Civil Works for 2nd 132 kV bus-bar at 132 kV S/Stn. Gidderbaha.

Earth work in excavation in foundations, trenches etc. In all kinds of soil where pick jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches , stacking the excavated soil clear from the edge of excavation and subsequent filling around masonary in 15 cm layers with compaction including diposal of all surplus soil as directed within a lead of 30 metres.

Dismantling brick work tile, masonry or tile lining : In cement

Dismantling concrete : Cement concrete plain1:2:4 mix

Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering)

Centering and shuttering for faces of walls, partitions,retaining walls and the like (vertical or battering including attached pilasters buttresses etc.

Centering and shuttering for columns (Square or rectangular or poly gonal in plain)

Cement Concrete 1:6:12 with stone aggregate 40mm gauge(mixing by mechanical means using concrete mixer volumetric type)

Cement Concrete 1:5:10 with stone aggregate 40mm gauge(mixing by mechanical means using concrete mixer volumetric type)

Cement Concrete 1:4:8 with stone aggregate 40mm gauge(mixing by mechanical means using concrete mixer volumetric type)

Cement Concrete 1:2:4 with stone ballast or shingle (mixing by mechanical means using concrete mixer volumetric type)

Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS : 1791 and vibrated by needle vibrator but excluding steel reinforcement centering and shuttering in foundation and plinth .

Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS : 1791 and vibrated by needle vibrator but excluding steel reinforcement centering and shuttering in superstructure .

First class burnt brick work laid in cement sand mortar 1:6 in foundation and plinth .

First class burnt brick work laid in cement sand mortar 1:5 in foundation and plinth

First class burnt brick work laid in cement sand mortar 1:5 in first storey up to 4 meters above plinth level.

First class burnt brick work laid in cement sand mortar 1:4 in first storey upto 4 metres above plinth level

115mm thick brick wall laid in cement mortar 1:4 without reinforcement in foundation and plinth .

Conglomerate floor 25mm thick cement concrete topping 1:2:4 using mechanical mixer for mixing of material

Conglomerate floor 50mm thick cement concrete topping 1:2:4 using mechanical mixer for mixing of material

12.5 mm thick cement plaster 1:3

12.5 mm thick cement plaster 1:4

12.5 mm thick cement plaster 1:5

20 mm thick cement plaster 1:4 in two coat work

21 mm thick cement plaster 1:5 in two coat work

Applying priming coat with metal primer on new steel or iron work including preparation of surface+ Painting two or more coats with aluminum paint to give an even shade excluding priming coat

Painting two or more coats with anticorrosive bitumastic Paint to give an even shade

Steel work fixed independently without connecting plates including cutting hoisting and fixing in position MS Rail (Through Rate)

Steel work fixed independently without connecting plates including cutting hoisting and fixing in position Earth Flats

Mild steel requirement for RCC work where not including the complete rate of RCC including bending, binding and placing in position complete in all respects. Above 20mm dia bars

Cold twisted deformed (Ribbed/ Tor Steel Bar) Bars Fe 500 grade as per IS 1786-1985, for R.C.C works, where not including in the complete rate of RCC including bending and placing in position complete

Welding by gas or by electric plant, including carriage to and from workshop etc.

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density complete as per technical clause 406 of MORT&H specifications

Boring for Hand Pump in clay fitting stainer and pipe up to 75mm dia above: From 0 to 15m

Boring for Hand Pump in clay fitting stainer and pipe up to 75mm dia above: Exceeding 15m but upto 30m

Supplying and spreading of crushed stone3/4" nominal size(20mm) in 3" (75mm) thick layer over PCC flooring in the switch yard area marked or as per directions of Engineer-in-Charge.

Fixing of templates along with bolts as per drawing

Providing & Fixing base Plates Size 235x220x12mm with 4 No. holes at site for Transformer plinth

Supply & Fixing MS Cleats 65x65x6 mm - 19 mm weighing about 425 grams for T/F Plinth

Providing and Fixing of MS 12.5 mm dia 300 mm long anchor bolts as per drawing.

Providing & fixing Angle Iron nozing made out of 50x50x6 mm angle Iron & with M.S Flat of size25x3 mm Hold Fast 125 mm long at 60 cm c/c complete in all respect for out door cable trenches.

Supply & Fixing of various sizes M.S. Angle Iron Post ( various sizes and making 8 No holes in the main post and MS Flat of Size 40x6 mm, as per drg. No. HW/TB-565-R2

Providing & fixing of barbed wire fencing having dia 2.24mm ( 4 rows ) including all fittings such as hook bolts 3/8” dia with check nut 10”long with G.I Clips of 14 SWG and 3/8” hex bolt with nut as per IS-278/1962 and as per drg. Complete in all respects.

Providing & Fixing G.I. Wire Netting Mesh of 12 Gauge 50x50x mesh180 cms high fastened galvanized with 4No. M.S.Wire Rope 6/7 strand 1/15” dia each with all fitting complete in all respect as per drg. No. HW/TS-5635 R and Arch drg No. 3-R/Job No. 112/S and conforming to I.S-2721/1974 and 3459/1977 respecttivly.

P & F M.S.Cable Racks made out of M.S Flat 75x6 mm & M.S.Angle Iron for various size of40x40x5 mm complete as per drg.

Providing & fixing Angle Iron nozing made out of 50x50x3 mm angle Iron & with M.S Flat of size25x3 mm Hold Fast 125 mm long at 60 cm c/c complete in all respect for out door cable trenches.

Supplying hoisting of Ferro cement trench cover frame of size given below made of MS flat 50X3mm with 6mm dia bars with 9/2" and 9"C/C welded to flat with lifting hooks as per drg. no C/W DS-2537 R5 and CW/DS 2420 R3 complete Trench Cover P-Type (3'4" x 1'6")

Supplying hoisting of Ferro cement trench cover frame of size given below made of MS flat 50X3mm with 6mm dia bars with 9/2" and 9"C/C welded to flat with lifting hooks as per drg. no C/W DS-2537 R5 and CW/DS 2420 R3 complete Trench Cover R-Type, T1-Type & T2 Type (2'8" x 1'6")

Supply , Hoisting & plaicng of ferro cement trench covers,frames of size given below made of MS Flat 50x3 mm with 6mm dia bars at 4.5 "and 9"welded to flat with lifting hook as per Drg No CW/DS2537 R5 and CS/DS2420 R3 Complete - T3 - type (2'-2"x2"-2")

Supply , Hoisting & plaicng of ferro cement trench covers,frames of size given below made of MS Flat 50x3 mm with 6mm dia bars at 4.5 "and 9"welded to flat with lifting hook as per Drg No CW/DS2537 R5 and CS/DS2420 R3 Complete - T4 - type (1'-9" x 2'-6")

Supplying & Fixing 1 BHP 1 Phase Monoblock Non-Clog Pump Conforming to IS-5600/1970 and technical specification no. 16 alongwith 50 mm G.I B-Class suction pipe 9 ft. long delivery pipe 50 mm dia,G.I B-Class 10 ft long pipe specials switch starter complete in allrespect.

Supply & Fixing of 75mm Dia AC Pipe

Providing stopping arrangement for transformer wheels consisting of 40x6mm, 150mm long forged to fit closely with 2no. 12mm dia 75m long bolts with standard size of nuts & washers

Dismantling of wire netting mesh

Dismantling of barbed wire fencing

Recovery of bricks

Recovery of brick bats

Recovery of Angles at scrap

Extra Carriage of materials & diff. of rates of material- Cement

Extra Carriage of materials & diff. of rates of material- Steel

Extra Carriage of materials & diff. of rates of material- Fine sand

Extra Carriage of materials & diff. of rates of material- Coarse Sand

Extra Carriage of materials & diff. of rates of material- Crusher 13.2 mm

Extra Carriage of materials & diff. of rates of material- Crusher 11.2 mm

Extra Carriage of materials & diff. of rates of material- Stone metal 63/45mm

Extra Carriage of materials & diff. of rates of material- Stone metal 40mm

Extra Carriage of materials & diff. of rates of material- Bricks

G.S.Construction Co.

PAUL AND COMPANY