Improvements to road Sunag Janamatti Arakeri MDR from Ch 0.00Km to 8.85Km in Bilagi taluka of Bagalkote district under H/A 4059 CMIDP for the year 2025-26

NAME OF WORK:Improvements to road Sunag Janamatti Arakeri MDR from Ch 0.00Km to 8.85Km in Bilagi taluka of Bagalkote district under H/A 4059 CMIDP for the year 2025-26 WI.NO-PWD/2025-26/RD/WORK_INDENT30983

Sl No Item Name Item Code Unit Quantity Amount

1 Item Description : Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness. By Mechanical Means using Dozer - In area of light jungle Item Code : 2.5.ii.a Unit : 100 m2 111.12 45853.67

2 Item Description : Scarifying the existing bituminous road surface to a depth of 50 mm and disposal of scarified material by Mechanical Means using Hydraulic excavator with in all lifts and lead. Ref to MoRT&H : IRC - 305.4.3 Item Code : 3.5 Unit : m² 6215 39154.5

3 Item Description : Construction of Subgrade and Earthen Shoulders - Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2. Ref to MoRT&H : IRC - 305 Item Code : 3.6 Unit : m³ 1706.41 883323.14

4 Item Description : Granular Sub-Base - By Mix in Place Method - Construction of Granular Sub-Base of required grading as per design spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with front end loader at OMC and compacting with vibratory roller to achieve the desired density, complete as per clause 401 - For Grading -V Material. Ref to MoRT&H : IRC - 401 Item Code : 4.2.B.v Unit : m³ 1734.55 4296393.62

5 Item Description : Wet Mix Macadam (Plant Mix Method) - Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver/grader in sub-base / base course on well prepared surface and compacting with vibratory rollerto achieve the desireddensity. Ref to MoRT&H : IRC - 406 Item Code : 4.17 Unit : m³ 1735.25 4662529.99

6 Item Description : Prime Coat over WMM/WBM - Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 kg/m2 using mechanical means. Ref to MoRT&H : IRC - 502 Item Code : 5.1.A.i Unit : m² 7425 319646.25

7 Item Description : Tack coat on Bituminous surface - Providing and applying tack coat with VG-10 Bitumen using pressure distributor at the rate of 0.20 kg/m2 on the prepared bituminous surface cleaned with mechanical broom. Ref to MoRT&H : IRC - 503 Item Code : 5.32 Unit : m² 25465 320859

milestone-1 10567760.17

8 Item Description : Bituminous Macadam Grading - II for traffic <20 MSA - Providing and laying Bituminous Macadam with 40/60 TPH capacity hot mix plant using crushed aggregates of specified grading premixed with bituminous binder VG-30 @ 3.4% by weight of mix, transported to site, laid over a previously prepared surface with mechanical paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction. Ref to MoRT&H : IRC - 504 Item Code : 5.8.ii.C Unit : m³ 1329.63 10695610.2

milestone-2 10695610.2

9 Item Description : Semi Dense Bituminous Concrete - Providing and laying Semi Dense Bituminous Concrete with 40/60 TPH capacity hot mix plant batch type using crushed aggregates of specified grading premixed with bituminous binder VG-30 @ 5% by weight of mix and filler, transported to site, laid over a previously prepared surface with mechanical paver finisher to the required grade, level and alignment and rolled as per MoRTH V revision. Ref to MoRT&H : IRC - IRC-37:2018 Item Code : 5.31 Unit : m³ 650.37 6932684.05

10 Item Description : Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface - Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 g/m2 area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35:2015.The finished surface to be level, uniform and free from streaks and holes. Ref to MoRT&H : IRC - 803 Item Code : 8.15 Unit : m² 926 515319

11 Item Description : Supplying and Fixing of Molded Shank Raised Pavement Markers / Cats Eye made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 16000 kg tested in accordance to ASTM D 4280 Type H and complying to Specifications of Category A of MORTH Circular No RW/NH/33023/10-97 DO III Dt 11.06. 1997. The height, width and length shall not exceed 50 mm, 100 mm and 102 +/- 2 mm and with minimum reflective area of 13 cm2 on each side and the slope to the base shall be 35 +/- 5 degree. The strength of detachment of the integrated cylindrical shanks, (of diameter not less than 19 +/- 2 mm and height not less than 30+/- 2 mm) from the body is to be a minimum value of 500 Kg. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturers recommendation and complete as directed by the engineer.The contractor shall submit a two year warranty for satisfactory field performance including stipulated retro-reflectance of the reflecting panel, to the Engineer. Ref to MoRT&H : IRC - MoRTH 806 Item Code : 8.43 Unit : No. 576 220752

12 Item Description : Construction of Embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded with desired compaction. Item Code : 1.7 Unit : Cum 66.19 7853.44

13 Item Description : Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. Item Code : 1.8 Unit : Cum 2269.32 957879.97

14 Item Description : Cable Duct Across the Road - Providing and laying of a reinforced cement concrete pipe duct, 300 mm dia, across the road (new construction), extending from drain to drain in cuts and toe of slope to toe of slope in fills, constructing head walls at both ends, providing a minimum fill of granular material over top and sides of RCC pipe as per IRC:98-1997, bedded on a 0.3 m thick layer of granular material free of rock pieces, outer to outer distance of pipe at least half dia of pipe subject to minimum 450 mm in case of double and triple row ducts, joints to be made leak proof, invert level of duct to be above higher than ground level to prevent entry of water and dirt, all as per IRC: 98 - 1997 and approved drawings. - Double row for two utility services Item Code : 8.29.ii Unit : m 30 126283.5

15 Item Description : Retro-Reflectorised Traffic Signs - Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67:2022 made of Class B Type IV retro reflective sheeting fixed over 2 mm thick aluminium sheeting vide clause 803.1, 3mm/4mm thick Aluminium composite material sheet depending on the size of the sign fixed over the back support frame of min 25 x 25 x 3mm angle mounted on a mild steel circular pipe 65 NB, 3.2 mm thickness firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing.The sign shall be maintained as per section 12 of IRC:67:2022 - 90 cm equilateral triangle Item Code : 8.5.ii Unit : each 4 19618.2

16 Item Description : Metal Beam Crash Barrier - Type - A, W : Metal Beam Crash Barrier - Providing and erecting a W metal beam crash barrier system comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per clause 811. Ref to MoRT&H : IRC - 811 Item Code : 8.25.i Unit : m 400 1528800

17 Item Description : Providing and fixing board displaying information, such as Name of work, Tender cost, Name of Contractor, Work completion and liability period etc, having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge & MoRTH specification 804. Ref to MoRT&H : IRC - MoRTH 804 Item Code : 8.54 Unit : No. 1 9450

18 Item Name : Road Maintenance for 3rd year for road with BM+SDBC as wearing coat Maintenance of Road for 3rd year by Clearing and Uprooting Vegetation on either sides of the road, Maintenance of surface drains by clearing, cleaning, reshaping, deepening of side drains, Stripping excess soil from the shoulder surface and Making up loss of material/ irregularities on shoulder wherever necessary , Maintenance & painting of 200 metre and km stones , White washing of parapet walls of CD work and tree trunks , Patching of shallow and deep potholes using premixed bitumen mixes corresponding to the layers of the road and Repairs to CDs including Vent Clearance. SE BGM Circle Approved rates Unit : Per Km 4.63 144502.3

19 Item Code : SE BGM Circle Approved ratesItem Name : Road Maintenance for 4th year for road with BM+SDBC as wearing coat Maintenance of Road for 4th year by Clearing and Uprooting Vegetation on either sides of the road, Maintenance of surface drains by clearing, cleaning, reshaping, deepening of side drains, Stripping excess soil from the shoulder surface and Making up loss of material/ irregularities on shoulder wherever necessary , Maintenance & painting of 200 metre and km stones , White washing of parapet walls of CD work and tree trunks , Patching of shallow and deep potholes using premixed bitumen mixes corresponding to the layers of the road and Repairs to CDs including Vent Clearance. SE BGM Circle Approved rates Unit : Per Km 4.63 253399.9

20 Item Code : SE BGM Circle Approved rates Item Name : Road Maintenance for 5th year with BM+SDBC coat as wearing coat Maintenance of Road for 5th year by Clearing and Uprooting Vegetation on either sides of the road, Maintenance of surface drains by clearing, cleaning, reshaping, deepening of side drains, Stripping excess soil from the shoulder surface and Making up loss of material/ irregularities on shoulder wherever necessary , Maintenance & painting of 200 metre and km stones , White washing of parapet walls of CD work and tree trunks , Patching of shallow and deep potholes using premixed bitumen mixes corresponding to the layers of the road and Repairs to CDs including Vent Clearance. SE BGM Circle Approved rates Unit : Per Km 4.63 319794.1

21 Item Description : Dismantling of Structures - Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead - By Mechanical means - Dismantling Brick / Tile work / rubble masonry / pitching / etc by mechanical means Item Code : 2.11.II.A Unit : m³ 70.08 13245.12

22 Item Description : Removing all type of Hume Pipes and Stacking including Earthwork and Dismantling of Masonry Works. - Upto 600 mm dia Item Code : 2.17.ix.A Unit : m 67.5 67827.38

23 Item Description : Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenaces required to complete the work - In all kinds of soils Depth upto 3 m Item Code : 1.14.1 Unit : Cum 178.62 13691.22

24 Item Description : Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. Item Code : 1.8 Unit : Cum 287.27 121256.67

25 Item Description : Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) - Mix 1:4:8( M5) Using 40 mm nominal size graded crushed coarse aggregates Item Code : 2.1.2 Unit : Cum 43.9 247253.58

26 Item Description : Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) - Sqm0 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Item Code : 2.2.1.1 Unit : Cum 57.65 395138.86

27 Item Description : Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) - Sqm0 Design Mix Using 20 mm nominal size graded crushed coarse aggregates Item Code : 2.4.2 Unit : Cum 142.38 1006524.09

28 Item Description : Laying Reinforced Cement Concrete Pipe NP4 / Prestressed Concrete Pipe on First Class Bedding in Single Row - Laying Reinforced cement concrete pipe NP4/prestressed concrete pipe for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets . - 1000 mm dia. Ref to MoRT&H : IRC - 2900 Item Code : 9.1.i Unit : m 40 398118

29 Item Description : Laying Reinforced Cement Concrete Pipe NP4 / Prestressed Concrete Pipe on First Class Bedding in Single Row - Laying Reinforced cement concrete pipe NP4/prestressed concrete pipe for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets . - 1200 mm dia. Ref to MoRT&H : IRC - 2900 Item Code : 9.1.ii Unit : m 62.5 706584.38

30 Item Description : Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and Technical specifications - Stone/Boulder. Ref to MoRT&H : IRC - 2504 Item Code : 14.4.A Unit : m³ 86.4 173456.64

31 Item Description : Steel Fabrication Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. All other type of structures Item Code : 2.11.h Unit : t 4.89 386776.36

milestone-3 14566208.76

Earth work 4441.62 3553.296

Asphalt 1980 1584

NAME OF WORK:Improvements to Badagi cross Hanchinal MDR From km 0.00 to 3.70 and 9.10 to 11.60 in Bilagi Taluk (Under 4059-80-051-0-60-132 for the year 2025-2026) WI.NO-PWD/2025-26/RD/WORK_INDENT30666

Milestone dates Physical works to be completed Period from the date of issue of Notice to proceed with the work Amount Liquidated damages 0.1% of the contract price per day in Rupees rounded off to nearest hundred (Rs)

1 Item Description : Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, including removal and disposal of top organic soil not exceeding 150 mm in thickness. By Mechanical Means using Dozer - In area of light jungle 2months 10567760.17 10567.76 29.49

2 Item Description : Bituminous Macadam Grading - II for traffic <20 MSA - Providing and laying Bituminous Macadam with 40/60 TPH capacity hot mix plant using crushed aggregates of specified grading premixed with bituminous binder VG-30 @ 3.4% by weight of mix, transported to site, laid over a previously prepared surface with mechanical paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction. Ref to MoRT&H : IRC - 504 2months 10695610.20 10695.61 29.85134199

3 Item Description : Semi Dense Bituminous Concrete - Providing and laying Semi Dense Bituminous Concrete with 40/60 TPH capacity hot mix plant batch type using crushed aggregates of specified grading premixed with bituminous binder VG-30 @ 5% by weight of mix and filler, transported to site, laid over a previously prepared surface with mechanical paver finisher to the required grade, level and alignment and rolled as per MoRTH V revision. Ref to MoRT&H : IRC - IRC-37:2018 2 months 14566208.76 14566.21 40.65414418

Executive Engineer

PUBLIC WORKS DEPARTMENT DIVISION

Financial Year Total value of Civil Engineering works executed and payments received in the last five years (in Rs.lakhs)

Billed upto date during 2024-25

Attach Chartered Accountant's Yearwise Statements

Work executed as prime contractor (in the same name) on works of similar nature during the five years specified)

Project Name Name & Address of the Employer Name of Work Contract Number Value of contract Rs. Lakhs Date of markout / Date of Handing over of site Specified period of completion (including/ excluding Monsoon) Actual date of completion Remarks (appreciation letter received for early completion or reasons, if there is delay in completion)

Attach Workdone Certificate for each work indicated above, in Format 3, obtained from the Competent Authority.

FORMAT FOR WORK DONE CERTIFICATE TO BE OBTAINED FROM COMPETENT AUTHORITY

This is to certify that M/s Sri / Smt.

has executed / is executing (strike off which ever is not applicable) the work of..

in this Organisation. The details of the work is as under :

1 Name of the Project

2 Name of the Work

3 Contract Amount

4 Date of signing the Agreement

5 Date of handing over of the Site

6 Progress 2017

January February March April May June July August September October November December

Earthwork Physical in Cum

Financial in lac

GSB Physical in Cum

Financial in lac

WBM/WMM Physical in Cum

Financial in lac

Asphalting (Including DBM/BC/BM/SDBC) Physical in Cum

Financial in lac

6 Progress 2018

January February March April May June July August September October November December

Earthwork Physical in Cum

Financial in lac

GSB Physical in Cum

Financial in lac

WBM/WMM Physical in Cum

Financial in lac

Asphalting (Including DBM/BC/BM/SDBC) Physical in Cum

Financial in lac

PCC/RCC Physical in Cum

Financial in lac

TMT Steel Physical in Tonne

Financial in lac

6 Progress 2019

January February March April May June July August September October November December

Earthwork Physical in Cum

Financial in lac

GSB Physical in Cum

Financial in lac

WBM/WMM Physical in Cum

Financial in lac

Asphalting (Including DBM/BC/BM/SDBC) Physical in Cum

Financial in lac

PCC/RCC Physical in Cum

Financial in lac

TMT Steel Physical in Tonne

Financial in lac

6 Progress 2020

January February March April May June July August September October November December

Earthwork Physical in Cum

Financial in lac

GSB Physical in Cum

Financial in lac

WBM/WMM Physical in Cum

Financial in lac

Asphalting (Including DBM/BC/BM/SDBC) Physical in Cum

Financial in lac

PCC/RCC Physical in Cum

Financial in lac

TMT Steel Physical in Tonne

Financial in lac

6 Progress 2021

January February March April May June July August September October November December

Earthwork Physical in Cum

Financial in lac

GSB Physical in Cum

Financial in lac

WBM/WMM Physical in Cum

Financial in lac

Asphalting (Including DBM/BC/BM/SDBC) Physical in Cum

Financial in lac

PCC/RCC Physical in Cum

Financial in lac

TMT Steel Physical in Tonne

Financial in lac

7 Stipulated Period of Completion (including monsoon)

8 Prescribed Date of completion.

9 Actual Date of Completion/Probable Date of Completion.

10 Cost of balance work (if work is in progress)

11 Reasons if any for delay in completion, if work completion is delayed

12 Penalty if any imposed

13 Any other information.

* Monthlywise progress shall be furnished seperately.

Place : (Authorised Signatory)

Address for correspondence:

Monthly Physical and Financial Progress Achieved in all Contracts which are referred to in Format 3

Names of Works Item of work Names of Employers 2017

January February March April May June July August September October November December Remarks (Indicate contract reference)

Earthwork Physical in Cum

Financial in lac

GSB Physical in Cum

Financial in lac

WBM/WMM Physical in Cum

Financial in lac

Asphalting (Including DBM/BC/BM/SDBC) Physical in Cum

Financial in lac

PCC/RCC Physical in Cum

Financial in lac

TMT Steel Physical in Tonne

Financial in lac

Names of Works Item of work Names of Employers 2018

January February March April May June July August September October November December Remarks (Indicate contract reference)

Earthwork Physical in Cum

Financial in lac

GSB Physical in Cum

Financial in lac

WBM/WMM Physical in Cum

Financial in lac

Asphalting (Including DBM/BC/BM/SDBC) Physical in Cum

Financial in lac

PCC/RCC Physical in Cum

Financial in lac

TMT Steel Physical in Tonne

Financial in lac

Names of Works Item of work Names of Employers 2019

January February March April May June July August September October November December Remarks (Indicate contract reference)

Earthwork Physical in Cum

Financial in lac

GSB Physical in Cum

Financial in lac

WBM/WMM Physical in Cum

Financial in lac

Asphalting (Including DBM/BC/BM/SDBC) Physical in Cum

Financial in lac

PCC/RCC Physical in Cum

Financial in lac

TMT Steel Physical in Tonne

Financial in lac

Names of Works Item of work Names of Employers 2020

January February March April May June July August September October November December Remarks (Indicate contract reference)

Earthwork Physical in Cum

Financial in lac

GSB Physical in Cum

Financial in lac

WBM/WMM Physical in Cum

Financial in lac

Asphalting (Including DBM/BC/BM/SDBC) Physical in Cum

Financial in lac

PCC/RCC Physical in Cum

Financial in lac

TMT Steel Physical in Tonne

Financial in lac

Names of Works Item of work Names of Employers 2021

January February March April May June July August September October November December Remarks (Indicate contract reference)

Earthwork Physical in Cum

Financial in lac

GSB Physical in Cum

Financial in lac

WBM/WMM Physical in Cum

Financial in lac

Asphalting (Including DBM/BC/BM/SDBC) Physical in Cum

Financial in lac

PCC/RCC Physical in Cum

Financial in lac

TMT Steel Physical in Tonne

Financial in lac

* Monthlywise progress shall be furnished seperately.

Place : CONTRACTOR

Address for correspondence:

Information on works which are yet to be completed.

Project Name Name & Address of the Employer Name of Work Contract Number Value of contract Rs.Lakhs Date of Markout / Date of Handing over of site Speified period of completion (including / excluding Monsoon) Cost of balance works remaining Rs.in Lac Probable date of completion.

Attach Certificate for each work indicated above, in Format 3, obtained from the Competent Authority

Information of the works for which Tender acceptance letters are received.

Project Name Name & Address of the Employer Name of Work Tendered Amount in Rs. Lac Specified period of completion (including / excluding Monsoon) Probable Date of Handing over of site.

Attach letters of Acceptance received.

Information of the works for which Tenderer has submitted Tender.

Project Name Name & Address of the Employer Name of Work Amount put to Tender in Rs.lac Specified period of completion (including / excluding Monsoon) Prescribed last date of submission of tender Probable date of decision on the Tender Remarks if any.

List of Machinery

Item of Equipment Requirement Owned / Hired / Leased Owner / Hired / Lease and available Remarks

No. Capacity Number / Capacity Age / Condition

BANKER’S CERTIFICATE

This is to certify that M/s. ________________________________________________ is a reputed company with a good financial standing. If the contract for this work, namely ________________________________________________________ (name of the work) is awarded to the above firm, we shall be able to provide overdraft/credit facilities to the extent of Rs._______________________________ to meet the working capital requirements for executing the above contract

Signature of the Bank Manger

along with Seal

Information on litigation in which the Tenderer is involved:

Other Party/Parties Employer Details of Dispute Amount involved Remarks showing Present Status