Sand

Angle iron post made of structure steel angle section grade E 250 Type A of dimensions 65 x65x6mm 4300mm length

Angle iron post made of structure steel angle section grade E-250 type A of dimensions 65 x65x6mm 3600mm long

Angle iron post made of structure steel angle section grade E-250 type A of dimensions 65 x65x6mm 2700mm long

Galvanised steel barbed wire A-5 designation for fencing conforming to IS 278 -1978 as per tech spec att

Pre prefabricated Steel door confirming to IS 1038 1938 of size 900mm x1800mm as per tecch spec att

Steel Roofing Trough of size 1630 mm x 613 mm x 180 mm as per tech spec att

Steel Roofing Trough of size 1700 x 613 x 180mm as per tech spec att

Hexagonal nuts bolts and washers 12mm dia 40mm long

ISMB 150 RSJ 150 x 75mm 6.1m long conforming to IS 808-1973 as per tech spec att

ISMB 150 RSJ 150 x 75mm 5.70m long conforming to IS 808-1973 as per tech spec att

ISMB 150 RSJ 150 x 75mm 3.5 m long conforming to IS 808-1973 as per tech spec att

HDPE Sand Bag of size 75 x 40 cm Sand colour and each bag having weight not less than 60 gms

Aggregate 20mm as per tech spec att

Hesco basket of size 1.22mm x 0.61mm x 0.61mm as per tech spec att

Natural sand confriming to IS 383 - 1997 as per tech spec att

PBS roll Self finished tarfelt hessian base for water proofing as per tech spec att

HDPE Sheet as per tech spec att

Load bearing concrete Solid Blocks of size 400mm x 200 mm x 200 mm confirming to IS 383 1970

XLPE insulated PVC sheathed Heavy duty armoured multi core cable 25 sqmm 3.5 core Aluminium conductor

TMT Bar 10mm as per tech spec att

TMT Bar 12 mm dia of approved make as per tech spec

TMT Bar 16mm dia of approved make as per tech spec

Interlocking tiles of size 12 inch x9 inch as per tech spec

Manufacturing sand confriming to IS 383 - 1997

Bullet Resistant glass 1 ft x1 ft size 65mm thick with iron frame as per tech spec att

PCC hollow blocks 400 mm x 200 mm x 200 mm confirming to IS 2572-2005 Bid Details 2/27

Angle iron post made of structure steel angle section

Type A designation Fe-410W of IS 2062 : 2006

of dimensions 65 x65x6mm

4300mm length including detachable 'Y' arm. The length of one arm 800mm sectional weight 5.8 Kg per mtr conforming to HQ 15 Corps drawing No 3534/LC/Picket/001 sheet - 1/1 dt 05 Sep 2018 and all other Technical Specification as per Appendix 'A'. 04 Nos 12mm dia holes will be provided on angle post and 'Y' arm each as shown in drg att for fixing of 'Y' arm nut bolt. All angle iron post will be painted with one coat of red oxide zinc chromate primer on complete length and two coats of green synthetic enamel spray paint except bottom length 600mm below ground level. Finished angle iron post shall be free from burbs and sharp edge.Angle iron post made of structure steel angle section

Type A designation Fe-410W of IS 2062 : 2006

of dimensions 65 x65x6mm

4300mm length including detachable 'Y' arm. The length of one arm 800mm sectional weight 5.8 Kg per mtr conforming to HQ 15 Corps drawing No 3534/LC/Picket/001 sheet - 1/1 dt 05 Sep 2018 and all other Technical Specification as per Appendix 'A'. 04 Nos 12mm dia holes will be provided on angle post and 'Y' arm each as shown in drg att for fixing of 'Y' arm nut bolt. All angle iron post will be painted with one coat of red oxide zinc chromate primer on complete length and two coats of green synthetic enamel spray paint except bottom length 600mm below ground level. Finished angle iron post shall be free from burbs and sharp edge.

Angle iron post made of structure steel angle section

Type A designation Fe-410W of IS 2062 : 2006

of dimensions 65 x65x6mm

4300mm length including detachable 'Y' arm. The length of one arm 800mm sectional weight 5.8 Kg per mtr conforming to HQ 15 Corps drawing No 3534/LC/Picket/001 sheet - 1/1 dt 05 Sep 2018 and all other Technical Specification as per Appendix 'A'. 04 Nos 12mm dia holes will be provided on angle post and 'Y' arm each as shown in drg att for fixing of 'Y' arm nut bolt. All angle iron post will be painted with one coat of red oxide zinc chromate primer on complete length and two coats of green synthetic enamel spray paint except bottom length 600mm below ground level. Finished angle iron post shall be free from burbs and sharp edge.

Hesco basket of size 1.22mm (Length) x 0.61mm (width) x 0.61mm (Height) of product code MIL2 2424 or equivalent with double twisted hexagonal shaped steel woven wire mesh and mechanically selvedged of mild steel galvanised iron wire dia 3 mm thick and wire gape should not be more than 50mm x50mm with GeO fabric with weight more than 300gm per sqm with (Zinc +10%Aluminium) Alloy + PVC olive green colour coating complete all as specifed by manufacturers . Bid Details 3/27