Special repair of building No. P 161 and certain Revenue works at Old Cantt and Fort Cantt Under GE (East) Allahabad.

Amount

Surface excavation not exceeding 30cm deep & averaging 15 cm deep in soft / loose soil and getting out complete all as specified & directed.

Excavation in trenches not exceeding 1.5m deep & not exceeding 1.5m wide or area not exceeding 10 Sqm on plan& depth not exceeding 1.5 m in any type of soil and getting out for foundation, trenches for laying of electric cable or pipes complete all as specified & directed.

Returning, filling in, excavated soil including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick complete all as specified & directed.

Removal of excavated materials (soil) to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified & directed.

Demolition of brick work built in cement or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing, dresssed stone work and precast concrete atrticles and removing from site complete as specified & directed.

Demolition of Concrete work in any description and in any position and removing rubbish from site complete as directed by Engineer-in-Charge.

Taking down cement plaster on brick or stone walls or wall tiles etc including raking out joints, hacking for key, scrubbing down with water etc including removal of rubbish off the premises complete all as specified & as directed.

Dismantling of AC corrugated or semi corrugated sheet including AC ridges as in roof covering complete all as specified & directed.

Supply & Fixing in repair Suspended false ceiling using Chicago E-boad of Make : Everest / Armstrong or equivalent make approved design "Lake & Hill" of size of grid 605mm x 605mm x 4 mm thick white pre-laminated self embosed, texture designed board, water resistant, fire resistant & termite resistant for Insulation and accoustic purpose to be placed on at any height on hot dipped galvanised iron imposed grid with 24 mm wide T section powder coated, the frame work shall comprises of main runner made with 0.35 mm thick GS sheet and of size 24x32x300mm spaced at 1200 mm maximum centre to centre fixed to structral soffits with hangers of 4 mm dia GI wire to be fixed with rawl plugs, adjusted with screws, flush fittings of 1200 mm long cross Tee with double stiching to be interlocked between main runners at 600 mm c/c from cross Tee more than 600 mm to be suported independently and double to be formed by fittings 600 mm long cross tee centrally between the 1200 mm cross tee, perimeter wall angle shall be of 0.45 mm thick GS sheet of size 19x19 mm and 300 mm long of white colour including making hole in board for provison of light fittings complete all as per manufacturer Instructions & directed.

Material & Labour PCC 1:4:8 type D-2 using 40 mm graded crushed stone aggregate as in foundation filling or mass concrete or similar wrok complete all as specified & directed.

Material & Labour for PCC 1:3:6 type C-2 using 40mm crushed stone aggregate as in surface channel of drain or PCC drain complete all as specified & directed.

Material & labour for extra for forming fair finished surface for drain or channel 30 cm inner girth in cement concrete using extra cement including forms moulds mitred edges / stopped ends etc complete as specified & directed.

Material & Labour for PCC 1:3:6 type C-1 using 20mm crushed stone aggregate as in fixing of hold fasts including necessary form work if required complete as specified & directed.

Material & Labour for PCC 1:2:4 type B-0 using 12.5mm crushed stone aggregate as in roof kerbs / Coping / padding or in levelling course, benching or bedding layers etc finished even & fair chamfered edges complete as specified & directed.

Material & Labour for reinforced cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in chajjas or kitchen shelves, cantilever or supported on walls or similar works complete as specified & directed.

Material & Labour form work to soffits of suspended slabs such as roof slabs, floor slabs, landings slab and similar work; not exceeding 200 mm thick (Horizontal or slopping) fair finished flat surfaces complete all as specified & directed.

Material & Labour mild steel TMT bars 8-10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified & directed.

Material & Labour 25 mm thick PCC 1:2:4 type B-0 using 12.5mm crushed stone aggregate as in floor finish or base of floor, surface finished even & fair for base of tiles or leveling course complete all as specified & directed.

Material & Labour for Non Skid Jointless ceramic light coloured tiles 7-8mm thick [premium quality] (square or rectangular) area of each tile exceeding 0.11 Sqm and not exceeding 0.18 Sqm, laid in floors set and jointed in neat cement slurry and pointed in white cement mixed with colouring pigment to match the colour or shade of tiles over & including 15 mm thick Screed bed or bedding layer in cement sand mortar in 1:6 for laying of ceramic tiles complete all as specified & directed.

Material & Labour for Glazed ceramic coloured tiles [premium quality] as in vertical surface of walls such as skirting / dado and risers to steps, size of tile 450x300mmx7mmm or 350x250x7mm thick set and jointed in neat cement slurry and pointed in white cement mixed with colouring pigment to match the colour or shade of tiles over & including 10 mm thick rendering as in backing of tiles in cement mortar in 1:4 complete all as specified & directed.

Material & Labour 18-20mm thick machine cut green marble [Baroda green marble] with granite polish stone slab as cooking plateform laid over and including cement screed bed or base 15mm thick in CM 1:6 laid and jointed with cement slurry mixed with colouring pigment to match the colour or shade of slab and rounding the outer edge with grinder complete all as specified & directed.

Material & Labour for brick work with fly ash bricks [crushing strength not less than 75 Kg per Sqcm] straight or curved on plan exceeding 6 m mean radius built in cement sand mortar 1:6 complete all as specified & directed.

Supply Only Integral water proofing compound ISI marked.

Material & Labour for 15 mm thick rendering on fair faces of brick work or concrete surfaces in cement sand mortar 1:4, finished surface even and smooth without using extra cement complete all as specified & directed.

Material & Labour for 15 mm thick rendering on fair faces of brick work or concrete surfaces in cement sand mortar 1:6, finished surface even & fair complete all as specified & directed.

Material & Labour for 80 mm thick machine Pressed precast cement concrete interlocking moulded paver block rubberised any shape & size conforming to IS : 15658 - 2006 of M-40 Grade with grey cement & pigment over and including average 30-40 mm thick sand cushioning complete all as specified & directed.

Taking out old rusted or damaged 15 mm bore galvanised steel water tubing & connections for cleaning or re-fixing if required complete as specified & directed.

Taking out old rusted or damaged 20 mm bore galvanised steel water tubing & connections for cleaning or re-fixing if required complete as specified & directed.

Supply & Fixing 15 mm bore galvanised steel water tubing medium grade for water supply pipes & connections with all fittings such as sockets, elbows, unions, Tees & short length etc and fixed to walls with steel hooks or laid in floors in any length complete as specified & directed.

Supply & Fixing 20 mm bore galvanised steel water tubing medium grade for water supply pipes & connections with all fittings such as sockets, elbows, unions, Tees & short length etc and fixed to walls with steel hooks or laid in floors in any length complete as specified & directed.

Supply & Fixing 15 mm bore [Except GI tubing] galvanised steel water tubing for water supply pipes & connections with all new fittings such as sockets, elbows, unions, Tees & short length etc and fixed to walls with steel hooks or laid in floors in any length complete all as specified & as directed. Note : Old serveciable GI pipe shall be used in work with new fittings.

Supply & Fixing 20 mm bore [Except GI tubing] galvanised steel water tubing for water supply pipes & connections with all new fittings such as sockets, elbows, unions, Tees & short length etc and fixed to walls with steel hooks or laid in floors in any length complete all as specified & as directed. Note : Old serveciable GI pipe shall be used in work with new fittings.

Material & Labour for Cutting chases in brick walls, pinning in making good to facing required and pointing in cement sand mortar in 1:3 to ends or edges of landing, steps, cills, shelves, lintels and cutting chases for concealed water tubing or conduit wiring and making good cutting not exceeding 10 cm width or girth complete all as specified & directed by Enginer-in-Charge.

Supply & fixing in repair 500 Litre capacity rotational moulded polyethylene water storage tanks (cylindrical or vertical with closed top) hoisted and fixed in position including necessary connections to inlet / outlet & wash out pipes, including PTMT with epoxy coated aluminium rod & high density ball valve 20 mm dia screwed for iron pipe complete as specified in SSR Part-I complete all as specified & directed.

Supply & fixing 20 mm bore gun metal gate valve with iron wheel head screwed both ends complete all as specified & directed.

Supply & Fixing in repair chromium plated soap tray / soap dish [size 100x 60 mm] fixed with steel screws on walls complete as specified.

Material & Labour in repair cast iron soil waste & vent pipe having 100 mm internal dia pipes single socketed ends, in any length with or with out ears with & including cement spun yarn joints, fixed to walls with steel clamps complete as specified & directed.

Material & Labour in repair cast iron soil waste & vent pipe having 75 mm internal dia pipes single socketed ends, in any length with or with out ears with & including cement spun yarn joints, fixed to walls with steel clamps complete as specified & directed.

Supply & Fixing in rerpair PVC (SWR) floor trap 75 mm dia of out let plain with CP grating 90 mm round with or without centre hole for making connection of pipes, jointing with cement solvant or adhesive complete all as specified & directed.

Supply & Fixing in repair 15mm bore bib tap cast copper alloy fancy type chromium plated with capstan head handle screwed down for iron pipes or for brass ferrule complete all as specified & directed.

Supply & Fixing in repair 15mm bore stop valves fancy type Chromium plated (concealled type) cast copper alloy screwed down high pressure with capstan headed handles screwed both ends for iron pipe or for union complete all as specified & directed.

Supply & Fixing in repair 15 mm bore Angle Valves brass chromium plated fancy type screwed down high pressure with capstan head handle screwed two ends for iron pipe or for unions complete all as specified & directed.

Supply only in repair 15mm bore Pillar tap cast copper alloy fancy type swan neck type chromium plated screwed down high pressure with or without lettered HOT or COLD with long screwed shanks and fly nuts screwed for iron pipes complete all as specified & directed.

Supply & Fixing in repair chromium plated shower rose fancy type with swivel joints fixed to 15mm bore pipe complete all as specified & as directed.

Supply & Fixing in repair sheet glass corner shelf assembly consisting of 5 mm thick sheet glass having 450 mm long chromium plated bracket guard round shaped railing fixed with steel screws on wall complete all as specified & as directed.

Supply & Fixing in repair sheet glass shelf assembly consisting of 5 mm thick sheet glass shelf 120mm wide with & 600 mm long chromium plated bracket guard nad railing fixed with steel screws on wall complete all as specified & as directed.

Supply & Fixing PVC connection 15mm size with brass fly nuts on both ends of length 450mm complete all as specified & directed.

Supply & Fixing in repair 600 mm long 20 mm dia "D" type chromium plated tubular towel rail between flanges fixed with steel screws complete all as specified & directed.

Supply & Fixing in repair vitreous china wash hand basin white flat back of size 550x400mm excluding chain & plug and porcelain stopper but including brackets, PVC waste pipe 32 mm bore 600mm long, chromium plated waste coupling 32 mm dia long shank complete as specified & directed

Supply & Fixing in repair vitreous china squatting pan white orissa pattern of size 580 x 440 mm with Integral foot rests (excludig flushing cistern & flush pipe) with VC trap and make good to match with the existing surface of floor complete all as specified & as directed by Engineer-in-charge.

Supply & Fixing in repair position vitreous china water closet pedestal pattern (excluding flushing cistern & flush pipe) and making good to match with the existing surface of floor complete all as specified & directed.

Supply only plastic seat cover white colour for closed pattern with flat bottom and cover with mild steel chromium plated hinging device complete all as specified & directed.

Supply & Fixing in repair CP Nozzle or Jet spray with flexible threaded tube 1200 mm long fitted of suitable devices on EWC pan complete all as specified & directed.

Material & Labour 100 mm round CP grating with or without centre hole grating fixed with adhesive or cement solvant complete all as specified & directed.

Supply & Fixing in repair 10 litre capacity PVC valveless syphonic action type low level flushing cistern white colour including 32 mm bore flush pipe 600 mm long, cantilever brackets PVC ball valve, float and PVC handle complete all as specified & directed.

Supply & fixing in repair 40 mm PVC low density polythelyne pipe [LDPE] of pressure rating 6 Kgf per Sqcm fixed to walls or floors or fixed in WHB or sinl complete all as specified & directed.

Taking down chowket or frame with shutter (without taking off shutters from the frame) area not exceeding 1.5 Sqm each complete all as specified & directed.

Taking down chowket or frame with shutter (without taking off shutters from the frame) area exceeding 1.5 Sqm & not exceeding 4.0 Sqm each & removing from site complete all as specified & directed.

Supply & Fixing solid PVC door frame of size 50 mm x 47 mm made out of 5 mm single side prelam PVC sheet & edges will be printed to match with prelam sheet reinforced with MS square tube complete all as specified & directed.

Material & Labour for 30 mm thick Factory made PVC solid panel door shutter (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having PVC sheet strip of 20 mm width stuck inside with solvent cement for styles and Plain colour PVC sheet for top & bottom rail, lock rail & bottom rail on either side and as gap insert for top & bottom rail; penelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement complete all as specified & directed.

Supply & Fixng 32 mm thick flush door shutters, solid core construction, with block board core and ply wood face panels, commercial type ply on both faces complete all as specifed & directed.

Supply & Fixing 35 mm thick second class hard wood glazed and skelton door shutters, open rebated and prepared to receive glass / gauze etc divided into squares or rectangluar with plain, chamfered or rounded mitered edge beads for securing glass/ gauge complete all as specified in SSR Part 1-1991 section 8 clause 8.20 (a) complete all as specified & directed.

Supply & Fixing in repair steel window factory made with side hung shutter including box type hinges with steel handle, steel peg stay, complete with glazing bars, dovetailed or welded joint complete all as specified & directed.

Supply & Fixing in repair steel window factory made with side hung shutter including box type hinges with steel handle, steel peg stay, complete with out glazing bars, dovetailed or welded joint complete all as specified & directed.

Supply & Fixing in repair steel ventilator factory made with top hung shutter including hinges with steel handle, steel peg stay, dovetailed or welded joint complete all as specified & directed.

Supply & Fixing 3mm thick sheet glass (Pin headed or figured glass) ordinary quality and glazing with oil putty or wooden beads in a square not exceeding 0.5 Sqm in each pane complete as specified & directed.

Supply & Fixing 3mm thick sheet glass frosted at one side and other plain sheet glass ordinary quality and glazing with oil putty or wooden beads in a square not exceeding 0.5 Sqm in each pane complete as specified & directed.

Supply & Fixing stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.4 mm and fixed with tinned tacks or galvanized steel wire staples / beads in wooden or steel window complete all as specified & as directed.

Supply & Fixing 100mm long mild steel butt hinges medium weight cold rolled with steel pin hinge and fixed with steel screws complete all as specified & directed.

Supply & Fixing 100mm long butt hinges extruded aluminium alloy with steel hinge pin anodised type B-11 and fixed with steel screws complete all as specified & directed.

Supply & Fixing 150mm long extruded aluminium anodised alloy handle cast type and fixed with screws complete all as specified & directed.

Supply & Fixing 200mm long extruded aluminium anodised alloy barrel tower bolt fixed with screws complete all as specified & directed.

Supply & Fixing in repair 25 mm dia fancy type draphery or curtain rods PVC coating with ends brackets decorative type cut to length as required size, colour coating including matching socketed brackets with PVC rings [eight numbers in each RM] complete all as specified & as directed.

Supply & Fixing aluminium alloy anodized sliding door bolt with hasp & staple (clip & bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts or extruded sections or cast aluminium alloy length of bolt 250mm long complete all as specified & as directed.

Material & Labour for preparation the base of new plastered surface of walls by applying 1 mm thick Birla or JK wall care putty to wall surface and rubbing with sand or emery paper of required size to achive smooth surfacre of wall and than apply two coats of oil bound distemper [Acrylic] on wall surfaces of approved colour complete all as specified & directed.

complete removal of existing treatment of walls with steel scrapper or steel wire brushes and cleaned the plastered surface and applying 1 mm thick Birla or JK wall care putty toentire wall surface and rubbing with sand or emery paper of required size to achive smooth finished surfacre of wall and than apply two coats of oil bound distemper [Acrylic] on wall surfaces of approved colour complete all as specified & directed.

complete removal of existing treatment of walls with steel scrapper or steel wire brushes and cleaned the plastered surface and applying 1 mm thick Birla or JK wall care putty toentire wall surface and rubbing with sand or emery paper of required size to achive smooth finished surfacre of wall and than apply two coats of cement base paint on wall surfaces of approved colour complete all as specified & directed.

Material & Labour for preparation of new plastered surface of walls with sand or emery paper and apply two coats of cement base paint complete all as specified & directed.

Material & Labour for preparation of old plastered surface of walls with sand or emery paper and apply two coats of cement base paint complete all as specified & directed.

Material & Labour for preparation of new steel surfaces of any description over 10 cm width or girth & applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified & directed.

Material & Labour for preperation of new wood or wooden based surface with sand or emery paper of any description over 10 CM width or girth applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified & directed.

Supply & Fixing mild steel work such as hold fast with flat iron for fixing of door frames and similar work complete all as specified & directed.

Supply & Fixing rolled mild steel section conforming to Grade Fe-410-0 or Fe-310-0 as in framing for cladding, glazing and the like including door frames / chowkats or cooler stands, fixed with angle iron, cleats and connecting plates etc including necessary cutting bending welding if required complete all as specified & directed.

Supply & Fixing rolled mild steel framed work conforming to Fe-290 (grade E-165) as in door or gates of angle or other section with gusset plates; rail braces complete drilled for fixing of steel sheets of any thickness or other covering doors to be prepared for hanging or sliding with and including either hooks or hinges or steel hanging door fittings complete all as specified & directed.

Material & labour for mild steel framed work such as grills, gratings with ends of bars shouldered and or riveted, or forged into spikes; framed guard bars, railings, hold fasts or similar work complete all as specified & directed.

Supply & Fixing Pre-painted galvalume aluminum zinc coating (AZ-150) GI based corrugated steel sheet 0.50mm thick, coloured having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws at every alternate corrugation complete all as specified & directed.

Supply & Fixing Pre-painted galvalume aluminum zinc coating (AZ-150) GI based Plain sheet 0.50mm thick coloured having tensile strength of 550 Mpa as in roof covering & ridges or valley gutter fixed with self tapping screws at every alternate corrugations complete as specified & directed.

Material & Labour second class hard wood [SAL wood] as in scantling clean sawn timber fixed unframed work including two coats of creosote oil on outer edge of scantling including taking out old damaged corroded timber complete all as specified & directed.

Taking down carefully point wiring of any type and any description / caping or concealed [light point, fan point or socket point] including removal of battens, pipes, plug sockets, switches, shades, ceiling roses, light fittings etc complete and making good disturbed surface to match the exisitng complete all as specified & directed.

Taking down carefully sub main wiring of any nos of wire with wire on wooden batten or surface conduit or concealed conduits complete all as specified & directed.

Taking down main switches, distribution boards and cut outs of any capacity along with the exisitng boards and removing the same from site and making good disturbed surface or portion of walls complete all as specified & directed.

Material & Labour for concealed Point wiring with PVC Insulated 1.5 Sqmm multi-stranded copper conductor FRLS cable 1100 Volts grade drawn into and including concealed PVC conduit medium grade not less than 20mm dia (ISI marked) including all fitting and fixings accessories including 1.25 mm thick factory fabricated sunken pressed steel terminal boxes duly painted with one coat of anti-corrosive paint outside and two coats of aluminium paint inside with and including 2.8 mm thick top cover hylam brand plastic laminated white sheet cover for mounting switches, sockets, fan regulators fixed with steel screws with cup wahsers and including PVC Insulated 1.5 Sqmm multi-strand copper conductor cable as earth wire and making good the disturbed surfaces to match with the existing surfaces complete all as specified and directed for following poit wirings:---

(a) One light / fan point controlled by one switch

(b) One socket point 3 pin switch socket out let 5 Amp controlled by one switch on same board.

(c) One socket point 3 pin switch socket out let 5 Amp controlled by one switch on Independent board.

Description same all as per item No. _93_ here in above but with 1100 Volts grade copper stranded conductor FRLS cable of size 2.5 Sqmm with 1.5 Sqmm multi-strand copper conductor cable as earth wire for 3 pin switch socket outlet 15 Amp Independent board complete all as specified & directed.

Supply & Fixing switch piano flush type single pole one way 5 Amps flush type complete all as spicified & directed.

Supply & Fixing socket out let 3 pin 5 Amps complete all as spicified & directed.

Supply & Fixing Switch socket combination 2 in 1, 3 pin / 5 Amp and 15 Amps flush type of polycabonate body complete all as specified & directed.

Supply & Fixing Ceiling rose surface bakelite type 60x30 mm three terminals of polycarbonate body complete all as specified & directed.

Supply & Fixing lamp holder insulated body with back plate suitable for batten fittings complete all as specified & directed.

Supply & Fixing electronic fan regulator flush type suitable for ceiling fan complete all as specified & directed.

Material & Labour for Sub main wiring with two single core PVC Insulated cable two run of size 4 Sqmm multi-stranded copper conductor FRLS cables drawing into and including PVC conduit, medium grade not less than 25 mm dia with all conduit accessories and one run of 2.5 Sqmm multi-strand copper conductor FRLS cable as continuous earth wire complete all as specified and directed. Note : - Two run of 4 Sqmm & one run of 2.5 Sqmm cable shall be measured as one unit run.

Supply & Fixing 1x18 watt four feet long decorative box type [Ultra slim] linear LED [6000K] batten light fittings with extruded aluminium body heat shrink, envoirement friendly, energy efficient prewired and making necessary electric connection from ceiling rose with 23/.0076 flexible three core copper wire 1.0 RM long & fixed to wall firmly complete all as specified & directed by Engineer-in-Charge. Make : Endura Linear NEO 18 Watt of Havells or equivalent make in Philips / Crompton or Bajaj as approved by GE.

Supply & Fixing 1x10 watt Mirror light decorative box type [Ultra slim] linear LED [6000K] batten light fittings with extruded aluminium body heat shrink, envoirement friendly, energy efficient prewired and making necessary electric connection from ceiling rose with 23/.0076 flexible three core copper wire 1.0 RM long & fixed to wall firmly complete all as specified & directed by Engineer-in-Charge. Make : Endura Linear NEO of Havells or equivalent make in Philips / Crompton or Bajaj as approved by GE.

Supply & Fixing 10 watt LED bulk head light fittings with enclosed in polycarbonate body weather proof with co-extruded poly carbonate body, envoirement friendly, energy efficient prewired and making necessary electric connection from ceiling rose with 23/.0076 flexible three core copper wire & fixed to wall firmly complete all as specified & directed by Engineer-in-Charge. Make : Philips Endura LED-Bulkhead Cat No. WT202W LED 6S CW SI PC or equivalent make in Havells / Crompton or Bajaj as approved

Supply & Fixing Building security / street LED light fitting 35 watt IP-65 protection making electrical connection with 2.5 Sqmm twin core copper wire 1.5 long complete fixed with 40 mm dia MS pipe medium grade bracket [1.2 m long & bent to required shape] and fixed with flat iron 40x6 mm clamp two nos with nut bolts & washers as required fixed to pole or walls complete all as specified & directed. Make : Phillips Cat No BRP409 LED CW 036 MR FG S1 PSU GR or equivalent make in Bajaj / Havells / Crompton as approved by GE.

Supply & Fixing recess mounted decorative 38 watt LED light fittings of size 600 mm x 600 mm having Lumen 2800-6500 K high brightness including suitable driver, envoirement friendly, energy efficient pre-wired and making necessary electric connection from ceiling rose with 23/.0076 flexible three core copper wire complete all as specified & directed. Make : Philips Model Full Glow Cat Part No. RC-380BLED35S-6500G4L60W60PSU OD / Crompton Cat Part No. LCTLSN-36-CDL(2x2) / Bajaj / Philips.

Supply & Fixing in repair sheet metal enclosure MCCB DB's double door [Acrylic], triple pole and neutral vertical type, 415 Volts 4 way with 200 Amp rated bus bars, including MCCB 160 Amp TPN breaking capacity 25 KA with thermal magnetic release as incommer and 06 [Six] numbers MCB SP 6-32 Amp breaking capacity 10 KA as out going with blanking plate wherever required and IP-43 degree protection and making necessary electrical connection with lugs complete all as specified & directed.

Supply & Fixing sheet metal enclosure MCB DB double door [Acrylic], single pole and neutral, 240 volts, 8 way with 200 Amp, 10 KA breaking capacity rated bus bar with blanking plate wherever required and IP-43 degree protection complete all as specified & directed.

Supply & Fixing MCB Single Pole 240Volt, 6 to 32Amps,10KA breaking capacity "B" curve ISI marked complete all as specified & directed.

Supply & Fixing MCB Single Pole and Neutral 240Volt, 32 Amps,10KA breaking capacity "B" curve ISI marked complete all as specified & directed.

Supply & Fixing 300 mm sweep exhaust fan with louvers high speed copper wound motor suitable for 230 volt AC supply heavy duty complete with steel body and making necessary electric connection with ceiling rose with copper wire of suitable size complete all as specified & directed.

Supply, fixing, testing & commissioning of centrifugal pump set of capacity 30KW / 40 HP three phase 415 Volt 3000 RPM suction & delivery size 125 mm x 100 mm water head 35 RM & discharge head 3000 LPM complete all as specified & directed. Make : KSB / Kirloskar / CG

Supply & fixing reducer nipple of 150 mm x 125 mm dia one end welded with 150 mm dia flange pipe & other ends welded with 125 mm flanged pipe complete all as specified & directed.

Supply & fixing cast iron foot valve 150 mm dia complete with rubber packing joints one number including nut bolts & washer [eight numbers] complete as specified & directed.

Supply & fixing rubber / fibre board gasket of size 150 mm bore of flange pipe and fittings including nut bolts & washer [eight numbers] of suitable size complete as specified & directed.

Supply & fixing submersible cable heavy duty PVC insulated and sheathed 25 Sqmm 3 core submersible flat copper cable fully water proof 1100 Volt grade suitable for connection & jointing with centrifugal pump complete as specified & directed.

Supply & fixing cable joints suitable for submersible cable by means of jointing material with lugs and making good the leak proof joints complete as specified & directed.

Supply & fixing rubber / fibre board gasket of size 100 mm bore flanged pipe and fittings including nut bolts & washers complete as specified & directed.

Supply & fixing rubber / fibre board gasket of size 125 mm bore flanged pipe and fittings including nut bolts & washers complete as specified & directed.

Supply & fixing foundation bolt steel of size 5/8" x 150 mm long with hexagonal head with nut bolts & washers complete as specified & directed.

Material & Labour PCC 1:2:4 type B-1 using 20 mm crushed stone aggregate for foundation bed of centrifugal pump as required or directed at site including demolition of existing PCC by hammering or any other means and removal of rubbish from site complete as specified & directed.

Material & Labour for earthing complete with galvanised steel earth plate electrode of size 600mm x 600mm x 6mm thick burried directly in ground (Earth pit not less than 2.25 m deep below the normal ground level with top edge of earth plate not less than 1.5 m below normal ground level) connected to galvanised earth wire 4 mm dia as earth wire or earthing lead by means of bolts, nuts, check nuts and washers of GI or steel complete as shown in Electrical Plate No. 3 of SSR-2009 (Part-I) including charcoal dust, common salt, 20mm bore GI medium grade watering pipe, MS Sheet funnel with wire mesh, including 15mm dia GI pipe light grade for protection of GI earth wire including PCC pit 1:2:4 type B-1 using 20mm crushed stone aggregate with angle iron 40X40X5mm frame 60mm thick RCC cover with 8mm dia # TMT bars @ 100 mm centre to centre both ways i.e. horizontal and vertical complete all as directed by Engineer-in-charge and testing for required value complete. Note :- If earth resistance of earthing is not found satisfactory it will be redone by the contractor without any extra cost to Govt.

KRISHNA BAHADUR

M/S ATUL CONSTRUCTION