Work of erection of 100KVA Distribution Transfomer Centre alongwith 3 phase 5 wire LT line inorder to release 1 no. of LTD Service connection to Shri. Ankush Arjun Gawas at survey No. 87/0, Nadora, Bardez-Goa for a total load of 6940W under the juris

Amount

COST OF MATERIAL

11 KV, 200A Horn gap fuse unit (Set of three) shall be as per enclosed drg No. CEE/E-786. Revision 3 and detailed specifications enclosed herewith.

9KV, 5KA nominal discharge current metal oxide gapless distribution class Lightning arrestor conforming to IEC-600994-4 and IS: 3070 part 3 1993 as amended upto date.

HDGI structure material. Consisting of Channels, angles, clamps, etc as per requirement of work, NIT, drawings, etc.

Turnbuckle with eye bolt for LT/11KV stay set

HDGI Top Insulator fitting Cross arm ISMC channel 75 x 40 mm, 0.7 mtr with nut bolts long for 11 mts long RCC pole

HDG cut point crosss arm channel ISMC 75 X40 X 6mm of 1.3 mts long with clamps and nuts & bolts for 11 mts RCC pole

11KV Guard Cross arm 1.5Mts long with clamps & nut bolt for 11mtr RCC pole

11 KV Disc Insulators 70 KN with metal parts 3 bolted type

11 KV Pin Insulator

LT shackle Insulator

Earthing complete with chamber as per drg/ No. CEE/E-830. Each earthing should consist as follows a) 40 mm. Dia 2.5 mtr long, class B GI pipe 1 No. b)HDGI nut bolts, clamps 1 set, c)Brick masonary-0.108 Cu.mts d) PVC pipe 50mm dia- 0.2mtr e) Salt-20 Kgs f) Charcoal-20 Kgs g) Excavation-0.864 Cu. Mtr h) refilling-0.74 Cu.mtr as per drg. No.CEE/E-830.

XPLE insulated single core unarmoured cable 50 mm2 for DP earthing.

AA"ANT" conductor

AA"GNAT" conductor

MS Distribution box as per drg No. CEE/E-689 Revision No. 3 along with MCCB 400 A, Bus bar made out of Aluminium strips 40 x 10 mm, kit kat fuses for 4 feeder arrangement

XLPE 1.1KV Armored single core unarmoured cable 300 mm²

XLPE 1.1KV Armored single core unarmoured cable 120 mm²

Distribution Transformer Metering unit as per T.S.

Enamelled danger boards 11000 Volts ,250mm x 200mmm as per drg no. CEE/E-490

Anti climbing device alongwith suitable two stay clamps & two pairs of H.D.G.I nuts bolts as per drg No. CEE/E-478

Aluminium crimping Lugs 300 Sq.mm.

Cement concreting 1 : 2:4

FRP Fencing complete with Gate as per specification for Distribution Transformer (Size 4Mx3Mx2M) with Concreting for FRP Fencing supports with plinth (0.3x0.3x0.5) Cu.m. x 12 nos. Each ratio 1:3:6

COST OF ERECTION

RCC pole 11 mtr long

RCC pole 9 mtr long

100 KVA 11KV/.43 KV Distribution transfromers

11 KV rated voltange GOAB switches 200 A

11 KV, 200 A Horn gap fuse unit (Set of three)

9 KV, 5 KA Lightning arrestor.

HDGI structure material. Consisting of Channels, angles, clamps, etc as per requirement of work, NIT, drawings, etc.

LT/11KV Stay set complete for 11Mts long RCC pole with Stay rod with plate , Stay wire 7/10SWG,Break insulator 8KV, Stay clamps ; G.I. Nuts & Bolts

Turnbuckle with eye bolt for LT/11KV stay set

LT/11KV Stay set complete for 9Mts long RCC pole with Stay rod with plate , Stay wire 7/10SWG,Break insulator 8KV, Stay clamps ; G.I. Nuts & Bolts

HDGI Top Insulator fitting Cross arm ISMC channel 75 x 40 mm, 0.7 mtr with nut bolts long for 11 mts long RCC pole

HDG 11 KV 'V' Shape cross arm of channel ISMC 75 x 40 x 7.3 mm. with HDG Clamp & HDG nut bolts etc. for 11 Mtr. long RCC Pole as pet drg no. CEE/E - 408-R1

HDG cut point crosss arm channel ISMC 75 X40 X 6mm of 1.3 mts long with clamps and nuts & bolts for 11 mts RCC pole

11KV Guard Cross arm 1.5Mts long with clamps & nut bolt for 11mtr RCC pole

HDG L.T. 4 pin cross arm Channel type as above with HDG clamps & HDG nut bolts etc for 9mts long RCC pole as per drg No.CEE/E-491 and drg no. CEE/E-524

HDG L.T. 2 pin cross arm Channel type as above with HDG clamps & HDG nut bolts etc for 9 mts long RCC pole as per drg No.CEE/E-491 and drg no. CEE/E-524

11 KV Disc Insulators 70 KN with metal parts 3 bolted type

11 KV Pin Insulator

GI pin for 11 KV pin insulators

LT shackle Insulator

Metal parts for LT Shackle insulator

ACSR WEASEL Conductor

Earthing complete with chamber as per drg/ No. CEE/E-830. Each earthing should consist as follows a) 40 mm. Dia 2.5 mtr long, class B GI pipe 1 No. b)HDGI nut bolts, clamps 1 set, c)Brick masonary-0.108 Cu.mts d) PVC pipe 50mm dia- 0.2mtr e) Salt-20 Kgs f) Charcoal-20 Kgs g) Excavation-0.864 Cu. Mtr h) refilling-0.74 Cu.mtr as per drg. No.CEE/E-830.

XPLE insulated single core unarmoured cable 50 mm2 for DP earthing.

AA"ANT" conductor

AA"GNAT" conductor

MS Distribution box as per drg No. CEE/E-689 Revision No. 3 along with MCCB 400 A, Bus bar made out of Aluminium strips 40 x 10 mm, kit kat fuses for 4 feeder arrangement

XLPE 1.1KV Armored single core unarmoured cable 300 mm²

XLPE 1.1KV Armored single core unarmoured cable 120 mm²

Distribution Transformer Metering unit with DLMS/COSEM protocol energy meter with modem

Enamelled danger boards 11000 Volts ,250mm x 200mmm as per drg no. CEE/E-490

Anti climbing device alongwith suitable two stay clamps & two pairs of H.D.G.I nuts bolts as per drg No. CEE/E-478

Aluminium crimping Lugs 300 Sq.mm.

Aluminium crimping Lugs 120 Sq.mm.

Aluminium crimping Lugs 50 Sq.mm.

FRP Fencing complete with Gate as per specification for Distribution Transformer (Size 4Mx3Mx2M) with Concreting for FRP Fencing supports with plinth (0.3x0.3x0.5) Cu.m. x 12 nos. Each ratio 1:3:6

Painting of Pole Numbers (including paint, etc charges)

Deepti Enterprises