SPECIAL REPAIR TO ROOM NO 210 OF BUILDING NO 234 AT VSN NAGPUR

Amount

Taking down of chowkats with shutters exe 1.5 sqm and n.exc 4 sqm each complete all as specified and directed by Engr-in-Charge.

S&F Aluminium Framed doors with shutters with Hinges, glazed with 5 mm thick tinted glass with one side visibility using powder coated aluminium sections of approved make confirming to IS.(aluminium member shall not be less than 1.5mm thickness). (Glazing shall be measured and paid seperately)complete all as specified and directed by Engr-in-Charge.

M&L for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass, other parts made of mild steel heavy duty all as specified and directed by Engr-in-Charge including taking down old floor spring hydraulically complete all as specified and directed by Engr-in-Charge.

S&F 2 levers Brass Mortice lock for Aluminium Door, size 100 mm all as specified and directed.

S&F Extruded Aluminium bow handles of size150 mm complete all as specified and directed

S&F Aluminium, anodised, barrel tower bolts of extruded section and fixed, 150 mm size complete all as specified and directed

Dismantling of floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for Virified Ceramic tiles 10 mm thick (square/ rectangular)polished, area of each tiles not exceeding 0.36 sqm, over and including screed bed or bedding layer of mortar 15 mm thick for laying floor finishes CM (1:4) including in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match colour tiles all as specified and directed by Engr-in-Charge.

All as per Item No.9 herein above but as in skirting on vertical surfaces of wall over and including rendering 10mm thick in CM(1:4) all as specified and directed by Engr-in-Charge.

S&F 18/19 mm thick Prelaminated particle board, interior grade,prelaminated both sides with decorative choice lamination for door/side/middle/top/bottom/shelf of cuboard complete all as specified and directed by Engr-in-Charge.

S&F 2nd class Hard wood Plain fillets, square, rectangular or triangular in section, clean sawn n. exc 3 sq. cm , fixed with nails complete all as specified and directed.

S&F 2nd class Hard wood Plain fillets, square, rectangular or triangular in section, wrought Exc 3 & not Exc 6 sq. cm , fixed with nails. complete all as specified and directed.

S&F 75 mm size MS butt hinges medium weight cold rolled fixed/ welded to frame complete all as directed.

S&F continious(Piano) hinges,Aluminium ,bright finish or electrogalvanised,width of flap 30mm when open complete all as specified and directed.

S&F 125 mm size Aluminium handles, cast type, polished bright complete all as specified and directed.

S&F Catch Spring magnet type for Cup Board complete all as directed.

S&F Brass Knobs 35-40mm dia complete all as specified and directed.

M&L for Providing 12.5 mm tapered edge Gypboard (confirming to IS-2095-1982)Manufactured by Indian Gypsum false ceiling using GI Perimeter channel of size 20mm (one flenge) x27 mm web x 30mm (other flange x27mm (web)x30mm(other flange) x0.55mm thick along perimeter of ceiling fixed in wall using nylon sleeves and screws suspended from soffit with GI intermediate channel (of size of 15mmx45mmx15mm x 0.9mm thick)er @1220 mm center to center with ceiling angle (of size 25mmx10mmx0.55mm thick)fixed to soffit with GI cleat and steel expansion fasteners which alternate fixed to ceiling section of 0.55 mm thick having knurled web of 51.1 mm and two flanges of 26mm each with lips of 10.5mm)using connecting clip in direction perpendicular to intermediate channel @300mm center to center and gypboard fixed to ceiling section using 25 mm drywell screws @ 230mm centre complete all as per manufactures instructions and as directed including 2 coats of OBD over a coat of 1mm thick putty and taking down of old false celing complete all as specified and directed by Engr-in-charge.

S&F for second class hard-wood plain fillets of sectional area exc 13 & n exc 25 sqcm, square, rectangular or triangular in section, clean sawn, secured in brick wall/Rcc with suitable nails/screws/nut & bolt complete all as specified and directed.

M&LVeneered decorative plywood 12 mm thick, grade 1(with BWR resin) with decorative face veneers on one face; fixed with screws to timberframe work complete all as specified and directed.

M&L French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats complete all as specified and directed.

Preparing surfaces of wood and wood based materials,new or old, of any description and girth, not otherwise described and treated with two coats of creosote complete all as specified and as directed.

M&L for teak wood beading ,4 mm thick including matching colour polishing and fixed with Veneered decorative plywood decorative face, complete all as specified and directed.

M&L Preperation of old plastered wall surfaces with complete removal of existing treatment and applying texture paint (as per manufactures instruction)approved make and as per site requirement complete all as specified and directed by Engr-in-Charge.

Taking down DB/main switch of any size and making good disturbed surface of wall/floor complete all as specified.

Taking down carefully sub-main wiring of any description and making good to ther disturbed surfaces to match the existing all as specified and as directed by EIC.

M & L for sub main wiring (concealed) complete with two single core 6 Sqmm FR PVC insulated unsheathed stranded copper conductor cable drawn through in and including 20 mm dia rigid non-metallic PVC conduit heavy grade and conduit accessories including 6 Sqmm FR PVC insulated unsheated stranded copper earth cable connected to common earth dolly complete and including cutting chasing in walls for concealed wiring using machine cutting and making good the disturbed surface all as specified and directed.. Make of cable : Polycab, Finolex,Havells Note: 3 run of 6 sqmm & one run of PVC conduit shall be measured as single unit

M & L for sub main wiring (concealed) complete with two single core 4 Sqmm FR PVC insulated unsheathed stranded copper conductor cable drawn through in and including 20 mm dia rigid non-metallic PVC conduit heavy grade and conduit accessories including 4 Sqmm FR PVC insulated unsheated stranded copper earth cable connected to common earth dolly complete and including cutting chasing in walls for concealed wiring using machine cutting and making good the disturbed surface all as specified and directed. Make of cable : Polycab, Finolex,Havells Note: 3 run of 4 sqmm & one run of PVC conduit shall be measured as single unit

All as per serial item No 29 here-in-after but 20 mm dia rigid non-metallic PVC conduit heavy grade with two runs of 2.5 Sqmm and earth continiuty conductor of size 2.5 Sqmm all as specefied and directed.Make of cable : Polycab, Finolex,Havells Note : 3 run of 2.5 sqmm & one run of PVC conduit shall be measured as single unit

Taking down carefully any type point wiring (light, fans, socket etc) complete including battens and fittings such as switch, ceiling rose, light fittings, regulators, socket, etc. and making good disturbed surface of wall/floor, etc. complete all as specified and as directed.

M & L for point wiring (concealed) on walls and surface on ceiling complete with FR PVC insulated unsheathed 1100 Volts grade, conforming to IS-694, 1.5 sq mm (nominal area) multi stranded copper conductor cable drawn though in and including non metallic medium grade rigid PVC conduit heavy grade accessories, ISI marked, 19/20 mm dia including all accessories, concealed in walls by cutting chases using machine and making good the disturbed surface, with and including suitable modular boxes ,switch plates of suitable make and 1.5 sq mm copper earth continuity wire connected to earth dolly complete for the following complete all as specified and as directed. (a) One light point controlled by one switch

(b) One fan point controlled by one switch

(c) One switch socket outlet modular type 3 pin 6 amp on same board complete all as specified and directed.

All as per item No 32 above but 1.5 sq mm cable size and 1.5 sq mm earth continuity wire for one 3 pin socket outlet, 6 amps on Independent board complete all as specified and directed.

All as per item No 32 above but 2.5 sq mm cable size with 2.5 sq mm earth continuity wire for one 3 pin socket outlet, 16 Amps on independent board complete all as specified and directed.

S & F of 36 Watt LED Luminaire suitable for 600x600mm modular ceiling grid including frame of suitable size of above LED light with high efficiency PMMA diffuser gives soft glare free light with available lumen output from 3600 total lumen.The 36 W system shall be operating at 220-240v AC supply having internal driver .IP20,surge protection 2KV ,ambient temperature -20 to 45 degree C, frequency 50 to 60 Hz ,The system efficacy must be between80-100 lumen /watt ,with 70% lumen maintenance upto 50000 Br Hrs with uniform visually comfortable light output at 150 degree beam spread , CRI minimum 80. PF should be greater than 0.95 , THD < 10% . Indivisual LED's should not be visible for glare free output ,colour temperature 6500k all as directed. Make : Crompton Greeves/Bajaj/Phillips/ Wipro.

S & F 12 Watt LED focus light adjustable type suitable for fixing in wall or roof complete all as specified and directed.

S & F Switch modular type, single pole one way 6 Amps, 250 volts Ac suitable for modular switch boxes without indicator, all as specified and as directed. Make : Legrand Cat No. 675501

S & F socket modular type single pole one way 6/10/13 Amps multistandard 250 volts all as specified and as directed. Make : Legrand Cat No. 675554

M & L for ceiling rose, surface bakelite, 65 x 50 mm, two to three terminals all as specified and as directed.Make : Leader, Anchor

S & F socket modular type 16 Amps, 3 pin combine, 2 module,240 volts all as specified and as directed. Make : Legrand Cat No. 675555

S & F switch modular type 16 Amps,one way with indicator, 1 module,240 volts all as specified and as directed. Make : Legrand Cat No. 675513

S & F 0-4 step, one module, modular type electronic regulator for ceiling fan 1200 mm sweep, 240 volts, 100 Watts humfree single pole, all as specified and as directed. Make : Legrand Cat No. 675531

S & F power unit for upto 2 ton AC and geyser up to 3.5 KW modular type , 4 module,240 volts all as specified and as directed by EIC. Make : Legrand Cat No. 675558

S & F sheet metal enclosures for SPN DB's with metal double door for incorporating MCBs,IP-43 , 12 way with 200 amps rated busbar, 240 volts, as per IS-8623 all as specified and as directed. Make : Legrand Cat No 507612, ABB,Seimens

S & F MCB SPN, 32 Amps, breaking capacity 10 KA 'C' curve confirming to IS/IEC 60898-1 2002,integrated label holder, sliding bottom clamp , IP 20 protected terminal, sliding shutters, 240 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc complete all as specified and directed. Make : Legrand Cat No. 408617 ,ABB,Seimens

S & F MCB SP 10-32 Amps, breaking capacity 10 KA 'C' curve confirming to IS/IEC 60898-1 2002,integrated label holder, sliding bottom clamp , IP 20 protected terminal, sliding shutters, 240 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc complete all as specified and directed. Make : Legrand or equivalent in ABB,Seimens

M&L for MCB blanking plate.

Supply and install invertor based split AC of capacity 2 TON , electric driven single phase , 230 volts, 3 star rating including all accessories like brackets, rubber tubing , copper tubing , gas charging etc including testing and commissionin with as per norms of BEE and making good to the disturbed surface to match the existing surface complete all as directed Make Hitachi/LG/Voltas/carrier

Supply and install Voltage stablizer automatic operation single phase naturally air cooled indoor type & designed for input variation between 170 Volt to 250 Volt with output voltage stablized at 230 Volt with accuracy of (+/-)2.5 percent of capacity 5KVA complete all as specified and directed. Make:V guard ,Steady Volt,Microtek

Supply and fix PVC rigid conduit pipe 20/25 mm dia including all accessories and necessary saddles with fixing screwa, gutties etc complete all as specified and directed.

Supply and fix split AC stand of outdoor unit suitable for 1.5/2 ton including necessary fixing arrangement complete all as specified and directed.

M/s Prakash R. Verma

Harsh Construction Company