REPAIR AND REPLACED OF RAIN WATER PIPES, PLUMING AND SANITARY ITEMS AND CLEANING OF WATER AT FIELD STAITION PITTHAORAGARH

Amount

Contract Details

Taking down eaves gutters/straps and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks,etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) all as specified and directed by Engr-in-Charge.

S&F in repairs Band, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required hooks (stay), heavy, for large gates; hook and pintle hinges large hasps & staples; chains; hand made sliding bolts; clamps; hold fasts;wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles like U, L or T clamps of FI 20mmX3mm conforming to Fe-290 Gde-E-165 all as specified & directed by Engr-in-Charge.

S&F in repairs 0.63mm thick Mild steel, plain, black sheet in wall cladding, trough or strap steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required all as specified and directed by Engr-in-Charge.

S&F 110mm dia PVC (SWR) pipes double socketed, in any length with rubber ring joints, laid in trenches or in floors all as specified and directed.

S&F 110mm dia PVC (SWR) Bend any radius all as specified and directed by Engr-in-Charge.

S&F 110mm dia PVC SWR) junction single, (Single T) equal or unequal all as specified and directed by Engr-in-Charge.

Hacking out old broken glass (any thickness, size, quality or description) from metal frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads all as specifiec and directed by Engr-in- Charge. (Note : Old serviceable aluminium beads and glazing clips recovered under this item will refix under item No below.)

S&F in repairs Sheet glass, 4mm thick ordinary quality and glazing with aluminium beading/glazing clips and rubber gasket in square n exc 0.5sq. m in each pane all as specified and directed by Engr-in-Charge. Note : Cost of rubber gasket, glazing clips and minor accessories is deemed to be inclusive in unit rates, but aluminium beading will either be reused or if new then will be paid saparately under item No 8.)

All as item No 9 above but exc 0.50 sqm in each pane.

S&F in repairs rough cast, wired figured glass, 6.4mm thick and glazing with aluminium beadings/glazing clips rubber strip in squares n.exc 0.5sqm in each pane in aluminium sloping grid work in roofs of glass house all as specified an directed by Engr-in-Charge. (Note : Cost of self threased screws and small accessories is deemed to be inclusive in unit rates, however Aluminium beading will either be reused or if new then will be paid saparately under item No 8.)

All as item No 11 above but exc 0.50 sqm and n.exc 0.75 sqm in each pane.

All as item No 11 above but exc 0.75 sqm and n.exc 1.0 sqm in each pane.

All as item No 11 above but exc 1.0 sqm and n.exc 1.5 sqm in each pane.

S&F in repairs Anodised aluminium sections of 10mmX10mmX1mm, 30mmX20mm X2mm & compatible to the sections fixed on site in frame for doors,windows, Ventilators with one or more rebates including joining cleat beading for fixing etc. complete all as specified and directed by Engr-in-Charge.

Running welding not exceeding 6mm in repairs all as specified and directed.

S&F in repairs Framed work of Fe-290 (Gde E-165) as in doors or gates of hollow tubular sections compabtible as MS work on site in glass houses & poly houses with gusset plates, rails, braces, etc. complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed by Engr-in-Charge.

S&F in repairs Mild steel barrel tower bolts, 200mm long stove enamelled black, with bright bolt and fixed all as specified and directed by Engr-in-Charge.

S&F in repairs Mild steel sliding door bolts, 250mm long plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed all as specified and directed by Engr-in-Charge.

S&F in repairs Mild steel pressed handles, 150mm long oval type, stove enamelled black all as specified and directed by Engr-in-Charge.

S&F in repairs Butt hinges, 125mm long heavy weight, cold rolled mild steel, and fixed all as specified and directed by Engr-in-Charge.

S&F in repairs 550 micon milky white sheet UV protected polythene sheet suitable for polyhouses over framed structure upto 20 ft height, all as specified and directed by Engr- in-Charge.

M&L for preparing old mettalic surfaces of any description,and applying one coat of 1st quality aluminuim paint on the section n.exc 10cm width or girth in wall/ceillings srfaces all as specified and directed by Engr-in-Charge.

M&L for preparing old mettalic surfaces and applying one coat of 1st quality aluminuim paint on the section exc 10cm width or girth in wall/ceillings srfaces all as specified and directed by Engr-in-Charge.

M&L for preparing new mettalic surfaces of any description,and applying two coats of 1st quality aluminuim paint on the section n.exc 10cm width or girth in wall/ceillings srfaces all as specified and directed by Engr-in-Charge.

M&L for preparing new mettalic surfaces and applying two coats of 1st quality aluminuim paint on the section exc 10cm width or girth in wall/ceillings srfaces all as specified and directed by Engr-in-Charge.

Taking up or down 20mm dia GI steel tubing and connections, including cleaning for refixing or removal to store all as specified and directed.

. -do- all as item No 27 above but 15mm dia.

Refixing old 20mm dia GI steel tubing and connections in new or old position (Walls, ceiling, floors, etc all as specified & directed by Engr-in-Charge.

. -do- all as item No 29 above but 15mm dia.

S&F 20mm GI Tubing, 'md grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors all as speciffied and directed by Engr-in-Charge.

. -do- all as item No 31 above but 15mm dia.

Disconnecting existing tanks, exc 250 but n.exc 500 Ltr capacity setting aside (or lowering if required) for repairs,Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. and hoisting if required reconnecting and re-fixing in position all as specified and directed.

. -do- all as item No 33 above but exc 500 and n.exc 1000 ltr Capacity.

S&F 15mm dia Bib taps, cast copper chromium plated fancy type crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified and directed.

S&F in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests incl replacement of 'P' or 'S' trap lime conc bedding and making good floor complete all as specified and direcetd.

S&F in repairs PVC valveless, syphonic action type, flushing cistern, 10 Ltr capacity syphonic action type low level, white, with inlet, ball valve, float and handle including brackets

Note :-Tenderers may be noted that amount of credit will be deducted from the total amount arrived, at the time of Acceptance of contract.

M/S BHATT ENTERPRISES (BID ID -3220360)

AJA BUILDERS (BID ID -3222746)