PROVISION OF GATE WITH COLOUMN AND ASSOCIATE WORK AND OTHER SANCTIONED WORKS IN THE AREA OF AGE B/R-II UNDER GE PANAGARH

Amount

Excavation in trenches n.exc 1.5 mtr wide and n.exc 1.5 mtr in depth for foundation etc or for soft, wells, cesspits, manholes, pier hoes, etc n.exc 10 sqm on plan and n.exc 1.5 mtr in depth and getting out soft/loose soil complete all as specified and directed.

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed by Engr-in-Charge.

M&L for broken stone or boulder hard core gauge n.exc 63mm deposited, spred and levelled in layers n.exc 15cm thick, watered and rammed to a true surfaces complete all as specified and directed.

M&L for cement concrete in fdn filling and mass concrete type C2, 1:3:6 (using 40mm graded stone aggregate) complete all as specified and directed.

M&L for fly ash brick work old size bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and directed.

M&L for Rendering 15mm thick on fair faces of brick work or concrete surfaces, finished even and fair on walls in cement mortar (1:4) without using extra cement complete all as specified.

Removing excavated surplus soil exc 50mtr and depositing where directed at a level n.exc 1.5 mtr above the starting point complete all as specified and directed.

Returning, filling in including spreding, levelling, watering and well rammingin layers complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in coping including form work complete all as specified and directed.

M&L for PCC 1:3:6, type C2 (using 40mm graded stone agregate) as in surface channel and drain etc complete all as specified and directed.

Extra for forming fair finished drain or channel of manholes inner girth n exc 30cm in cement concrete using extra cement including forms, mould mitered stopped ends etc all as specified complete all as specified and directed.

Add or deduct for each 25 mm girth or part thereof over or under 30cm in cement concrete using extra cement including forms, mould mitered stopped ends etc all as specified complete all as specified and directed.

M&L for MS TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hoping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

M&L for providing precast cement concrete type 1:2:4 type B-1, (using 20 mm graded stone aggregate) as in landing, cover slab (for manholes etc) chullah woods, chajjas, water trough mangers, shelves, and similar articles with plain faces complete all as specified and directed.

M&L for PCC 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.

M&L for M-25 (Design mix) using 20mm graded stone aggregate as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concret complete all as specified and directed.

M&L for M-25 (Design mix) using 20mm graded stone aggregate Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M&L for M-25 (Design mix) using 20mm graded stone aggregate Columns, pillars, piers, posts and struts complete all as specified and directed.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished surface of concrete complete all as specified and directed.

Formwork to sides of pillars, posts, struts, piers, columns and stanchions for fair finished surface of concrete complete all as specified and directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. for fair finished surfaces of concrete complete all as specified and directed.

M&L for Mild steel bars 6 to 8mm dia as in stirrups cut to length, stirrups, spacers and binders required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clip complete all as specified and directed.

Supply only intergral water proofing compound (liquid admixture) complete all as specified and directed.

M&L for Glazed vitrified high depth elevation ties of size 300 X 450mm or 300 x 600 mm, 9 to 12mm as in vertical surfaces such as column , standard pillar tile wall etc set and jointed in neat cement slurry , finished with flush pointing in white cement or coloured cement to match over backing coat of 10mm thuick in cement mortar (1:3) complete all as specified and as directed Note: Design, shade and pattern of fixing of tiles shall be as directed and approved by GE

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing (FE 410-W-Gde-250A) complete all as specified and directed.

M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of zinc chromate primer complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. (Make: M/s Apex Ultima of Asian/ Weather Coat all guard of Berger/Xtra Tough of Shalimar)

S&F 605x605 Anodised aluminium snap grid frame work for false ceiling with all necessary aluminium angle & Tee arrangement with and incl fixing cleats screws etc, complete all as specified and as directed.

S&F Hangers 4mm dia GI (upto 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60 mm long, complete all as specified and as directed.

S&F for 4 mm thick 'E' board (non asbestos fibre) designer building boards fixed in aluminium frame work in ceiling flat or sloping with screws, complete all as specified and as directed.

M&L for Joist, channel, angle or tee sections, FE-410W (Gde-E-250) Quality B fixed independently, without connecting plates, etc (cut to ordinary lengths i.e. within 20mm of the length indicated, complete all as specified and as directed.

Excavating in post holes (or similar holes) in soft/loose soil, each n.exc 0.5 cu.m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n.exc 50 m and making good surface, complete all as specified and directed

Excavating in post holes (or similar holes) as in Hard Rock, each n.exc 0.5 cu.m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n.exc 50 m and making good surface, complete all as specified and directed

M&L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. (Fe-410W Gde-E-250 Quality B) complete all as specified and directed

S&F wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed

S&F Rolled Mild steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment (Fe-410W Gde-E-250 Quality B) complete all as specified and directed

S&F Pre-painted galvalume aluminum zinc coating @150 GSM GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, all as specified and as directed.

S&F Pre-painted galvalume aluminum zinc coating @150 GSM GI based Plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed

S&F for Mild steel screw bolts (machine made) with hexagonal or square heads (Diameter of neck 16 to 20mm) at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 5cm but n.exc 10 cm long complete all as specified and directed

Excavating in post holes (or similar holes) each n.exc 0.5 cu m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified & directed

M&L for 100mm thick PCC 1:4:8, type D-2 (using 40mm graded stone aggregate) in sub base of floor/paving etc complete all as specified and directed.

M&L for machine pressed precast conctete pre-polished interlocking paver block (coloured) any shape and size conforming to IS:15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment complete all as specified and directed.

M&L for providing cement concrete 1:2:4 (using 20 mm graded stone aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.

ANSH CONSTRUCTION

BISWAS ENTERPRISE

M/S TILKU ENTERPRISE

M/S S M ENTERPRISE

SINGH CONSTRUCTION

M/S GLOBE ENTERPRISE

Jaibalaji Enterprise

M/S SEHGAL CONSTRUCTION