Jhelum River Front Development from Amira kadal to Chattabal Weir including Beautification Accesses,Illumination,Public Amenties,Social Spaces and Ghats(Phase 2nd )

Amount

Excavation in dumped stones or mulba including stacking of serviceable and unserviceable material separately and disposal of unserviceable material lead upto 50 m and lift upto 1.5 m, disposed material to be neatly dressed.

Removal of unhygienic materials (so classified by the site engineer) from designated sites and its disposal as per directions, all inclusive.

Silt clearance from canals , inclusive of intial lead and lift (50 mtr and 1.5 mtr respectively) Dry silt

Wet silt

Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil.

Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as10 sqm on plan including disposal of excavated earth, lead upto 50 meter and lift upto 1.5m, as directed by Engineer-in-Charge. All kinds of soil

Extra for every additional lift of 1.5 m or part thereof in excavation/banking excavated or stacked material : All kinds of soil Ist lift.

2nd lift

Clearing of grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared

Demolishing cement conc. Manually/by mechanical means incl. disposal of material within 50 mtrs. lead as per direction of Engineer-i-charge.

Dismantling of existing paver block tiles etc. by removing grass, Kerbs stones, stone masonary etc. if any.

Dismantling dry stone pitching. in aprons, drains etc. incl. stacking of serviceable material and disposal of unserviceable material, stacking/disposal lead upto 100 mtrs.

Dismantling dressed stone work Ashlar face stone work, marble work or precast concrete work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: In cement mortar

Removing mortor from and cleaning stones and conc. Articles net quantity of stacks of cleaned materials will be measured in cement mortor.

Chipping of unsound /weak conc. Material from slabs, beams, columns etc. with manual chisel and/or by standard power driven percussion type or of approved make incl. tapering of all edges, making square shoulders of cavities incl. cleaning the exposed conc. surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-in-charge (25 mm avg. thickness).

Dumping stone soiling excl. cost of stones in horizontal on level.

Supply of stone soiling

Close timbering in trenches including strutting, shoring and packing cavities (wherever required) complete. (Measurements to be taken of the face area timbered). Depth exceeding 3 m but not exceeding 4.5 m.

Depth exceeding 1.5 m but not exceeding 3 m.

Close timbering over areas including strutting, shoring and packing cavities (wherever required) etc. complete. (Measurements to be taken of the face area timbered). Depth exceeding 3 m but not exceeding 4.50 m

Providing and laying in position cement conc. Of specified grade excl. the cost of centering and shuttering all work upto plinth level 1:4:8 ( 1 cement :4 coarse sand : 8 graded stone agg. 40 mm nominal size )..

Providing and laying in position cement conc. of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level 1:3:6 (1 cement 3 coarse sand :6 graded stone agg: 20 mm nominal size) .

Providing and laying in position cement conc. of specified grade including curing but excluding the cost of centering and shuttering. All work upto plinth level 1:2:4 (1 cement 2 coarse sand:4 graded stone agg: 20 mm nominal size) .

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1.5:3 ( 1 cement: 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Centering & shuttering incl. strutting, propping etc. & removal of form work for:- Foundations, footings bases of columns for mass conc.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.

Stone work in super structure upto floor five level in cement mortar 1:6 ( 1 cement :6 coarse sand) including pointing with cement mortar 1:2 ( 1 white cement: 2 stone dust) with an admixture of pigment matching the stone shade and curing complete incl. cost of stones. In Ashlar punched (ordinary) one face punched. White sand stone.

Stone work in super structure upto floor five level in cement mortar 1:6 ( 1 cement :6 coarse sand) including pointing with cement mortar 1:2 ( 1 white cement: 2 stone dust) with an admixture of pigment matching the stone shade and curing complete incl. cost of stones. In Ashlar punched (ordinary) one face punched. White sand stone. Excluding cost of stones.

Stone work in super structure upto floor five level in cement mortar 1:6 ( 1 cement :6 coarse sand) including pointing with cement mortar 1:2 ( 1 white cement: 2 stone dust) with an admixture of pigment matching the stone shade and curing complete: White sand stone in plain Ashlar one face dresshed

Stone work in super structure upto floor five level in cement mortar 1:6 ( 1 cement :6 coarse sand) including pointing with cement mortar 1:2 ( 1 white cement: 2 stone dust) with an admixture of pigment matching the stone shade and curing complete incl. cost of stones. In Ashlar punched (ordinary) White sand stone (both face punched).

Stone work in super structure upto floor five level in cement mortar 1:6 ( 1 cement :6 coarse sand) including pointing with cement mortar 1:2 ( 1 white cement: 2 stone dust) with an admixture of pigment matching the stone shade and curing complete incl. cost of stones. In Ashlar punched (ordinary) White sand stone (both face punched). Excluding cost of stones.

Raking out joints of stone masonary surface to the required width and depth, with due care and precaution by mechanical/manual means incl. preparing and cleaning the surface for re-pointing/refilling of joints, incl. dumping of rubbish to the dumping ground within 50 mtrs. lead.

Dry stone pitching (any thickness) excluding cost of stones. on slopes

Supply of stones for pitching 15x225 cm..

Grouting of stone pitching using M-10 nominal mix concrete (max. size of aggregates; 20mm nominal) @ 6.00 cum per 100 sq m on horizontal/side slopes; complete including curing.

Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with: Cement mortar 1:6 (1 Cement : 6 coarse sand).

Dry random rubble masonry with hard stone in foundation and plinth: With bond stone.

Random Rubble masonry with hard stone in superstructure above plinth level and upto floor five level, including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) and curing complete at window sills, ceiling level and the like: Cement mortar 1:6 (1 Cement : 6 coarse sand)

Dumping stones excluding cost of stones in horizontal on level.

Supply of stone boulder (quarry) nominal size 225 mm.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.

Pointing on stone work with cement mortar 1 : 3 (1 cement : 3 fine sand) Flush/Ruled Pointing

Ruled/flush pointing on red sand stone masonary surface with lime, surkhi and marble dust mortor in the ratio 1:1.5:1.2 (one lime 1.5 surkhi) (50% red and 50% light yellow surkhi) ½ marble dust (the rate is inclusive of all materials and labours involved except scaffolding)

Providing and laying Devri stone tiles of 25mm thickness laid on 20mm thick cement mortar 1:4 mix including carriage (complete job) .

Providing and laying chisel dressed Devri Stone of size 300x200 mm face with 150 mm depth in cement mortar 1: 6 (1 cement : 6 coarse sand) upto plinth level including curing. One face dressed fine chisel dressed

Providing hoisting and fixing trusses/purlins /rafters/posts/ post-plates/ Columns / Railing /False frame work or like components including cost of screws etc. complete

First Class Budloo/Fir wood

II class Kail wood

II class Deodar wood

Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal / vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Providing and fixing door lock with handle of approved make as per incharge engineer.

Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating notless than grade AC 10 as per IS : 1868) transparent or dyed to required colour orshade with necessary screws etc. complete :nless Steel vertical Door Lock including fixing. 250 X 10mm

Providing and fixing ISI marked aluminum butt hinges ISI marked anodized (anodic coating not less than gradeAC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc.complete : 100 X 75 x4 mm.

Providing and fixing 20mm thick wooden planks ceiling (frame work for base to be paid for separately) with M.S. screws in budloo /Fir wood.

Providing and fixing ISI marked oxidized M.S. handles conforming to IS : 4992 with necessary screws etc. complete : 100 mm

Brick on edge flooring in required pattern with common burnt clay nonmodular bricks of class designation 7.5 on a bed of 12 mm cement mortar, including filling the joints with same mortar and curing complete1:4 ( 1cement : 4 coarse sand)

Providing and laying mat finished vertified tile of specified size having water absorption less than 0.5% and conforming to IS 15622 of approved make in all colors and shades in outdoor floors such as footpath, courtyard and multi models etc. laid on 20 mm thick base of cement mortar 1:4 in all shapes and pattern incl. grouting. The joints with white cement mixed with matching pigments etc. complete as direction of site incharge (400x400x16) mm

Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of engineer-in-Charge conforming ti IS: 15622 of approved make in all.

Providing and fixing of outdoor anti skid 10 mm thk rubber mat with necessary adhesive for permanent installation of approved make incl all carriages etc .complete job as per direction of authority

12 mm cement plaster of mix 1:4 ( 1 cement :4 coarse sand)

Providing and laying non pressure NP2 class (light duty) R.C.C Spun Pipes with collars jointed with stiff mixture of cement mortor in the proportion of 1:2 ( 1 cement 2 fine sand ) incl. testing of joints etc. complete dia 300 mm dia.

Applying one coat of water thinnable cement prime of approved brand and manufacture on wall surface.

Finishing walls acrylic smooth exterior paint of required shade on new work (two or more coats applied @ 1.67 ltr 10 sqm over and incl. priming coat of exterior primer applied @ 2.20 kg /10sqm).

Providing and laying of 100 mm sand & good earth mixture in upgradation of slopes including Levelling,ramming,watering including all carriages as per direction of incharge enginee Complete Job.

Supply of Sand.

Supply of Earth

Supplying and stacking of Good Earth at site including royalty, (earth measured in stacks will be reduced by 20% for payment

Spreading of sludge, dump manure or/and good earth in required thickness as per directions of officer in-charge (cost of sludge, dump manure or/and good earth to be paid separately)

Turfing of slopes with dhoob grass.

Flooring with Cobble stone of approx. Size 125x125x75 mm (thick)laid on 25 mm average thick cement mortar 1:3 ( 1 cement : 3 Coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the stone, laid in approved pattern complete in all respect as per direction of Engineer-in-charge

Providing and Fixing of Heavy duty 304 S.S. Mooring Anchor block 100 mm dia with slide anchor knotless anchor system for Boats with easy with quick release system incl foundation , earthwork , concrete complete Job . ( Excluding SS Rope)

Open gym with atleast provision of

A).Providing and fixing of modcon double standing twisiter of height 1500mm in Mild steel with 100 mm powder coated and paint finish of approved make to be approved by authority including RCC foundation and other items incl all carriages etc. complete job.B).Providing and fixing of Air walker double of dimensions 1500x600x1600 mm including RCC Foundation as Directed by Engineer incharge and as per specifications .All joints of pipe are robotically welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint is applied at all the welding points prior to finishing. Equipment made to meet EN16630 specifications-European standard for permanently installed outdoor fitness equipment. Epoxy coating of at least 100 microns to prevent any damage from extreme weather conditions. Thick galvanized main post-of:114 mm diameter. The thickness of pipes varies between 3.5 mm to 7.5 mm. Self-lubricating German bearing for maintenance-free usage. Reinforced foot pedals for extended life. J hook system with 18 mm thickness used for grouting for higher stability and ease of installation. Non fading Virgin LLDPE makes all plastic components sun fade resistant. All open ends of the pipe either sealed in or closed by GI/LLDPE caps for user safety. High tensile steel with galvanized nut bolts are used for assembly. Self-Explanatory stainless steel label fixed on equipment for ease of use. Equipped with a range of motion internal limiters.C).Providing and fixing of Triple Twister (Three sitting) of dimensions 1100x1100x1375 mm including RCC Foundation as Directed by Engineer incharge and as per specifications .All joints of pipe are robotically welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint is applied at all the welding points prior to finishing. Equipment made to meet EN16630 specifications-European standard for permanently installed outdoor fitness equipment. Epoxy coating of at least 100 microns to prevent any damage from extreme weather conditions. Thick galvanized main post-of:114 mm diameter. The thickness of pipes varies between 3.5 mm to 7.5 mm. Self-lubricating German bearing for maintenance-free usage. Reinforced foot pedals for extended life. J hook system with 18 mm thickness used for grouting for higher stability and ease of installation. Non fading Virgin LLDPE makes all plastic components sun fade resistant. All open ends of the pipe either sealed in or closed by GI/LLDPE caps for user safety. High tensile steel with galvanized nut bolts are used for assembly. Self-Explanatory stainless steel label fixed on equipment for ease of use. Equipped with a range of motion internal limiters.d) Providing and fixing of outdoor double air swing fitness equipment in mild steel of size 1150x900x1250mm with paint and powder coated finish including Rcc foundation and all cariages upto site as per authority etc. complete job.e) roviding and fixing of outdoor G.I Double sit up board of size 1524 x 1524 x 1220 mm with paint and powder coated finish including Rcc foundation and all cariages upto site as per authority etc. complete job

Providing and fixing of bicycle stand frame of size 4mx1.8m in Mild steel hollow tubes, angles built up section to accommodate minimum 5 bicycles, including cement concrete of 1:2:4 in foundation as per requirement at site, design to be approved by authority including all carriages etc .complete job

Providing,fixing and installation of electric motorised chair working on single phase 220V to 230V AC , 50hz and 24V, DC battery driven , rack and pinion drive mechanism on rail mount type with max rail length of 50 metre including all fixing arrngements , with load capacity upto 130 kg and lifting height upto 25m made of high quality robust ABS plastic material, with automatic folding footrest, side arm rest,retractable seat belt of swivel seat type with stair angle upto 60 degree of approved manufacture or ISI certified, as per direction of authority including all carriages and extra charges etc. upto site.(Design to be approved by authority

Providing,fixing and installation of prefab portable bio toilet container of size (12x6x7) feet in 40 mm thk polyurethane foam pannels(PUF) of main walls, partition walls and roof having Puff insulated pannels with colour coated on top and bottom with plain prepainted GI sheet for making cabin water proof,including floor of MS tube frame having 5mm chequered alumunium pannels male(6x6) and female(6x6) with pre painted G.I doors of appropriate size and neccesary fitting in stainless steel, with ventilations and other items etc. as approved by authority complete job. with 2 no ceramic european W.C and washbasin for each cabin including neccesary plumbing , C.P fittings etc.with bio waste tank of 1000 litres each for male and female, including neccessary electrical fittings , exhaust fan,light point, 5 amp sockets, etc and other items required as per authority. including neccessasy M20 grade cement concrete in foundation with required excavation etc complete job including all charges and carriages upto site as per direction of incharge engineer. (This item shall includes the water and electrical supply charges )

P/F double scaffolding system ( cup lock type) on the exterior side of building/structure, upto 25 mtrs. height above ground level, incl. additional rows of scaffolding in stepped manner as per requirement of site, made with 40 mm dia M.S tube, placed 1.5 mtr c/c horizontal and vertical tubes joint with cup and lock system with Ms tube, challis Ms clamps and stairs case system in the scaffolding for working platform etc. and. maintaining it in a serviceable condition of execution of work of cleaning and or pointing and/or applying chemical and removing it there after the scaffolding system shall be stiffened with bracings, runners, connecting with the building etc. where ever required if feasible for inspection of work at required location with essential safety features for the work men etc. complete as per directions and approved of Engineer-in-charge .

Pre-casting & Placing in position 125 mm dia Bollards 600 mm high of required shape including providing M.S. Pipe Sleeve 50 mm dia 300 mm long in the Bollard and M.S. pipe 40mm dia and 450mm long with 150x150x6 mm M.S. plate welded at bottom and embeded 150 mm in cement concrete 1: 3: 6 (1 cement:3 coarse sand:6 graded stone aggregate 20 mm nominal size) including necessary excavation of size 250x250x450mm deep for the same in bitumen/concrete pavement at specified spacin

HORTICULTURE

Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

Providind,fixing , testing and commisioning of drinking water point comprising of 150mm Cement concrte foundation in 1:2:4 laid over 200mm stone soling, with 230 mm thk side walls in common burnt clay non modular bricks of class designation 7.5 brick work on three sides in 1:4 cement mortar with 12mm thk cement plaster 1:4 with 20 mm granite on top and sides laid on RCC slab with reinforcement with top size 750mmx1500mm upto 1m height including Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required 510x1040mm bowl depth 250mm with heavy duty C.P bass tap with neccessary fittings and 15mm dia G I connection pipes upto 60 m length laid properly in trenches with fittings complete job. Design of water point to be approved by authority

Providing and fixing of S.S Double Drum Dustbins units of aprroved Standard, make and size mounted on S.S Stand per unit Complete Job.with segregation signs.

Providing and fixing of (3) three seater S.S bench of approved brand and manufacture, with 50mm thk wooden seat of 2nd class deodar wood to be anchored permanently with cement concrete of 1:2:4 mix bed block complete job

Providing and fixing of drain cover in structural steel work in built up sections, with angles of 40x40x5mm, 5mm mild steel sheet, ms hinges HD, handles,ms base frame of angles of required size and anchors including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.welded. Design to be approved by the authority

SIGNAGES

Providng and fixing retro reflective sign boards for directional signage/orientation boards of size upto 2.5 sqm made up of 2mm thick aluminum sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type-IV of ASTM-D-4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC : 67-2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same withsuitable sized aluminum alloy rivets @ 20cm c/c to back support frame of Stainless steel hollow square tubes or pipe sections including all gusset plates, bolts, nuts, cutting , rivets, welding etc , fixing in cement concrete foundation block of size 500*500*600 mm in M20 grade etc complete job including all carriages as directed by the Engineer- Incharge. Design to be approved by the authority

Providing and fixing of interpretation sign board in vinyl / acrylic board or sheets upto the size of 5.25 sqm (Two way /Four way display as approved , alongwith necessary information carrying as per requirement, fixed in the frame made up of high quality stainless steel with LED strips lights /tubelight on the interior sides of stainless steel frame for sufficient illumination to lit up the contents, including all necessary electrical wiring,lightening ,connections and commissioning at site etc. complete job, including fixing in M15 cement concrete grade pedestal in foundation of .900x350x750mm size including excavation and all carriages upto site. Design to be approved by authority.

Providing of planters of overall exterior size 500mm width of varried length and 450mm height above ground level with 150 mm thk walls in Rcc 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) including foundation in soling,cement concrete 1:2:4, curing , centering, shuttering, finishing and reinforcement of approved size with 25mm thk devri tile cladding in 1:3 cement mortar above ground level, including all carriages etc upto site complete job as per authority.This item shall includes the filling of good earth, compost, plantation etc in planters. design to be approved by authority.(Area of sides to be measured for all the four sides above ground level for payment purpose

Electrical

Supply, Installation, Testing and Commissioningof Ornamental moulded double arm cast iron poles of reputed make / design subjected to approvel before installation by Srinagar smart city limited ) with 15" base plate and 3mtrs height enamelled coated and 1-3 Amp single pole MCB of Legrand /L&T/Siemens/Hager,2x 1.5 sq mm FRLS cu wire Havells , polycab make ,Spark earthing grouted in ground to be fitted with foundation block bolt , including two way bracket lights 30 watts LED lamp with bracket of approved design from srinagar smart city, including foundation of M20 mix with dimensions 450mm x 450mm x 600mm.

Supplyingand erecting LED flexiblestrip light 5 mtr length upto 75W conforming IP 65 of any colour with driver complete. Mouting channel in light weight, made of aluminium(20(W)x14(H)) with diffuser screen, LED-DC 24V, source Efficacy>80lm/W, Nos. of LED's-180/Meter minimum,LED-Epistar/equivalentSMD type,yellow glue 3M,120 degree beam angle,It also includes External IP67 metal body Electronic Power Supply for LED Module,which offers Protection against Short Circuit, Over- Voltage & Over- Current, with in-built surge protection.

Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 25 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification.

Supplying, installation and testing of maintenance free earthing comprising of Electrode of 17.2 mm diameter Low Carbon Steel with 250 micron molecular copper bonded earthing rod of Length 3m along with 25 kg Carbon based environment friendly back fill ground enhancing compound required to fill up the excavated earth with required quantity complete, and recording the results Specification

Bollad lights.

Supply, Installation, Testing and Commissioning of Rectangular Up/Down Light 18W LED,3000k IP 68 .The housing in light weight, made of high strength die cast aluminium and coated by static powder making it weather resistant.Protection screen in tempered glass with high impact resistance(IK10) . Premium thermal management by high heat conductivity aluminum alloy and thermal fins. SS Cover. Pure Polyester powder coating. Precise structure and multi-protection silicon rubber seal guarantees the fixture IP67 rated. Length – 231mm,Depth – 110mm, Width-90mm, Weight - 1.7Kgs. Power LED Module with high efficacy LED's, on Printed Circuit Board with metal core plate,P.F>0.9,voltage input AC100-277V,50/60Hz. In-Built Electronic Power Supply for LED Module,which offers Protection against Short Circuit, Over- Voltage & Over- Current, with in-built surge protection. Lens made of PC offers asymmetric light distribution. Estimated LED Lifetime is 70,000 hours minimum. LM80 report from LED Manufacturer should be submitted. Minimum Light fixture Lumen output is 400Lumens. LM 79 Report should be submitted from UL Authorised Laboratory. Sample Should be submitted to Srinagar smart city for approval

Up/down lights.

Providing & laying 8” dia PVC pipe.

Carriage of materials by mechanical transport from source to road site of work including loading, unloading and stacking.

Earth avg. lead 06 km

Earth avg. lead 07 km

Earth avg. lead 20 km

Building rubbish.avg. 07 km.

Building rubbish.avg. 09 km.

Stones avg. lead 10 kms.

Stones avg. lead 15 kms.

40 mm stone agg. avg. lead 10 kms.

--do-- lead 13 kms.

--do-- lead 15 kms.

--do-- lead 16 kms.

20 mm avg. 10 km.

20 mm avg. 13 km.

20 mm avg. 15 km.

20 mm avg. 16 km.

Sand avg. 10 kms.

Sand avg. 15 kms.

Sand avg. 16 kms.

Sand avg. 20 kms.

Cement avg. lead 02 km

Cement avg. lead 05 km

Steel avg. lead 02 km

Steel avg. lead 05 km

Carriage of materials from road site to site of work by manual labour including loading unloading and stacking (50 mtr).

Stones.

40 mm agg.

20 mm agg.

Cement.

Steel.

Earth.

Building rubbish

Carriage of materials from road to site of work by manual labour avg. 100 mtrs. including loading unloading and stacking.

Stones.

20 mm agg.

Cement.

Building rubbish

Carriage of materials from road to site of work by manual labour avg. 200 mtrs. including loading unloading and stacking.

Stones.

40 mm agg.

20 mm agg.

Cement.

Steel.

Earth.

Carriage of extracted materials comprising of mulba, unhygienic material silt etc. by boats in upstream/down stream direction through a lead (in water) upto 500 mtrs. incl. loading unloading and stacking.

Carriage of materials unloaded from boats upto temporary dumping site (road site) by manual labour through a lead of 200 mtrs. incl. loading unloading and stacking.

Carriage of extracted materials from excavated site to temporary dumping site (road site) directly through a lead of 200 mtrs. incl. loading unloading and stacking.

Carriage of extracted materials from temporary dumping site (road site) to actual dumping site by mechanical transport through a lead of 09 km. incl. loading unloading and stacking.

Supply, installation, testing and commissioning of HDPE Pipeline including providing of all fitting and accessories like elbows, tees, reducers, sockets, etc 50mm x PN6 HDPE Pipe PE80/63 (IS 4984)(MAKE: CAPTAIN / HARVEL / VERTX)

Providing, fabricating and installation of ticket counter of size 1.8x1.5m in Allumunium composite pannels including M15 grade cement flooring ,opening of doors and fixed windows glasses of 3mm thick translucent white acrylic plastic sheet as per direction of incharge engineer with all fixing arrangement at site etc. complete job and necessary mild steel rectangular hollow section(70x50x4mm) in vertical posts fixed in cement concrete 1:2:4 in foundation with excavation as per requirement at site.including fixing of truss in Ms built up section (angles, tees,gusset plates, nut and bolts) of area 2.1x1.8m including sofit and G.I profile sheets of 0.5mm thk in roof, including precoated G.I eaves of 250 mm wide, cutting,welding etc. complete job. including all carriages upto site etc. and other extra charges complete job. Design to be approved by authority

Providing, fabricating and installation of vending kiosk of size 3x3m in Allumunium composite pannels including M15 grade cement flooring ,opening of doors and fixed windows glasses of 3mm thick translucent white acrylic plastic sheet as per direction of incharge engineer with all fixing arrangement at site and necessary mild steel rectangular hollow section(70x50x4mm) in vertical posts fixed in cement concrete 1:2:4 in foundation with excavation as per requirement at site.including fixing of truss in Ms built up section (angles,tees, gusset plates, nut and bolts) of area 3.3x3.3m including sofit and G.I profile sheets of 0.5mm thk in roof, including precoated G.I eaves of 250 mm wide, cutting,welding etc. complete job. including all carriages upto site etc. and other extra charges. Design to be approved by authority

Providing, fabricating and installation of vending kiosk of size 3x3m in Allumunium composite pannels including M15 grade cement flooring ,opening of doors and fixed windows glasses of 3mm thick translucent white acrylic plastic sheet as per direction of incharge engineer with all fixing arrangement at site and necessary mild steel rectangular hollow section (70x50x4mm) in vertical posts fixed in cement concrete 1:2:4 in foundation with excavation as per requirement at site including fixing of truss in Ms built up section (angles,tees, gusset plates, nut and bolts) of area 3.3.x3.3m including sofit and G.I profile sheets of 0.5mm thk over the top, including precoated G.I eaves of 250 mm wide, cutting ,welding etc. complete job. including all carriages upto site etc. and other extra charges. Design to be approved by authority

Supplying & erecting mains with 2x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places.

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in 4 Cement mortar 1:4 ( 1 cement : 4 coarse sand)

Structural steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

WANI INFRATECH PRIVATE LIMITED

Ms Ghulam Nabi Magray