl form work.
M & L for extra over hammer dressed facing with maximum depression on face from straight edge held against the dressed surface.
M & L Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165complete all as specified.
M & L for extra over hammer dressed facing with maximum depression on face from straight edge held against the dressed surface.
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc
All as per item No- 123 above add or deduct for each 25mm girth over under 30cm girth.
Taking down carefully unserviceable Aluminium point wiring complete (light, fan socket, bell or power) with fitting such as switches, ceiling rose lamp holder, regulators, sockets, light fittings etc. and keeping in safe custedy for taking credit all as specified and as directed by Engr-in-Charge
Taking down ceiling fan/Exhaust fan any sweep, removing blades ,cleaning the fan completely for dust and dirt, oiling & greasing and hanging the same back to its original positions including connecting with three core flexible copper wire to ceiling rose etc after the completion of the point wiring including replacement of old unserviceable fan hook, rubber pad, nut bolts and washers etc, complete, all as specified and directed by Engr-In-Charge.
Taking down existing energy meters, keeping aside safely & refixing the same in its original position after making functional & after completion of point wiring/sub main wiring, complete, all as specified and directed Note:- Small items required for fixing the electric energy meter at site shall be provided by the contractor and cost for the same shall be deemed to be included in the quoted rates.
Taking down existing electric water heater, keeping aside safely & refixing the same to its original position after servicing of the whole geyser/making functional and after completion of wiring work, complete, all as specified and directed Note: If any part found unserviceable during the refixing of water heater at site shall be provided by the contractor and cost for the same shall be deemed to be included in the quoted rates.
M&L for Concealed Point wiring using FRLSH PVC insulated unsheathed multi strand copper conductor cable 1100 volt garde 1.5 sqmm including 1.5 Sqmm FRLSH PVC insulated unsheathed multi strand copper conductor earth wire drawnIN and including PVC conduit medium grade ISI marked not less than 20 mm dia concealed in wall & surface on ceiling with all conduit fittings etc terminated in and incl concealed pressed steel sunken box readily available ( having wall thickness not less than 1.22 mm upto 200 x 300 mm box size & having wall thickness not less than 1.63 mm beyond 200 x 300 mm ) duly covered with 3 mm thick bakelite sheet cover for fixing switches , sockets , fan regulators etc incl testing and making good to disturbed surface to match existing surface for one light/fan/bell point complete all as specified and directed.
All as per Srl item N0 129 above but for one socket out let 5Amp controlled by one switch on same board with other switch .
All as per Srl item N0 129 above for one socket out let 5 Amp controlled by one switch on independent board with other switch .
All as per Srl item N0 129 above but controlled by two , two way switch .
All as per item No 129 above but point wiring with 2.5sqmm FRLS multi stranded copper conductor cable for main circuit and 2.5sqmm cable as earth continuity conductor for one 15Amp socket out let controlled by one 15Amp switch on independat board.
M&L for point wiring with PVC insulated unsheathed 1100 volt grade FRLS cable with multi stranded copper conductor of size 4.0 Sq mm (Nominal area) in wall and surface on ceiling with all conduit fittings & fixing acessories inculding sunken anodised pressed steel terminal box not less than 1.2mm thick covered with 3 mm thick plastic laminated sheet cover of suitable size with brass screws for mounting switches, sockets, regulators with and including 4.0 sqmm FRLS multi stranded copper conductor for controlled by two pin and earth plug and socket complete with one single pole MCB 20 amp 240V drawing as continuous earth wire connected to main earth and earth dolly complete all as specified.
S&F Single pole & neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 amp 240V complete, all as specified and directed
S&F switch piano flush type 5 Amps single pole one way complete, all as specified and directed
S&F switch socket combination 2 in 1, 3 pin, 5 Amp flush type complete, all as specified and directed
S&F switch socket combination 2 in 1 5 pin 5 /15 Amps flush type complete.
Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm including cutting of hole of required size.complete, all as specified and directed
S & F Modular snap switch SP one way 5/6 Amps suitable for 1 Module complete all as specified.
S & F Modular snap switch SP one way 15/16 Amps suitable for 1 Module complete all as specified
S & F Modular socket 2/3 pin 5/6 Amps suitable for 2 Module complete all as specified.
S & F Modular socket 5/6 pin 15/16 Amps suitable for 2 Module complete all as specified.
S&F of ceiling rose 3 terminal complete PVC/Polycarbonate isolated boly complete all as specified and directed.
S & F Modular white cover plate incl Modular base frame for complete 8 module complete all as specified.
S & F Modular white cover plate incl Modular base frame for complete 6 module complete all as specified.
All as per Item No-147 above but 2 module complete all as specified.
All as per Item No-147 above but 3 module complete all as specified.
S&F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc as required all as specified and directed.
Supply and fixing LED lights fitting CRCA Channel 1x 18W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete, all as specified and directed
S&F for lamp holder PVC/polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.
S&F for LED bulb 7 watt complete all as specified and directed. Make Bajaj /Havells
S&F Modular bell push piano type 5 Amps complete.
S&F electric bell ding dong 230 volt AC complete,
S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size.
Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete.
S&F sheet metal enclosure distribution board SPN 8 way 230 V, 50 Hz double door with neutral, Earthing bar and din rail complete
S&F MCB SPN 40 A to 63 A 10 KA 240 volts "C" series complete
S&F MCB single pole 6 to 32 Amps 10 KA 240 volts "C" series complete
S&F sheet metal enclosure double door for distribution board factory made for MCB DB load link Vertical TPN 4 way suitable for MCCBas incomer, 125 Amp,4 pole. (when MCB's are to be used) with suitable size of busbar complete,fixed flush in wall including chases wall for fixing DB and making good the distributed wall surfaces to match with existing specification including taking down all as directed by Engr-in-Charge at site incl taking out of exsing UNSV DB with MCBs.
S&F MCCB 125A 4Pole 16KA 415 Volt with fixed magnetic and fixed thermal setting complete.
M&L for sheet steel box fabricated out of 2 mm thick CRCA sheet powder coated of size 60x60x25 cm duly compartmentalized suitable to accommodate 4 Nos Energy Meter independently. each compartment shall be provided with suitable door and 2 Nos fancy lock, complete, all as specified and directed by Engr-In-Charge incl taking out existing wooden meter box.
M&L for sub main wiring with two single core FRLS PVC insulated unsheathed 1100 volts grade cable with stranded copper conductor of size 6 Sq mm drawing through and including concealed rigid non metallic PVC conduit medium grade ISI marked 20 mm dia including one single core FRLS PVC insulated unsheathed 1100 volts grade cable with stranded copper conductor of size 6 sq mm as earth continuity conductor connected to commen earth and earth dolly complete incl taking out existing UNSV service connections.
M&L for earthing complete for bldg with galvanized mild steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 meters below ground level) with top edge of earth plate not less than 1.5 meters below ground level connected to galvanized earth wire 4.00 mm dia by means of nuts, bolts, thimbles, chuck nuts, washers of GI or steel, PCC (concrete chamber of size 300 mm x 300 mm x 300 mm inside dimension) shall be PCC 1:3:6 type C-1 using 20mm graded stone aggregate with fair finish , internal surface of concrete chamber shall be given 15mm thick plaster in CM 1:4, funnel with wire mesh of 22 gauge, 80 mm thick PCC pit cover 320 mm x 320 mm of RCC 1:2:4 type B-1 using 20 mm graded stone aggregate reinforced with XPM, JALLI pit shall be filled with charcoal dust and common salt all as shown in electrical plate No 3 of MES SSR Part-I (2009) as specified including provision of 15mm dia medium grade GI pipe for earth wire protection and 20 mm dia for watering complete , all excavation and earth work & connecting the earthing to an earthing test point / main switch board as specified and testing on completion complete.
M/S Shankardass Devidass
M/S ROMESH KUMAR SHAN
BHARTI CONSTRUCTIONS
R.K. Works
ASHWANI KUMAR KHAJURIA AND SONS
M/S CJ CONSTRUCTIONS
SUNIL AND CO
m/s GAUTAM CONSTRUCTION CO
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .