REPAIR TO CEILING FAN EXHAUST FAN CABIN FAN AND STORAGE TYPE WATER HEATER GEYSERS UNDER GE P COMD HOSP WC CHANDIMANDIR

Amount

Taking down carefully of electric water heater (geysers) of 25 Ltr capacity of any make from the existing location by own arrangement of contractor for maintenance,painting, repair and replacement of defective parts of water heater and refixing its own location complete all as specified and directed. Note: Any defective parts of water heater shall be measured and paid separately.

All as per Srl item No. 1 above but 50 Ltr electric water heater.

Cleaning entire body of water heater 25 Ltr capacity with wire brush and removing old paint and making surface smooth for repainting with super enamelled paint over a one coat of red oxide steel primer as per existing colour code and removing unwanted paint from glass and rubber items and refixing its own location complete all as specified and directed.

All as per Srl item No. 3 above but 50 Ltr electric water heater.

Brazing the inner cell of water heater 25 ltrs capacity removing of leakage inlcuidng replacing of glass wool and testing the same complete all as specified and directed

All as per Srl item No.5 above but 50 Ltr electric water heater.

Maintenance of storage type electric water heater ( geysers) 25 Ltrs installed at various Wards/Living accn of Comd Hosp complex and carried out the followings checks :- (a) Inspection of Geysers and opening, dismantling, brushing and cleaning of storage water tank , removing the all sludge , descaling the storage tank and examining of any leakage of water and tightening of nuts and bolts. (b) Checking and connecting earth continuity wire to electric water heater. (c) Cheking and adjusting of pressure realease valve. (d) Checking and Maitenance of thermostate valve. (e) Visual examination of indication lamp/ fusible plug of geyser.

All as per Srl item No.7 above but 50 ltr capacity electric water heater.

Heating element of existing size and shape of capacity 1500 watt suitable for 25 Ltr electric water heater and making all Electrical connection as per site requirement including taking down existing complete all as specified and directed. MAKE: DASS PASS/RECOLD/ BAJAJ.

All as per Srl item No.9 above but of capacity 2000 Watt suitable for 50 ltr capacity electric water heater. MAKE: DASS PASS/RECOLD/ BAJAJ.

Thermostat 240 Volts AC temperature adjusted suitable 25/ 50 Ltr electric water heater and making electrical including taking down existing connection complete all as specified and directed. MAKE: DASS PASS/ RECOLD/ BAJAJ

CP connection with CP brass adaptor 350mm long and making connection to out let and inlet of electric water heater of 25/50 Ltr capacity including taking down existing complete all as specified and directed.

Indicator lamp assembly red and green in colour any shape and size suitable for 25/50 ltr electric water heater including taking down existing complete all as specified and directed.

Inner shell ( inner tank) ISI marked made out of copper sheet 22 guage suitable for 25 Ltr electric water heater in existing shape and size including taking down existing complete all as specified and directed.

All as per Srl item No.14 above but 50 Ltr Electric water heater.

Inner shell ( inner tank) ISI marked made out of stainless steel sheet 20 guage suitable for 25 Ltr electric water heater in existing shape and size including taking down existing complete all as specified and directed.

All as per Srl item No. 16 above but 50 Ltr Electric water heater.

Replacement of unsv outer body MS Sheet cover as per existing size complete with Top and bottom cover, inspection plate of 25 Ltr electric water heater duly painted with super enamelled paint two coat over a coat of red oxide steel primer complete all as specified and directed.

All as per Sl No 18 above but 50 Ltr electric water heater.

Glass wool superior quality in geysers any capacity i.e 25/50 Ltr electric water heater including taking out existing complete all as specified and directed.

Geyser base assembly (inner) cromium plated brass complete existing shape and size with inlet, out let , thermostate slot, drain plug and clamp or bolts to fixing heating element as existing shape suitable for 25 Ltr electric water heater including taking down existing complete all as specified and directed.

All as per srl item No.21 above but 50 Ltr electric water heater.

Copper flexible PVC insulated multistranded cable 3 core of size 4 Sqmm including making electrical connection to electric water heater and plug top and taking down existing complete all as specified and directed MAKE: PLAZA/ INDO ASIAN/HAVELLS

Plug top 15 Amp, 3 pin including making electrical connection with existing cable and taking down existing complete all as specified and directed MAKE: ANCHOR/ SSK/CRABTREE

Metal clad top plug 2 pole and earth 20 Amp including making connection and taking down existing complete all as specified and directed MAKE: HAVELL LE/LEGRAND/GEC

Metal clad socket 20 Amp 240 Volts includng making electrical connection and taking down existing complete all as specified and directed MAKE: HAVELL LE/LEGRAND/GEC

Fusible plug in 25/50 Ltr capacity electric water heater in existing location including testing and taking down existing complete all as specified and directed

PVC connection in inlet of geyser 25/50 Ltr capacity 15mm nominall dia, 450mm long including PVC heavy duty washers complete including taking down existing complete all as specified and directed. MAKE: PRAYAG / Polytuff.

Base assembly gasket in 25/50 ltr capacity electric water heater in any shape and size including taking down existing complete all as specified and directed.

Sheet metal enclosure single pole and neutral enlosure with two pin and earth plug top and socket 20 Amp rating with and including one No MCB 20-32 Amp single pole including taking down existing complete all as specified and directed MAKE : HAVELLS/LEGRAND/GEC

Safety valve suitable for 25 Ltrs/50 Ltrs capacity Geysers including taking down existing complete all as specified and directed Make : Havells/Legrand/GEC.

Taking down defective ceiling fans of sizes 1200/1400mm, exhust fan of any size, pedestal fan and cabin fan of after disconnecting electric connection for re-winding, overhauling, painting and including testing re-fixing on existing location complete all as specified and directed.

Strippping out of burnt winding and cleaning rotor slots and making surface smooth for re-winding of ceiling fan with super enmelled copper winding wire of appropriate guage as per existing guage with insulation material of ceiling fan any make and model with and including of greasing/ oiling, testing and including cleaning entire body with cloth and painting two coats with super enameled paint existing colour complete all as specified and directed.

All as per item Sl No- 33 above but for exhaust fan 300mm sweep.

All as per item Sl No- 33 above but for exhaust fan 380mm sweep.

All as per item Sl No- 33 above but for exhaust fan 400mm sweep.

All as per item Sl No- 33 above but for cabin fan 400mm sweep.

All as per item Sl No. 33 here in before but for pedestal fan of any sweep.

Spray painting of ceiling fan complete with one coat of synthetic enamelled paint (White) after taking down from the position , cleaning, washing, rubbing including filling cavities with filler etc , and testing complete all as specified and directed.

Condensor 2/2.5 mfd in ceiling fan of any make and model in situ complete all as specified and directed. MAKE: Usha/EPCOS/HAVELLS

Condensor 4.0 mfd in exhaust fan of any make and model in situ complete all as specified and directed MAKE: Usha/EPCOS/HAVELLS

Stepped type electronic fan regulator flush type on the existing pheolic laminated sheet as required including taking down existing complete all as specified and directed. Make : ANCHOR/ SSK/ ABB

Step type modular fan regulator 02 module 120 watts including taking down existing complete all as specified and directed. Make : ABB/SSK/ANCHOR

Bearing 6202 for suitable for ceiling fan/exhaust fan. Make: NBC/SKF

Bearing 6203 for suitable for ceiling fan/exhaust fan. Make: NBC/SKF

Bearing 6204 for suitable for ceiling fan/exhaust fan. Make: NBC/SKF

Gun metal bushes of ceiling fan/exhaust fan/cabin fan of any make and any model and any sweep including taking down existing complete all as specified and directed.

Fan blade for ceiling fan Aluminium of size 1200 mm sweep of any make and model aero dyanamically balanced including screwed for fixing and taking down existing complete all as specified and directed.MAKE: BAJAJ/USHA/CG/SKN.

Fan blade for ceiling fan Aluminium of size 1400mm sweep of any make and model aero dyanamically balanced including screwed for fixing and taking down existing complete all as specified and directed. MAKE: BAJAJ/USHA/ CG/SKN.

Louver shutter for Exhaust fan complete suitable for 380mm sweep including fixing with nuts, bolts and washer including taking down existing complete all as specified and directed. Make : Khaitan/Usha/CG.

Louver shutter for Exhaust fan complete suitable for 400 mm sweep including fixing with nuts, bolts and washer including taking down existing complete all as specified and directed. Make : Khaitan/Usha/CG.

Grill (spoke type) suitable for cabin fan 400mm sweep including nuts, bolts and washer including taking down existing complete all as specified and directed Make : Khaitan/Usha/CG.

MS down rod heavy duty 15mm nominal dia 18" long duly painted in matching colour including taking down existing complete all as specified and directed

MS down rod heavy duty 15mm nominal dia 24" long duly painted in matching colour including taking down existing complete all as specified and directed

MS down rod heavy duty 15mm nominal dia 36" long duly painted in matching colour including taking down existing complete all as specified and directed

Taking down old rusted frame of exhaust fan of 380/400mm sweep, supply and fix new frame of same capacity with MS flats of suitable size with nuts, bolts and washers as required at site complete all as specified and directed.

Modular metal flush terminal boxes with lumina plate and frame suitable for 3 module complete all as specified and directed. Make : SSK/ Legrand/Anchor

Switch modular type single pole one module, 16 Amps complete all as speciifed and directed.

Socket outlet mdoular type, multipurpose, 2/3 pin, single pole two module, 6/16 Amps complete all as speciifed and directed.

Taking down defective Air curtain fan motor of any size from site opening the same to ascertain the defect, rewinding the blower motor with the same existing size of winding wire and replacing the defective all parts including reassembling the air curtain and the fixing the same original position including testing to the entire the satisfaction of Engr In Charge complete all as specified and directed.

P.K.MALL ENTERIPRSES

KAPOOR ENGINEERS

CHADHA ENGINEERS

M/s Krishan Aggarwal