NIT NO.002/TC/2026-27

Construction of 100 Seater Hostel For PVGT Student Including Electrification at Village Kutumsar, Block Darbha

P.A.C. 269.593105 Lacs Time Allowed :-

S.No Department Year S.O.R Item Code Descreption Unit Rate Quantity Amount Ref. Serial No. CREDIT ITEM Calc. Field (Y/N)

1 PWD 2015 PWD BLDG 1.4 Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. sqm 3.7 3600 13320.00 0 0 N

2 PWD 2015 PWD BLDG 1.2 Surface dressing of the ground including removing vegetation and making up undulations and in-equalities not exceeding 15 cms in depth/ height including disposal of rubbish upto 1.5 m lift and lead upto 50m (at least 5m away from the dressed area). Sqm 7.2 3600 25920.00 0 0 N

3 PWD 2015 PWD BLDG 1.1 Excavation for all types and sizes of foundations, trenches and drains or for any other purpose including disposal of excavated stuff upto 1.5 m lift and lead upto 50m (at least 5m away from the excavated area), including dressing and leveling of pits.

4 PWD 2015 PWD BLDG 1.1.1 In all types of soils. cum 185 1251.59 231544.00 0 0 N

5 PWD 2015 PWD BLDG 1.6 Extra for every additional lift of 1.5 m or part thereof. cum 26.5 0.68 18.00 0 0 N

6 PWD 2015 PWD BLDG 1.17 Filling from available excavated stuff (Excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering with a lead upto 50 M. and lift upto 1.5 M. cum 65 625.137 40634.00 0 0 N

7 PWD 2015 PWD BLDG 1.18 Providing and filling in plinth with sand/ Crusher dust and hard moorum under floor in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering, including dressing etc. complete. cum 371 908.372 337006.00 0 0 N

8 PWD 2015 PWD BLDG 3.1 Providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work.

9 PWD 2015 PWD BLDG 3.1.3 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size). cum 2970 264.23 784763.00 0 0 N

10 PWD 2015 PWD BLDG 3.2 Providing and laying nominal mix reinforced cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work.

3.2.1 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size). cum 4163 996.6937 4149236.00 0 0 N

11 PWD 2015 PWD BLDG 3.4 Extra for laying PCC/RCC of any grade in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth: cum 97.5 265.484 25885.00 0 0 N

12 PWD 2015 PWD BLDG 3.4 Extra for laying PCC/RCC of any grade in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth: cum 195 236.03615 46027.00 0 0 N

13 PWD 2015 PWD BLDG 3.4 Extra for laying PCC/RCC of any grade in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth: cum 292.5 18.114 5298.00 0 0 N

14 PWD 2015 PWD BLDG 3.12 Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire in foundation and plinth all complete:

3.12.1 Thermo-Mechanically treated bars FE 415 kg 54.5 117311.392 6393471.00 0 0 N

15 PWD 2015 PWD BLDG 2.1 , Providing and fixing form work including centring, shuttering, strutting staging, propping bracing etc. complete and including its removal at all levels, for:

2.1.1 Foundations, footings, bases of columns plinth beam, curtain wall in any shape and size and all type of wall below plinth level. sqm 139 1521.427 211478.00 0 0 N

16 PWD 2015 PWD BLDG 2.1.5 Columns, Pillars, Piers and likes- rectangular or square in shape sqm 297 1143.03 339480.00 0 0 N

17 PWD 2015 PWD BLDG 2.1.8 Beams, lintels, cantilevers & walls sqm 202 1786.588 360891.00 0 0 N

18 PWD 2015 PWD BLDG 2.1.13 Weather shade, chhajja, Cornices and mouldings sqm 294 123.12 36197.00 0 0 N

19 PWD 2015 PWD BLDG 2.1.15 Stair cases of all types excluding spiral and folded plate type, including risers and landings sqm 230 69.776 16048.00 0 0 N

20 PWD 2015 PWD BLDG 2.1.7 Suspended floors, roofs, access platform, balconies (plain surfaces) and shelves (cast in situ) sqm 235 1892.64 444770.00 0 0 N

21 PWD 2015 PWD BLDG 2.2 Extra for additional height every 1m or part thereof where height of staging for form work exceeds 4.0 metre with adequate bracing, propping etc at all levels, for suspended floor, roof, landing, beam and balcony. (only plan area is to be measured): sqm 40.5 33.12 1341.00 0 0 N

22 PWD 2015 PWD BLDG 2.1.4 Edge of slab, breaks in floor and walls upto 200mm. metre 34 59.388 2019.00 0 0 N

23 PWD 2015 PWD BLDG 7.5 Brick work with modular fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 4.0 in foundation and plinth in:

7.5.1 Cement Mortar 1:3 (1 cement : 3 coarse sand) cum 3641 220.712 803612.00 0 0 N

7.5.4 Cement Mortar 1:6 (1 cement : 6 coarse sand) cum 3263 813.577 2654702.00 0 0 N

24 PWD 2015 PWD BLDG 7.6 Extra for brick work in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth: cum 121 469.888 56856.00 0 0 N

25 PWD 2015 PWD BLDG 7.6 Extra for brick work in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth: cum 242 254.9685 61702.00 0 0 N

26 PWD 2015 PWD BLDG 7.6 Extra for brick work in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth: cum 363 47.0325 17073.00 0 0 N

27 PWD 2015 PWD BLDG 7.11 Half brick thick brick masonry with fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 4.0 in superstructure above plinth level upto plinth level:

7.11.2 Cement Mortar 1:4 (1 cement : 4 coarse sand) sqm 382 546 208572.00 0 0 N

28 PWD 2015 PWD BLDG 7.20 Extra for providing and placing in position hopping 25x1.60 mm or 2 Nos 6mm dia MS bars reinforcement at every third course of half brick masonry. sqm 62.5 546 34125.00 0 0 N

29 PWD 2015 PWD BLDG 9.16 Providing and fixing M.S. frames of doors, windows, ventilators and cupboards joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10cm of grade M-10 or with wooden plugs and screws or with dash fastener or rawl plugs and screws or with fixing clips or with bolts and nuts as required including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.

9.16.2 Angle-iron frames kg 73.5 3825.6 281182.00 0 0 N

30 PWD 2015 PWD BLDG 9.15 Providing and fixing M.S. grill of approved pattern made of M.S. flats or square or round bars welded to steel frame of windows etc. including applying a priming coat welded to frame with all necessary fitting complete including applying a priming of red oxide zinc chromate primer. kg 67.5 4611 311243.00 0 0 N

31 PWD 2015 PWD BLDG 9.11 Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5mm size with top and bottom rails of T-iron 40x40x6mm with 38mm steel pulleys complete with bolts, nuts, locking arrangement stoppers, handles including applying a priming coat of red oxide zinc chromate primer. sqm 3330 5.04 16783.00 0 0 N

32 PWD 2015 PWD BLDG 8.12 Providing and fixing flush door shutters, conforming to IS : 2202 (Part-I), decorative type core of block board construction with frame of first class hard wood and well matched teak ply veneering with vertical grains or cross bands and face veneers on both faces of shutters excluding hinges.

8.12.2 35 mm. thick (single leaf) sqm 2005 92.40 185262.00 0 0 N

33 PWD 2015 PWD BLDG 8.15 Extra for double leaf shutter instead of single leaf. sqm 52 25.20 1310.00 0 0 N

34 PWD 2015 PWD BLDG 8.16 Providing and fixing PVC membrane foil coated (laminated) flush door shutters, made with core of block board with frame of first class hard wood, coated with 0.30mm membrane pasted with resin using vacuam treatment process complete all but excluding hinges.

8.16.1 35 mm thick (single leaf) sqm 1982 72.24 143180.00 0 0 N

35 PWD 2015 PWD BLDG 9.13 Providing and fixing steel door/ window with M.S. sheet 1mm thick, frame of angle iron, diagonal braces of angle/ flat iron of suitable size, 3.00 mm M.S. gusset plates at junctions and corners, all necessary fittings complete including applying a priming coat of red oxide zinc chromate primer. kg 75 702.00 52650.00 0 0 N

36 PWD 2015 PWD BLDG 8.79 Providing and fixing antique/ SS finished brass sliding door bolt with necessary bolts, nuts and antique/ SS polished MS screw complete:

37 PWD 2015 PWD BLDG 8.81 Providing and fixing antique/ SS finished brass tower bolts (Barrel type) with antique/ SS polished MS screw complete:

38 PWD 2015 PWD BLDG 8.84 Providing and fixing antique/ SS finished brass handles with antique/ SS polished MS screw complete:

39 PWD 2015 PWD BLDG 8.93 Providing and fixing antique/ SS finished brass hanging door stopper with necessary antique/ SS finished MS steel screws complete. each 49.5 81.00 4010.00 0 0 N

40 PWD 2015 PWD BLDG 11.1 Providing and making 6mm thick cement plaster of mix:

11.1.2 In Cement mortar 1:4 (1 cement : 4 fine sand) sqm 87 205.02 17837.00 0 0 N

41 PWD 2015 PWD BLDG 11.2 Providing and making 12mm thick cement plaster of mix:

11.2.4 In Cement Mortar 1:6 (1 cement : 6 fine sand) sqm 91.5 3930.67 359657.00 0 0 N

42 PWD 2015 PWD BLDG 11.3 Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix:

11.3.4 In Cement Mortar 1:6 (1 cement : 6 fine sand) sqm 107 3539.79 378758.00 0 0 N

43 PWD 2015 PWD BLDG 11.9 Extra for providing and mixing water proofing materials in cement plaster work in proportion as recommended by manufacturer. kg 43.5 22.3198 971.00 0 0 N

44 PWD 2015 PWD BLDG 11.32 Providing and making 18 mm thick plain cement mortar band in cement mortar 1:4 (1 cement : 4 fine sand) per cm width:

11.32.4 Drip course metre 3.6 362.2 1304.00 0 0 N

45 PWD 2015 PWD BLDG 11.5 Neat Cement punning. sqm 33 68.46 2259.00 0 0 N

46 PWD 2015 PWD BLDG 12.3 Cement concrete flooring with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm) finished with a floating coat of neat cement.

47 PWD 2015 PWD BLDG 12.76 ammendment no. 4 Providing and laying glazed vitrified floor tiles (GVT/PGVT) with digital print of random design with water absorption less than 0.05% and conforming to IS:15622-2017 fo first quality of approve make in all colours, shade and size mentioned below (+/- 10mm) laid on 20mm thick cement mortar 1:4 (1 cement :4 course sand) including the grouting the joint with white cement and matching pigments etc. complete

12.76.1 Size 600x600mm thickness 9 to 10 mm sqm 964 1576.45 1519698.00 0 0 N

48 PWD 2015 PWD BLDG 12.74 Providing and laying rectified ceramic glazed floor tiles of size 300x300mm and above conforming to IS : 15622 of approved make, colour, shade laid on 20 mm thick Cement Mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with white cement mixed with matching pigment etc., complete.

49 PWD 2015 PWD BLDG 12.7 Providing and fixing ceramic glazed wall tiles conforming to IS : 15622 of approved make, colours, shades and size on wall and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with matching pigment complete.

50 PWD 2015 PWD BLDG 12.46 15 mm thick Table rubbed polished Granite stone slab in risers and treads of steps skirting dado and pillars laid on 12mm (Average) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) and jointed with grey cement slurry including rubbing and polishing etc. complete (single stone is to be used for risers and treads of steps and width of stone for skirting and dado shall be equal to the height of skirting & dado and length of 1.0 m).

12.46.1 Granite stone grey/pink sqm 1869 136.89 255847.00 0 0 N

51 PWD 2015 PWD BLDG 12.1 Applying cement slurry on R.C.C. slab or cement concrete work using 2.75 kg/ sqm for receiving cement concrete floor including roughening cleaning etc complete. sqm 34 1907.42 64852.00 0 0 N

52 PWD 2015 PWD BLDG 14.54 Ammendment No. 8 Providing and applying palster of paris putty over plastered wall surface including scaffolding complete

53 PWD 2015 14.54.2 More than 2mm to 4 mm thickness to make surface even and smooth in line and level sqm 103 6833.1705 703817.00 0 0 N

54 PWD 2015 PWD BLDG 14.61 Ammendment No. 8 Providing and applying synthatic oil bound distemper having VOC contant less thand 50gms/litr. Minimun two coats up to final finish to give an even shade applied 1.25 kg/10 Sqm as per relavent IS code 428:2000 (Product such as Asian Tractor synthatic distemper, Berger Bison lite, Dulux magik, Birla Opus style super smart) inclusive of providing of abro tape on edges and article and cleaning of door, window, floor, and surface as requred with all tools tackles and labuor etc. complete for the work sqm 57 3512.775 200228.00 0 0 N

55 PWD 2015 PWD BLDG 14.66 Providing and applying on exterior surface with LITE ECONOMY exterior emulsion paint of required shades to give protective water proof finish minimum three coats applied @ 1.43 lit./10Sqm as per relevent IS code 15489:2013 Type 2 class D,C (Glossy/semi Glossy finish ( product such as Asian ACE spark, Dulus promise exterior smart, Nerolac littile Master, Berger Bison lite, Nippon Superio etc.) inclusive of providing of abro tape on edges and article and cleaning of door, window, floor, and surface as requred with all tools tackles and labuor etc. complete for the work sqm 55 1607.221 88397.00 0 0 N

56 PWD 2015 PWD BLDG 14.67 Painting exterior surface with PREMIUM ACRYLIC SMOOTH exterior paint of required shade as per manufacturing specification to give protective and decorative finish including cleaning washing of surface etc. complete with:-

14.67.1 On new work (Two or more coats applied @ 1.43 liter/10 sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm sqm 70 2499.84 174989.00 0 0 N

57 PWD 2015 PWD BLDG 18.1 Providing and fixing water closet squatting pan (Indian type W.C. pan ), 100mm sand cast Iron P or S trap, 10 litre low level P.V.C. flushing cistern (same colour) conforming to IS : 7231, with flush bend and other fittings and fixtures complete including cutting and making good the walls and floors wherever required :

18.1.3 White Orissa pattern W.C. pan of size 580x440 mm each 2899 19 55081.00 0 0 N

58 PWD 2015 PWD BLDG 18.4 Providing and fixing vitreous china water closet (European type W.C. pan) with white ISI marked plastic seat and lid, 10 litre low level white P.V.C. flushing cistern (same colour), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required :

18.4.1 White pedestal type each 2882 4 11528.00 0 0 N

59 PWD 2015 PWD BLDG 18.13 Providing and fixing white vitreous china urinal basin with waste fitting as per IS : 2556, and other couplings in C.P. brass complete:

18.13.1 Flat back half stall urinal of size 460x380x250mm each 1776 12 21312.00 0 0 N

60 PWD 2015 PWD BLDG 18.20 Providing and fixing stainless steel AISI-304(18/8) wash basin with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of brackets, cutting and making good the walls wherever required

61 PWD 2015 PWD BLDG 18.23 Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug 40mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete including painting of brackets, cutting and making good the wall required :

62 PWD 2015 PWD BLDG 18.25 Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.

63 PWD 2015 PWD BLDG 18.27 Providing and fixing cast iron grating for gully trap.

18.27.1 100x100mm square or round each 30 13 390.00 0 0 N

64 PWD 2015 PWD BLDG 18.77 Providing and fixing on wall face UV stabilized Unplasticised - PVC moulded fittings/ accessories having 3.2mm wall thickness for Rigid PVC pipes conforming to IS : 13592 (heavy) jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.

18.77.1 Tee/ Tee with door/ Bend 45°/ Bend 90°

18.77.3 Vent covel

18.77.5 "P" trap 110mmx110mm long each 227 26 5902.00 0 0 N

18.77.6 Nahani trap 110x75mm each 90.5 46 4163.00 0 0 N

18.77.7 Multi floor trap 110 each 122 20 2440.00 0 0 N

65 PWD 2015 PWD BLDG 18.76 Providing and fixing on wall face or under floor UV stabilized Unplasticised Rigid PVC pipes (single socketed) having 3.2mm wall thickness conforming to IS : 13592 (4kg/sqcm) including required couplers, jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion etc complete.

18.76.3 150 mm dia pipe. metre 440 80 35200.00 N

66 PWD 2015 PWD BLDG 19.15 Providing and fixing stainless steel drain jali of approved make/quality. each 51 80 4080.00 0 0 N

67 PWD 2015 PWD BLDG 19.42 Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank litre 7.3 6000 43800.00 0 0 N

68 PWD 2015 PWD BLDG 19.5 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. CONCEALED WORK including cutting chases and making good the walls etc.,

19.5.2 20 mm nominal outer dia .Pipes. metre 167 200 33400.00 0 0 N

19.5.1 15 mm nominal outer dia .Pipes. metre 133 80 10640.00 0 0 N

69 PWD 2015 PWD BLDG 19.6 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This included jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete

19.6.3 25 mm nominal outer dia pipes metre 165 400 66000.00 0 0 N

19.6.5 40 mm nominal outer dia pipes metre 300 50 15000.00 0 0 N

70 PWD 2015 PWD BLDG 19.14 Providing and fixing 15 mm nominal bore C.P. brass fittings of approved make and conforming to IS:8931 including C.P. brass extension if required:

19.14.3 Long body bib cock (500 grams) each 426 90 38340.00 0 0 N

19.14.6 Stop cock (concealed) (600 grams) each 494 60 29640.00 0 0 N

19.14.14 Soap dish plate each 163 26 4238.00 0 0 N

19.14.16 Towel rail (600mm long x 20mm dia) each 338 26 8788.00 0 0 N

19.14.6 Stop cock (concealed) (600 grams) each 494 12 5928.00 0 0 N

71 PWD 2015 PWD BLDG 19.17 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :

19.17.3 25 mm nominal bore meter 432 12 5184.00 0 0 N

72 PWD 2015 PWD BLDG 20.28 Providing and constructing brick masonry chamber for underground pipe and and bends with well burnt modular clay bricks crushing strength not less than 35kg/cm2 in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) R.C.C. top slab with 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design :

20.28.1 Inside dimensions 455x610 mm and 45 cm deep for single pipe line : each 3796 20 75920.00 0 0 N

20.28.2 Inside dimensions 500x700 mm and 45 cm deep for pipe line with one or two inlets : each 4357 4 17428.00 0 0 N

73 PWD 2015 PWD BLDG 20.31 Providing and constructing soak pit 1.20x1.20x1.20m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design. each 1709 4 6836.00 0 0 N

74 PWD 2015 PWD BLDG 14.71 Providing and applying stain/matt finish enamal paint minimun two coat in all surface applying @0.75 litr./10Sqm up to requred finish as per relevent IS code 2932:2013 fo product such as ( Asian apcolite premium enamal, dulux promise primium enamal, Nerolac synthatic enamal, Opus prime enamal) inclusive of providing of abro tape on edges and article and cleaning of door, window, floor, and surface as requred with all tools tackles and labuor etc. complete for the work sqm 133 529.35 70404.00 0 0 N

75 PWD 2015 PWD BLDG 21.17 Carrying out the resistivity survey by VES method using Schlumberger configuration for locating the proper spot for drilling of tube well within the selected habitation, including photography, interpretation of resistivity data and submission of report in the desired format along with resistivity readings, necessary graph and photographs. (only successful point is payable) point 1502 1 1502.00 0 0 N

76 PWD 2015 PWD BLDG 21.1 Boring/drilling bore well perfectly vertical for the specified depth suitable to receive required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer–in-charge upto 90 metre depth below ground level.

21.1.1 All types of soil

77 PWD 2015 PWD BLDG 21.1.2 Rocky strata including Boulders.

78 PWD 2015 PWD BLDG 21.2 Boring/drilling bore well perfectly vertical for the specified depth suitable to receive required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer–in-charge beyond 90 metre & upto 150 metre depth below ground level.

21.2.2 Rocky strata including Boulders.

79 PWD 2015 PWD BLDG 21.5 Supplying, assembling, lowering and fixing in vertical position in bore well, ISI marked G.I. casing pipe (Plain) medium class in 4 to 7 meters length one end fitted with socket as per IS: 1239 (Part-1&Part-2) 1992 with IVth revision (Up-to-date amendments), of reputed & approved make, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer- in-charge.

21.5.3 150 mm nominal dia metre 1304 90 117360.00 0 0 N

80 PWD 2015 PWD BLDG 21.4 Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) slotted pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer- in-charge.

21.4.4 200 mm nominal size dia. metre 979 20.50 20070.00 0 0 N

81 PWD 2015 PWD BLDG 21.11 Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for bore well of:

82 PWD 2015 PWD BLDG 21.12 Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tube well as per IS: 2800 (part I), including necessary bolts & nuts of required size complete.

83 PWD 2015 PWD BLDG 21.13 Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tube well as per IS:2800 (part I).

84 PWD 2015 PWD BLDG 21.18 Providing and fixing filter of minimum 100 litre capacity for roof top rain water harvesting through tube well consisting of two layered HDPE tank with five layers (each layers of minimum 100 mm) consist of coarse sand, 4mm, 6mm, 8mm & 12 mm gravels with stainless steel wire mesh fixed between each layer with suitable length and sufficient numbers of 110 mm dia PVC pipe pieces in the bottom of tank to support the above layer including fixing of inlet and out let P.V.C. pipe of required diameter upto 2 metre length on each side, Cement Concrete plateform of required size complete as directed by Engineer in charge. (excluding cost of tubewell and inlet and outlet pipe beyond 2 metre) litre 18.5 1000.00 18500.00 0 0 N

85 PWD 2015 PWD BLDG 21.19 Providing and fixing 80-100 mm dia PVC ball valve for inlet/ outlet of rain water harvesting pipe and filter. each 644 2.00 1288.00 0 0 N

86 PWD 2015 PWD BLDG 20.5 Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : meter 353 90 31770.00 0 0 N

87 PWD 2015 PWD BLDG 19.51 Constructing masonry Chamber 60x60x75 cm, inside with modular well burnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for fire hydrants, with C.I. surface box 350x350 mm top and 165 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand:10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : each 4356 4.00 17424.00 0 0 N

88 PWD 2015 PWD ROAD 3.2 Excavation in Soil (by Mechanical Means.) Excavation for roadway in soil using mechanical means including loading in tipper for carrying of cut earth to embankment site and unloading with all lifts and lead upto 1000 meters as per relevant clauses of section 300. cum 103 206.793 21300.00 0 0 N

89 PWD 2015 PWD ROAD 4.2 Drainage Layer of Granular Sub-Base for RIGID PAVEMENT

2015 Construction of granular sub-base by providing graded granular material mechanicaly mixed in plant confirming to required grading mentioned in Appendix-VI and Clause 5.7.3.9 of IRC:58-2015, carriage of mixed material to work site, spreading in spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401.

By Plant mix method (with mechanically crushed stone only)

A For Sub-Base as per AASTHTO 93 : Grading 6 of Table VI-I cum 1494 103.3965 154474.00 0 0 N

90 PWD 2015 PWD ROAD 6.1 Dry Lean Cement Concrete Sub-base as per IRC:SP-49 (Construction of dry lean cement concrete Sub-base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 26.5 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 150 kg/cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 tonnes vibratory roller, finishing and curing as per clause 601.) cum 2562 95.7375 245279.00 0 0 N

91 PWD 2015 PWD ROAD 6.3 Providing and laying cement concrete for plain concrete/ reinforced concrete i/c form work, shuttering complete in as per drawings and specifications.( For Village roads)

92 PWD 2015 PWD ROAD 4.12 Granular Shoulders (Construction of granular shoulder as per clause 408 at top 150mm of earthen shoulder shall be well graded mix of at least 30% of granular sub-base material of grading –III as per clause 401 and moorum/gravel or soil and combination having soaked CBR value of not less than 30% The granular layer shall be compacted to at least 98% of mix dry density of material as determined as per IS:2720 (part-B) cum 493 178.71 88104.00 0 0 N

93 PWD ELECT 2020 1.7 Wiring for light/ fan/ exhaust fan / call bell point with 3x1.5 sqmm FRLS PVC insulated stranded copper conductor wire for phase, neutral and earth in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) with 5/6 amp modular switch, modular base and cover plate, suitable size G.I. box as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5) 1.7.1 Short Point Point 266 42 11172.00 0 0 N

94 PWD ELECT 2020 1.7.2 Medium Point Point 424 175 74200.00 0 0 N

95 PWD ELECT 2020 1.7.3 Long Point Point 588 246 144648.00 0 0 N

96 PWD ELECT 2020 1.2 Wiring for twin control light point with 3x1.5 sqmm FRLS PVC insulated stranded copper conductor wire for phase, neutral and earth in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm), with 5/6 amp piano type switch, phenolic laminated sheet, suitable size M.S. box etc as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5) Point 333 12 3996.00 0 0 N

97 PWD ELECT 2020 1.9 Extra for providing and fixing light plug point on board in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) point wiring with modular type 3 pin 5/6 amp socket outlet and 5/6 amp switch including cost of base and cover plate and G. I. box etc. as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5) Point 216 130 28080.00 0 0 N

98 PWD ELECT 2020 1.10 Wiring for light plug point with 3x2.5 sq mm FRLS PVC insulated stranded copper conductor wire for phase, neutral and earth in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) along with modular type 6 Amp switch and 3 pin 6 amps socket outlet with modular base and cover plate, suitable size G.I. box, earthing the switch box and socket outlet with same size wire etc. as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5) 1.10.2 Medium Point Point 659 16 10544.00 0 0 N

99 PWD ELECT 2020 1.10.3 Long Point Point 922 13 11986.00 0 0 N

100 PWD ELECT 2020 1.10.4 Extra Long Point I Point 1302 15 19530.00 0 0 N

101 PWD ELECT 2020 1.10.5 Extra Long Point II Point 1657 15 24855.00 0 0 N

102 PWD ELECT 2020 1.11 Wiring for power plug point with 3x4 sq mm FRLS PVC insulated stranded copper conductor wire for phase, neutral and earth in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) along with modular type 16 Amp switch and 6 pin 16 amps socket outlet with modular base and cover plate, suitable size G.I. box, earthing the switch box and socket outlet with same size wire etc. as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5) 1.11.2 Medium Point Point 942 2 1884.00 0 0 N

103 PWD ELECT 2020 1.11.3 Long Point Point 1350 2 2700.00 0 0 N

104 PWD ELECT 2020 1.11.4 Extra Long Point I Point 1807 3 5421.00 0 0 N

105 PWD ELECT 2020 1.11.5 Extra Long Point II Point 2315 5 11575.00 0 0 N

106 PWD ELECT 2020 1.11.6 Extra Long Point III Point 2825 5 14125.00 0 0 N

107 PWD ELECT 2020 1.13 Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, wire in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5) 1.13.1 3 X 1.5 sq. mm in 20mm conduit Metre 92 155 14260.00 0 0 N

108 PWD ELECT 2020 1.13.2 3 X 2.5 sq. mm in 20mm conduit Metre 111 412 45732.00 0 0 N

109 PWD ELECT 2020 1.13.3 6 X 2.5 sq. mm in 25mm conduit Metre 172 305 52460.00 0 0 N

110 PWD ELECT 2020 1.13.4 9 X 2.5 sq. mm in 32mm conduit Metre 238 195 46410.00 0 0 N

111 PWD ELECT 2020 1.13.6 3 X 4 sq. mm in 25mm conduit Metre 145 65 9425.00 0 0 N

112 PWD ELECT 2020 5.4 Supplying and fixing following modular switch, socket, other accessories on the existing modular plate & switch box including connections but excluding modular plate etc. as per specification. 5.4.8 Fan regulator (one module size) electronic stepped type moving all rounds Each 186 142 26412.00

113 PWD ELECT 2020 5.4.22 Batten/ angle holder Each 41 75 3075.00 0 0 N

114 PWD ELECT 2020 5.4.23 Blanking plate Each 28 110 3080.00 0 0 N

115 PWD ELECT 2020 6.1 Supplying, installation, testing and commissioning of following sizes ceiling fan including wiring the down rods of standard length up to 30 cm with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, earthing etc. complete as required. P.F. should be greater than 0.9, with BEE Star rating from 3 star and above, IS: 374:2019 including all amendments. 6.1.3 1200 mm sweep Each 1697 142 240974.00 0 0 N

116 PWD ELECT 2020 6.6 Supplying, installation, testing and commissioning of following sizes heavy duty (continuous running) 1400 rpm exhaust fan in existing opening in wall including earthing etc. complete as per specification. P.F. should be greater than 0.9 6.6.2 380 mm sweep Each 2858 21.00 60018.00 0 0 N

117 PWD ELECT 2020 6.11 Supplying and fixing following sizes of down rod of 15/20mm dia M.S. pipe of thickness 2 mm to ceiling fan including painting with matching colour etc. as per specification. 40 142.00 5680.00 0 0 N

118 PWD ELECT 2020 6.17 Supplying, fixing, testing and commissioning of following LED lamps with inbuilt electronic driver heat sink and all other accessories in existing holder/ luminaries as per specification and P.F. should be greater than 0.9. LED chip efficacy ratio ≥ 100 lumens /watt. 6.17.6 15 Watt Each 249 75 18675.00 0 0 N

119 PWD ELECT 2020 6.19 Supplying, installation, testing and commissioning of following LED tube light fitting including batten with Electronic Driver Heat sink Capacitor complete with all other accessories on surface/ in false ceiling, including connection, earthing etc complete as per specification and IP20, P.F. should be greater than 0.9. LED chip efficacy ratio ≥ 100 lumens /watt. 6.19.3 18/20 watt {4 feet} Each 443 221.00 97903.00 0 0 N

120 PWD ELECT 2020 6.28 Supplying, installation, testing and commissioning of following 230/250 volts LED street light fitting with all accessories like driver, heat sink made of die cast aluminium with IP 66 protection and 15 KV surge protection on pole bracket, including connection, earthing, Separate housing for driver etc complete as per specification and P.F. should be greater than 0.9. LED chip efficacy ratio ≥ 120 lumens /watt. 6.28.8 90 watt Each 5531 4.00 22124.00 0 0 N

121 PWD ELECT 2020 9.5 Supplying and fixing on surface/ recess vertical type following way, 415 volts, TPN MCB distribution board of sheet steel phosphatized and powder painted, with 200 amps tinned copper busbar, common neutral link, earth bar, din bar, detachable gland/ knock out plate, including interconnections, earthing etc. as per specification. (But without MCB/RCCB/Isolator) (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) 9.5.4 4 way (4 + 12), Double door Each 4149 4.00 16596.00 0 0 N

122 PWD ELECT 2020 9.5.5 8 way (4 + 24), Double door Each 5138 4.00 20552.00 0 0 N

123 PWD ELECT 2020 9.10 Supplying and fixing SP MCB, 240 volts, 'B' curve, suitable for lighting and other loads in the existing MCB DB complete with connections, testing and commissioning etc. as per specification. 9.10.1 6 amps to 32 amps Each 151 144.00 21744.00 0 0 N

124 PWD ELECT 2020 9.17 Supplying and fixing TP&N MCB, 440 volts, 'D' curve, suitable for inductive/ motor load in the existing MCB DB complete with connections, testing and commissioning etc. as per specification. 9.17.3 40 amps Each 1351 4 5404.00 0 0 N

126 PWD ELECT 2020 9.23 Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as per specification. Each 7 10 70.00 0 0 N

127 PWD ELECT 2020 12.3 Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe, with charcoal and salt as per specification and IS Code 3043: 1987(R 2016) Set 6209 1 6209.00 0 0 N

128 PWD ELECT 2020 12.4 Supplying and laying 8 SWG copper wire at 0.50 metre below ground level for conductor earth electrode, including soldering etc. as per specification. Metre 77 15.00 1155.00 0 0 N

129 PWD ELECT 2020 12.17 Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as per specification. Metre 38 315 11970.00 0 0 N

130 PWD ELECT 2020 14.2 Supplying and laying HDPE pipe of 4kg/Sqcm in ground below road, path etc at a depth not less than 40 cm and upto 90 cm including excavation, dismantling of road if required and refilling the trench with excavated material, ramming and making the surface good etc. as per specification. 14.2.3 90 mm outer dia Metre 245 150 36750.00 0 0 N

131 PWD ELECT 2020 15.1 Supplying and laying following sizes one number FRLS PVC insulated/XLPE, PVC sheathed, steel armoured, aluminium conductor power cable of 1.1 KV grade direct in ground at a depth not less than 40 cm and upto 90 cm including excavtion, sand cushioning, protective covering and refilling the trench etc as per specification, IS: 1554 (1988, Part 1) / IS: 7098 (1988, Part 1). 15.1.14 3.5 x 70 sq. mm. Metre 451 85 38335.00 0 0 N

133 PWD ELECT 2020 30.1 Earth work in all type soil except soft rock / hard rock with all lead and 1.5 metre lift, dressing, stacking excavated strata including refilling of excavated soil in trench / pit to ground level complete as per specification. cum 168 4.50 756.00 0 0 N

134 PWD ELECT 2020 7.19 Fabrication, supply, installation, testing and commissioning of cubicle type compartmentalized wall/ floor mounted power cum control panel board of specified size and following depth made out of not less than 2 mm thick CRCA MS powder coated sheet with suitable size compartments for bus bars, switchgears and necessary cutouts for voltmeters, ammeters etc as per specifications including powder coating painting but without busbars, switchgears and other accessories etc complete as per specification. 7.19.1 Upto 300 mm deep sqm 6818 4.25 28976.50 0 0 N

135 PWD ELECT 2020 7.21 Supply, installation, testing and commissioning of 4 pole (3 phase + neutral) copper (electric grade) bus bars in existing cubicle type compartmentalized wall/ floor mounted panel board along with suitable size and shape insulators, necessary bolts and nuts etc complete as per specification. 7.21.2 200 amp (25x5mm) Metre 2382 12.00 28584.00 0 0 N

136 PWD ELECT 2020 9.1 Providing and fixing following rating and breaking capacity MCCB in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as per specification, IS/ IEC: 60947-2 and Ics = 100 % Icu. 9.1.39 4 pole MCCB, 100A, Adjustable Microprocessor Release, 35KA Each 14164 10.00 141640.00 0 0 N

137 PWD ELECT 2020 9.1.49 4 pole MCCB, 250A, Adjustable Microprocessor Release, 50KA Each 22400 1.00 22400.00 0 0 N

138 PWD ELECT 2020 10.15 Providing and fixing following rating current transformer in existing cubical panel including, connections, testing and commissioning etc. as per specification. 10.15.3 200/5 amps Each 347 3.00 1041.00 0 0 N

139 PWD ELECT 2020 10.17 Providing and fixing penal mounting 230 volt LED type indicating lamp in existing cubical panel including, connections, testing and commissioning etc. as per specification. Each 94 13.00 1222.00 0 0 N

140 PWD ELECT 2020 10.19 Providing and fixing penal mounting digital type ammeter of size 100x100 (NS) in existing cubical panel including, connections, testing and commissioning etc. as per specification Each 975 1.00 975.00 0 0 N

141 PWD ELECT 2020 10.20 Providing and fixing penal mounting 0-500 volt voltmeter of size 100x100 (NS) in existing cubical panel including, connections, testing and commissioning etc. as per specification. 10.20.2 Digital type Each 835 1 835.00 0 0 N

142 PWD ELECT 2020 3.11 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, multi strand wire in the existing surface/ concealed, FRLS PVC conduit / PVC casing caping as per specification and IS: 694 (2010) 57 90 5130.00 0 0 N

143 PWD ELECT 2020 6.28 Supplying, installation, testing and commissioning of following 230/250 volts LED street light fitting with all accessories like driver, heat sink made of die cast aluminium with IP 66 protection and 15 KV surge protection on pole bracket, including connection, earthing, Separate housing for driver etc complete as per specification and P.F. should be greater than 0.9. LED chip efficacy ratio ≥ 120 lumens /watt. 6.28.9 120 watt Each 6844 10 68440.00 0 0 N

144 PWD ELECT 2020 9.11 Supplying and fixing SP MCB, 240 volts, 'C' curve, suitable for inductive load in the existing MCB DB complete with connections, testing and commissioning etc. as per specification. 9.11.2 6 amps to 32 amps Each 148 10 1480.00 0 0 N

145 PWD ELECT 2020 12.2 Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe, with charcoal and salt as per specification and IS Code 3043: 1987(R 2016) Set 3734 1 3734.00 0 0 N

146 PWD ELECT 2020 12.12 Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including soldering, excavation and refilling the trench etc. as per specification. Metre 36 150 5400.00 0 0 N

147 PWD ELECT 2020 14.1 Supplying and laying ISI marked double wall HDPE pipe (IS 14930 Part II) having corrugation on the outer wall and plan surface on inner wall in ground below road, path etc at a depth not less than 40 cm and upto 90 cm including excavation, dismantling of road if required and refilling the trench with excavated material, ramming and making the surface good etc. as per specification. 14.1.1 63 mm outer dia and 50 mm Inner dia Metre 184 175 32200.00 0 0 N

148 PWD ELECT 2020 15.1 Supplying and laying following sizes one number FRLS PVC insulated/XLPE, PVC sheathed, steel armoured, aluminium conductor power cable of 1.1 KV grade direct in ground at a depth not less than 40 cm and upto 90 cm including excavtion, sand cushioning, protective covering and refilling the trench etc as per specification, IS: 1554 (1988, Part 1) / IS: 7098 (1988, Part 1). 15.1.24 4 x 25 sq. mm. Metre 321 65 20865.00 0 0 N

150 PWD ELECT 2020 15.28 Supplying, fixing and cramping suitable size and all type aluminium ferule/ lugs to following size 1.1 KV grade power cable core / lead, pressed with high pressure cramping tool including connection to switch gear/ MCCB etc as per specification. . 15.28.3 16 sq. mm Each 19 128 2432.00 0 0 N

152 PWD ELECT 2020 19.7 Supply of hot dipped galvanized (in single dip to minimum 75 micron) octogonal pole made of 3mm thick steel grade E-350 sheet having window and flush cover with locking arrangement at suitable height from base for cable termination block, pole suitably reinforced with welded steel section at window cut section to make the strength of pole unaffected, with following minimum specifications with 4 way terminal connector including 3mm thick anchor plate, 4 nos 20mm dia foundation bolts of EN8 grade, and as per IS 2062 & BS EN: 10025. (designed for wind speed upto 180km/hr, IS: 875 Part 3) 19.7.3 8 metre high, dia 135mm at bottom and 90mm at top, base plate size 225x225x16mm, foundation bolts 750mm long Each 11853 10 118530.00 0 0 N

153 PWD ELECT 2020 19.9 Supply and fixing following street light pole bracket on existing pole made out of 50 mm dia MS "B" class pipe welded to 300 mm long MS pole canopy of suitable dia at a angle of 102.50 including having MS triangular stiffner of size 150 X 50 X 5 mm thick, making arrangement for tightening the bracket with pole by providing suitable size heavy duty nuts and bolts in canopy, painting with one coat of approved steel primer etc. as per specification. 19.9.3 Single Over Hang 1.50 metre Long Each 1233 10 12330.00 0 0 N

154 PWD ELECT 2020 19.11 Erection of GI octogonal/ tubular/conical pole on existing cement concrete foundation having grouted bolts and nuts, aligning in true vertical position as per specification. 19.11.6 8 metre high Each 924 10 9240.00 0 0 N

155 PWD ELECT 2020 19.12 Designing and providing suitable RCC foundation in Cement Concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) for 3 mere to 12 metre high GI octagonal pole including steel reinforcement form work, embeding 2 nos 50mm dia PVC pipe for cable entry in each foundation, excavation disposal of surplus soil and curing etc. as per specification. cum 5219 5 26095.00 0 0 N

156 PWD ELECT 2020 3.14 Supplying and drawing UTP 4 pair Cat 6 LAN wire in existing surface/ concealed Steel/FRLS PVC conduit as per specification metre 19 750 14250.00 0 0 N

157 PWD ELECT 2020 2.15 Supplying and fixing of following sizes FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) along with accessories in surface complete as per specification and IS: 9537 (2000 Part 5) 2.15.1 20 mm Metre 32 450 14400.00 0 0 N

159 PWD ELECT 2020 27.11 Supplying , installation , testing and commissioning of 4 MP Bullet Camera weather & dust proof IP based Fixed Lens day/night Camera (IP67 , IK 10) , 1/3” 4MP PS CMOS Image Sensor, H.265 and H.264 triple-stream encoding, WDR(120dB), Day/Night Support, UL ,CE FCC Certified as per the specifications. Each 6353 8 50824.00 0 0 N

160 PWD ELECT 2020 27.18 Supplying , installation , testing and commissioning of 8 Channel NVR 2 Sata port Up to 16 channel IP camera input , Max 200Mbps incoming bandwidth ,Smart H.265+/H.265/Smart H.264+/H.264 dual codec decoding , Up to 8MP resolution preview and playback , Support 2 SATA HDDs up to 6 TB each, 2 USB(1 USB3.0, 1 USB2.0) , 1 HDMI / 1 VGA simultaneous video output ,ONVIF Version 2.4 conformance , Alarm In / out 4/2 , Two way talk 1 Channel Input, 1 Channel Output RCA , 1 RJ-45 port (10/100/1000Mbps) as per the specifications. Each 11194 1 11194.00 0 0 N

161 PWD ELECT 2020 27.25 Supplying , installation , testing and commissioning of 4 Port POE Switch 10/100 4 Port PoE with 2 10/100 Mbps Uplink ,Power Budget 60 Watt , Max 30 watt per port as per the specifications. Each 2773 2 5546.00 0 0 N

162 PWD ELECT 2020 27.37 Supplying , installation , testing and commissioning of 4 TB Surveillance Hard disk drive Complete as required Each 9565 1 9565.00 0 0 N

163 PWD ELECT 2020 27.44 Supplying , installation , testing and commissioning of 4U Indoor Rack Wallmount 4U 400D With Front Glass Door Lock & Key 550 4U - (fan; cable manager; PDU) complete as required. Each 3132 1 3132.00 0 0 N

164 PWD ELECT 2020 27.49 Supplying, installation, testing and commissioing of following size LED Monitor, table/wall mount with inbuild speaker minimum 5Wx2,with minimum 1 No of HDMI and USB port including remote control, connecting cable, batteries, and all accessories, connection etc complete as per specification. 27.49.1 32 inch Each 21896 1 21896.00 0 0 N

165 PWD ELECT 2020 27.73 Supply, installation and testing for HDMI cable. Metre 462 10 4620.00 0 0 N

166 PWD ELECT 2020 24.23 Supplying, installation, testing and commissiong of following size drinking water cooler storage type ISI marked, eco friendly non CFC refrigarant, water tank and cooler cabinet sheet material- stainless steel {grade AISI 304} with thickness>= 0.8 mm, with PUF insulation including all accessories connection etc complete as per specification. 24.23.4 150/300 Ltrs/hr Each 62565 1 62565.00 0 0 N

167 PWD ELECT 2020 24.24 Supplying, installation, testing and commissiong of following capacity of RO purification system with UF/UV/TDS controler and UV lamp {IS 14724 Ultra voilet disinfection} and minimum three stage purification, automatic on/off, output water conferming standard IS 10500 with inbuild storage tank including all accessories connection etc complete as per specification. 25.24.2 50 Ltrs/hr output capacity Each 39021 1 39021.00 0 0 N

Note:- The S.O.R. of Building with effected from. 01//01/2015 and amended till date 14/08/2025

The S.O.R. of Eletrification with effected from. 01/06/2020 and amended till date 17/07/2025