REP AND REPL OF ROOF SHEET, FLOORING PLASTERING, JOINERY, SANITARY FITTING, FALSE CEILING, WALL PANELLING AND ALLIED WORKS AT PEDONG, ALGARAH, AP ALGARAH, DLAPCHAND AND TEESTA TCP UNDER GE 867 EWS

Amount

Demolation of existing block masonry brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but ashlar facings, dressed stonework and precastconcrete articles and precast concrete block walling complete all as specified and directed.

M & L precast cement concrete type C-1 , (1:3:6) (using 20mm graded stone aggt) block masonry with solid blocks exc 10cm in width and setting in CM (1:6) complete all as specified and directed.

Taking down cement or cement lime plaster of any description from stone/ PCC block /brick walls incl raking out joints hacking for key, scrubing down with water etc. complete all as specified and directed.

M&L 10 mm thick rendering on fair faces of brick work or concrete surfaces in CM (1:6) complete all as specified and directed.

Preparing newly plastered surfaces of wall and applying two coat of oil bound distemper over chalk whitining primer over 3mm thick layer of putty all as specified and as directed.

M & L 10mm thick rendering on fair faces of brick work concrete surface in CM (1:4) with water proofing compound. [Note : WPC will be measured and paid separately.]

Supply only integral water proofing compound.

M&L three coats of white wash on newly plastered surfaces including preparation of surfaces complete all as specified and directed.

Taking up or down 15mm bore steel tubing and connections incl cleaning for re fixing or removal to store all as specified

S&F 15mm bore tubes medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

S & F in repair bib taps 15mm bore cast copper alloy chromonium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed.

S & F in repairs pillar taps, cast copper alloy, chrominium plated with capstan heads, chromium plated, screwed down high pressure with or without lettered "Hot or Cold" with long screwed shanks and fly nuts screwed for iron pipe and fixed.

S & F in repair 15mm stop cock/Angle valve cast copper alloy chromonium plated screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed.

S & F in repair PVC connection pipe 15mm size with PTMT nuts of 600mm length.

S & F in repair vitreous china squatting pan, Orissa pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including provision of concrete bedding.

S & F in repair vitreous china, wash down water closet pedestal pattern, white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified.

Dismantling floor hearth or wall tiling including cement morter bedding (but not backing) removing serviceable tiles to store & rubbish of the premises.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM (1:6) complete all as specified and directed.

M & L glazed ceramic coloured tiles (300 x 200mm) x 7mm thick on vertical surfaces such as skirting , dados & risers to steps set & Jointed in neat cement slurry & pointed in colored cement to match over and including 10 mm thick rendering in CM (1:4) complete all as specified and directed.

M&L for non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces of tile over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L for non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, on vertical surfaces such as dado/skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces of tile over and including 10 mm thick backing coat in cement mortar (1:4) complete all as specified and directed.

M&L non skid ceramic coloured tiles 7 to 8 mm thick (Square/Rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc, set and jointed in neat cement slurry and pointed with coloured cement to match over and incl 15mm thick screed bed in cm (1:6) in flooring complete all as specified and directed.

M&L Granite (of any type) work 18-20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in including and over 20mm thick screed bed CM (1:6) and pointing in white cement (1:2) using marble dust with admisture of pigment to match with shade of granite complete all as specified and directed.

S & F in repair PVC valveless syphonic action type flushing cistern,10 ltr capacity, low level, white with inlet, ball valve float and handle including brackets and connection to pipes complete all as specified and directed.

S & F in repair Vitreous china WHB 550 x 400 mm white flat back including brackets and cutting for and pinning in ends of brackets or erecting stand complete all as specified.

S&F in repair Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe

M&L for 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

M&L for 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

M&L 75mm PVC (SWR) bends complete all as specified and directed.

M&L 110mm PVC (SWR) bends complete all as specified and directed.

S&F in repair cromium plated health faucet, fancy type, Abs SS braided hose 1.25m with IV hook, fixed complete all as specified and directed.

Taking down chowkats frames but with shutters (with out taking off shutter from the frames) exc 1.5 sqm but not exc 4.00 sqm each complete all as specified and directed.

Taking down chowkats frames but with shutters (with out taking off shutter from the frames) n.exc 1.5 sqm each complete all as specified and directed.

Taking down shutters of any description area exc 1 sqm but not exc 2 sqm each complete all as specified.

Taking down shutters of any description area n.exc 1 sqm of each complete all as specified.

S & F 2nd class hard wood plain, solid straight chowkats and frames, wrought framed rebated on the solid rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified.

S & F Pressed steel frame of size 105 x 60mm for door with one or more rebates including necessary fixing, lugs, hinges,lock strike plate, etc complete all as specified, supplied and fixed.

S&F 30 mm thick flush shutters solid core construction with block board core and ply wood face panel commercial type on both sides complete all as specified and directed.

S&F anodised aluminium frame for door windows ventilators with one or more revets including joining clea for fixing etc complete all as specified.

S&F anodised aluminium door shutters aluminium section weighing 0.55 kg/mtr including necessary joining cleats glazing clips rubber neoprene packing handles 2 nos in each doors hinges anodised aluminium snap beading screws etc. complete all as specified.

M & L preparing surfaces of wood and wood based materials, treating ends of post, back of chowkats, ets, area tarred exc 0.10 Sqm but n exc 0.50 Sqm each not other wise described and treated with tar or coal tar black complete all as specified and directed.

S & F mild steel work as in hold fast & similars articles confirming to Fe 290 Gde-E-165 all as specified.

Solid PVC door frame of size 50mm x 47 mm, made out of 5mm plain colour PVC sheet, reinforced with MS square tube supplying and fixing in openings complete all as specified and directed.

S & F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail , lock rail and bottom rail on either side and as gap insert for top rail and bottom rail , panelling of plain colour PVC sheet to be fitted in the MS framewelded/ sealed to the stiles and rails with suitable PVC sheet beading , and jointed together with solvent cement in the frame at site as per specification.

S & F 2nd class hard wood Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed.

S & F 30 mm thick 2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.

S&F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

S&F in repair Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

S & F steel window with side hung shutter, including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded.

M&L for Mild steel work as in guard bards for window frames confirming to Fe-290 Gde E-165 complete all as specified and directed.

S & F 100 mm size butt hinges medium weight cold rolled mild steel and fixed to chowkats all as specified

S & F in repair 100 mm size butt hinges medium weight cold rolled mild steel and fixed to chowkats all as specified

S & F 150mm size aluminium handle cast type anodised.

S & F in repair 150mm size aluminium handle cast type anodised.

S & F 250 mm long aluminium alloy, anodised sliding door bolt with hasp and staple (bolt type ) and fixing clip of sheet cost or extruded section or cost aluminium alloy & fixed complete all as specified and directed.

S & F in repair 250 mm long aluminium alloy, anodised sliding door bolt with hasp and staple (bolt type ) and fixing clip of sheet cost or extruded section or cost aluminium alloy & fixed complete all as specified and directed.

S & F 150mm long aluminium anodised barrel tower bolts of extruded sections and fixed complete all as specified and directed.

Hacking out old brocken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S & F 3.0 mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc 0.50 Sqm in each pane complete all as specified and directed.

S&F 3mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed.

S&F 4mm thick Figured glass, pin head type and glazing with oil putty in squares exc 0.5 sq. m in each pane complete all as specified and directed.

S&F in repairs Drapery curtain rod dia 18-19 mm dia powder coated in colour with fixing brackets, stops rollers etc complete all as specified and directed.

M&L preparation of newly wooden surfaces of any description exc 10cm in width or girth and applying two coats of synthetic enamel paint of first quality over one coat of pink primer complete all as specified and directed.

Preparing old surfaces of wall and applying one coat of white wash complete all as specified and as directed.

Preparing old surfaces of wall and applying one coat of colour wash complete all as specified and as directed.

Preparing old surfaces of wall and applying one coat of white wash on ceilings complete all as specified and as directed.

Preparing of old painted wooden surfaces of any description and in any position over 10 cm in width or girth (not otherwise specifically described) and applying one coat of synthetic enamel paint All as specified and as directed.

All as per item Ser No 68 above but on steel surface (other than roof).

Preparation of old painted steel and iron surfaces of any description and in any position over 10 cm width or girth as in roof not other wise specially described and applying one coat of Ist grade enamel paint (Corrugal) of any first approved all as specified and as directed.

Preparing old surfaces of wall and applying one coat of oil bound distemper all as specified and as directed.

Preparation of surfaces of wood and wood based materials to old surfaces of any description and girth (not otherwise described) and treated with one coat of creosote oil complete all as specified and directed.

Preparing old wooden surfaces of any description over 10 cm in width or girth and applying one coat of varnish all as specified and as directed.

M&L for complete removal of existing treatement on walls and applying two coats of cement base paint over a coat or alkali resistan primer complete all as specified and as directed.

M&L for preparing of old plastered or unplastered and applying one coat of cement base paint on external wall surfaces all as specified and as directed.

Obliterating old writing of any description n.exc 0.10 sqm with paint to match existing work as directed by Engr-in-Charge.

Obliterating old writing of any description exc 0.10 sqm but n.exc 0.50 sqm with paint to match existing work as directed by Engr-in-Charge.

M&L for preparing old plastered or unplastered walls and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. as specified and as directed.

Dismantling of wall & celling boards (fiber pulp insulation etc) or insulation boards/ slabs / blankets any thickness, including cover fillets complete all as specified and directed by EIC.

S&F Solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and directed by Engr In Charge.

Dismantling of plain or corrugated sheeting any gauge, thickness, including nainital or similar pattern roof coverings complete all as specified and directed.

S & F 0.63mm thick galvanished corrugated mild steel sheeting with two corrugation side lap fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275 complete all as specified and directed.

S&F Pre- painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws complete all as specified and as directed.

S&F Pre- painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering, fixed with seif tapping screws complete all as specified and as directed.

S & F Plain, galvanized, mild steel sheeting 0.63 mm thick is ridges, hips valley gutters drips and straight flashing (length & girth as fixed) with grade of zinc coating 275 complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specfied and directed.

S&F Roof trusses (framed) trssed, purlin, crane gantries, rail and fastenings and heavey bracket framing (Beam, tee, angle, channels of flat sections) including distance pieces, cleates etc confirming to Fe 410W(Gde E-250 quality A) all as specified and as directed

S & F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed

S&F 1mm thick Mild steel sheet/PVC eaves gutters, 125mm dia, galvanised class 3, half round with rounded edges complete all as specified and directed.

S&F 4mm thick ply wood 3 nos of ply grade BWR, type BB fixed with nails to timber frame complete all as specified and directed.

S&F 6mm thick ply wood 5 nos of ply grade BWR, type BB fixed with nails to timber frame complete all as specified and directed.

S&F 605 X605 mm GI frame work for for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to sorrounding wall using nylon sleeves and screws at 450 mm centre to centre /intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from suffit at approx 900 mm centre to centre with GI cleats and steel expansion fastner with and including ceiling section (not exc 1.2 m length)of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10 .5 mm fixed to the intermediate channel with connecting clieats across the intermediate channel at 457 mm centre to centre complete all as specified and directed.

S&F PVC 10 mm thick insulation panels with EPS stuck to 1mm plain PVC sheet suitably placed in false ceiling/wall grid made of aluminium / G.I / M.S as per specification and drawing.

S&F 2nd class hard wood plain fillets sectional area exc 6 but n.exc 13 sqcm square , rectangular or triangular in section, clean sawn, secured with nails or brads complete all as specified and directed.

M&L preparation of newly wooden surfaces of any description n.exc 10cm in width or girth and applying two coats of synthetic enamel paint of first quality over one coat of pink primer complete all as specified and directed.

Dismantling of timber in scantling 40 sqcm and over in section in any position in unframed work.

M & L clean sawn second class hard wood in scantling complete all as specified and directed.

Ditto all as per above item No 16 here in before but except timber complete all as specified and directed.

Demolition of cement concrete(Unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete all as specified and directed.

M&L for PCC (1:4:8) type D-2 75 mm thick as in sub base to floors complete all as specified and directed.

M&L 40 mm thick Plain cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) as in floors finished even and smooth using extra cement all as specified.

M&L 38mm wide glass dividing strips 3mm thick as in floors complete all as specified and directed.

M & L 75mm thick PCC type C-2 (40mm graded stone aggt) in plinth protection , path/steps etc complete all as specified and directed.

Note: In case doubling/duplicancy of BOQ items , the lowest quoted rate shall be applicable for payment.

DEDUCTED AMOUNT OF SCHEDULE OF CREDIT

SANJAY SAW MILL

MANOJ JINDAL

ANTHONY PRADHAN

SUNIL PRADHAN

RAJU TAMANG

MS BRAHMA CONSTRUCTION

DEEP CHANDRA JOSHI