8896 MAINTENANCE REPAIR REPLACEMENT OF EXTERNAL LT NETWORK SYSTEM SWITCHGEAR AND ALLIED WORK IN THE AREA OF AICTS OBGM NGBM AND WR STN AND OTHER CONNECTED AREA UNDER AGE EM I SOUTH PUNE

M&L for Repairs to LT panel boards complete including with necessary welding works to doors, replacement of unserviceable hinges & aldrop bolts etc. complete all as specified and directed by Engr-in-charge.

M&L for prepration of old painted surface of LT panel board /Bus Bar boxes , etc and applying two coat of synthetic enamel paint by spray gun for panels complete all as specified and as directed by Engineer-in-Charge

M&L for locating fault/testing of LT UG Cable of any size with the help of cable fault locating machine including taking shut down and opening the cable from both side of Bus Bar Panel/LT Panel/MCCB/ACB/Transformer etc and re-terminating the same cable in the same Bus Bar Panel/LT Panel/MCCB/ACB etc according to existing system after pinpointing of faut location necessary excavation and taking out of faulty cable for repair/ replacement of joint, relaying of cable, cable cover refilling of soil and removal of surplus soil etc at site all as specified and directed. Note:- (1) The joint shall be measured and paid separately under relevant item. The qty of item will be executed at different times during currency of contract as directed by Engr-in-Charge. Hence, contractor shall quote his rate accordingly for arranging fault locating machine and executing the items accordingly. (2) Fault should be detected and rectified within 08 hrs from intimation (with any means) to contractor. If contractor fails to detect & rectify the fault within 08 Hrs, a penalty after 08 Hrs should be made to contractor at the rate of Rs 500 per hour. (3) The quoted rate is included for the fault locating machine. Note : Takingout / Relaying of old cable meaured and paid saparately.

M&L for straight through joint kit heat shrinkable suitable for the LT under ground cable 1100 volt grade 25 to 50 SQMM armoured with aluminium conductor including necessary lugs and earth work etc all as specified and as directed by Engineer-in-Charge. Note : Takingout / Relaying of old cable meaured and paid saparately.

All as per item No - 4 above but size 70 to 120 SQMM

All as per item No - 4 above but size 150 to185 sqmm

All as per item No - 4 above but size 240 to 300 SQMM

M&l for disconnecting burnt LT cable from MCCB / Main switch / Transformer etc and cleaning the bus bar and removing carbon and rusted nut bolts etc complete and re-connecting the LT cable after replacement of Gland Plate of suitable size 3 mm thickness , aluminium lugs, glands and insulating exposed inner core of the cable with HT insulation tape /sleave etc and dressing of cable in trench, wall for the LT cable of following size complete all as directed by Engineer-in-Charge:- Note :- Lugs ,Gland plate , Sleaves , HT tape , MS Shaddle as per required size etc deemed to be included in quoated rate. LT under ground cable 10 to 25 sqmm 4 core

All as per item No - 8 but Lt underground cable 50 to 95 Sqmm

All as per item No - 8 but Lt underground cable 120 to 240 Sqmm