REPAIR REPLACEMENT OF JOINERY FLOORING WALL AND

Amount

Demolition of cement concrete (un-reinforced) in ground floors and paving n.exc. 15cm thickness (below or above ground level) including removing the rubbish off the premises complete all as specified .

M & L for providing 75 mm thick cement concrete type E-2 ,1:5:10 ,using 40 mm graded crushed stone aggregate (Nominal Mix ) as in sub base, complete all as specified .

M&L 75 mm thick PCC 1:3:6 type C2 ( using 40 mmgraded crushed stone aggregate) finished even & smooth without using extra cement as in plinth protection/path complete all as specified .

M&L 25mm thick cement concrete type B-1, 1:2:4 (20mm graded crushed stone aggregate) as in sub base of floor complete all as specified .

M&L for fine sand cushion under interlocking paver & joint filled with fine sand complete all as specified . (compacted thickness shall be measured and paid)

S&F machine pressed precast , prelaminated coloured concrete interlocking paver block (VIBROCOMPRESSED ) any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 , with grey cement and no pigment complete all as specified .

M&L cement concrete coloured chequred tiles 300mm x 300mm x 20-25 mm thick , rubber moulded set and jointed in neat cement slurry in floors with mixture of grey cement and pigments over and including 15 mm thick screed bed CM (1:6) and making good on edges with cement concrete (1:2:4) Type B-1, complete all as specified .

Dismantling floor , hearth or wall tiling including cement mortar bedding ( but not backing ) removing serviceable tiles to store and rubbish off the premises complete all as specified .

M & L for machine cut kota stone slab flooring 18 to 20 mm thick laid and jointed with grey cement slurry and pointed with grey cement mixed with colour pigment to match the shade of the slab including cutting, rubbing and granite polishing over and including 20 mm thick screed bed in CM 1:6, complete all as specified. ( Size of the slab shall not be less than 2'x2')

M & L for machine cut kota stone slab 18 to 20 mm thick in riser or steps skirting , dado and pillar laid over and including 10 mm thick rendering in CM 1:4 complete all as specified and directed.

M&L for 6 to 8 mm thick (square/ rectangular) non skid colour ceramic floor tiles (joint free) area of each tile exceeding 0.18 sqm but not exceeding 0.38 Sqm (of size not less than 600 mm x 600 mm), in floor set and jointed in neat cement slurry and pointed with colour cement mixed with pigment to match the colour of tiles over and including 15 mm thick screed bed bedding layer in CM 1:6 ,complete all as specified .

M&L for 6 to 8 mm thick (square/ rectangular) non skid joint free colour ceramic floor tiles, area of each tile exceeding 0.11 sqm but not exceeding 0.18 Sqm (size not less than 400 mm x 400 mm) in floor set and jointed in neat cement slurry and pointed with colour cement with pigment to match the colour of tiles over and including 15 mm thick screed bed bedding layer in CM 1:6, complete all as specified .

M&L for 6 to 8 mm thick (square/ rectangular) non skid joint free colour ceramic floor tiles, area of each tile exceeding 0.06 sqm but not exceeding 0.11 Sqm in floor set and jointed in neat cement slurry and pointed with colour cement with pigment to match the colour of tiles over and including 15 mm thick screed bed bedding layer in CM 1:6 complete all as specified and directed by Engr-in-charge.

M&L for 9 to 10mm thick (square) non skid colour heavy duty tiles of size 300mmX300mm, in floor over and including 15mm thick screed bedding layer in CM 1:6 for laying floor finishes complete all as specified .

M&L for 7 mm thick glazed ceramic tiles, coloured, of size 200 X 300 mm in vertical surfaces such as dado, skirtings, set and jointed in neat cement slurry and pointed with white cement with pigment to match the colour of tiles, over and including 10 mm thick rendering layer in CM 1:4 complete all as specified and directed by Engr-in-charge.

M & L for granite stone slab 20 mm thick machine cut bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and over and including 20 mm thick screed bed 1:6 CM complete all as specified.(Size of granite slab shall not be less than 2'x2')

M&L 20mm thick Granite tiles machine cut, in skirting/ dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone complete over and including 10 mm thick rendering layer in CM 1:4 complete all as specified.

M&L Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations complete all as specified .

S&F in repair 19/20 mm drapery curtain rod stainless steel tubing with PVC layer and two nos brass finish (Latto) with two nos bracket complete fixing arrangement complete all as specified .

S & F in repair Mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples in steel / wooden / Z section window, ventilator & doors with necessary wooden beading / pin / nut bolt including necessary flat etc. complete all as specified .

Supply only mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staples in steel / wooden windoow, ventilator & doors with necessary wooden beading or complete all as specified and directed by Engr-in-charge.

Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins/ spring clips and S&F 3.0 mm thick clear transparent cast acrylic sheet fiixing with silicon glass glue and oil putty /adhesive/wooden beads including glazing clips in square n exc .5 sqm each pane complete all as specified .

Supply only 3.0 mm thick sheet glass ordinary quality and glazing with oil putty /wooden beads including glazing clips in square n exc 0.50 sqm each pane complete all as specified .

S&F 5.5 mm thick sheet glass ordinary quality, exc. 0.50 Sqm in each pan, complete all as specified .

S&F in repair cast iron soil waste and vent pipes and also as in spout in any length with or without ears with lead joints fixed in wall or in floors using sand cast CI pipes 100 mm bore pipes etc complete all as specified.

S&F in repair cast iron soil waste and vent pipes and also as in spout in any length with or without ears with lead joints fixed in wall or in floors using sand cast CI pipes 75 m bore pipes etc complete all as specified .

M&L for cast iron floor trap including jointing to waste pipes in cement concrete (1:2:4) type B-1 using 20 mm graded crushed stone aggregate, 75mm bore outlet fixed in repair complete all as specified .

S & F in repair CI Bend of size 75 mm bore complete all as specified .

S & F in repair CI Bend of size 100 mm bore complete all as specified .

Taking down and then refixing of CI pipes of size 75 mm bore after cleaning/ removing blockage complete all as specified .

Taking down and then refixing of CI pipes of size 100 mm bore after cleaning/ removing blockage complete all as specified

S&F in repair PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints fixed to wall or laid in floors with necessary clamps, complete all as specified .

S&F in repair PVC (SWR) pipes 110 mm bore single socketed in any length with rubber ring joints fixed to wall or laid in floors with necessary clamps, complete all as specified .

S&F in repair PVC (SWR) bends 110 mm bore rubber ring joints fixed to wall , complete all as specified .

S&F in repair PVC (SWR) single T single or unequal 110 mm bore rubber ring joints fixed to wall complete all as specified .

Dismantling of brick work /stone work like items built in cement mortar including all quoins, arches pillars etc but excluding ashlar facings etc. complete all as specified including removing rubbish off the premises.

M & L for Brickwork with sub class ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified .

All as per item no. 37 but except bricks including removing mortar from bricks and cleaning bricks, stacking for measurement including extra handling and removal and disposing off rubbish off the premises complete all specified.

M&L for 15 mm thick rendering on fair faces of brick work or concrete surface finished even & smooth in CM 1:6, complete all as specified .

M&L PCC (1:2:4) type B-1 using 20 mm graded crushed stone aggregate as in hauching and benching, coping and drains finish even and smooth using extra cement , complete all as specified .

M&L for preparation of newly plastered surfaces of wall and applying three coats of white wash,complete all as specified .

M&L for preparation of newly plastered surfaces of walls and applying two coats with distemper oil emulsion (exterior grade) after providing chalk whitening and a layer of wall care putty (preparatory to distempering ) , complete all as specified .

Taking down cement plaster including hacking out joints, hacking for key scrubbing down with water, including M&L for 10 mm thick ceiling plaster including dubbing out average 10 mm thick in CM 1:4 and applying three coats white wash including preparation of new surface complete all as specified.

M&L repairs to broken edges of roof projection ,chajja facia and simillars works girth n.exc. 30 cm with 15 mm thick plaster including dubbing coat in CM 1:3 and making sharp and straight edges of repaired work and applying two coats of cement base paint complete all as specified .

M&L repairs to broken chajja and its edges ,facia and simillars works with 15 mm thick plaster including dubbing coat in CM 1:3 ,necessary concrete and form work, PCC benching over junction and wall and applying two coats of cement base paint of size upto 1.0 sqm complete all as specified .

M&L preperation for old surface of wall after complete removal of existing treatment of wall and applying coat of wall putty Birla/ JK white (to achieve smooth surface) after primer and applying two coat of oil bound distemper (exterior grade) complete all as specified .

M&L for preparation of old decorated plastered or unplastered surfaces of wall and applying one coat of colour/white wash complete all as specified .

M&L for preparation of old decorated plastered or unplastered surfaces of wall and applying one coat of cement base paint complete all as specified .

M&Lfor preparation of old plastered surface of walls and applying one coat of oil bound distemper complete (exterior grade) all as specified .

S&F MS cover 0.50 mm sheet cover over PVC tank circular top cover for 300/500/1000 litr capacity and clip type bolt for locking arrangement for side opening and suitable on over 50mm long nail with snap edge on top cover and spikes for protection from monkey complete all as specified including painting with two coats of synthetic enamel paints (black) over a coat of red oxide primer.

Taking down galvanised tubing of 15 mm bore including cleaning for refixing in any position floor, wall etc, including S&F 15 mm bore medium grade galvanised steel tubing with all fitting and fixed complete to walls and ceiling or laid in floor, complete all as specified .

Taking down galvanised tubing of 20 mm bore including cleaning for refixing in any position floor, wall etc, including S&F 20 mm bore medium grade galvanised steel tubing with all fitting and fixed complete to walls and ceiling or laid in floor, complete all as specified .

Taking down galvanised tubing of 25 mm bore including cleaning for refixing in any position floor, wall etc, including S&F 25 mm bore medium grade galvanised steel tubing with all fitting and fixed complete to walls and ceiling or laid in floor, complete all as specified .

Taking down and refixing 15mm bore old steel tubing and connections in new or old position (walls, ceiling, floors etc.), complete all as specified .

Taking down and refixing 20mm bore old steel tubing and connections in new or old position (walls, ceiling, floors etc., complete all as specified .

Taking down chowkhat or frame n.exc 1.50 sqm with shutters (without taking of shutter from frame ) etc complete all as specified .

Taking down chowkhat or frame exc 1.50 Sqm but n.exc 4.00 Sqm with shutters (wihtout taking of shutter from frame ) etc complete all as specified .

Taking down shutter of any description n exc 1.00 sqm each , complete all as specified .

Taking down door shutter exc. 1.0 Sqm and n exc.2.0 Sqm all as complete all as specified .

S &F for solid PVC door frame (single rebated) of size 50mm x47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube complete all as specified & shown on drawing .

S&F for Factory made solid PVC doors shutter 30 mm thick(styles) consisting of frame made out of MS tube of top and bottom rails MS frame shall be covered with heat moulded plain colour PVC'C' channel having a PVC sheet strip of 20 mm width struck in side with solvent cement for styles and plain colour PVC sheet for top rail lock rail and bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour to be fitted in the MS frame welded/sealed to the styles & rails with suitable PVC sheet beading and jointed together with solvent cement , supplying & fixing in the frame at site as per specification & drawing,complete all as specified .

S&F Aluminium, anodised barrel tower bolt of extruded section of 150mm long complete all as specified

S&F Aluminium handles extruded type ,anodised of 125 mm size complete all as specified

S&F for plain, solid, straight 2nd class Hard wood chowkhats and frames, wrought, framed rebated on solid, rounded or chamferred, put together with glue pinned at joints , complete all as specified . Type of wood:- SAL/ Bilga Sal / benteak / Hollock .

M&L 30mm thick flush shutter solid core construction with block board core and plywood face panels, commercial type on both sides,complete all as specified .

S&F for 2nd class hard wood 35 mm thick Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, supplied and fitted to chowkats complete all as specified .

S&F for 2nd class HW glazed and skelton shutters 35 mm open rebated and prepared to receive glass, gauze etc (any number of sash bars) edges of framing plain chamferred or rounded fitted with mitred beads for securing glass etc sizes of member of shutter as spd in SSR Pt-1 , section 8, clause 8.20 (a) fitted to chowkhat , complete all as specified .

M & L for Framed work such as grills, grating doors or gates etc. of angle, MS sheet with ends of bars shouldered or rivetted or forged into spikes framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings for terrace, framework of watertanks and similar work confirming to Fe 290. complete all as specified .

S&F in repair Steel window with side hung shutters including box type hinges with Z section steel handle,75 mm long two nos tower bolt each shutter and steel peg stay complete with glazing bars dovetailed or welded including one coat shop zinc chrome primer complete all as specified.

S&F in repair Steel window with side hung shutters including box type hinges with Z section steel handle without glazing bars and 75 mm long two nos tower bolt each shutter dovetailed or welded including one coat shop zinc chrome primer complete all as specified.

S&F in repair Steel ventilator with top hung shutter including hinges steel peg stay including one coat shop zinc chrome primer complete all as specified.

M&L for PCC 1:2:4 , type B-1 (using 20mm graded crushed stone agreegrate) for inserting holdfasts and making good in CM 1:3, complete all as specified .

M&L for MS work as in hold fast, clamp , stay and similar articles conforming to Fe 290-O or Gde E-165, complete all as specified .

S&F butt hinges medium weight cold rolled mild steel 100mm size, complete all as specified .

S&F mild steel pressed handle oval type stove enamelled black of 125 mm, complete all as specified .

S&F for 150 mm mild steel barrel tower bolt, stove enamelled black with bright bolt of extruded section barrel type ,complete all as specified .

S&F for 250 mm size Mild steel sliding door bolt not less than 12 mm dia with and including a minimum of 6 bolt and nuts, four on bolt plate and two on staple plate , complete all as specified .

S&F in repair 300 mm ordinary rat tail rod pattern spring including roller and roller plate including necessary welding etc. complete all as specified.

Resecuring or easing& adjusting of door shutter of any description and making good paint as per with existing specification.

M&L for painting with two coats of synthetic enamel paint over one coat of pink primer on new wood based surface exc. 10 cm width or girth, complete all as specified.

M&L for painting with one coat of synthetic enamel paint after preparation of old wood or wood based surface exc. 10 cm width or girth, complete all as specified.

M&L applying two coats of synthetic enamel paint over one coat of red oxide primer on steel surfaces of any description over 10cm width or girth complete all as specified.

M&L Two coats of synthetic enamel paints on steel surfaces of any description over 10cm width or girth, complete all as specified .

S&F in repair Aluminium anodised frame and shutter for door, window, ventilators with one or more rebates including jointing cleat, anodised aluminium snap beading and glazing clips for fixing, complete all as specified.

S&F Aluminium handle 200 mm long American type fixed with screw , complete all as specified .

S&F rubber beading suitable for 5 mm thick glass fixing in aluminium window/ventilator shutter, complete all as specified .

S&F T brush for aluminium window/ventilator packing, complete all as specified .

S&F Aluminium grill 6.5 mm thick of pattern Deco DG-14 surrounding by F- channel of 1.2 mm thick , complete all as specified .

S&F in repair double action floor door spring hydraulically regulated made of minimum 1.25 mm thick aluminium alloy sheet foundation box main body with stainless steel cover,govering pivot made of mild steel heavy duty suitable for Aluminium door, complete all as specified .

S&F rollar and accessories suitable for aluminum sliding door/window and make fully fuctional complete all as specified .

S&F locking clip suitable for sliding window complete all as directed.

S&F Tubular towel rail chromium plated 20mm dia, D type 60cm long between flanges complete fixed in repair ,complete all as specified .

S&F in repair 15 mm bore bib tap high pressure PTMT, complete all as specified.

S&F 15 mm bore concealed stop valve chromium plated cast copper alloy screwed down high pressure with crutch or butterfly handle screwed down both ends for iron pipe fixed in repair, complete all as specified .

S&F in repair pillar taps, cast copper alloy, with capstan head chromium plated, screwed down high pressure with long shank and fly nut for 15 mm bore iron pipe, complete all as specified .

S & F in repair 15mm dia and 450mm long PVC connection pipe with PTMT nuts at both ends, complete all as specified .

S&F in repair vitreous china wash down closet (pedestal pattern), white (including seat cover but excluding flush pipe, flushing cistern) , including trap and drain and flushing pipe anti-syphonage pipe, seat cover etc, complete all as specified .

S&F in repair vitreous china wash down closet squatting pan (Orissa pattern), of size 630X450mm, white (excluding flush pipe, flushing cistern) , including trap and flushing pipe anti-syphonage pipe etc, making good to match the floor, complete all as specified .

S&F plastic water closet seat cover, coloured/white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device, fixed in repairs, complete all as specified .

S&F white viterous china wash hand basin flat back, size 550 x 400mm including waste coupling, PVC down pipe of incl brackets & fixed in repair complete all as specified .

S&F in repair 32mm bore PVC waste pipe for WHB, complete all as specified .

S&F for toilet paper holder recessed type stainless steel fixed in repairs complete all as specified .

S&F in repair chromium plated shower roses with or without swivel joints, size 125 mm dia including steel pipe, fixing to steel pipe or union complete all as specified .

S&F chromium plated soap dish fixed to wall complete all as specified .

S & F in repair to Waste fittings, chromium plated for sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed, complete all as specified .

S&F in repair stainless steel utensil rack 1 mm thick of size 900mmx900mm and fixing to wall with screws complete all as specified .

S & F in repair for Stainless steel sink with drainage board, 1.00mm thick for kitchen or laboratory, with plug, waste pipe, washers, including waste coupling , bedding in CM (1:4) on dwarf wall or including fixing cantilever cast iron brackets, connecting union to pipe etc., overall size 915mm x 460mm with bowl size 410mm x330mm x 160mm, complete all as specified .

M&L Urinal spreader of PTMT any colour for fixing with 15mm dia pipe (min weight 60gms), complete all as specified .

M&L Cutting chases pinning in making good to facing where required and pointing in cement mortar 1:3 to ends or cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc. 10 cm girth to brickwalls ,complete all as specified.

S & fixed in repair PVC low level flushing cistern 10 Ltr capacity syphonic action type , white with inlet ball valve float and handle including brackets complete and including PVC flush pipe 32mm bore low or high density for low level cistern ,complete all as specified .

S&F in repair vitreous china wash down water closet pan pedestal pattern white ( one piece closet) including flush pipe, flushing cistern and connection to trap and flushing pipe anti syphonic pipe etc. with plastic cover complete all as specified .

S&F chromium plated health faucet for pedestal pattern WC screwed down high pressure including 1.0 m long flexible CP pipecomplete all as specified .

S&F chromium plated jet for pedestal pattern WC with 1 m long flexible pipe screwed down high pressure complete all as specified .

S&F in repair vitreous china urinal, half stall pattern, white (excluding flushing cistern, flush pipe & waste pipe including connections to flushing pipe and outgoing pipes,complete all as specified .

S&F in repair vitreous China bowl urinals, flat back 465mmx355mmx265 mm white (minimum) with grating and union for discharging pipe excluding flushing cisturn , flush pipe, and waste pipe complete all as specified .

M&L cement concrete 1:2:4 type B-1, using 20mm graded crushed stone aggregate as in foundation, filling and mass concrete complete all as specified .

S & F venetian blinds with high density fabric of approved design and pattern including rod bracket etc. complete all as specified.

Supply and fixed in repair Brass mortice lock with handle vertical type of size 100mm , 4 levers, complete all as specified.

Dismantling & M&L for Pre-Painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws ,complete all as specified .

Dismantling and S & F Mild steel M.S work in roof truss (framed) trussed Purlins, crane gantries rails and fastenings and heavy bracket faming (beam, tee, angle, channel or flat sections) including distance pieces cleat etc confirming to Fe 290 Gde E ,complete all as specified .

Dismantling of water tanks and removing to store capacity exc 250Ltr & n.exc 500Ltr. and S&F 500Ltr capacity rotational; moulded polyetheylne water storage tank triple layer cylindrical vertical with closed top hoisted and fixed in position all as Specified in SSR PT- I ,complete all as specified .

Dismantling of water tanks and removing to store capacity exc 500 Ltr & n.exc 1000Ltr. and S&F 1000 Ltr capacity rotational; moulded polyetheylne water storage tank triple layer cylindrical vertical with closed top hoisted and fixed in position all as Specified in SSR PT- I ,complete all as specified .

Cleaning and removing all scale and dirt etc from tanks exc 250 ltr and n.exc 500 ltr capacity and from mouths of circulating pipe etc including writing in white paint on the tank complete all as specified including writing date of cleaning with paint.

Cleaning and removing all scale and dirt etc from tanks exc 500 ltr and n.exc 1000 ltr capacity and from mouths of circulating pipe etc including writing in white paint on the tank complete all as specified including writing date of cleaning with paint.

S & F in repair 20 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed(Minimum weight 210 gms) complete all as specified .

S & F in repair 25 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed(Minimum weight 455 gms) complete all as specified .

S&F in repair 1.00 mm thick steel rolling shutters, without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete push or pull , manual type, complete all as specified .

All as per item no. 127 but gear operated type with bevel gear box and crank handle.

S & F Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified .

S & F in repair Ball bearing for rolling shutters complete all as specified .

M&L expanded metal, n.exc 4.0 Kg per sqm, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members ,complete all as specified .

M&L in repair Prelaminated particle board shutter 18/19mm thick interior grade prelaminated one side and decorative choice lamination & other side balancing white lamination fixed with screws to timber framework including wooden beading lipping all around the pannel complete all as specified .

S&F Continous piano hinges, mild steel, bright finish or electro galvanised of 30mm size complete all as specified .

S&F 100 mm extruded aluminium,anodised , alloy handles, fabricated type, complete all as specified .

S&F 100 mm Hasp and staple, stainless steel,or aluminium alloy wire type, , including bolt to hinge plate and fixed with screws , complete all as specified .

S&F in repair mild steel casement stays, size 250 mm, with hinged joint and two plates, with studs complete wih necessary welding , nut bolts etc and make window fully fuctional, complete all as specified .

S&F in repair mild steel handle suitable for steel window left / right side and complete fixing arrangement with necessary welding, nut bolts, welding of hinges and make fully fuctional ,complete all as specified .

S&F in repair with welding of hinges of MS door/ window make fully fuctional ,complete all as specified .

M&L in repair for dismantling and providing E-boards, ceiling, 4 mm thick with J framed work with main Tee of size 24 x 28.5 mm made out of PGI sheet , 3 mm thick double at web and single at flange, flange coverd with powder coated sheet 0.25 mm thick and wall angle 24 x 24 x .45 mm powder coated for ceiling , ceiling boards 60cm x 60cm x 4mm thick , suspended with GI wire 2mm dia and 2m average length with adjustable hanging device complete including plugging in brick/stone walls with steel rawl plug @ 600 mm C/C Ceiling board shall be pressed to the ceiling tee with staple clips at all four sides and painted with two coats of oil bound distemper incl making good all the disturbed portion, complete all as specified .

S & F in repair for 5mm thick prelaminate PVC sheet in strips & channel feathered at the edges for fixing on Solid PVC Wall Lining, Insulated PVC Wall Lining, and Solid PVC Partitions inclusive of Solvent Cement and fixing at site ,complete all as specified .

S&F in repairs looking mirror of size 600mm x 450mmx 5.5mm fixed on 6mm thick commercial decorative water proofing ply wood with coloured PVC frame all around and hook complete all as specified .

S&F in repairs to 5.5mm thick looking mirror of exc 0.5 Sqm fixed on 6mm thick commercial decorative water proofing ply wood with coloured PVC frame all around and to be fixed on vertical wall with necessary fitting and fixtures complete all as specified .

S & F in repair 32/40 mm Bottle trap for WHB of brass chromium plated having minimum water seal of 25mm complete all as specified .

S & F in repair 10 ltr capacity PVC cistern internal fiting including adjusting of old cistern in position complete all as specified.

S & F in repair 200/250mm size galvanised wire type hasp and staple to be fixed on fixed type steel almirah by welding/drilling/nut bolt/ rebated with complete arrangement to lock to fixed almirah shutter , complete all as specified .

S&F in repair 15 mm bore bib cock chromium plated cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe in repairs, complete all as specified .

S&F in repair 15 mm bore Angle valve/ stop valves with wall flange cast copper alloy fancy type chromium plated screwed down both ends for iron pipe complete all as specified .

S & F in repair Brass mortice lock with handle vertical type of size 100 mm, 7 levers as per sample approved by GE, complete all as specified .

M&L 15mm bore Brass CP wall Mixer 3 in 1 system with provision of both hand shower & overhead shower complete (with and including hand/ Telephonic shower without overhead shower) with 115mm long bend pipe, connecting legs & wall flange for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified .

S&F 5.5 mm thick sheet glass tinted quality and glazing with oil putty /wooden beads in square n exc .5 sqm each pane up to three storey hight in aluminum door/ window with necessary rubber gasket etc. complete all as specified .

S&F cast copper alloy chromium plated 15 mm bore wash hand basin mixer for mixing hot and cold water screwed down for iron pipe and fixed ,complete all as specified .

Repair of Aluminium door/ window rearange /replacement of damaged rubber beading and tightening etc. and refixing the same opening , area of each door / window n. exc. 1.0 Sqm each including necessary required fittings and fixture complete all as specified.

Repair of Aluminium door/ window rearange /replacement of damaged rubber beading and tighttening etc. and refixing the same opening , area of each door / window exc. 1.0 Sqm but n.exc. 2.0 Sqm each incl necessary required fittings and fixture complete all as specified .

M&L for removing tree, plants from roots,from roof and wall of buildings and pouring suitable chemical as directed to avoid regrowth of tree, plants , shrubs and making good the surafce with PCC 1:2:4 , type B-1, or cement plaster of suitable thickness in CM 1:3, Complete all as specified and required at site including removing grass/shrubs from sides of tree/plant .For payment the plant shall be measured and paid

Demolition of RCC tanks on roof top of any description and in any position not otherwise specifically provided for, complete all as specified including removing rubbish off the premises all as directed.

J R ENTERPRISES

PUMA POWER

K R KAUSHAL AND SONS

R K BROTHERS