Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.9 LAccepted-AOC FARIDABAD FARIDABAD HARYANA | FARIDABAD | HARYANA | 121001 | L1 | Accepted-AOC Bidder found lowest | |
| 2 | L2₹51.2 L+₹13.3 L (35.1%)Rejected-AOC PLOT NO 301 SECTOR 17 FARIDABAD FARIDABAD HARYANA 121002 | FARIDABAD | HARYANA | 121002 | L2 | Rejected-AOC Bidder not found lowest |
Tender Value
₹38.0 L
EMD Value
₹76,000
Closing Date
3 Sept 2020, 6:00 pmClosed
EE-3
MCF Sec-19 Faridabad
P/L RMC M-20 360 kg/-cum at back side of telephone exchange in Sec-15 A Ward No.32 Faridabad
2020_HRY_141823_1
MCF/EE-III/2020/730
Open Tender
Civil Works
Works
180 days
Faridabad
Please refer Tender documents.
2 documents required · 2 mandatory
₹1,000
Commissioner, Municipal Corporation Faridabad
₹76,000
30 Sept 2020
28 Aug 2020
4 Sept 2020
28 Aug 2020
3 Sept 2020
28 Aug 2020
Amount
Providing and Laying in position separation membrane of 125 micron thick impermeable plastic sheet of make IPCL Shivalik or equivalent make in transparent white color over the surface of D.L.C. complete in all respect as per the entire satisfaction of the Engineer-in-charge
Extra for making rough surface of the concrete pavement for providing non slippery surface by mechanical cutter for safe plying of vehicles complete to the entire satisfaction of the Engineer-in-charge.
Providing and making saw cut transverse joint/construction joint as per approved drawing provided at a maximum distance of 4.5m including the cost of covering of dowel bars with thin plastic sheath for at least 60% of the length from one end. Initially 3 to 4mm wide cut shall be made after 1 to 2 days up to 1/3rd depth of slab temporarily with a jute rope. At the time of sealing of the joint temporary seal shall be taken out and 10 to 12mm wide grooves shall be mad up to depth of 22mm before sealing the joint 5m thick compressible de-bounding strips with paper back shall be inserted to the bottom of the groove. The groove shall be filled with polysulphide/silicon sealant. The sealant shall be applied slightly to a lower level than the slab with a tolerance of 2 + 1 mm complete in al respect as per approved drawing & entire satisfaction of the Engineer-in-Charge.
Providing and making saw cut longitudinal joints between two lanes including const. providing protective coating of bituminous paint for 75mm on each side of joint on Tie bars. Initially 3-4mm wide cut shall be made up 1/3 depth of slab and sealed temporarily with a jute rope. At the time of sealing of the Joint temporary seal shall be taken out and 6 to 8mm wide grooves shall be made up to depth of 17mm. Before sealing the joint 2mm thick compressible de-bounding strips with paperback shall be inserted to the bottom of the groove. The groove shall be filled with polysulphide/silicon sealant. The sealant shall be applied slightly to a lower level than the slab with a tolerance of 2 + 1 mm complete in all respect as per approved drawing & entire satisfaction of the Engineer-in-charge.
Bidder Name
Amount
RK GANDHI
M/s M.L.Enterprises
M/s M.L.Enterprises
M/s M.L.Enterprises
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .