GE (N) P/TOKEN- 53 OF 2024-2025 PROVN OF STEEL RAILING ADJACENT TO MAITRI COMPLEX, REPLAC OF SECURITY MAIN GATE PILLARS AT 20 QG RENO OF BATHROOM SERVANT ROOM OF HOUSE NO 7 PG ROAD APPT HOUSE OF BRIG ADM OF HQ SC UNDER GE(NORTH) PUNE

Amount

Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, coping etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard dence soil all as specified and directed.

Removing excavated soil exc. 50m and depositing where directed at a level not exc. 1.5 m complete all as specified and directed.

M & L for Hardcore of broken stones or boulders of guage not exc 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface

M & L for cement concrete 1:3:6, type C2 (using 40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

M & L for cement concrete Type B0 1:2:4 (20 mm graded aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles andthroating, as directed

M&L for Pre-cast cement concrete block masonry using solid blocks of PCC 1:3:6, type C-1, exc 10cm in width and setting in CM 1:6 complete all as speified and directed.

M&L for 15mm thick plastering in CM 1:4 on brick or concrete wall surfaces etc finished even and fair all as specified and directed.

M&L for preparation of new plastered surfaces and applying two coats of weather proof exterior emulsion paint ('APEX' brand of Asian or equivalent brand of Berger/Shalimar) over one coat of primer to wall complete all as specified and as directed by Engineer-in-charge.

M&L for preparation of old plastered surfaces and applying one coats of weather proof exterior emulsion paint ('APEX' brand of Asian or equivalent brand of Berger/Shalimar) over one coat of primer to wall complete all as specified and as directed by Engineer-in-charge.

S&F Cast iron grills/gratings of size and shape as approved by GE including welding to steel frames, posts etc complete all as specified and directed.

S&F steel Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar work complete all as directed.

M&L for preparation of new steel surfaces of any description and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engr-in-Charge

M&L for two coats of Gold coloured anti rust synthetic enamel paint Rust shield Asian Paints (Apcolite) or equivallent over a coat of red oxide primer on new steel surfaces including preparation of surfaces all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for

S & F 3 mm thick Colour fibre glass reinforced translucent designed sheet fixed with coach screw and washer to iron gate etc

M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms over and including 15 mm thick screed bed in CM 1:6 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as directed

Labour only for full round moulding to 18 to 20mm thick granite slab complete all as directed.

Dismantling timber scantlings 40 sq. cm and over in section, in any position complete all as specified and as directed.

Supply and fix rolled mild steel section Fe 410-W(Gde-E-250) quality A as in main and cross beams, hip and jack rafters, purlins connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates all as specified and directed.

Dismantling of asbestos cement (corrugated,semi corrugated, etc.) sheets in roof coverings

S&F for 0.50mm thick pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws with two corrugation side lap complete all as specified and as directed.

M&L for preparation of new steel or iron surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and as directed.

M&L for 100 mm thick PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) Cement concrete as sub base in floors mixing with WPC @ 2% by weight of cement complete all as specified and as directed

Supply only Liquid water proofing compound

M & L for preparation of surfaces of walls and appying two coats of chemical water proofing treatment on wall such as , CEMISTIK PU 50 heavy Duty warerproofing coating or equivalent complete all as per manufacturer instruction as directed.

M&L designer glass mosaic tiles area of each tile n. exc. 0.11 sqm in wall and floor of swimming poll/fountain etc. set and jointed with 1st quality water resistance adesive in Square /rectangular/ circular /oval shape incl dismantling of existing tiles complete all as specified and directed..

M&L coloured vitrified double charged tiles 8-10mm thick (square/ rectangular) area of each tile n.exc 0.36 sqm as in floor laid in any pattern etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 15mm thick screed bed or bedding layer in CM 1:4 of any description complete all as specified and as directed Note:- Design/pattern of tiles as approved by Engr-in-charge

-Ditto- all as per item No. 29 item above but skitings/dado on vertical surfaces including 10mm thick backing coat f cement plaster in CM 1:4 complete all as specified and as directed.

M&L for 25mm thick 2nd Class Hardwood planks (Boarding) of required size or as approved size, Cross sectional area not less than 50 Sqcm in flooring with arrangement of tongue and groove joint and applying two coats of melamine filler complete till fine glossy finish is obtained complete as per manufacturers instruction.

Dismantling & Refixing of 25mm thick 2nd Class Hardwood planks (Boarding) of required size or as approved size, Cross sectional area not less than 50 Sqcm in flooring with arrangement of tongue and groove joint and applying two coats of melamine filler complete till fine glossy finish is obtained complete as per manufacturers instruction.

M & L for 75 mm thick PCC (1:4:8) type D-2 using 40mm graded stone aggregate as sub base, complete all as specified and as directed

M&L for machine pressed precast cement concrete coloured interlocking paver blocks, glossy rubber moulded, of triangular / Zigzag / Haxagone/any shape/design and size as approved, 60 mm thick, conforming to IS 15658-2006, M-35 with grey cement and pigments grade in floor/ paths/ pavement laid over and including sand cushioning laid dry to the profile including filling the joints with sand complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises complete all as specified and as directed.

M&L non-skid coloured mate finish full body tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.08sqm but not exceeding 0.36 sqm as in floor etc set and jointed in neat cement slurry and pinted in white or coloured cement to match the tiles including 20mm thick screed bed or bedding layer in CM 1:6 complete all as specified.

M&L glazed ceramic coloured tiles of size 450 x 300 x 7mm thick, on vertical surfaces of walls such as skirting , dado etc. set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in cement mortar 1:3 complete, all as specified.

M&L coloured Vitrified Double Charge tiles 8 to 10mm thick (square/rectangular) area of each tile exceeding 0.18sqm but not exceeding 0.36sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 15mm thick screed bed or bedding layer in in CM (1:6) complete all as specified.

M&L for applying two coats of Oil bound distemper at old wall surface over a coat of alkali resistant primer along 1.5 mm thick wall putty complete all as specified and directed.

M&L for preparation of wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint over one coat of pink primer complete all as specified and as directed.

Material and labour for 8 to 10mm thick PVC prelaminated Gypsum board false ceiling board on and including GI powder coated grid work of size 600 mm x 600 mm with using 32.0 mm x 20 mm x 1.5 mm thick main tee, 23.5 mm x 23.5 mm x 1.28 mm cross tee and 25 mm x 25 mm x 1.5 mm angle fixed to wall for false ceiling including necessary supporting hanger with 3.0 mm dia GI wire and 'J' bolts washer nuts for securing frame work to ceiling, suspended @ 120 cm C/C both ways, size of grid shall be 605 mm x 605 mm complete all as specified and as directed. Make :- Armstrong, Diaken, New Age, Gyprock as approved by GE.

M&L Cutting chases, pinning in, making good to facings where required in stone walls and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelve, lintels etc and cutting chases for concealed water tubing or concealed conduct wiring etc and making good cutting n exc 10 cm girth complete all as specified and directed by Engr-in-Charge.

Taking up or down 15 mm bore steel tubing with all fittings and connections complete all as directed.

Supply and fix 15 mm bore GI tubing 'medium grade' galvanised, with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and as directed.

Taking up or down 20 mm bore steel tubing with all fittings and connections including cleaning for refixing or removal to store complete all as directed.

Supply and fix for 20 mm bore GI tubing 'medium grade' galvanised, with all fittings and fixed to walls concealed or protruded and ceiling or laid in floors complete all as specified and as directed.

Supply and fix SS square grating 5"x5"mm size and thickness 0.8 -1mm of grade SS 304 with/without hole complete all as specified.

Supply and fix cast iron nahani/floor trap, 75mm dia of outlet, with grating including joining to waste pipe fixed in PCC (1:2:4) type B-1 (using 20mm graded broken stone aggregates) complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from frame) area n exc.1.5 sqm each complete all as directed

Supply and fix aluminium powder coated louvered ventilator with provision of space for exhaust fan using 'Jindal' aluminium section - 20604 or equivalent make as specified including glass 3mm thick ordinary quality, frosted and stainless steel wire mesh 0.36mm dia wire an d1.40mm qperture etc complete all as specified and directed.

Supply and fix aluminium powder coated three track sliding window with two glazed shutters, one shutter with and including 4mm thick ordinary quality float glass and one shutter including stainless steel wire mesh 0.36 mm dia wire and 1.40mm aperture including good quality of bearing, handle, locks, PVC rubber lining of transparent colour etc. complete all as specified and as directed. Catalouge numbers of Jindal company or equivalent make sections : Three track bottom – 20957, Three track top/vertical – 20958,Handle – 20606, Interlocking – 20605, Top and bottom – 20604.

S&F in repairs hand shower chromium plated (health faucet) 15 mm bore, (ABS body) with 8mm dia. 1.20 metre long spirochrome flexible tube & wall hook, Cat No. F8030401AB of make Cera or equivalent of make as per Appx 'A' as approved by GE. complete all as specified and as directed.

S&F chromium plated shower rose 115mm size square (without arm) with swivel joints including fixing arm/ pipe all as specified. Make Johnson Cat part No: S0006C or equivalent make as per Appex 'A' as approved by GE.

S&F cast copper alloy CP Shower arm square 230mm long with flange complete all as specified and directed by Engr-in-Charge . Make Johnson cat part No: S0001C1 or equivalent make as per Appx "A' as approved by GE.

S&F angle cock with flange chromium plated cast copper alloy screwed down complete all as specified. Make: Johnson Eco Cat part No: T3910C or of equivalent make as per Appx 'A' as approved by GE.

S&F chromium plated toilet Rol holder ,Cat No. ACN-1151N of make Jaquar ‘‘CONTINENTAL'S Series or equivalent of make as per Appx 'A' as approved by GE all as specified and as directed.

Supply and fix 10 litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including brackets, 32mm dia PVC flush pipe and connections to pipes, making good the disturbed surfaces make cera complete all as specified and as directed.

Supply and fix 15mm dia PVC connection 450mm long including PTMT nuts etc complete all as specified and as directed

S&F chromium plated two way bib cock with wall flange 15mm dia Cat No. LYR-38041 of make Jaquar ‘Lyric' series or equivalent of make as per Appx 'A' as approved by GE all as specified and as directed.

S&F Center hole basin mixer brass chromium plated quarter turn and wall Flanges suitable for fixing with GI pipes 15mm dia complete all as specified and as directed. Make: Cera Cat Part No F1003461 TITANIUM SERIES or equivalent of make as per Appx 'A' as approved by GE.

S&F chromium plated single towel rail 600mm long including built in side brackets ,Cat No. ACN-1111SM of make Jaquar ‘CONTINENTAL'S Series or equivalent of make as per Appx 'A' as approved by GE all as specified and as directed.

S&F chromium plated toilet Rol holder ,Cat No. ACN-1151N of make Jaquar ‘‘CONTINENTAL'S Series or equivalent of make as per Appx 'A' as approved by GE all as specified and as directed.

S&F chromium plated soap dish ,Cat No. AcN-1121N of make Jaquar ‘'S Series or equivalent of make as per Appx 'A' as approved by GE all as specified and as directed.

S&F chromium plated towel ring square with round flange, Cat No. AQN-7721 of make Jaquar ‘CONTINENTAL'S Series or equivalent of make as per Appx 'A' as approved by GE all as specified and as directed.

S&F chromium plated bib cock with wall flange quarter turn complete all as specified and as directed. Cat No. FUS-29037 of make Jaquar ‘Fusion' series or equivalent of make as per Appx 'A' as approved by GE.

S&F chromium plated wall mixer 3-in-1 system with provision for both hand shower and overhead shower complete with wall flange with 115mm long bend pipe, connecting legs ,Cat No. QQT-7281 of make Jaquar ‘QUEEN'S Series or equivalent of make as per Appx 'A' as approved by GE all as specified and as directed.

S&F in repairs hand shower chromium plated (health faucet) 15 mm bore, (ABS body) with 8mm dia. 1.20 metre long spirochrome flexible tube & wall hook, Cat No. F8030401AB of make Cera or equivalent of make as per Appx 'A' as approved by GE. complete all as specified and as directed.

S&F chromium plated towel rack, 600mm long with lower hangers,Cat No. ACN-1181S of make Jaquar ‘Continental's Series or equivalent of make as per Appx 'A' as approved by GE all as specified and as directed.

S&F corner glass shelf of size 300mm dia and 8mm thick with chromium plated railing, fixed with and including chromium plated bracket complete all as specified and as directed.

S&F glass shelf 450mm x 150 mm x 8mm thick with chromium plated railing fixed with and including chromium plated brackets complete aii as specified and as directed.

Material and labour for machine cut cudappah stone slab 20-25 mm thick as in lintels, shelves, vertical supports, fixed with neat cement slurry or arldite, including rubbing and polishing complete all as specified and as directed

Material and labour for 20mm thick granite (of any type) work ( table rubbed and polished) in steps , jambs. pillars, window cills, cooking platforms and like in cement mortar (1:4), pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

Labour only for full round moulding to 18 to 20mm thick granite slab complete all as directed.

S&F in repairs vitreous china counter Top wash hand basin, Ivory, size 560 mm x 470 mm x 190mm flat back excluding taps but including CI brackets, chromium plated brass waste coupling, chain and plug, waste fitting including waste pipe, union and PVC waste pipe 32mm dia, of required length, cutting for and pinning in ends of bracket or errecting stand complete all as specified and as directed. Make: Cera Model: OVAL Cat Part No –S2030104 equivalent make as per Appx 'A' as approved by GE.

S&F for vitreous china European type wash down water closet pan, (Pedestal pattern), white including plastic seat cover white closed pattern with flat bottom and cover with mild steel chromium plated hinging device and fixing bolts, 'P' or 'S' trap, necessary inlet and outlet connections including making good complete all as specified and as directed.

Note : 1. Rerformance security:- Refer Condition 22 of Special Conditions. 2. Quoted Contract Sum shall be arrived at after deducting the amount of Credit Schedule (refer Schedule of Credit in pdf form for quantity, rate and amount etc.) for old unserviceable materials retrieved from site.

Gauri Associates (BID ID -3310987)

N AND G CONSTRUCTION (BID ID -3317667)

M/S - R K CONSTRUCTIONS (BID ID -3317942)

NARESH KUMAR KHARA (BID ID -3317991)