SPECIAL REPAIRS TO REPLACEMENT OF LT OH LINES WITH UG CABLES AND E/M INSTLN AT SW ACCN AT AWC UNDER GE(AWC)MHOW.

Amount

Taking down/Dismantling of ASCR conductor by disconnecting from existing steel tubilar pole complete all as specified and as directed.

M&L for dismantling insultors any type/size complete all as specified and as directed.

Dismantling cross arms of MS channel or angle section complete all as specified and as directed.

Dismantling of stay assembly complete all as specified and as directed.

Dismantling of steel pole and relocating where directed. Note: Excavation, PCC and errection at new location shall be measured and paid seperately under relevent item of schedule.

Supplying, laying ,fixing,jointing and testing of LT under ground XLPE insulated , galvanised steel strip or wire armoured heavy duty electric cable with aluminium conductor , 1100 volt grade, cross sectional area 120 sqmm x3.5 core IS 7098 marked with electric connection, lugs/in GI pipes incl connection to LT panels with gland all as specified and as directed. Note: Excavation,earth work,sand cushioning, PCC cover and GI pipe shall be measured and paid seperately. Make: RR kabel/RPG(Asian)/Finolex/Havells/KEI

Description same as per Sl item No 06.00 above but of size 95 sqmm x 3.5 core

Description same as per Sl item No 06.00 above but of size 70 sqmm x 3.5 core

Description same as per Sl item No 06.00 above but of size 50 sqmm x 3.5 core

Description same as per Sl item No 06.00 above but of size 35 sqmm x 3.5 core

Description same as per Sl item No 06.00 above but of size 16 sqmm x 4.0 core

Excavation in trenches, not exc 1.5 m wide and not exc 1.5 m in depth; for laying of cables, pipes etc. and getting out all excavated material in any type of soil complete all as specified and directed.

Returning, filling in and including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and as directed.

Removing of excavated surplus soil to a distance not exc 50 m and depositing where directed at a level not exc. 1.5 m above the starting point complete all as specified and directed.

M&L of locally available river sand in trenches below and above / around UG cable for cable protection, in duct under & above the cables including punning around cable complete all as specified and directed. Note - Punned thickness shall only be measured and paid.

Supply and laying unreinforced PCC Cable protection cover, class LV, type-1 flat with size 250 x 150 x 40 mm laid flat width wise complete all as specified and directed.

Drilling (Horizontally) existing road (maximum 10 mtr wide) suitable for passing GI tubing complete all as specified and directed. Note: GI tubing shall be measured and paid separately.

Supply and laying GI pipe light grade 40 mm in trenches, under floors,roads,along poles for protection of cable with all necessary fittings and sealing ends complete all as specified and as directed. Make: Jindal, Prakash surya, TATA

Description same as per Sl item No 18.00 above but size 50 mm complete all as specified and as directed.

Description same as per Sl item No 18.00 above but size 80 mm complete all as specified and as directed.

M&L for errection of dismanled steel tubilar pole at location as directed all as specified and directed. Note : PCC , coping of pole shall be measured and paid seperately

M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregate in foundation , filling and mass concerete complete all as specified and as directed.

M&L for PCC 1:3:6 type C2 using 20 mm graded stone aggregate for coping of pole , pedestrial for LT panel complete including necessary formwork required, all as specified and as directed.

M&L for FRP junction box three terminal and neutral with one MCB SP 20 A for control of security light fixed on steel tubular pole with suitable bracket nut bolt and washers, connecting three phase UG cable on terminals , providing PVC pipe 15 mm size heavy duty froim Junction box to strret light incl 02 run of single core multi stranded copper conductor from FRP box to connector of security light, complete all as specified and as directed. Make - Hensel / Schneider / GE

M&L for medium weight GI pie 40 mm bore size bend into shape 1.2 mtr length( min) fixed to steel tubular pole by means of MS clamps, nut bolt and washers, complete all as specified and as directed.

M&L for painting of stell tubular pole 9 meter length with two coat of synthetic enamel paint afer surface preparation complete all as specified and as directed.

Replacement of Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm thick, buried directly in ground vertically to a depth not less than 2.25 meters deep below ground level with top edge of the plate not less than 1.5 Mtrs below normal ground level connect to galvanised earth strip of size 32x6mm by means of bolts, nuts, check nuts and washers of galvanized iron or steel up to 7.5 meter length including connected to earth plate including necessary excavation & earthwork, PCC (1:3:6) type C-1 earth chamber, 40 mm thick RCC cover 1:2:4 mix with 6mm dia nominal reinforcement @ 150 mm c/c both ways etc complete all as shown in electrical plate No 3, connected to earthing test point complete including testing on completion all as specified.

AGARWAL BUILDERS