Loading
Loading…
Loading…
Tender Value
₹1.7 Cr
EMD Value
₹3.4 L
Closing Date
15 Jul 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Revenue
CIVIL
14 conditions · 3 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet. (Refer details in tender document).
Definition of Similar nature of Work:- ("Any Civil work other than EOT Track, Horticulture, Sanitation & P.Way work")
17 conditions · 3 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Quoted Rates shall be inclusive of all statutory taxes like GST, building cess, any allowance, license fee, royalty charges etc. as legally leviable by State, Central Government and/or any other local body/authority.
The tenderer(s) should deposit payment of EPF/ESI with the authority concerned for the preceding month of the wages month irrespective of number of workers and upload on the IR Shramik Kalyan Portal.
To assist in the examination, evaluation & comparison and prequalification of the Tender, the Railway may, at its discretion, ask any Bidder for a clarification of its Bid. Any clarification submitted by a Bidder that is not in response to a request by the Railway shall not be entertained or considered. The Railway request for clarification and the response of the bidder in this regard shall be in writing. However, if a Bidder does not provide clarification of its bid by the date and time communicated in the Railway request for clarification, the bid shall be evaluated as per the documents submitted along with the bid.
Tenderer should comply with the provision of EPF&ESI Scheme as modified from time to time and should registered themselves with concerned authority or submit registration issued by authority concerned within 30 days from the date of issue of (LOA), otherwise no payment will be released.
Instruction to bidder : Bidders while quoting the price must take the cognizance of the present minimum wages of labor and anticipated increase in minimum wages of labour during the period of the work. The successful Bidder will be bound to make payments of minimum wages to the labour as per rates applicable from time to time during execution of the work. The bidder shall quote rates for Schedule 03 in a manner that ensures compliance with minimum wage requirements (as per latest labour rates of CLC on the date of opening of bid) for NS- 22. Quoting rates below the applicable minimum wages will lead to summary rejection of the bid.
REPAIR AND MAINTENANCE OF ASSETS IN ADMN. BUILDING & WORKSHOP AREA, PLW/PATIALA ZONE WORK FOR THE YEAR 2026-27
T-12-2026-27
T-12-2026-27
Open
Works - General
12 Months
Patiala, Punjab
₹0
₹3.4 L
15 Jul 2026
23 Jun 2026
1 Jul 2026
22 items across 2 schedules · ₹37,30,031.07 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | NS-1 Repair to rolling shutters by oiling, greasing, rivetting of plates if found broken and re-fixing of channels etc. without any replacement of materials. If any replacement is made, that will be paid extra under relevant items. | Sqm | 200.00 | 343.47 | 68,694 |
| 2 | NS-2 Removing & Treatment of unwanted plants/trees from structural surfaces at all heights upto 10 mtrs from NGL by removing plants, opening the structural surface to remove plantroots & thn injecting Roundup treatment and repairing the structural surface to its original appeal with brickwork, concrete & plastering etc. as a complete job with necessary scaffolding | Each | 300.00 | 456.78 | 1,37,034 |
| 3 | NS-3 Providing and fixing of Hindware, Cera or similar make (Wall mount instalation type) HAND SHOWER (Health Faucet) (ABS Body) with 1.2 mtr long Brass Flexible tube and wall hook includes all lead, lifting any height, loading, unloading, all taxes, charges, all L&M, T&P as a complete job. Nothing Extra will be paid whatsoever the case may be. | Each | 20.00 | 1,057.29 | 21,145.8 |
| 4 | NS-4 Supply of national flag of size 20Ft x30Ft in knitted polyester, with reinforced super-strong nylon webbing on all 3sides. There is no warranty on Indian National flag | Each | 4.00 | 27,709.88 | 1,10,839.52 |
| 5 | NS-5 Replacing of top layer 150 mm thick filter media after removing existing coarse sand & silt from rain harvesting pit, (Average thickness 200mm) deposing out side pit in stack than shifting the same at nominated place up to lead 50mtr, Cleaning jungle, wild grouth etc. 3mtr arround harvesting pit and refilling the top layer with 150mm thick fresh coarse sand dressing the surface in level to the satisfaction of site engineer including all labour and material lead lift all taxes as a complete job. | Each Job | 12.00 | 4,729.55 | 56,754.6 |
| 6 | NS-6 Supplying of Ordinary Portland Cement (OPC/PPC) 43-grade inclusive of all Taxes and incidential charges etc. as a complete job to the satisfaction of site engineer.. | Tonne | 12.00 | 6,842.28 | 82,107.36 |
| 7 | NS-7 Supply of national flag of size 4Ft x 6Ft in knitted khadi, with reinforced super-strong nylon webbing on all 3sides. There is no warranty on Indian National flag | Each | 6.00 | 2,618.97 | 15,713.82 |
| 8 | NS-8 Supply of Float glass panes of nominal thickness 5 mm (weight not less than 12.50 kg/sqm) | Sqm | 100.00 | 517.41 | 51,741 |
| 9 | NS-9 Supply of G.I. pipes 15 mm dia inclusive of all Taxes and incidential charges etc. as a complete job to the satisfaction of site engineer. | Metre | 60.00 | 95.42 | 5,725.2 |
| 10 | NS-10 Supply of G.I. pipes 20 mm dia inclusive of all Taxes and incidential charges etc. as a complete job to the satisfaction of site engineer. | Metre | 60.00 | 128.72 | 7,723.2 |
| 11 | NS-11 "Testing/Calibration, overhauling, repair and painting of water Meters bulk type of different sizes in diametre. 25 mm to 50mm dia" | Each | 25.00 | 4,138.33 | 1,03,458.25 |
| 12 | NS-12 "Testing/Calibration, overhauling, repair and painting of water Meters bulk type of different sizes in diametre. 150 to 200 mm dia" | Each | 3.00 | 6,083.44 | 18,250.32 |
| 13 | NS-13 Hiring of JCB/Hitachi for levelling and dressing ground/dismantling structures,Removal of jungle, clearing of earth, lowering high cess etc., along side the track between up and down lines obstructing drainages of rain water, clearing of bushes obstructing visibility at curves and Level Crossings with all lead and lift etc. complete and as directed by the Engineer-in-charge .All labour, tools and plants consumables s t o r e s including supply of JCB/Hitachi with crew to be provided by the contractor at his own cost. The contractor shall arrange road permit for vehicle for all the States of operation, as per instructions of engineer in-charge and vehicle shall not be more than three years old. Payment shall be made for actual working hours at site. | Hour | 100.00 | 1,082.14 | 1,08,214 |
| 14 | NS-14 Providing and fixing of PVC Handle for Low Level cistern of make Tip Top or Equivalent, includes all lead, lifting any height, loading, unloading, all taxes, charges, all L&M, T&P as a complete job. Nothing Extra will be paid whatsoever the case may be. | Each | 25.00 | 54.76 | 1,369 |
| 15 | NS-15 Providing and fixing of PVC Syphon for Low Level cistern of make Tip Top or Equivelent, includes all lead, lifting any height, loading, unloading, all taxes, charges, all L&M, T&P as a complete job. Nothing Extra will be paid whatsoever the case may be. | Each | 25.00 | 153.16 | 3,829 |
| 16 | NS-16 Providing and fixing of PVC Float Valve 15 mm dia for Low Level cistern of make Tip Top or Equivelent, includes all lead, lifting any height, loading, unloading, all taxes, charges, all L&M, T&P as a complete job. Nothing Extra will be paid whatsoever the case may be. | Each | 25.00 | 85.1 | 2,127.5 |
| 17 | NS-17 Providing of PTMT Jet spray with 1.0metre t u b e make prayag or equivelent in WC Pan (Eurpion Type) including all fitting , all taxes, transportation, including all labour & material as a complete job. | Each | 30.00 | 250.6 | 7,518 |
| 18 | NS-18 supplying of Hydraulic door closer tubular type Aluminium section body inclusive of all Taxes and incidential charges etc. as a complete job to the satisfaction of site engineer. | Each | 50.00 | 759.92 | 37,996 |
| 19 | NS-19 Non-schedule Rate for Providing and fixing PVC wall panelling / wall cladding on the wall to the satisfaction of the Engineer-in-Charge. This includes all necessary fittings and fixtures, labour and materials, tools and plants (T&P) all types of taxes etc. as a complete job. | Sqm | 50.00 | 624.3 | 31,215 |
| 20 | NS-20 Providing and Laying of high density fibre (HDF) laminate wooden flooring of tile size 1220 x 194 x 8 mm of make Cross bond, Elegant, Green panel, Action tesa etc. having floating installation with interlocking click system over form cushion 2 mm with all fitting & fixtures. This includes all labour, material, Freight, Taxes etc as a complete job to the satisfaction of engineer in-charge. Nothing extra shall be paid there off. | Sqm | 100.00 | 1,825 | 1,82,500 |
| 21 | NS-21 Supply of floor mounted, gravity type, single piece European chinaware water closet with integrated cistern, complete with matching seat cover, dual flush mechanism, and all necessary fittings and accessories, of approved make such as CERA, Hind ware, Parry ware, or equivalent, conforming to relevant IS standards, ensuring durability, smooth operation, efficient water usage, and ease of maintenance, and shall be executed as a complete job to the satisfaction of the Engineer-in-Charge. Nothing extra shall be paid there off. | Each | 5.00 | 10,637.5 | 53,187.5 |
| Schedule total | ₹11,07,143.07 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
ACS-1to11merged_merged_compressed-compressed1.pdf
ATTACHMENT
CECIRCULAR630merged.pdf
ATTACHMENT
Spdata.pdf
ATTACHMENT
Tdocs.pdf
ATTACHMENT
AnnxA_1.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .