SPECIAL REPAIR TO BLDG NO P 07 TECHNICAL BUILDING AT 1 WEC UNDER GE CENTRAL DELHI CANTT 10

Amount

S & F 12mm thick toughned glass door in single/double leaf including stainless steel handles & stainless steel fixing arrangement fixed to ground/existing floor surface in cement concrete 1:2:4 B-1 type, incl floor machine and locking arrangement with 02 sets of duplicate keys incl all required accessories such as cleat, desiner knob & handle etc.including provision of tinted / frosted glass film with the logo of the unit complete all as specified and directed.

M & L for dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.

M&L for joint less Non Skid coloured ceramic tiles 7 to 8 mm thick (square/rect) area of each tiles exc .11 sqm but not exc 0.18 sqm in floor etc set and jointed in neat cement slurry and pointed in white or colour cement to match laid over and including provn of 15mm thick screed bed or bedding layer in CM 1:6 etc complete all as specified .

M&L for joint less Non Skid coloured ceramic tiles 7 to 8 mm thick (square/rect) area of each tiles exc .11 sqm but not exc 0.18 sqm as in skirting etc /wall or vertical surface etc set and jointed in neat cement slurry and pointed in white or colour cement to match laid over and including provn of 10mm thick rendering of backing coat in CM 1:4 etc complete all as specified .

M & L for Granite (of any type) tiles 20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement to match the shade of granite stone including grinding, nosing and polishing including 20 mm thick screed bed in CM 1:6 complete all as specified

M & L for taking down cement plaster in brick walls, including raking out joints, hacking for key, scrubbing down with water etc including scaffolding if required complete all as speci

M&L for rendering 12 mm thick in CM (1:6) on any faces of concrete or brick surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick in CM 1:4 on any faces of concrete or brick surfaces finished even and smooth without using extra cement complete all as specified.

M&L for rendering 5 mm thick in CM 1 : 3 on brick or concrete surfaces (in ceiling) etc finished even and smooth without using extra cement all as specified.

M & L for applying two coats of weather proofing exterior acrylic emulsion paint of DULUX weather shileld Max or APEX ULTIMA from Asian paint over one coat of primer on newly plastered surface complete all as specified and directed by Engineer-in-Charge.

M & L for two coat of distemper oil emulsion over a coat of primer and 2-3 mm thick JK Birla wall care putty including preparation of new plastered surface of wall complete all as specified and directed.

M & L for applying white wash three coats on newly plastered surfaces of ceiling including preparation of new surfaces for matching with repaired surfaces complete all as specified and directed.

Complete removal existing treatment from old surface of wall by scrubbing with hard brushing, brooming down or steel wire brushing scrapping down smook mould moss and efforescent salts and treating oil and greasy spots as applicable and washing with water & applying two coats of weather proofing exterior acrylic emulsion paint of DULUX weather shiled Max or APEX ULTIMA from Asian paint over one coat of primer complete all as specified and directed by Engineer-in-Charge.

M & L for preparation of old plastered surfaces and applying two coat of oil bound distemper including 2-3 mm thick JK Birla wall care putty on wall including removal of existing old surfaces complete all as specified and directed.

Cutting chases,of brick walls pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth complete all as specified and as directed.

Taking down chowkhat or frame with shutters (without taking off shutters from the frame exc 1.5 sqm but nexc 4 sqm each all as spd.

Taking down chowkhat or frame with shutters (without taking off shutters from the frame n exc 1.5 sqm each all as spd.

S& F steel window including pressed steel frame made of 1.25 mm thick MS sheet of size 125x60mm,double revated with side hung shutters both glazed and gauged incl box type hinges,steel handles and peg stay,tower bolts complete with glaze/gauge bars devotailed or welded incl one shop coat of red oxide primer (Wire gauge and glass panes shall be measured seperately) incl M & L for providing PCC type B-1 ,1:2:4(using 20mm graded stone aggregate) to fill the frame and making good complete all as specified and directed by Engr -in- Charge

S & F anodised aluminium window and ventilator shutters incl frame, fixed type without sash bar, aluminium section weighing 0.55kg/m including necessary jointing cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.50 sqm in each pane all as spd.

S & F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm all as spd.

S & F as pressed steel frames (125x60) mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., including one shop coat of primer complete, as specified, supplied and fixed complete all as specified and directed.

S&F 35 mm thick 2nd class hardwood glazed and skelton shutters open rebated and prepared to receive glass / gauze etc ( without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitered beads for securing glass etc size of members of shutters as specified in SSRpart-i section 8 clause 8.24(a) including one shop coat of pink primer complete all as specified and directed.

S and F 40 mm Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified

Supply and fix 300 mm long mild steel sliding door bolt, bolt type stove enameled black with bright bolt not less than 12 mm dia with an including a minimum of six bolts and nuts (four on bolt plate and two on staple plate) complete all as specified and directed.

S & F 150 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified.

S & F extruded aluminum alloy handles fabricated type and anodised of size 150mm, complete all as specified.

S & F butt hinges medium weight stainless steel 100mm size complete all as specified

S & F 140 mm floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F solid PVC door frame of size 50 x 47 mm made out of 5mm thick plain colour PVC sheet re-inforced with MS square tube, supplying and fixing in opening as per manufacturers instructions drawings and specifications complete all as specified and directed.

S&F factory made solid PVC moulded door shutter, 28 to 30 mm thick (Stiles), with 2,4 or 6 raised panel design with 2 mm thick 3D wood grain Moulded PVC sheet Polyurethane painted on the front face and 2 mm plain color PVC sheet on back face as per specification and drawing complete all as specified.

S & F 100 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified.

S & F 100 mm aluminium handles, cast type anodised complete all as specified.

M&L for two coats of synthetic enamel paint over a coat of pink primer on new wood or wood based surfaces not otherwise described over 10 cm width or girth incl preparation complete all as spd.

M&L for preparation of new steel surface and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.

S & F in repair rotational moulded polyethylene water storage tanks (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I, 1000 ltrs capacity.including float valve 20mm size including disconnecting of existing water tank complete all as specified.

Taking up or down 15 mm dia steel tubing and connection incl cleaning or removal to store all as specified

Taking up or down 20mm dia steel tubing and connection incl cleaning or removal to store all as specified

M & L for 15mm bore galvanised steel water tubing medium grade with all fittings (ISI Marked) and fixed complete to walls and or laid under floors etc complete all as specified .

M & L for 20mm bore galvanised steel water tubing medium grade with all fittings (ISI Marked) and fixed complete to walls and or laid under floors etc complete all as specified.

Demolition of Cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for, complete all as specified and directed.

Material and labour for cement concrete 1:3:6 type C2 (using 40 mm graded stone aggregate) as in plinth protection 75 mm thick laid in bays and surfaces finished even and smooth without using extra cement complete all as specified and directed.

M & L in repairs PVC connection 15mm dia of standard pattern 450mm long, with two Nos brass check nuts (adopts) and washers etc complete all as specified.

M&L 2mm thick PVC fibre mirror cabinet of size (450x325x120mm ) and firxed to wall after taking down old mirror all as specified and directed.

S&F in repairs PVC waste pipe of standard pattern, 32mm bore socketed end 600mm long for wash basin complete all as specified.

S & F towel rail 600mm long brass chromium plated of 20mm dia (external) and 1mm thickness with gutties embeded in cement mortar 1:3 with MS screws etc complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed.

M & L for framed work as in doors, sun shade or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe-410W-Gde-250 quality A complete all as specified and directed.

S&F decorative type wooden finish drapery rod,25 mm dia incl side caps and wooden brackets,wooden rings @12 cm distance centre to centre complete all as specified. Vista FE-22 series or equivalent as per approved make list

S&F in repairs fancy type CP brass shower rose with flat panel 125 mm size suitable for 15mm bore pipe complete all as specified and directed .

S & F in repair fancy type brass CP angle valve 15 mm dia complete all as specified

S & F in repair fancy type concealed brass chromium plated stop valve fancy type suitable for 15mm bore of pipe with long shank and cup complete all as specified and directed .

S&F in repair fancy type brass chromium plated bib tap for iron pipe of 15mm bore fancy type with flynut capstan head, screwed down high pressure complete all as specified.

M & L for cement concrete 1:2:4 type B0 using 12.5 mm graded stone aggregates as in roof kerbs, or mud stops, rounded or chamfered on edges, coping complete all as specified

M&L for cutting holes in brick wall built in cement mortar exc half brick but not exc full brick wall and making good in cement concrete 1:2:4 type B-1 complete all as specified.

M & L for 25 mm sand filling under floors or in foundation including watering and consolidation

Material and labour for machine pressed precast PU coated concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and no pigment (Note : - Sand cushion will be measured and paid separately).

M & L for hardcore of gauge n exc.63 mm(using broken stone or boulders) deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface all as specified

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles

M & L for brickwork with subclass- ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6

M&L for 18/19mm thick prelaminated particle board, exterior grade, prelaminated both side with decorative choice lamination fixed with screws to timber frame work as in cup board shutter, loft shutters incl 6 mm thick teak wood lipping and necessary rebating for shutters wherever required including polishing to lipping/rebating complete all as specified.

S&F continuous (Piano) hinges, mild steel, bright finish or electrogalvanised, width of flaps (when open) 40 mm, complete all as specified.

Supply and fix MS 40mm dia, cup board knobs, glossy finish, fixed with nuts, screw and washer complete all as specified and as directed.

Supply and fix door magnet suitable for cupboard shutters complete all as specified and as directed.

S & F 100mm size hasp and staple, safety type, aluminium anodised with mild steel hinges pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

S & F ball catches with 8mm dia steel ball and brass body and striking plate including rating in repair complete all as specified and as directed.

Dismantling loose concrete cover of RCC columns,beams,slabs chajjas and the like as directed, roughening and cleaning concrete surfaces with steel wire brushes, washed with water and allowed to dry including derusting of steel reinforcement to providing fabric mild steel wire mesh 75X75X3 mm dia as reinforcement to concrete surfaces, applying adhesive admixture over steel mesh and providing minimium 40 mm thick (average thickness) guiniting mix using 1 part of ordinary portland cement 53 grade and 2 part of ghaggar sand mixed with the pressure of 2 to 2.5 kg per sqm by guinting machine including necessary plaster in CM 1:4, 10mm thick to match existing surface and surfaces finised even and fair.all as specificed

S&F 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed complete all as specified and as directed.

M & L for aluminium alloy powder coated door including aluminium powder coated rectangular frame of sections 101.6 x 44.45 x 2.10 mm weight not less than 2.54kg/RM and shutter (Top rail 47.62 mm x 44.45 mm x 2.10 mm thick shutter bottom 114.3mm x 44.45mm x 2.10 mm shutter vertical 85mm x 44.45 mm x 2.10 mm thick shutter middle 83.50 mm x 44.45 mm x 2.10 mm thick glazing clip weighting not less than 0.097 kg / metre ) including alluminium alloy powder coated snap type beads ,handles, tower bolts,rubber gaskets,100 mm brass vertical mortice lock etc including provision of 5.50mm thick tinted glass / 12 mm thick both side prelaminated particle board as required and with provision of tinted / frosted glass as approved by GE as required by user complete all as specified and directed.

M & L aluminium alloy powder coated windows 1.8mm thick including aluminum powder coated frames sliding track, bottom weighing not less than 1.015 kg/RM, sides and top not less than 0.826 kg/RM double revated and 0.55 kg for window shutter with one fixed glazed shutter and two nos glazed/gauged shutter sliding type with aluminium sections as per series - B (18mm) 3 track 1.5mm thick of Jindal section numbers for sliding windwos with framed shutter including aluminium allow powder coated snap type beads handles with locking arrangement spring action and glazing clip joint cleats rubber gaskets etc including provision of 4.0 mm thick tinted glass/frosted glass of superior quality and stainless steel jali including all standard fittings complete all as specified & directed.

S & F for Aluminium powder coated ornamented grills (Pattern Approved by GE) complete all as specified.

S and F repair automatic fancy type wash down single seat vitreous china EWC(Model no-hindware elba Catalouge No-92037 or equivalent in other approved makes) with in built flushing cistern including spray jet ,health faucet ,seat cover ,2 in 1 angle /stop valve both for EWC and heath faucet with provision of cement concrete bedding fixed with P and S trap copmlete all as specified .

Material and labour for complete removal of existing treatment old decorated surface of walls and applying cement based wall care putty (Birla care/JK wall putty) thin layer (average) and applying two coats of plastic emulsion (any colour) paint to achieve uniform and smooth surface by roller brush over a coat of primer of same manufacturer complete all as per manufactures instruction and directed.

M&L for Dark Shade / Double charged/ ultracharged Virified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including provn of 15mm thick screed bed or bedding layer in CM 1:6 etc complete all as specified .

M&L for Dark Shade / Double charged/ ultracharged Virified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, on vertical surfaces as in skirting, dado & steps etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including provn of 15mm thick rendering as in backing coat in CM 1:4 etc complete all as specified .

Dismantling of FRP/ asbestos sheet (corrugated or semi corrugated) fixed in roof including ridges all as specified

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM (1:4)

S&F 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors

S&F 110mm dia PVC (SWR) bends any radius

M&L for Chajjas,fibreglass Reinforced Plastic (F. R. P.)chajja 4mm thick of required colour ,size and design made by Resin Transfer Moulding (RTM)machine Technology, Resulting in Void free compact laminate in single piece ,having smooth gradual slope curvature for easy drainage of water and duly reinforced by 2Nos vertical and 1No horizontally 50x2 mm thick MS flat with 12mm in built hole for grouting on the existing wall along with the 50mm flanges duly inserted and sealed in the wall complet in one single piece casted monolithically, including all necessary fitting . The FRP chajja should manufacture using unsaturated polyester resin as per IS: 6746 , duly reinforced with fibreglass chopped strand mat (CSM)as per IS:11551 complete with protective Gel coat U/V coating on Top for complete resistance from the extrem of tempreture ,weather & sunlight. Make Duratuff/Lexan/VMT Plasete Ltd/Coxwell Domes Engr (P) Ltd.

M and L Providing & Fixing False ceiling with semi perforated 12mm thcik micro tegular edged at all heights with GRG (Glass Fibre reinforced Gypsum) false ceiling tiles of size 595x595mm of approved texture, design and pattern having moisture content less than 2%,humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 475 (part-4)-1970 and light Code Description unit rate No 429 SUB HEAD :26.0 NEW TECHNOLOGIES AND MATERIAL reflectance of 85% minimum to be laid in true horizoatal level suspended on interlocking metel T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanised @ 120 grams oer sqm including both sides) comprising of main-T runners of size 15x32mm of length 3000mm, vross-T of size 15x32nn of lenght 1200mm amd secondry itermediate cross-T of size 15x32 of lenght 600mm to form grid module of size 600x600mm, suspended from ceiling using galvanised mild steel items (galvanising @ 80 grams per sqm) ie.50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L-shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x24x0.40mm of length 3000mm to be fixed on perimeter wall/partition with the help of plastic rawl pluhs at 450mm center to center and 40mm long dry wall screws. The work shall be carried out as per specification, drawing and as per direction of the Engineer-incharge

S and F in repairs vitreous chinaware wash counter wash hand basin size 600x400x185 mm complete including ,CP waste coupling ,waste pipe ,complete fixing arrangement and cutting for and pinning in wall and making good complete all as specified and directed by Engg.in.charge . Make -jaquar cat no-SLS-WST-6601 or equivalent as per approved make list.

S and F in repairs Health faucet ,CP brass with 1.50 m long flexible pipe of specified and as directed.

S and F in repairs Glass shelf assembly 450 mm long 150 mm wide with cp railing complete all as specified and directed .

S and F venetian blinds of superior quality fabric (as approved by AGE ) horizontal vertical type ,with 100 mm wide louvers ,including supplying and fixing of all arrangement required for proper functioning of blinds such as aluminium top and bottom guide rails ,rollers ,chain ,etc.of make(Vista /levalor) or equivalent as per approved make list,complete all as specified and as directed by the Engg.in.Charge

M&L for roof treatment as per the description below :- a) preparation of horizontal/vertical surfaces of brick/concrete /existing roof treatment roof surfaces also removing the , cleaning and washing down and make the surfaces free from dust and other conteminate Supply and fix APP polymeric water proofing membrane minimum 3mm thick and weighing not less that 3.5 kg per sqm of make ‘Superthemolay’ by STP Ltd or Hyper Plas Polyester manufactured by M/s IWL or Bengal supermat manufactured by M/s Bengal bitumen or SBS water proofing menbrane manufactured by M/s Modern bitumen Pvt Ltd or Torch tar Brand APP membrane of torchtar membranes & Bitumen products pvt Ltd over compatible bitumen primer @ 0.4 kg/sqm by torching application with a propane or butane gas torch with an overlap of 100mm at the sides and 150mm at the ends all as per manufactures instruction incl preparation of surface and applying a consistent coat of bituminous aluminum paint over APP surface complete all as specified and directed including taking down existing water proofing treatment and disconnecting water storage tank including connections for carrying water proofing treatment & placing the water tanks & making connections after carrying out water proofing treatment complete all specified and directed by Engineer-in-Charge Note : (The water proofing treatment shall be got carried out by manufacturer or their authorized applicators only) Note: 1. Contractor shall have to be render a guarantee for 10 year the effectiveness of treatments & a FDR @ 10% of respective item shall be rendered for 10 year.

S & F collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runneers, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete

Excavation in trenches (soft/loose soil) n exc. 1.5m wide and n exc 1.5 m in depth for foundation etc. and getting out all as specified.

M&L for providing plain cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation and mass concrete complete all as specified.

M&L for Cement Concrete Type B1 1:2:4 (20mm graded aggregate) as in copings, kneelers, apex stones, bed plates, including weathering, slightly rounded for chamfered angles and throating, as directing

M&L for cement concrete 1 : 4 : 8 type D2 using 40mm graded stone aggregates incl packing under and haunching against the sides for 150mm internal dia DWCPE pipes after they are laid and tested complete all as specified (thickness of concrete bed 100mm).

Supply and laying, jointing 150mm internal dia of DWCPE pipe in lieu of SGSW incl testing and laid in trenches to a level on concrete bed complete all as specified.

M&L for mild steel TMT bars 10mm dia and over as in stirrups and spacers, binders, cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9mm dia or securing with clips All as specified

M&L for providing pre cast RCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in cover slab and man hole covers of size (1m x .50m x .05m) etc complete all as required.

M&L for cement concrete 1:2:4 type B-2 using 40mm graded stone aggregate as in surface channels all as specified

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, mounds, mitred/stopped end etc.

Returning, filling in, including spreading, levelling, watering and well ramming in l;ayers not exc 25 cm in soft and loose soil all as specified.

M & L for removing excavated material exc. 250m but not exceeding 500m and depositing where directed all as specified.

Taking down carefully copper/aluminium point wiring from wooden battan or conduits (light, fan, socket or power) complete including (fittings such as switches, ceiling roses, pendants, regulator, sockets,all light fitting etc. for credit and making good the distributed surfaces of wall, floor etc complete all as specified and directed.

Taking down old MCCB , TPN DBs , SPN DBs, & main switch/ enclosure box of any make and type from the site and making good surface complete all as specified and directed.

Taking down old carefully unserviceable recess mounted 2"x2" (4x14 watt) light fitting of any make and type from the pop hard pop false ceiling without damaging the existing false ceiling structure and making good the disturbed surfaces around the light fitting with POP and matching with the existing colour.

Taking down old submain wiring of any size and make from the site and making good surface complete all as specified and directed.

M & L for Point wiring complete with 1.5 sqmm single core PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor drawn through and including non-metalic rigid new PVC conduit medium grade ISI Marked not less than 20 mm dia and all conduit accessories concealed in wall on surface in ceiling/fixed to roof/truss/columns etc and including provision of 1.5 sqmm PVC insulated copper cable FRLS as earth continuty, fabricated modular metal flush box, concealed in walls with suitable modular inner and outer plate for housing switches , socket out let and fan regulators etc, complete all as specified.

(a) One light /Ceiling fan/exhaust fan point controlled by one switch.

(b) One 3 pin 5 Amps socket outlet point controlled by one No one way switch on same board

(c) One 3 pin 5 Amps socket outlet point controlled by one No one way switch on independent board.

M&L point wiring with PVC unsheathed multi stranded copper conductor cable 2.5 sqmm FRLS 1100 Volts in New PVC concealed conduit medium grade ISI Marked not less than 20 mm dia in new M S steel terminal boxes modular including one run of using 1.5 sqmm FRLS 1100 Volts copper conductor cable as earth continuity connected to common earth for one 15 A switch socket power point, all as specified

M&L switch Modular type 6 Amps one way ISI marked 230V AC complete all as specified.

M&L Modular socket outlet 5 pin 6 Amp socket 2 module ISI marked complete all as specified.

M&L switch Modular type 16 Amps one way ISI marked 230V AC complete all as specified.

M&L Modular socket outlet 5 pin 6/16 Amp universal socket 2 module complete all as specified.

Supply & Fix Modular five stepped type electronic fan regulator 2 module ISI marked 230V AC complete all as specified.

M&L ceiling rose 3 phase PVC polycorbonate,isolated body.

M&L for submain wiring with two single core PVC insulated FRLS 1100 Volts unseathed stranded copper conductor cable 4 Sqmm in and including new PVC conduit medium grade not less than 20 mm dia, for submain wiring and connection complete FRLS 1100 volts unsheathed stranded copper conuctor cable of 2.5 Sqmm size stranded conductor as earthwire.

M&L for submain wiring with two single core PVC insulated FRLS 1100 Volts unseathed stranded copper conductor cable 6 Sqmm in and including new PVC conduit medium grade not less than 20 mm dia, for submain wiring and connection complete FRLS 1100 volts unsheathed stranded copper conuctor cable of 4 Sqmm size stranded conductor as earthwire.

M&L for submain wiring with two single core PVC insulated FRLS 1100 Volts unseathed stranded copper conductor cable 10 Sqmm in and including new PVC conduit medium grade not less than 20 mm dia, for submain wiring and connection complete FRLS 1100 volts unsheathed stranded copper conuctor cable of 10 Sqmm size stranded conductor as earthwire.

M & L for earthing complete with galvanized steel earth plate 600x600x6mm thick buried vertically in ground to depth not less than 2.25 mtr below ground level, with top edge of the plate not less than 1.50 mtr below normal ground level, connected to earth lead GI 4mm dia by means of bolts, nuts, check nuts and washers of galvanized iron and connection to main switch board of panel, including watering pipe GI 20 mm bore light grade 15mm bore for earthing lead, wire mess, funnel, salt, charcoal dust, excavation and refilling pit with PCC 1:2:4 type B1(using 20mm dia stone aggregate) reinforced with 6mm dia round bar @ 75mm cement concrete both always with MS handle 12mm dai and frame all as shown in electric plate No 3 in page 497 of SSR Part I (2009) including testing ion completion all as directed

M&L for earth continuity conductor or main earthing lead fixed to wall on batten or recessed or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc 4 mm dia galvanised or steel wire complete all as specified.

S&F MCB DB SPN 12 way Horizontal, IP - 43 Protection double door 240 V AC 50Hz with for MCB SPN as incomer and SP MCBs as out going with tinned copper bus bar ,neutral link earth link complete.

Supply and fix MCB DB SPN 8 way Horizontal, IP - 43 Protection double door 240 V AC 50Hz with for MCB SPN as incomer and SP MCBs as out going with tinned copper bus bar ,neutral link earth link complete.

S&F MCB SPN 63 Amps 240 volts 10 KA 50 HZ 'C' curve complete.

M&L MCB SPN 32 Amp "C " curve

M&L MCB SP 6 to 32 Amp "C" curve.

Supply and fix LED batten luminaire surface mounted, 4 feet system wattage of 22 Watts with lifetime of 50000 burning hours with 70% of its initial lumen maintained. CRI>80, Power Factor > 0.95, THD< 10%, colour temperature - 6500K, surge protection 2.5KV in CM, IP-20 protected, meets LED IS specifications, Class - 1, Short circuit and over circuit protection, voltage range - 150 to 270 Volts AC, temperature range 0 to 50 DegreeC, system efficacy at luminarie level > 100 Lumens/watt and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed complete.

Supply and fix LED batten luminaire surface mounted 2 feet system wattage of 10 watts and not less than 900 lm system lumen output with life time of 50000 burning hours with 70% of its initial lumen maintained. CRI > 80, power factor > 0.95, THD < 10%, color temperature > 6500 K , surge protection 2.5 KV in CM IP- 20 protected meets LED IS specifications, short circuit and over circuit protection, voltage range - 150 to 270 volts AC, temperature range 0 to 50 Degree C, and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire fixed complete.

Supply and fix 10 watts bulkhead fitting with powder coated die cast aluminium housing with glass/ non yellowing polycarbonate cover, IP65 Protection, System level efficacy of the Luminary is > 90 lm/W with a life class of 50,000 burning hours at L70 criteria, Power Factor >0.95, driver with Voltage range 150-270V, Temperature range 0 to 50 Deg, Driver efficiency >85%, THD<10%, CRI>80, Color Temperature-6500K, Surge protection of 4.0 KV, including connecting up with necessary PVC sheathed 3 core 1.5Sqmm copper conductor flexible wire fixed complete.

supply and fix recessed mounting LED FLAT panel 2"x2" made of crca sheet steel duly power coated with high efficient LED and glaire free full opal diffuser , IP 20 Suitable for 36 watt,230 volts ,50 Hz AC Supply, Neutral White,with electronic driver and incluiding all fixing accessories complete.

Supply & fix factory made epoxy powder coated Distribution Board TPN-4 ways with metal double door (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amp copper bus bar, neutral bar, standard DIN rail, Earth bar and cable ties for cable management, top and bottom removeable gland plates with knockouts and suitable for one TPN- MCCB 125/160 Amp as incomer and 40 to 63 Amp SP MCBs outgoing complete all as specified and conforming to IS : 8623.

M&L MCCB 125 Amps, 16 KA , 4P, 415 V complete.

Supply and fix 45 W High efficient LED Street light fitting with pressure die cast LM6 Aluminum housing and has lenses specially designed for Street Lighting with polycarbonate cover. System level efficacy of the Luminarie is 100lm/W with a life class of 50,000 burning hours at L70. The color temperature is around 6500 K with a color rendering index of 70. The luminaire is IP:66 protected with IK05 impact resistance. It has an electronic driver complaint to IEC safety standards with a power factor>.0.9, voltage variation range 120-270V, THD<20%, High and low protection along with a surge protection of 4 KV including provision of 40mm dia GI light grade pipe1.5 meter length bend to shape and necessary clamps etc for fixing the light fittings on pole fixed complete

Taking down carefully the existing ceiling fan of 1200mm from its position after disconnecting electric connection and deposits in MES Store all as specified and directed.

Supply and fixing ceiling fans Robust and reliable inverter motor (brush less DC Motor) powered by ECM technology, BEE 5 star rating for energy saving, AC single phase 230/240 V of size 1200 mm sweep including making connection with three core flexible, copper cable pvc insulated of suitable length, complete all as directed .

S&f fresh air fan PVC body AC single phase 230/240 V of size 250 mm sweep with louvre fixed complete with suitable size ply by cutting into suitable size as required complete.

S&F sheet metal enclosure single pole and Neutral with a two pin earth plug and socket complete with a MCB SP 20 Amp 230 volts, 50 Hz, 10KA breaking capacity complete.

S&f exhaust fans AC single phase 230/240 V of size 300 mm sweep, metal body with louvre for fixing of exhaust fan complete.

Provn of telephone Point wiring complete with single pin 0.5mm dia copper conductor cable telephone pain taped and rip conforming to ITD specification D-3003 and ITI-113C/114C cable PVC insulated drawn though PVC concealed conduit not less than 20 mm dia for one 2 pin telephone socket out let on independent modular type board.

Provn of RJ-11 Telephone socket with transparent shutter 1 module on phenolic laminated sheet etc as required.

Provn of RJ-45 Telephone socket with transparent shutter 1 module on phenolic laminated sheet etc as required.

Taking down carefully the existing Exhaust fan of 300mm rom its position after disconnecting electric connection and deposits in MES Store all as specified and directed.

Provn of Wall mounted fans AC single phase 230/240 V, of size 400 mm sweep, speed RPM 1400,Sturdy and shock proof body for fixing of wall fan complete.

Provn of load change over switch with sheet metal enclosures 415 Volts, 250 Amps, 3 Phase with neutral link complete with lugs, thimble, cement works etc

M&L for breaking the old existing wall and making provn of a round hole for fixing of 300 mm sweep exhaust fan including making good to the disturbed wall/ portion and matching with existing colour.all as specified and directed.

M/S Rohit Enterprises

The new hut furnitures

LAMBA ENTERPRISES

tarun construction co

M/s SAAR ENGINEERS

imran construction company