SPECIAL REPAIRS TO BLDG NO P- 151(QTR NO. 1 TO 4) AT NANDAMBAKKAM UNDER GE STM CHENNAI

Demolition of cement concrete (unreinforced) in ground floors and paving n.exc 15cm thick (below or above ground level) complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and as directed.

M & L non skid coloured ceramic tiles each tile area (square/rectangle) exc 0.06Sqm but not exceeding 0.11Sqm tile thickness 7 to 8 mm, in floors etc. set and joined in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer with CM 1:6 15mm thick for laying floor finishes complete all as specified and as directed.

M & L glazed ceramic tiles coloured 350 x 250 x7mm / 450 X 350 X 7mm thick on vertical surfaces such as skirting, dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick in CM 1:4 as backing coat for fixing dado tiles complete all as specified and as directed.

M & L Roughening surfaces of old concrete floor by picking, sweeping clean & washing down with water to remove dust, etc., brushing neat cement slurry with 3.0kg of cement per sqm complete all as specified and as directed.

M & L non skid ceramic coloured tiles, area of each tile exc 0.18sqm and n.exc 0.38sqm (square/rectangle) 7 to 8mm thick, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20mm thick cement screed in CM 1:6 complete all as specified and as directed.

All as per item No.6 here in before, but on vertical surfaces including 10mm thick CM 1:4 as in backing coat of dado/ skirting complete all as specified and as directed.

M & L chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment including 15mm thick cement screed bed in CM 1:6 complete all as specified and as directed.

All as per item No.8 here in before but bull nosed as in treads inclusive of screed bed in C.M 1:4 15mm thick complete all as specified and as directed.

All as per item No.8 above but on vertical surfaces inclusive of back coat in C.M 1:4 10mm thick complete all as specified and as directed.

M & L PCC 1:3:6 75mm thick Type C2 (using 40mm graded aggregate) as in plinth protection/ hard standing finishing cement concrete surface even and smooth without using extra cement complete all as specified and as directed.

M & L for providing 100mm thick, PCC 1:4:8 type D2 using 40 mm graded stone aggregate as in sub base of floors and pavings etc. complete all as specified and as directed.

M & L Sand filling under floors or in foundations including watering and consolidation

M & L machine pressed Pre cast rubber finished coloured PCC interlocking paver block any shape and size conforming to IS 15658-2006 of 60mm thickness, M-35 Grade of cement concrete of with grey cement and pigment complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for

M & L mild steel work as in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.Fe-410-W(Gde-E-250) quality- B complete all as specified and as directed.

Dismantling of (corrugated, semi-corrugated, etc.) steel sheeting in roof coverings.

S & F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S & F pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed.

M & L preparing surfaces of new steel iron work exceeding 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

Cutting chases, pinning in, making good to facings where required & pointing in cement mortar 1:3 for concealed water tubing, etc.& making good, cutting n.exc 10 cm girth complete all as specified and as directed.

Supplying and laying of CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors of outer dia 20mm including taking down complete all as specified and as directed.

Supplying and laying of CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors of outer dia 25mm including taking down complete all as specified and as directed.

Supplying and laying of brass elbow of 20mm for CPVC pipe

Supplying and laying of brass Tee of 20mm for CPVC pipe

Supplying and laying of brass Elbow (3/4 x 1/2) of CPVC pipe outer diameter of 20mm

Supplying and laying of brass elbow for CPVC pipe outer diameter of 25mm

Supplying and laying of brass Tee for CPVC pipe outer diameter of 25mm

S & F in repair Vitreous China wash down water closet (pedestal pattern), white (excluding flushing cistern and flush pipe) including Pedestal pan and trap, connection to drain (or outgoing pipe) and to flushing pipe, anti syphonage pipe, seat cover etc., complete all as specified and as directed.

S & F in repairs vitreous China wash basin, white, flat back, size 550x400mm including 32mm waste fittings, brass, chromium plated for glazed ware basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed.

M & L in repairs 10 litres capacity PVC low level flushing cistern including flush pipe complete with ISI marked body and ISI marked syphon complete all as specified and as directed.

S & F PVC connections 15 mm size with PTMT nuts of length 450mm complete all as specified and as directed.

S & F in repairs bib cock, fancy type chromium plated, screwed down, screwed for iron pipe, 15 mm bore or for brass ferrule and fixed complete all as specified and as directed.

S & F in repairs bib cock two way double Handle with flange, fancy type chromium plated, screwed down, screwed for iron pipe, 15 mm bore or for brass ferrule and fixed complete all as specified and as directed.

S & F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed.

S & F in repairs fancy type chromium plated angle cock long body complete all as specified and as directed.

S & F CP wall mixer 2 in 1 for mixing hot & cold water screwed down for iron pipe & fixed with provn for connection to over head shower with bend pipe complete all as specified and as directed.

S & F swan neck bib taps for sink chromium plated, screwed down, high pressure, with or without lettered with long screwed shanks and fly nuts, screwed for 15mm bore complete all as specified and as directed.

S & F in repairs pillar taps, fancy taps chromium plated, screwed down, high pressure, with or without lettered ‘HOT’ or ‘COLD’ with long screwed shanks and fly nuts, screwed for 15mm bore complete all as specified and as directed.

S & F stainless steel Soap Dish

S & F Towel rail 600mm long & including Chromium plated brass screws & wooden / plastic cleats (Minimum weight 190gms) complete all as specified and as directed.

S & F in repairs Chromium plated 125mm shower rose with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and as directed.

S & F sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460 mm bowl size 410 mm x 330 mm x 160 mm including 40mm dia brass cp waste coupling complete all as specified and as directed.

S & F kitchen plate rack made stainless steel 0.8mm thick complete of size not less than 900 x 750 x 200mm, duly assembled and fixed to wall with wall screws / fasteners complete all as specified and as directed.

M & L machine cut Granite slab 20mm thick over cement screed base laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete nosing edges including 20mm thick cement screed in CM 1:6 complete all as specified and as directed.

M & L Rounding to edges of stones slab one edge, such as in steps, cooking platform and other similar situation

S & F in repairs 75mm PVC (SWR) floor trap plain with grating including jointing with solvent cement

M & L for 75mm PVC (SWR) pipes of Type 'B' single socketed in any length with rubber ring joints, laid in trenches or walls

S & F PVC (SWR) bends any radius 75mm bore with access door

S & F PVC (SWR) vent cowl 75mm bore

S & F PVC (SWR) branch piece, single (single T) equal or unequal 75mm with access door

M & L for 110mm PVC (SWR) pipes of type 'B' single socketed in any length with rubber ring joints, laid in trenches or walls

S & F PVC (SWR) bends any radius 110mm bore with access door

S & F PVC (SWR) vent cowl 110mm bore

S & F PVC (SWR) branch piece, single (single T) equal or unequal 110mm with access door complete all as specified and as directed.

S & F rotational moulded polyethylene water storage tanks 1000 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I. including 20mm Nipple suitable for HDPE water tank. (minimum weight 20mm-45gms) complete all as specified including dismantling of existing water old water tank and credit offer to contractor.

S & F of 25mm ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe & fixed complete all as specified and as directed. (Minimum weight 25mm-455gms)

S & F 25 mm bore gun metal globe or gate, valves with iron screwed both ends for iron pipe & fixed complete all as specified and as directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) complete all as specified and as directed.

M & L Mild steel TMT bars of 6mm to 8mm dia and over of grade Fe 500, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming complete all as specified and as directed.

M & L providing precast cement concrete 1:2:4 type B1 using 20mm graded crushed stone aggregate as in cover slabs, shelves and set in cement mortar 1:4 complete with joints to match complete all as specified and as directed.

M & L for Reinforced cement concrete (Nominal mix) of Type B1 1:2:4 (20mm graded stone aggregate) as in slabs supported by walls complete all as specified and as directed.

M & L Use and waste formwork to soffits of suspended slabs such as roof slabs, landings, rough finished surfaces of concrete flat complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) n.exc 1.5 sqm each complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame exc 1.5 sqm but n.exc 4 sqm each complete all as specified and as directed.

S & F for Second class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints supplied and fixed complete all as specified and as directed.

S & F Second class hardwood rail and style 35 mm thick, Factory Made shutters Plain framed (two panel) with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering rail and stile as per IS: 1003 (Part I), kiln seasoned and supplied and fitted to chowkats complete all as specified and as directed.

S & F Second class hardwood 35 mm thick glazed and skeleton door shutters, open rebated and prepared to receive glass, gauze etc., without sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) and supplied and fitted to chowkats complete all as specified and as directed.

S & F in stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples, complete all as specified and directed.

S & F FI Hold fast Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pestle hinges large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed.

Preparing surfaces of treating small articles such as stop, covers, gully gratings, holdfasts, ends of posts, backs of chowkats, etc., area n.exc 0.1 sqm each complete all as specified and as directed.

S & F Solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification &drawing

S & F Factory Made Solid PVC Moulded Door Shutters 28 to 30mm thick with wood free EPS (stiles) with 2,4, or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face supplying & fixing in frame at site as per manufacturers instructions.

S & F factory made uPVC white colour Casement window single panel with S.S. friction hinges (300 x 19 x 1.9 mm), made of (small series) frame 47 x 50 mm & sash 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glass pane glazing bead of appropriate dimension (Area of window upto 0.75 sqm.) comprising of uPVC multichambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, complete all as specified and as directed.(Glass shall be paid separately) Note:- For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made

S & F factory made uPVC white colour fixed glazed window / ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality complete all as specified and as directed. (Glass shall be paid separately). Note:- For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made

S & F Anodised aluminium deco grill of size of mesh n.exc 75mm x 75mm, thickness shall approx. be 6mm, decorative type and fixed with suitable aluminium section fixed to alum frame of windows / ventilators complete all as specified and as directed.

M& L Figured glass, ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and as directed.

S & F 100mm size mild steel butt hinges, medium weight, cold rolled fixed with stainless steel screw with frame complete all as specified and as directed.

S & F Aluminium anodised barrel tower bolts of extruded section 200mm size complete all as specified and as directed.

S & F Aluminium anodised barrel tower bolts of extruded section 125mm size complete all as specified and as directed.

S & F Extruded aluminium alloy handles, fabricated type, anodised 150mm long complete all as specified and as directed.

S & F Extruded aluminium alloy handles, fabricated type, anodised 125mm long complete all as specified and as directed.

S & F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed.

S & F stainless steel curtain rods of 25mm dia (Drapery rods) heavy duty complete all as specified and as directed.

S & F stainless steel brackets for 25mm dia curtain rods complete all as specified and as directed.

S & F stainless steel decorative finials for 25mm curtain rods complete all as specified and as directed.

Mild steel 300mm long ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

S & F in repairs Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination 18/19mm thick fixed with screws to timber frame work as in shelves / cupboard shutters and partitions complete all as specified and as directed.

M & L 2nd class hardwood exc 13 and n.exc 25 sqm Plain fillets. Square, rectangular or triangular in section, clean sawn, secured with nails or brads complete all as specified and as directed.

M & L 6mm thick teak wood lipping for external of 28/29 thickness of board complete all as specified and as directed.

S & F 30mm continuous (piano hinges, mild steel, bright finish or electro galvanised complete all as specified and as directed.

S&L for 75mm Rim latch with two levers, of mild steel body stove enamelled finish with brass knob or lever handle and fixed complete all as specified and as directed.

Taking down cement or cement lime plaster, on brick or stone walls, ceiling including raking out joints, hacking for key, scrubbing down with water, etc. Any description complete all as specified and as directed.

M & L rendering 15mm thick on other than fair faces of brick work or concrete surfaces of wall in CM 1:6 finished even and smooth without using extra cement complete all as specified and as directed.

M/L Rendering 15 mm thick in CM 1:4 on wall mixed with water proofing compound as per manufacturers instruction, finished plastered surface even and smooth without using extra cement complete all as specified and as directed. Note:- WPC will be measured and paid separately.

M & L rendering 10mm thick on fair faces of concrete surfaces of ceiling in CM 1:3 finished even and smooth without using extra cement complete all as specified and as directed.

Complete removal of existing treatment washing, rubbing down and stopping of white wash/ colour wash /cement base paint /distempered any description on wall surfaces complete all as specified and as directed.

M & L applying two coats of oil bound distemper white or tinted on walls complete over a coat of wall primer and two coats of wall care putty to obtain uniform smooth surfaces complete all as specified and as directed.

M & L applying two coats of exterior emulsion weather proof paint over one coat of external wall primer and two coats of wall care putty complete all as specified and as directed.

M & L preparing newly plastered surfaces of ceilings and applying three coat of white wash to match with the existing surfaces complete all as specified and as directed.

M & L preparing newly plastered surfaces of walls and applying two coats of Oil bound distemper on untreated plastered surfaces of walls over a coat of wall putty and primer including necessary preparation of surfaces complete all as specified and as directed.

M & L preparing newly plastered surfaces of walls and applying two coats of exterior grade weather proof paint on untreated plastered surfaces of walls over a coat of putty and primer including necessary preparation of surfaces complete all as specified and as directed.

Preparing of old ceilings surfaces and applying one coats of white wash to match with the existing surfaces complete all as specified and as directed.

M & L painting new wooden surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer including preparation of surfaces complete all as specified and as directed.

Removing the existing roof treatment of any description completely and brushing the cleaned surfaces of concrete with neat cement slurry @ 3Kgs of cement per sq.m remove all the debris from site and rubbish off the premises complete all as specified and as directed.

M & L 25mm average thick, PCC 1:2:4 type B-0 using 12.50 mm graded stone aggregate as in levelling course over the roof slab complete all as specified and as directed.

M & L 10mm thick cement plaster in CM 1:3, mixed with water proofing compound over the levelling course while the concrete is green, finished even and smooth without using extra cement complete all as specified and as directed. Note:- WPC shall be measured and paid separately.

Supply only Liquid water proofing compound

M & L for APP Modified prefabricated five layer water proofing membrane, not less than 3 mm thick and weighing not less than 3.80 kg/sqm reinforced with non woven polyester matt black finished over compatible primer @ 0.3 Ltrs per sqm, and a bonding bitumen of VG-10 at 1.20 kg/sqm torching the membrane on whole surface uniformly while unrolling the membrane by LPG and sealed with trowel after necessary preparation of surface complete all as per manufactures instructions and finally finished with a coat of bit mastic aluminium paint @ 0.10 litre/sqm over a coat of blown bitumen 85/25 grade @ 1.20Kg/Sqm over the membrane. The Overlap joint shall be provided of 75mm in longitudinal direction and 100mm in transverse direction respectively. All the angles, abutments and the drainage outlets shall be sealed with extra care to ensure full bondage including preparatory work. Note:- The work shall be carried out by authorized applicators of manufacturers

Demolition brick work built in cement mortar including all quoins, arches Pillars etc., complete all as specified and as directed.

Demolition of cement concrete in any position and in description not otherwise provided for

M & L plain cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in water tank staging, etc. complete all as specified and as directed.

M/L Brick work with fly ash bricks old size straight or curved on plan exc 6 mean radius, built in cm 1:4 complete all as specified and as directed.

M & L PCC 1:2:4 type B-1 using 20mm graded aggregate as in coping and benching including weathering slightly rounded or chamfered angles and throating as directed including form work complete all as specified and as directed.

M & L Extra for forming fair finished to drains or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and as directed.

M & L Rendering in cm 1:4, 15 mm thick on fair faces of brick work including finishing the surface even and smooth without using extra cement complete all as specified and as directed. Note:- WPC shall be measured and paid separately

Taking down copper/ aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and as directed.

Material & Labour for Wiring complete with 1.5 sqmm single coreFRLSH PVC insulated unsheathed cable 1100 volts grade, multistranded with copper conductors conforming to IS specifications, drawn through and including non metallic rigid PVC conduit, PVC conduit fittings and conduit accessories or casing capping's including accessories fixed on wall / ceiling or concealed on wall, making good disturbed surfaces of walls and fixed on ceiling etc. with suitable clamps, screws, etc. or concealed in wall including terminal boxes fabricated with 1.6 mm MS sheet concealed in walls covered with plastic laminated sheet top cover 3 mm thick fixed with cadmium plated iron screws for housing the switches, switch sockets outlets, fan regulators, etc., including provn of 1.5 sqmm PVC insulated unsheathed cable with multistranded copper conductor as earth continuity conductor and connecting to common earth dolly all as specified and as directed :-

One light point controlled by one switch

One fan point controlled by one switch

One Exhaust fan point controlled by one switch

One 3 pin 5 amps switch socket on same board along with other switches.

One 3 pin 5 Amps switch socket on independent board

One bell point controlled by bell push switch on independent board.

All as per item No.119 herein before but with 4 Sqmm single core PVC cable for one 3 pin 15 amps switch socket outlet on independent board complete all as specified and as directed.

Taking down sub main wiring (or)power wiring complete upto2 runs of 10 Sqmm in PVC conduit removing to stores or taken as credit and making good the disturbed surfaces of wall, etc. complete all as specified and as directed.

M & L for sub main wiring with PVC insulated, 1100 volts grade single core FRLSH multistranded copper conductor cable conforming to IS specifications, 2 runs of 10 sqmm including one run of 10 sqmm single core multistranded copper conductor PVC insulated cables as earth continuity conductor with colour code drawn through and including one run of 25 mm dia rigid PVC conduit and conduit accessories or casing capping including accessories fixed on wall/ceiling etc., or concealed in wall and connecting to common earth dolly including taking down old unsv complete all as specified and as directed.

M & L for sub main wiring with PVC insulated, 1100 volts grade single core FRLSH multistranded copper conductor cable conforming to IS specifications, 2 runs of 6 sqmm including one run of 6 sqmm single core multistranded copper conductor PVC insulated cables as earth continuity conductor drawn through and including one run of 25 mm dia rigid PVC conduit and conduit accessories including accessories fixed on wall/ceiling etc., or concealed in wall, making good disturbed surfaces on walls and connecting to common earth dolly complete all as specified and as directed.

S & F in repairs Ceiling rose surface Bakelite 65mm x 50 mm two to three terminals complete all as specified and as directed.

S & F in repairs Modular Switch flush DIRECT TO FIT press type 10 amps single pole, one way, 240 Volts all as per site requirement complete all as specified and as directed.

S & F in repairs Modular Switch flush DIRECT TO FIT press type 16/20 amps single pole, one way, 240 Volts all as per site requirement complete all as specified and as directed.

S & F in repairs Modular Socket flush DIRECT TO FIT press type 10 amps single pole, one way, 240 Volts all as per site requirement complete all as specified and as directed.

S & F in repairs Modular Socket flush DIRECT TO FIT press type 16/20 amps single pole, one way, 240 Volts all as per site requirement complete all as specified and as directed.

S & F in repairs Modular Fan step regulator, 120W - 1 module for ceiling Fan of 1200 mm sweep complete all as specified and as directed.

S & F in repairs Modular white cover with plate with frame 2 module including flush box matching with white cement work if necessary complete all as specified and as directed.

S & F in repairs Modular white cover with plate with frame 3 module including flush box matching with white cement work if necessary complete all as specified and as directed.

S & F in repairs Modular white cover with plate with frame 6 module including flush box matching with white cement work if necessary complete all as specified and as directed.

S & F in repairs Modular white cover with plate with frame 8 module including flush box matching with white cement work if necessary complete all as specified and as directed.

S & F 30W bldg. security light fitting including suitable GI bracket and clamps nuts etc. with best in class design and robust heat sink along with class leading IP, and surge protections for long lasting performance including taking down old unsv light fitting complete all as specified and as directed.

S & F replacement of modular clad socket single pole and neutral enclosure with a two pin and earth plug top and socket complete with one single pole MCB 230 Volts 20/32 Amps complete all as specified and as directed.

S & F in repairs MCB Distribution board, 240 volts single pole and neutral, double door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link, 6 ways SPN Double door, fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete all as specified and as directed.

S & F in repairs MCB DP, 240 Volt, 32 Amps, 10 kA rupturing capacity 'C' series complete all as specified and directed including taking down old one complete all as specified and as directed.

S & F in repairs MCB SP, 240 Volt, 6-32 Amps, 10 kA rupturing capacity 'C' series complete all as specified and directed including taking down old one complete all as specified and as directed.

S & F in repairs 40W LED aluminium battens high wattage decorative ultra slim polycarbonate LED lighting fixture with high lumen output, environmental friendly, energy efficient complete all as specified and as directed.

S & F in repairs 10W LED battens decorative ultra slim square profile LED lighting fixture with extruded polycarbonate environmental friendly energy efficient complete all as specified and as directed.

Taking down old ceiling fan/ Exhaust fan and kept in MES store where as directed.

S & F in repairs/ replacement exhaust fan made of steel complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm complete all as specified and as directed.

S & F in repairs/ replacement exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 200mm complete all as specified and as directed.

S & F ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep 3 Star rating complete all as specified and as directed.

Supply, Fabricate, install, connect, test and commissioning energy meter EB type panel board , indoor type, powder coated, compartmentalised for each meter with MCB fabricated with 2 mm thick mild steel and suitable sized pressed steel frame work, with hinged type door and locking arrangements, chamber for aluminium busbars , provision of separate compartment and cutting for mounting existing KWH meters and provision of transparent glasses -04 Nos with following switch gear items internally connected with suitable capacity aluminium strip/ rods insulated , 6 Sq.mm FRLS copper wire with existing system and complete mounted on suitable size angle iron complete all as specified and comprising of the following :-

i) 4 Nos busbar of equal size of Aluminium conductor with PVC coloured heat shrinkable type sleeves continuous rating of 200 Amps mounted on fibre reinforced insulator.(1set), with LED indication lamps on incoming side. Ii) Incoming - MCCB thermal magnetic release type of capacity 63 Amps, 4 pole, 415 volts, 50 Hz, 16 KA. - 01 Nos iii) Outgoing - MCB single pole & neutral, 240 volts, 40 Amps. - 04 Nos iv) Outgoing - MCB single pole & neutral, 240 volts, 10 Amps - 01 Nos

S & F electric water heater storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostat NRV, connection piece etc. complete all as specified and as directed.

Earthing complete with galvanised steel earth plate electrode of size 60 cm x 60 cm x 6 mm thick burried directly in ground vertically to a depth of not less than 2.25 mtr below normal ground level with top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanised iron/steel earth wire 4 mm dia by means of bolts, nuts, washers and check nuts made out of galvanised iron, protected by GI pipe light grade 15 mm bore dia and connected to main control board all as shown in Electrical plate No.3 of MES SSR Part I including necessary excavation and earth work in any type of soil, salt, charcoal dust, PCC 1:2:4 type B1 in chamber, RCC 1:2:4 chamber cover with 6 mm dia MS bar at 100 mm centre to centre both ways and MS 6 mm dia hook complete all as specified and as directed.