SPECIAL REPAIRS TO OR LINES INSIDE COLLEGE AREA AT DSSC WELLINGTON

Amount

Demolition of floor hearth or wall tiling including cement mortor bedding and backing cutting out broken tiles in cluding removring rubbish off the premises i.e., outside MD land complete all as specified and as directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc laid in any mortar and removing rebbish outside MD land complete all as specified and as directed.

Demolition of cement concrete (unreinforced ) of any description and in any postion not otherwise spcifically provided etc (below or above ground level)/sunken floors / roof pading etc and removing debris out side MD line complete all as spcified and as directed.

Taking down door/ window chowkats or frame with shutter (without taking off shutters from the frames) not exc. 1.5 Sqm each complete all as specified and as directed.

Taking down door/window chowkats or frame with shutter (without taking off shutters from the frames) exc. 1.5 Sqm & n. exc. 4.00 Sqm each complete all as specified and as directed.

Taking down shutter of any descripton or in any position area exc 1Sqm but n.exc 2 Sqm

Taking down cement or cement lime plaster of any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified and as directed.

M&L for non skid ceramic tiles7 to 8 mm thick (square/rectangle) area of each tile exc0.18sqm but not exc 0.36sqm, in floors or skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:4 complete all as specified.Make : Rak Ceramics/Kajaria/Somay

Description all as per item No 8 above but set and jointed in neat cement slurry and pointed in coloured cement to match as in vertical surfaces of dado/skirting set in 10mm thick CM 1:3 complete all as specified

M&L for non skid ceramic tiles7 to 8 mm thick (square/rectangle) area of each tile exc 0.06sqm but not exc 0.18 sqm, in floors or skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:4 complete all as specified.Make : Rak Ceramics/Kajaria/Somay

M&L for coloured glazed ceramic tiles of size 300x600x7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match as in vertical surfaces of dado/skirting set in 10mm thick CM 1:3 complete all as specified.Make :Rak Ceramics/Kajaria/Somay

M& L for 20-25 mm thick machine cut kota stone slab in single piece for full length of step as in treads of staircase and in flooring, edge moulding as in steps and three rows of 4mm wide and 5mm deep in each landing/thread and incl 20mm thick cement screed base laid in cm 1:6 and jointed with grey cement slurry mixed with pigment to match the shade including rubbing, polishing to mirror finish and rounding to edges etc. complete all as specified and as directed.

Description all as per item No 12 above, but 18-20 mm thick but in skirting/Riser incl 10mm thick screed in CM 1:4 complete all as specified

Material and labour for providing cement concrete type B-0, 1:2:4 (12.5mm graded agregate) avg 40mm thick in floors,roofs etc (for roof padding) finished even and fair all as specified and as directed.

Rendering 10mm thick cement screed in cement mortar 1:3 mixed with liquid water proofing compound FOSROC's complast 421 IC @ 130ml per bag of cement including a bonding coat of FOSROC's Nito bond AR cement slurry (or) Equivalent as per manufactures instruction on roofcslab/ floor complete all as specified. Note: Lliquid water proofing compound are measure seperately.

M&L for laying 3mm thick APP modified water proofing membrane weighing not less than 3.6 Kg/Sqm, reinforced with non woven polyster matt black finished weighing not less than 100 gm/Sqm having softening point not less than 140 degree celsius longitudinal tensile strength not less than 300 N/Sqm, side lap & end lap 15cm over a coat of bitumen primer @ 0.20 Kg/Sqm and finished with aluminum paint @ 0.10 Ltr/Sqm all as per manufactures instruction and as directed by Engr-in charge. Note : The work shall be carried out by authorised applicators of manufactures.

Meterial and labour for Providing, cement concrete type B-0 ,1;2:4 usinf 12.5mm graded stone aggregate in roof kerbs ,koving for chajja or mud stops, rounded or chamfered on edges etc all as directed by the Engr In charge

S & F in repairs for White/Coloured UPVC partition complete all as per manufacturer's instructions and following specifications all as directed:- (i) UPVC partition frame shall be made of material confirming to IS 10151 of extruded UPVC section having over all dimension of 65 x 55 having wall thickness 2mm ± 0.2mm. (ii) Corners of frame shall be jointed by MS galvanized brackets mitred and plastic welded. (iii) The profiles should be single chamber system which shall provide high insulation properties. (iv) Glazing shall be 6mm thick frosted glass fixed in frames with appropriate beading as per manufacturer's specification. (v) The bottom portion of partition for 1 m height and above 2.1m hight will be provided with UPVC hollow board not less than 6 mm thick. (vi) All the fittings shall be provided with using self tapping screws. Note: The entire fixing shall be done as per manufacturer's instructions and specification and as directed by Engr-in-Charge. Make: Madhu Industries / AMD overseas Ltd/ Gadli Industries/ Simta Astrix.

M & L for UPVC ventilator with The profile for costruction of UPVC ventilator frame will be of overall size 60x58 mm with wall thickness 2.7 + or - 0.2 mm extruded sections. The corners will be plastic welded.The hinge side vertical outer frame shall be reinforced with galvanized channel of wall thickness 1.2 mm. The ventilator will be fixed to walls using 8 mm dia 80 mm dia MS screws minimium 2 nos on each sicde. The 3 nos of pinned glass will be placed in slots provided in ventilator. Glazing: The ventilator will be glazed with 5 mm thick pinhead glass. Note: The entire fixing will be done as per manufactures instructions and specification and as directed by Engg in charge. (II) The unit rate quoted by contractor includes cost of glass/wire netting and all other connected accessories. Net opening will be measured for payment purpose. Make: Madhu Industries / AMD overseas Ltd/ Gadli Industries/ Simta Astrix.

Supply and fix Supply and fixing factory made uPVC white colour Two track four panels sliding glazed door made of (big series) frame 67 x 50 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension. (Area of door above 8.00 sqm upto 10.00 sqm) comprising of uPVC multi-chambered frame, with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension uPVC extruded glazing beads, uPVC extruded interlock and uPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle with key on one side of extreme panels along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) cresent lock (if required), stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg), G.l fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.all as specified and as directed.Make: Madhu Industries / AMD overseas Ltd/ Gadli Industries/ Simta Astrix.

Material and labour for Rendering in Cement Mortar 1:6, 15mm thick on stone masonry or other than fair faces of brick work wall surfaces, finished even and smooth without using extra cement complete all as specified and as directed..

Material and labour for rendering 20mm thick in Cement Mortar 1:4 mixed with liquid water proofing compound as per manufacturers' instructions on stone masonry surfaces of wall, finished even and smooth without using extra cement complete all as specified and as directed. Note: Liquid water proofing compound shall be measured and paid separately.

Material and labour for Rendering in Cement Mortar 1:3, 5mm thick on stone masonry or other than fair faces of brick work wall surfaces, finished even and smooth without using extra cement complete all as specified and as directed.

Supply and fix Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing

Supply and fix Factory made solid panel face door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded wood grain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and wood grain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of wood grain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing.

M&L for 2nd class hard wood (Sal / Hollock) factory made glazed and skeleton shutters 35 mm thick, open rebated and prepared to receive glass or gauge,etc. (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing gauge sizes of members of shutters as specified in SSR Part-I Section-8, clause 8.24 (a) for door shutter supplying and fitted to chowkats, complete all as specified and as directed.

S&F second class hard wood plain, solid straight chowkats/hand rails and frames wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and as directed.

S&F for 2nd class hard wood factory made plain framed panalled door shutter 35 mm thick (any number of panel) with veneered particle board medium density, wood particl board with commercial face venners. complete all as specified and directed

S&F Mild steel butt hinges 100mm long, medium weight, cold rolled.

S&F MS Butt hinges medium weight cold rolled & fixed 75 mm long

S&F 150mm, extruded aluminium alloy handles, fabricated type, anodised complete.

S&F 125mm, extruded aluminium alloy handles, fabricated type, anodised complete.

S&F 150 mm long, Aluminum anodised barrel tower bolts, of extruded section complete as specified and as directed.

S&F 125 mm long, Aluminum anodised barrel tower bolts, of extruded section complete as specified and as directed.

S&F 300mm long, Aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed complete as specified and as directed.

M&L for preparation of new wooden surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

S&F figured glass pin head type and glazing 4mm thick with oil putty in squares with oil putty in squares n.exc 0.5 sqm in each pane.

S&F sheet glass ordinary quality 4 mm thick in squares n. exc. 0.50 sqm in each pane and glazing with oil putty after hacking out old broken glass panes.

S&F sheet glass ordinary quality 4mm thick with oil putty in squares with oil putty in squares n.exc 0.5 sqm in each pane.

S&F 9/10mm thick PVC ceiling/wall panels of interlocking types, width 250/255 mm with lamination design and exc 60% of PVC content including necessary H-joints, internal/external corner trim, coner cove,F/J edge trims where required fixedwith hidden screws to steel/wooden frame work complete all as specified and as directed.Make : Syntex/Rajshree plastiwood pvt ltd. Note : Rate inclusive of necessary frame work.

Taking down steel tubing and connections of 15 mm bore including cleaning for refixing or removal to store complete all as specified and as directed.

Taking down steel tubing and connections of 20 mm bore including cleaning for refixing or removal to store complete all as specified and as directed.

Taking down steel tubing and connections of 25 mm bore including cleaning for refixing or removal to store complete all as specified and as directed.

Cutting chases, pinning in, making good to facings where required & pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc; & cutting chases for concealed water tubing or concealed conduit wiring, etc.& making good, cutting not exc 10 cm grith in brick wall

S&F 15 mm bore Galvanised iron tubing, medium grade, with all fittings laid in trenches, floors or fixed to walls etc complete all as specified and as directed.Make : Jindal/Prakash/Tata

S&F 20 mm bore Galvanised iron tubing, medium grade, with all fittings laid in trenches, floors or fixed to walls etc complete all as specified and as directed.Make : Jindal/Prakash/Tata

S&F 25 mm bore Galvanised iron tubing, medium grade, with all fittings laid in trenches, floors or fixed to walls etc complete all as specified and as directed.Make : Jindal/Prakash/Tata

Refixing of old GI steel tubes and connections after cleaning of 15 mm bore in new or old position, any grade, to walls, ceiling, floors, etc complete all as specified and as directed.

Refixing of old GI steel tubes and connections after cleaning of 20 mm bore in new or old position, any grade, to walls, ceiling, floors, etc complete all as specified and as directed.

Refixing of old GI steel tubes and connections after cleaning of 25 mm bore in new or old position, any grade, to walls, ceiling, floors, etc complete all as specified and as directed.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately) capacity exc 500 not exc 1000 Ltr

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples including wooden beading s specified and as directed.

M & L for 2nd class hard wood Plain fillets.square,rectangular or triangular in section, clean sawn, secured with nails or brads sec area ecx 6 Sqcm but not exc 13 Sqcm complete

M&L for preparation of new or previously un treated wooden surfaces of any description, not otherwise described, width or girth not 10 cm width or girth and applying two coats paint over one coat of pink primer complete all as specified and as directed.

Supply and Fix, 1000 litres capacity triple layered Rotational Moulded Polyethylene (HDPE) FDA grade materials water storage tanks, (Cylindrical vertical with closed top) screwed lid type conforming to IS 12701-1996 with manhole lid and suitable locking arrangement including making holes for inlet, outlet, washout and over flow pipes, hoisted and fixed in position as specified in SSR Part -I (2009) complete all as specified and as directed. Make: Sintex/Polycon/Vectus

Demolition of old unserviceable RCC tank of any desccription or any capacity carefully incl removing all rubbish to out of Def land area and making good the old fixed portion of roof etc with plaster or cement concrete as reqd all as directed by the Engr In charge

S&F 25mm bore, Ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed,weight 455 gms complete as specified and as directed.

S&F in repair 25mm bore, Gun-metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete as specified and as directed.

S&F in repair 20mm bore, Gun-metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete as specified and as directed.

Supply and fix in repairs two way Bib cock 15 mm bore, cast copper alloy, chromium plated, fancy type with flange and crutch or butterfly handle conforming to IS as per Cat No.CON-041 KN of Jaquar or Cat No. F730054 of Hindware or T3534A1 of parryware or specified makes, screwed down high pressure with fly nuts, screwed for iron pipes or for brass ferrule etc., complete all as specified and as directed.

S&F in repair health faucet Make:Cat No. E8342A1of Parryware /F160108 of Hindware/ ALD-CHR 565 of Jaquar including 1.2m long flexible tube and wall hook complete all as specified and as directed.

Supply and fix in repairs corner glass shelf made out of glass with cp guard rail and wall fixing accessories of 300mm radius matt finished, chromium plated (MCH/Colour CP) with brass brackets as per Cat No.ACN-1173 of Jaquar or T6010A1 of Parryware or Prayag Cat No BEA-52 fixed on walls complete all as specified and as directed .

Supply and fix in repairs Angular stop cock 15mm bore, cast copper alloy, chromium plated, fancy type with long shank conforming to IS as per Jaquar Cat No CON-053KN or parryware Cat No T-9828A1 or Hindware Cat No F850030 screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union complete all as specified and as directed.

S&F in repair 75 mm dia PVC floor trap with cockroach trap and grating (double bowl type) with hole for waste pipe in grating including jointing to waste pipe complete all as specified and as directed.

S&F in repair 100mm dia PVC floor multi trap with and grating of size 100 x 100 mm complete all as specified and as directed.

Supply and fix in repairs vitreous china wash down water closet squatting pan, Orissa pattern of size 580x440mm with integral foot rest , colour white with and including P trap, lime concrete bedding and making necessary connection to soil pipes and flushing cistern etc.,complete all as specified and as directed. Make : Hindware/parryware /Jaquar.

Supply and fix in repairs PVC valve less, syphonic action type, low level flushing cistern, 10 litre capacity, white, with accessories like inlet, ball valve, float, handle, brackets, PVC flush pipe, over flow pipe etc., including taking down the exiting one complete all as specified and as directed.Make : Parryware/Cera/Neycer

Supply and fix Pillar tap 15 mm bore, cast copper alloy with capstan heads, chromium plated, fancy type, confirming to IS, screwed down high pressure with long screwed shanks and fly nuts, screwed for iron pipes, fixed in repairs complete all as specified and as directed. Make : Hindware/ parryware/ Jaquar

Supply and fix Bib tap 15 mm bore, cast copper alloy, chromium plated, fancy type, with crutch or butterfly handle confirming to IS screwed down, screwed for iron pipes or for brass ferrule, fixed in repairs all as specified and as directed. Make : Hindware/ parryware/Jaquar

S&F in repairs PVC connections 15mm size with brass nuts of length 600 mm each complete all as specified and as directed.

Taking down Cast iron / PVC pipe 75mm/ 110mm jointed in cement mortar taking out of wall. including all fittings, heads, sheos, bends, swan-necks, etccomplete all as specified and as directed.

S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/trenches complete all as specified and as directed.Make : Prince/Supreme/Finolex

S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.Make : Prince/Supreme/Finolex

S & F PVC (SWR) bends any radious 110 mm bore provided with acess door.Make : Prince/Supreme/Finolex

S & F PVC (SWR) bends any radious 75mm bore provided with acess door.Make : Prince/Supreme/Finolex

S & F PVC (SWR)110mm bore branch piece single(single Y) equal or Unequal .Make : Prince/Supreme/Finolex

S & F PVC (SWR)75 mm bore branch piece single(single Y) equal or Unequal .Make : Prince/Supreme/Finolex

S & F PVC (SWR)110mm bore branch piece single(single T) equal or Unequal .Make : Prince/Supreme/Finolex

S & F PVC (SWR)75 mm bore branch piece single(single T) equal or Unequal .Make : Prince/Supreme/Finolex

S & F PVC (SWR) vent cowl 110 mm bore.Make : Prince/Supreme/Finolex

S & F PVC (SWR) vent cowl 75 mm bore.Make : Prince/Supreme/Finolex

Excavating in trenches, n.exc 1.5m wide and n exc 1.5 in depth; for foundation getting out hard/dense soil.

Returning filling including spreading leveling watering and well ramming in layers not exc 25 cm hard and dense soil

Material and labour for providing plain cement concrete 1:3:6 type C2, using( 40mm graded stone aggregate )as in foundation filling all as specified and as directed.

M&L for Walling of random rubble,uncoursed, well bonded, bedded and solidly hearted, built in cement mortar in CM(1:4) as in retaining wall etc complete.

M & L for PCC (1:3:6) type C-1 (using 20 mm graded stone aggregate) as in padding, coping, bed plates, hold fast blocks, etc., including formwork, weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed.

Supply and fix in repairs 18mm thick High Density High Moisture Resistant (HDHMR) Board, both side laminated of approved colour as in shutters, back board, vertical support and horizontal shelves of kitchen/bedroom cupboards fixed with screw to timber framed work etc., including dismantling of existing any type of board and complete all as specified and as directed.Note: All exposed edges/surfaces to be finished with same laminated sheet to match with the other surfaces and nothing will be paid extra.

M&L for complete removal of existing treatment on surfaces of wall and applying with white putty of average thickness 3mm and making the surface to an even and smooth finish by rubbing with sand paper of different grade etc and applying two coats of Oil bound distermper over a coat of primer by approved applicator of the manufacturer of the paint and all as specified and as approved. Make : Asian/Berger/Nerolac

M&L for preparation of new surfaces of walls and applying with white putty of average thickness 3mm and making the surface to an even and smooth finish by rubbing with sand paper of different grade etc and applying two coats of Oil bound distermper over a coat of primer by approved applicator of the manufacturer of the paint and all as specified and as approved. Make : Asian/Berger/Nerolac

M&L for complete removal of existing treatment on surfaces of wall or ceiling and applying two coats of OBD over one coat of primer including 3mm thick wall putty complete all as specified and as directed.

Complete removal of existing treatment on external walls by wire brushing, crack filling and Bio-wash to fight microbial growth and applying one coat of exterior wall primer and two coats of Exterior Emulsion anti-algae weather proof paint for RR Masonry wall complete all as per manufacturer instruction as directed.Note: The painting work to be executed by authorised applicator of the manufacturer. Make : Apex Ultima of Asian Paints or weather coat Smooth of Berger or Nerolac Excel Top guard of Nerolac..

M&L for preparation of old or previously treated wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats paint over one coat of pink primer complete all as specified and as directed.

M&L Preparing newly plastered surfaces of external walls and applying exterior wall putty of 3mm thick for smoothness, one coat of exterior wall primer and two coats of Exterior Emulsion anti fungal weather proof paint APEX ULTIMA OF Asian Paint or WEATHER COAT SMOOTH of Berger complete all as per manufacturer instruction as directed.

Cleaning and polishing of old Terrazo/Mosaic /Kota stone flooring incuding fi8lling joints with white or coloured pigment all as spd and direted.

Taking down old, unsv aluminium/copper point wiring (light, fan, socket or power) complete, incl fixture & fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit & making good the disturbed surfaces of walls, floors, etc. complete all as specified and directed by Engr-in-Charge. Note:Old existing Surface Mounting down light/ Bulk Head light fittings of any type taken down/dismantled to be deposited to MES E/M Storeyard and cost of transportation of the same from site of work to MES E/M Storeyard is deemed to be included in the unit quoted rates.

Taking down old sub-main wiring incl fixture & fittings etc. removing materials to store for keeping in safe custody or for taking credit & making good the disturbed surfaces of walls, floors, etc. complete all as specified and directed by Engr-in-Charge.

Disconnecting/dismantling of old existing un serviceable DB's any type/way 240/415 Volts with their old/un serviceable burnt MCCB/MCB's etc. complete all as specified and directed by Engr-in-Charge. NOTE for Item Nos 95 to 97 : Cost of making good the disturbed surfaces is deemed to be included in the unit quote rates.

M & L for concealed point wiring with two single core 1.5 sqmm PVC insulated, unsheathed, FRLS cable, 1100 volts grade, ISI marked with multi stranded copper conductor drawn through and including non-metallic PVC rigid conduit (medium grade) with all fittings and accessories ISI marked incl provision of 1.5 sqmm PVC insulated, multistranded, unsheathed, copper conductor cable, FRLS, ISI marked as earth continuity conductor (green in colour) & incl fixing of modular metal flush boxes of appropriate size & thickness fixed flush to wall for mounting switch, sockets etc. with including cutting chases for conduits & sinkings for modular boxes & making good the disturbed surfaces, matching to the existing one etc. complete all as specified & as directed for One Light/fan/Call Bell etc. point controlled by one switch 5/6 Amps. Make of cable : Havells/Polycab/Finolex.Make of conduit-Precision/Bajaj plast/finolex

Description all as per Item No.98 above, but One switch socket outlet point 5/6 Amps on independent board.

Description all as per Item No.98, but with FRLS PVC insulated copper conductor cable of size 2.5 Sqmm and 2.5 Sqmm for earth continuity conductor green in colour for 16A switch socket complete. NOTE for Item Nos 98 & 100 : 1) Wiring Connection to be done in existing light point Switches,5Amp Switches Sockets, 15 Amp switche/Sockets, Metal Sockets Modular metal flush boxes shall be measured & paid separately. 2) Cutting chases & making good the disturbed surfaces is deemed to be included in the unit quoted rates. 3) Existing Switches and Sockets to be used. 4) If any Additional point wiring is to be done by contractor then metal box and cover plate to be measured and paid separately

M & L for concealed sub-main wiring alongwith earth wire of size (4x 6.00) sq. mm + (1 x 6.00) sq. mm earth wire, ISI marked, FRLS, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including non-metallic PVC conduit (medium grade) with all fittings and accessories ISI marked for conduits & sinkings for modular boxes & making good to walls, floors etc. complete all as specified & as directed. Make of cable : Havells/Polycab/Finolex, Make of conduit-Precision/Bajaj plast/finolex..

M & L for concealed sub-main wiring alongwith earth wire of size (2 x 4.00) sq. mm + (1 x 4.00) sq. mm earth wire, ISI marked, FRLS, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including non-metallic PVC conduit (medium grade) with all fittings and accessories ISI marked for conduits & sinkings for modular boxes & making good to walls, floors etc. complete all as specified & as directed. Make of cable : Havells/Polycab/Finolex, Make of conduit-Precision/Bajaj plast/finolex.NOTE for item No 101 and 102 : 1) Two runs of PVC wire, one run of earth wire & one run of PVC rigid conduit (medium grade) will be measured as one length. 2) Modular metal flush boxes (if req) shall be measured & paid separately.2) Cutting chases & making good, including necessary Putty work of the disturbed surfaces is deemed to be included in the unit quoted rates.

S & F Modular switch, one way, 6 Amp, 1 Module, 240 volt complete all as specified and as directed. Cat No : ACVSXXW061, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma

S & F Modular switch, one way, 16 Amp, 1 Module, 240 volt complete all as specified and as directed. Cat No : ACVSXXW161, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma

S & F Modular shuttered socket outlet 3 Pin, 6 Amp, 2 Module, 240 volts, ISI marked complete all as specified and as directed. Cat No : ACVKSWW063, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma

S & F Modular shuttered socket outlet 3 Pin, 6/16 Amp, 2 Module, 240 volts, ISI marked complete all as specified and as directed. Cat No : ACVKCWW163, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma

Supply & Fixing and concealing modular metal flush box suitable for fixing switches/sockets of 1/2 modules all as directed. Cat No : ACTXMIIX01/02, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma

Supply & Fixing and concealing modular metal flush box suitable for fixing switches/sockets of 3 modules all as directed. Cat No : ACTXMIIX03, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma

Supply & Fixing modular cover plate suitable for fixing switches/sockets of 1/2 modules all as directed. Cat No : ACVPPCWV01/02, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma

Supply & Fixing modular cover plate suitable for fixing switches/sockets of 3 modules all as directed. Cat No : ACVPPCWV03, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor NOTE for Item Nos 8 to 18 : The make/model of modular metal flush boxes & modular cover plates shall be same as that of modular switches & sockets.

S&F ceiling rose surface PVC/ Polycarbonate, Isolated body with face Bakelite three terminal complete all as specified and as directed. Make: Havells/CG/Anchor

Supply and fix energy saving high power LED building security light of 30W made up of pressure die cast aluminum housing with embedded PC cover having TOP Opening seperate driver compartment with IP66 protection including 40mm dia bracket bended into 120 degree angle and making connections in flexible conduit all as directed. Make: Cat no ENDURASUNDOWNSL30WLED757PASYBOPC Endura Sun Down of Havells or techno-commercially equiv In Jaguar/Philips

S & F ultra modern, Surface mounting, 40W, 6500K LED luminaire of size 2' x 2' suitable for ceiling complete with electronic driver & high brightness LED complete all as specified and as directed. Make: Luker, Cat No-LNPSRS40 or tech-commercial equivalent in Havells/cromption

Imp Note for Item Nos 103 to 113 : 1) Design/Drawing/Technical catalogue/ specifications along with comparative Rate Analysis to be submitted to the Engr-In-Charge/GE for Make/Sample approval of items whereever equivalency of Item(s) is concerned other than specified Make/Model/Cat/Part Ref concerned before placing order to the Manufacturer/Supplier. 2) Anything missed out in the technical specifications but technically required for efficient working is deemed to be included in the quoted rates.

S&F single pole and neutral enclosure with a two pin and earth plug and socket complete suitable for fixing one single pole MCB 20A C Series with Breaking capacity 10KA all as directed.Make: L&T, Cat No : DBMPS120SD or techno-commercially equiv in Legrand/ABB

Supply, Installing and Testing Vertical type Storage electric water heater (Geysers) of 25 Ltrs capacity, Tank made of ultra thick super cold rolled steel plates with high density PUF insulation,2 KW, 230 V, Single Phase, 50 Hz, AC, BEE 4 Star rated including multifuntion safety valve and 2 Nos anchor fasteners of size as per manufacturer instructions grouting and fixing and making good the disturbed surface complete and connecting electrical and water supply connection using steel braided hose 2 Nos complete all as specified and directed by the Engr-in-Charge. Make: Havells Model: Monza-DX,Cat No: GHWAMGSWH025 or tech-commercial equivalent in Racold/ Bajaj Note : (i) Installed Geyser's warrenty card duly signed by the user should be submitted to the Engr-in-Charge (ii) The cost of making good the disturbed surface & fixing arrangements required is deemed to be included in the quoted rate.(iii) Old unserviceable gyser to be submitted in MES Store yard (iv) The cost of transportation of old unsv geyser to MES storeyard is deemed to be included in unit quoted rates.

Supply, install, testing & commissioning of Exhaust fan, PVC body with connected accessories 250 mm sweep, single phase, 240 Volts, AC, 50 Hz,800RPM, Air delivery not less than 860 CMH, noise level less than 45 dB and connecting up complete including louvers and provision of cable 3/2 core of suitable size from ceiling rose to fan in flexible hose and making of suitable sized hole in the wall/existing window/ventillator etc. for fixing of the exhaust fan & making good the disturbed surfaces (if any) complete all as specified & as directed. Make : Havells, Cat No: Ventil Air DX or techno-commercially equivalent in Usha/Crompton. Note :- (i) The cost of making hole in walls/other surfaces & making good the disturbed surfaces incl any framework/cement work/wood work/welding work etc. required for proper fixing of the exhaust fan & matching to the existing surface is deemed to be included in the unit quoted rates

Supply, install, commissioning & testing of Exhaust fan, metal body with automatic back shutter louvers 300 mm sweep, 1400 RPM or more, Air Delivery not less than 1850 CMH, single phase, 240 Volts, AC, 50 Hz and connecting up complete including louvers and provision of cable 3/2 core of suitable size from ceiling rose to fan in flexible hose and making of suitable sized hole in the wall/existing window/ventillator/other surfaces etc. for fixing of the exhaust fan & making good the disturbed surfaces (if any) complete all as specified & as directed. Make : Havells, Cat No: Ventil Air - DB or techno-commercially equivalent in Usha/Crompton. Note :- (i) The cost of making hole in walls/other surfaces & making good the disturbed surfaces incl any framework/cement work/wood work/welding work etc. required for proper fixing of the exhaust fan & matching to the existing surface is deemed to be included in the unit quoted rates.(ii) The cost of transportation of old unsv Exfan to MES storeyard is deemed to be included in unit quoted rates.

S & F SPN DB, 12 Way, IP43, IK09, Metal double door type 240 volts fitted with busbar and blanking plates, neutral link and making good making good the disturbed surfaces with all other accessories including necessary connection all as specified and directed by Engr-in-Charge.Make: L&T, Cat No: DBSPN012DD or techno-commercially equiv in Legrand/Siemens

S & F SPN DB, 8 Way, IP43, IK09, Metal double door type 240 volts fitted with busbar and blanking plates, neutral link and making good making good the disturbed surfaces with all other accessories including necessary connection all as specified and directed by Engr-in-Charge.Make: L&T, Cat No: DBSPN008DD or techno-commercially equiv in Legrand/Siemens

S&F MCCB, 4 pole,63 A rating (Ics=100% of Icu),415Volts,36 KA Breaking capacity with adjustable overload & adjustable Short circuit setting complete all as specified & as directed by the Engr-in-Charge.Make: L&T, Cat No CM97919OOH2OG or techno-commercially equiv in Legrand/ABB/Siemens.

S&F 4 Way,IP43,IK-09 Metal Double Door,TP&N vertical DB fitted with Busbar and blanking plates, Neutral link with 4 pole MCCB as Incomer and SP/TP MCBs as outgoings,without MCCB, Concealing to wall and making good the disturbed surfaces with all other accessories including necessary connection complete all as specified and directed by Engr-in-Charge.Make: L&T, Cat No: DBVTL004DD or techno-commercially equiv in Legrand/ABB/Siemens. Note:- (i) The cost of making good the disturbed surfaces is deemed to be included in the unit quoted rates.

S&F MCB, SPN, C-Series 240 Volts of capacity 6-32 Amps with breaking capacity 10 KA all as specified and dircted by Engr-in-Charge. Make-L&T, Cat No-BB20320C or techno-commercially equivalent in LEGRAND/SIEMENS.

S&F MCB, SP, C-Series 240 Volts of capacity 40 Amps with breaking capacity 10 KA. Make-L&T, Cat No-BB10400C or techno-commercially equivalent in LEGRAND/SIEMENS.

S&F MCB, SP, C-Series 240 Volts of capacity 6-32 Amps with breaking capacity 10 KA. Make-L&T, Cat No-BB10320C or techno-commercially equivalent in LEGRAND/SIEMENS.

S & F MCB, DB, TPN, 04 ways, DOUBLE DOOR, IP-43, Ik-09 with metal door, rated bus bars, earth bar, neutral links complete including blanking plates as required and fixed flush to wall/other surface complete all as specified and as directed. Make : L & T, Cat No : DBTPN004DD or techno-commercially equivalent in Siemens/Legrand.

S & F MCB, TPN, 10KA, 415V, "C" curve, 63 A, ISI marked complete all as specified and as directed. Make : L & T, Cat No : BB40630C or techno-commercially equivalent in Siemens/Legrand.

S & F MCB, TP, 10KA, 415V, "C" curve, 63 A, ISI marked complete all as specified and as directed. Make : L & T, Cat No : BB30630C or techno-commercially equivalent in Siemens/Legrand.

M&L for earthing complete with galvanised steel earth plate electrode 600x600x6mm thick buried directly in ground (earth pit not less than 2.25mtrs deep below ground level) with top edge of plate not less than 1.5mtrs below normal ground level, connected to GI Wire of 4mm dia by means of bolts,nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 connected to earthing test point on completion with and including 20mm bore medium grade GI protection pipe (upto 7.5mtr long) for earth and 20mm GI medium grade for watering including PCC chamber pit & cover with suitable lifting hooks, with funnel, wire mesh, common salt, charcoal filling, necessary excavation and earth work in any type of soil complete all as specified including taking out the existing u/s earthing accessories. Note: On testing after completion, if the desired earth resistance is not obtained the earthing shall be redone at no extra cost till the entire satisfaction of Engr-in-Charge. . Make of GI Pipe : TATA/Jindal/Prakash

Supply and laying in trenches/through pipes or bare in road crossings/ paths /drains /ducts /floors /along poles/ walls/ ceilings etc. Cable Under ground, Armoured, XLPE insulated with stranded aluminium conductor, 1100 Volts grade of cross sectional area, 4 Core 35 Sqmm incl connecting with suitable glands, lugs etc all as specified and directed by the Engr-in-Charge. Make: Havells/Gloster/Polycab.Note: Removing of old Un-serviceable LT UG Cable is deemed to be included in the unit quoted rates.

Excavation in trenches not exc 1.5 m wide and not exc 1.5m depth for errecting of poles, Laying of cables and getting out in hard/dense soil complete all as specified.

Returning, filling in, including spreading levelling, watering and well ramming in layers not exc 25 cm in depth in hard/dense soil.

Removing excavated material to a distance not exc 50 m and depositing where directed at a level not exc 1.5m above the starting point all as directed.

Supply and laying sub class 'B' bricks of size 230 x 115 x 75 mm laid across the cable for cable protection, above sand complete all as specified and as directed.

Supply and laying light grade GI Pipe (ISI Marked) of 40mm dia for cable protection to be fixed on wall/in trenches with necessary clamps or in road crossing,complete all as directed(Rate qouted shall include MS clamps of required size wherever pipes are to be fixed on walls/other surfaces). Make:Tata/Jindal/Prakash

M & L for cutting the existing hard standing /PCC /WBM road at a depth not less than 45 cm and 25 cm in width for passing of cable through GI pipe, returning filling in, complete including finishing the surfaces by providing top not less than 25 cm thick cement concrete type C-1 (1:3:6) using 20 mm grade aggregate, bottom filled with excavated earth and finishing to a uniform smooth surface complete all as specified and as directed.

Supply, spreading and compacting of Riddled earth as approved by GE in trenches for cable cushion on both top and bottom of cable, including ramming complete all as specified and as directed by Engr-in Charge

Taking down and Refixing of serviceable 20/10 Watts LED Light fitting recd from site incl proper cleaning and making electrical connections complete all as specified and as directed by Engr-in-charge. NOTE: fitting removed from site to be used at site and remaining fitting to be Handed over to MES store yard ,Rate is deemed to be included in quoted rates

Taking down, concealing and re-fixing of existing TPN DB alongwith MCB including necessary internal electrical connection of wiring to DB complete all as specified and directed by Engr-In-Charge. Note : Making good the disturbed surfaces deemed to be included in unit quoted rate.

KGP BUILDERS

Sree Constructions