REPAIR/MAINT TO HARDSTANDING PATH WALL FENCING DRAINS AND OTHER MISC ITEMS AND CULVERTS AT OTM AND MD ACCN UNDER AGE B/R-I OF GE(N) AT PATIALA MIL STN) AT PATIALA MIL STN

Amount

Dismantling of post or struts (wood or steel or RCC) any section incl taking embeded portion and making good disturbed ground embeded in concrete complete all as specified and as directed.

Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface complete all as specified and as directed.

M/L PCC 1:4:8 using 40 mm graded stone aggregate as in foundation filling and mass concrete for fixing RCC/ any fencing posts complete all as specified and as directed.

S&F MS angle iron posts and struts, flat & round bars in fencing including cutting tops to shape as directed, drilling holes, notching for wire, bolting etc and similar works like MS flat iron fillets confirming to Fe-290 Gde E-165 complete all as specified and as directed

Preparation of new steel surfaces any width or girth not otherwise described and applying two coats synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

M&L providing RCC Type B1 1:2:4 (20 mm graded stone aggregate) as in pre cast fencing post struts etc average sectional area exc 100 Sqcm and not exceeding 250 Sqcm with or mitred Tops incl grouting in natural ground or cement concrete complete all as specified and as directed.

S/F TMT bars 10 mm dia and over, cut to length, bent to shape as required incl cracking bending hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia, complete all as specified and as directed

S/F TMT bar 5 mm dia and over upto and incl 10 mm dia in , stirrups spacers etc cut to length bent to shape requred incl cranking, bending hooking ends binding with mild steel wire (annealed) not less than 0.9 mm dia confirming to Grade-I IS-432 (part I) complete all as specified and as directed.

Dismantling fencing wire mesh, any type complete all as specified and as directed.

S&F Chain link fencing comprising plain GI wire mesh 3.15 mm dia and average size of mesh 100 x 100mm, including link wire nails, straining bolts etc and Provision of binding wire as specified after taking out old unserviceable mesh wire of any description complete all as specified and as directed.

Fixing in repair old chain link fencing incl line wires, any mesh, size and any type to any type of standards, rails, straining bolts etc incl provn of binding wire complete all as specified and as directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and as directed.

Dismantling fencing barbered wire complete all as specified and as directed.

S/F in repair Galvanized 2 strand steel barbed wire 2.24 mm dia barbed wire with 2 mm dia barbs at 75 mm spacing straining, tightening and fixing to MS nibs embeded in pre cast RCC/AI fencing post struds etc securing and typing as crossing with and provision of galvanized mild steel wire complete all as specified and as directed

S/F mild steel screw bolt 05 to 10 mm dia (machine made) with hexagonal head at one end and screwed the other, screwed end to be fitted with one washer and hexagonal nut length exc 10cm but not exc 15cm long complete all as specified and as directed.

S/F mild steel screw bolt 11 to 15 mm dia (machine made) with hexagonal head at one end and screwed the other, screwed end to be fitted with one washer and hexagonal nut length exc 10cm but not exc 15cm long complete all as specified and as directed.

M & L for PCC with type D-2 1:4:8 (40 mm graded aggregate ) 100 mm thick as in sub base complete all as specified and as directed.

Demolition of brick work including all quoins arches pillars etc built in cement mortar complete all as specified and as directed.

M&L brick work with subclass B bricks, straight or curved on plan exc 6m mean radious built in CM 1:6 complete all as specified and as directed.

M & L for platering 15mm thick in cement mortar 1:4 on EXTERNAL fair faces or Brick walls or on concrete surfaces plastered surfaces finished even and smooth without using extra cement as per manufactare instruction complete all as specified and directed.

Supply only Water proofing compound complete all as specified and as directed.

M & L Providing cement concrete with type B0 1:2:4 using 12.5mm graded aggregate as in coping and the like including for use of form work (straight or curved) weathering slightly rounded or chamferred angles and throating complete all as specified and as directed.

Taking down Cement plaster or cement lime plaster on brick or stone walls incl raking out joints hacking for key & scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of Plastered surfaces of walls and applying two coats of cement base paint complete all as specified and directed by Engineer-in-Charge.

Dismantling of Bricks (laid flat or on edge) or brick tiles in floors, channels, kerbs, aprons, etc. (each layer) complete all as specified and as directed.

Rough excavation not exceeding 1.5 m deep and getting out soft/loose soil and getting out complete all as specified and as directed.

Demolition of cement concrete (unreinforced) of any descriptions, in Ground floors (Floor Topping, Sub Base etc) not exc 150mm thick, above or below ground level complete all as specified and directed.

M & L hardcore of gauge n exc 63mm deposited spread and leveled in layer not exc 150 mm thick water, rammed to true surfaces complete all as specified and as directed.

M & L for PCC with type D-2 1:4:8 (40 mm graded aggregate ) 75mm thick as in sub base complete all as specified and as directed.

M & L for PCC with type B-0. 1:2:4 (20mm graded aggregate) 40 mm thick as in flooring and finishing the floor even and smooth without using extra cement complete all as specified and as directed.

M&L Machine pressed rubber moulded ISI marked precast cement concrete interlocking paver block any shape and size and of colour 50% red coloured tiles and 50% grey coloured tiles confirming to IS-15658-2006 of 60mm thickness M-35 Grade and including filling of interstices with fine sand over including 25mm thick layer of sand chusion complete all as specified and as directed.

Machine made kerb stones, prepolished, rubber moulded in cement concrete 1:½:3 type A-1 using 20mm graded crushed stone aggregates, hydraulically pressed laid in trenches including necessary earth work in any type of soil including setting & jointing in cement mortar 1:4 complete all as specified and directed. NOTE: Shape of kerb stone shall be approved by the GE. Make of tile : NTC(A-ONE) Panchkula / NITCO DELHI / M/S Unistone Products Ltd /SARAL PATIALA

M&L for sand filling under floor or below blocks incl watering and consolidation complete all as specified and as directed.

M & L Providing cement concrete with type B0 1:2:4 using 12.5mm graded aggregate as in coping and the like including for use of form work (straight or curved) weathering slightly rounded or chamferred angles and throating complete all as specified and as directed.

Removing excavated material n exc. 50 m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed.

Dismantling brick laid beded and pointed in any mortar (laid flat or on dege) complete all as specified and as directed.

M&L for brick work with sub class 'B' brick old size straight & curved on plan to any radius in half brick thick wall built in CM 1:4 with pointing complete all as specified and as directed.

Demolition of brick work including all quoins arches pillars etc built in cement mortar complete all as specified and as directed.

M & L brick work with sub class 'B' brick straight of curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and as directed.

Taking down cement plaster of any description on Brick Walls, concrete surfaces including racking out joints, hacking for key, scrubbing down with water, remove dust, debries/rubbish etc complete all as specified and as directed.

Rendering 15mm thick in Cement Mortar 1:4 externally on other than fair faces of brick wall or on Concrete Surfaces, finished Even and Smooth without usigng extra cement, complete all as specified and as directed.

Supply only Water proofing compound complete all as specified and as directed.

M & L for reinforced concrete pipes of 300 mm dia, class NP3, laid and jointed complete with collars and jointed complete in cement mortar (1:1) complete all as specified and directed by Engr-in-charge.

M & L for Concrete bed to drain pipes including packing under and haunching against the sides of pipes with concrete after they are laid and tested, in Cement concrete 1:4:8 type D2 for Pipes 300 mm dia class NP3 complete all as specified and directed by Engr-in-charge

M&L for reinforced concrete pipes of 600 mm dia, class NP3, laid and jointed complete with collars and jointed complete in cement mortar (1:1) complete all as specified and directed by Engr-in-charge.

M & L for Concrete bed to drain pipes including packing under and haunching against the sides of pipes with concrete after they are laid and tested, in Cement concrete 1:4:8 type D2 for Pipes 600 mm dia class NP3 complete all as specified and directed by Engr-in-charge

m/s panchmukhi builders

Buttar Construction Co.

Nanotech Construction