REPAIR, MAINTENANCE AND PERIODICAL OF YAMUNA VIHAR OF DAD AT NEW CANTT PRAYAGRAJ

Amount

Dismantling floor, hearth or wall tilling including cement mortar bedding and rubbish off the premises complete all as specified and directed.

M&L for joint free non skid Ceramic tiles, coloured, superior/premium quality 7 to 8mm thick (square/ rectangular) polished, area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for glazed ceramic tiles, coloured First/superior quality 300 mm x 450 mm, 6 to 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match as in vertical surface including 10mm thick rendering in CM 1:4 complete all as specified and directed.

M&L for Vitrified Ceramic light shade 9-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for Vitrified Ceramic light shade 9-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm in vertical surfaces such as Dado/Skirting etc. set and jointed in neat cement slurry and pointed in white or coloured including 10 mm thick screed bed in CM 1:3 complete all as specified and directed.

M&L for heavy duty exterior finish designer pavement tiles, coloured, superior quality, 300x300x10mm thick as in floors/ pavement etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

Taking up or down 15mm bore pipes steel tubing and connections including cleaning for refixing or removing to store or removing from site complete all as specified and directed.

Taking up or down 20mm bore pipes steel tubing and connections including cleaning for refixing or removing to store or removing from site complete all as specified and directed.

S&F 15mm bore Steel water tubing 'medium grade', galvanised with all fittings like elbow, tee, socket, bend etc and fixed to wall, ceiling or laid in floor complete all as specified and directed.

S&F 20mm bore Steel water tubing 'medium grade', galvanised with all fittings like elbow, tee, socket, bend etc and fixed to wall, ceiling or laid in floor complete all as specified and directed.

Refixing old steel tubing and connection in new or old position in wall/ceiling/floor etc bore of pipe 15mm dia complete all as specified and directed.

Refixing old steel tubing and connection in new or old position in wall/ceiling/floor etc bore of pipe 20mm dia complete all as specified and directed.

Cutting chases in brick work, pinning in, making good to facings where required and pointing in cement mortar 1:3 for concealed water tubing or concealed conduit wiring, etc., and making good, (cutting not exc 10cm girth) complete all as specified and directed.

S&F rotational moulded, multilayer HDPE water storage tank triple layer white colour of 1000 ltrs capacity (Cylindrical vertical with closed top) ISI marked fixed in position on existing places including 02 Nos 20mm dia full threaded GI tank nipple, 20 mm dia PTMT float valve epoxy coated aluminium rod with high density plastic float ball of minimum weight 210 gms and refixing of inlet, outlet & overflow pipe etc, complete all as specified and directed.

S&F rotational moulded, multilayer HDPE water storage tank triple layer white colour of 500 ltrs capacity (Cylindrical vertical with closed top) ISI marked fixed in position on existing places including 02 Nos 20mm dia full threaded GI tank nipple, 20 mm dia PTMT float valve epoxy coated aluminium rod with high density plastic float ball of minimum weight 210 gms and refixing of inlet, outlet & overflow pipe etc, complete all as specified and directed.

S&F in repair PTMT ball valve high pressure with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe or brass ferrule and fixed suitable for 20mm bore pipe (minimum wt 210 gms) complete all as specified and directed.

S&F in repairs PVC tank cover/lid for 500/1000 ltr over head tank complete including fixing the lid with the existing tank with PVC hinges and male and female locking system complete all as specified and directed

S&F in repair PVC low level symphonic action flushing cistern of 10 ltr capacity including siphon, PVC float with ball valve, rubber cone and flush pipe, Brackets, 450 mm long PVC connection pipe etc complete all as specified and directed.

S&F in repairs complete PVC assembly/ Kit for PVC flushing cistern of any shape or make or capacity complete all as specified and directed.

S&F in repair SS grating doom 125mm dia with waste hole of steel fixed on floor/nahani trap with cement mortar complete all as specified.

S&F in repair bib taps long body cast copper alloy chromium plated with capstan head ( weight of each bib tap should not less than 0.4kg), screwed down, screwed for iron pipe or for brass ferrule 15mm bore complete all as specified and directed.

S&F in repair 15mm dia bib tap standard of PTMT any colour, high pressure screwed for iron pipe with minimum weight 90 gms, complete all as specified and directed.

S&F in repair pillar taps 15mm bore, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe or for brass ferrule complete all as specified and directed.(weight should not be less than 0.665kg)

S&F in repair Stop valves, (weight should not be less than 0.4kg each) cast copper alloy, screwed down, high pressure, with capstan head, chromium plated, with long shank and cup (concealed type) screwed both ends for iron pipe or for unions 15mm bore, complete all as specified and directed.

S&F in repair fancy type Chromium plated brass stop cock/ angle valve(weight should not be less than 0.4kg) for 15mm bore pipe, fixed in repairs complete all as specified and directed.

S&F in repair 32 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed

S&F in repairs Tubular towel rail of brass chromium plated, 20mm dia, D type, 60cm long between flanges, complete all as specified and directed.

S&F in repairs suitable for 15mm dia health faucet abs body with 08 mm dia, 01 mtr long flexible tube & wall hook complete all as specified and directed.

S&F in repairs soap dish (oval) type of stainless steel including Chromium plated brass screws and wooden/plastic cleats , complete all as specified and as directed.

S & F in repair acrylic shelf assembly consisting shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F in repair PVC connection 15mm dia and 45 cm long with 2 Nos PTMT nuts, complete all as specified.

Supply only 32/40mm bore PTMT waste pipe of best quality,600mm long for wash basin and sink etc complete all as specified and directed.

S&F in repair brass chromium plated waste coupling for S.S Sink with rubber washer plug etc complete

S&F in repair brass chromium plated waste coupling for wash hand basin with rubber washer plug etc complete

S&F in repair two way angle valve with wall flange 15mm bore, fancy type, quarter turn, brass chromium plated, long body with capstan head and cup screwed down, screwed for iron pipe or for brass ferrule including accessories complete all as specified and directed.

S&F in repair Brass Chromium plated shower rose 125 mm dia to 150mm dia with 190mm long arm, swivel joints etc complete all as specified and directed.

S&F in repair acrylic type corner shelves of 300mm/ 200mm size including SS screw and wooden / plastic cleat complete as approved by Eng in Charge complete all as specified and directed.

S&F stainless steel peg set of four, fixed with PVC rawl plug and screw complete all as specified and directed.

Demolition and breaking up (salt glazed ware, AC, PVC) drain pipes of any dia set in cement mortar complete.

S&F 110mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints, fixed to walls with and including suitable size PVC clamps complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints, fixed to walls with and including suitable size PVC clamps complete all as specified and directed.

S&F PVC (SWR) bend with oval access door any radius suitable for 110mm bore PVC pipe jointed with solvent complete all as specified and directed.

S&F PVC (SWR) bend with oval access door any radius suitable for 75mm bore PVC pipe jointed with solvent complete all as specified and directed.

S&F PVC (SWR) branch piece, single (single Y) equal or unequal suitable for 110mm bore PVC pipe jointed with solvent complete all as specified and directed.

S&F PVC (SWR) branch piece, single (single Y) equal or unequal suitable for 75mm bore PVC pipe jointed with solvent complete all as specified and directed.

S&F PVC (SWR) branch piece, four way (Y or T) equal or unequal suitable for 110 mm bore PVC pipe jointed with solvent complete all as specified and directed.

S&F in repair vitreous china wash basin, white, flat back type of size 550x400mm including brackets including cutting for and pinning in ends of brackets in CM 1:3 including 32mm dia chromium plated waste coupling complete all as specified and directed.

S&F in repair vitreous china counter top wash basin, white, oval shape of size 560 X 450mm fixed on granite including cutting for and pinning in ends in CM 1:3 including 32mm dia chromium plated waste coupling complete all as specified and directed. Make: Hindware Cat Part No. 10049 or Equivalent

M&L for 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like incl moulding the edges etc, and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations compete all as specified and as directed.

S&F in repair vitreous china wash down water closed pan (Pedestal pattern) with 'P' or 'S' trap white, including connection to trap and cistern, flush pipe including white plastic water closet seat cover, closed pattern with flat bottom & cover and aluminium anodised hinging device and making good disturbed surface of floor complete all as specified and directed.

S&F in repairs plastic seat cover white of pattern W.C including fixing device and Chromium plated nuts, complete all as specified and directed.

S&F in repair vitreous China squatting pan, ‘Orissa ‘pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) squatting pan including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor complete all as specified and directed.

S&F in repair Stainless steel plate rack (utensil rack) of size ( 600mm x 750 mm) and depth 300 mm made with 1.00 mm thick stainless steel sheet (AISI 304) provided with brass screw including necessary fittings, nut/bolts complete all as specified.

S&F in repair stainless steel sink made out of 1.00 mm thick stainless steel sheet conforming to AISI 304 with plug, washers, waste pipe, cast iron cantilever brackets, connecting union over all size 550 mm X 400 mm x 250 mm complete all as specified and directed.

Taking down shutters of any description exceeding 1.0 sqm but not exceeding 2.0 Sqm each leaf complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area n.exc 1.50 Sqm each complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area exc 1.50 Sqm but n. exc 4sqm each complete all as specified and directed.

Refixing shutters in the same opening of any description exc. 1.0 sqm but not exc. 2.0 Sqm each leaf including easing and adjusting including refixing the builders hardware complete all as specified and directed.

S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 X 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibre (wood powder/ rice husk/ wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100 gms) fabricated with mitre joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified & directed. Note: (i) For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ ceosetory windows & other Frames/ Chowkhat of size 65 X 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with mitre joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made

S & F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30 mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. Note: Stainless steel butt hinges shall be paid separately.

S&F 30mm thick factory made wire mesh solid WPC door shutter consisting of Density 650 Kg /Cum manufactured by an ISO-9001-2015 certified Company , Door to be panelled with SS mosquito Mesh and XTN aluminium Mesh for additional strength and safety purpose confirming to IS 4020. The door should be water proof, termite proof, fire retardant and having screw holding capacity. Door to be fixed to frame with 3 Nos. M.S powder coated butt hinges size 100 mm X 25 mm X 2 mm and 32 mm long steel screws drilled suitable to pass through both the walls of the M.S tube, other hardware should be fixed with 19 x 6 mm size steel screws etc complete all as specified & directed.

S & F Solid PVC moulded door frame of size 50mm x 47 mm made out of 5 mm thick single side prelam PVC sheet reinforced with MS tube complete all as specified and directed.

S & F factory made Solid PVC moulded door shutters 28 to 30 mm thick (stiles) with 2, raised panel design with 2 mm thick moulded Prelam on front face and 2 mm thick prelam PVC sheet on back side completed all as specified and directed.

M&L for forming jambs, etc. to openings in CM 1:6 (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete all as specified & directed.

S&F providing and fixing factory made UPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+/ -0.2mm). Window profile with hollow section with multi chamber. Frame (108mm x 45 mm), sliding sash (39 mm x 58mm). Sliding mesh Sash (39 mm x 58 mm) Sliding interlock (One vertical length in each shutters) (45 mm x 35 mm), Glazing bead (20 mm x 18 mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+/- 0.2mm thick galvanised steel Frame (32 mm x 13 mm), 2 Nos, sliding sash (29mm x 19mm), profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners including hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. glazing and other connected accessories complete all as specified & directed. Note: (i) Glazed shutters of float glass thickness not less than 5 mm and wire mesh shutter with stainless steel wire mesh 0.36 mm dia with aperture 1.4 mm shall also be deemed included in quoted rate and no extra payment will be made separately. (ii) For UPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

S&F in repair factory made UPVC white colour fixed glazed window / ventilator made of (small series) frame (47 mm x 50 mm), mullion 47 mm x 68 mm both having wall thickness of 1.9 +/- 0.2 mm and single glazing bead of appropriated dimension (area upto 0.75 Sqm) comprising of uPVC multi- chambered frame and mullion (wherever required) extruded profiles duly reinforced with 1.60 +/- 0.2 mm thick galvanised mild steel section made from roll forming process of required length, shape & size according to uPVC profile, uPVC extruded glazing beads of appropriate dimension, EPDM gasket, GI fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall also be fusion welded including drilling of holes for fixing hardware and drainage of water etc. After fixing of frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and approved quality complete all as specified & directed. Note: (i) Plain / Figured glass thickness not less than 4 mm shall also be deemed included in quoted rate and no extra payment will be made separately. (ii) For UPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

M&L for making good under cills or over arches, lintels and bressummers including all pinning when necessary (in CM 1:6) complete all as specified & directed.

Supply and fixing /fabrication in repair kitchen cabinet & wardrobe/ cupboard made out of 16 to 18 mm thick coloured PVC board laminated sheet complete all as specified and directed.

Supply and fixing /fabrication in repair kitchen cabinet & wardrobe/ cupboard made out of 16 to 18 mm thick plain PVC sheet complete all as specified and directed.

S&F in repair magnetic catches with steel body 'H' type fixed to shutter complete all as specified and directed.

S&F continues (piano) hinges, mild steel, bright finish width of flap (when open) 30mm for kitchen cabinet work complete all as specified and directed.

S&F brass lock for cup board, grade I, size 50 mm, 2 levers with necessary accessories complete all as specified and directed.

S&F 125 mm long, 12 mm dia SS dash fasteners for door frame etc including necessary drilling etc complete all as specified and directed.

S&F 250 mm long SS sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections suitable for use with pad lock complete all as specified and directed.

S&F 100 mm size SS butt hinge medium weight, cold rolled mild steel complete all as specified and directed.

S&F 150 mm size SS handle, fabricated type, fixed with screw complete all as specified and directed.

S&F 100 mm size SS handle, fabricated type, fixed with screw complete all as specified and directed.

S&F 200 mm size SS tower bolt, fabricated type, fixed with screw complete all as specified and directed.

S&F in repair Rubber door seal 32mm wide with aluminium strip of size 19mm wide fixed with machine steel screw with washer complete all as specified and directed.

S&F in repairs SS door stopper double 75 mm long having rubber bush 25mm dia long (high) fixed to door shutter with steel screw complete all as specified.

S&F in repairs 300mm, helical door springs including roller and roller plate complete all as specified and directed.

S&F in repairs 250 mm long SS sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections suitable for use with pad lock complete all as specified and directed.

S&F in repairs 100 mm size SS butt hinge medium weight, cold rolled mild steel complete all as specified and directed.

S&F in repairs 150 mm size SS handle, fabricated type, fixed with screw complete all as specified and directed.

S&F in repairs 100 mm size SS handle, fabricated type, fixed with screw complete all as specified and directed.

S&F in repairs 200 mm size SS tower bolt, fabricated type, fixed with screw complete all as specified and directed.

S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed

S&F in repair stainless steel tubing of 25 mm dia for curtain rod fancy type with brackets including end cap (wall to wall or flush to wall) for securing to curtain rod complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames, aluminium frame, concrete or brick surrounds, glazed with putty or fixed with beads complete.

S&F in repair figured glass 4mm thick pin head type and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane complete all as specified and directed.

S&F in repair Sheet glass 4mm thick, ordinary quality and glazing with oil putty in square not exceeding 0.5Sqm in each pane complete all as specified and directed.

M&L for water proofing treatment to sunken floor consisting of the following operation:- (a) Cleaning of surfaces by wire brushing, booming & removing all dust particles from surface. (b) M&L PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate 25mm thick, finishing the surface even and smooth as levelling course without using extra cement. (c) Applying two coat of Fosroc Brush bond 2 component POLYMER MODIFIED CEMENTITIOUS water proof coating with proper overlapping when the coating is green all as specified. (d) Laying of water proof protective layer of 15mm thick cement mortar screed in the ratio of 1:4 mixed with and including integral water proofing compound Fosroc Conplast WL as per manufacturer instruction, finishing the surface even and smooth without using extra cement.

Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc. but excluding ashlars facing, dressed stone work and precast concrete articles etc. complete all as specified and directed.

M&L for old size brick work with fly ash bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

Demolition of reinforced cement concrete in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete (reinforcement cut as required to facilitate demolition) all as specified and directed.

M&L for providing precast cement concrete type B1 1:2:4 in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in cement mortar 1:4 complete all as specified and directed

S&F mild steel TMT bars 10mm dia and over as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified & directed.

M&L for mild steel framed work such as grills, grates etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks, framed and hung as gates including pintle hinges, stops, handmade sliding bolts etc. and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

Demolition of unreinforced cement concrete in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete all as specified and directed.

M&L for 60mm thick M- 35 grade factory made vibratory compacted cement concrete rubber moulded, coloured interlocking paver block any shape and size conforming to IS 15658-2006 with grey cement and pigment as approved laid over and including 25mm thick sand cushion and joints filled with sand complete all as specified and directed.

M&L for cement concrete 1:4:8 type D2 using 40mm graded stone aggregate in foundations, filling and mass concrete, complete all as specified and directed.

M&L for cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in roof padding, in levelling course, benching, mud stops etc, complete all as specified and directed.

Taking down cement or cement lime plaster any description from walls/ceiling etc including racking out joints, hacking for key & scrubbing down with water including removing of debris outside of MOD land complete all as specified and directed.

M&L for rendering 15 mm thick in cm 1:4 fair faces of brick work or concrete surfaces finishing surfaces even and smooth without using extra cement , complete all as specified and as directed.

M&L for rendering 15 mm thick in cm 1:6 on other than fair faces of brick work or concrete surfaces finishing surfaces even and smooth without using extra cement , complete all as specified and as directed.

M&L for rendering 10mm thick in CM 1:3 on fair faces of brick work or concrete surface of ceiling and finished surface even and smooth without using extra cement complete all as specified and directed.

M&L for preparing of newly plastered wall surface and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed.

M&L for preparing of newly plastered wall surface including cornices and applying two coats of oil bound distemper over one coat of primer complete all as specified and directed.

M&L for 1 mm thick wall care putty on external and internal wall over newly plastered surface complete all as specified and directed.

M&L for preparation of newly plastered or unplastered surface of ceiling including cornices etc. by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and removal of vegetation and applying three coats of white wash on ceiling complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of steel or Iron of any description over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of old plastered or unplastered surface of wall including cornices etc. by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and removal of vegetation and applying one coat of white wash on old surface of wall complete all as specified and directed.

M&L for preparation of old plastered or unplastered surface of ceiling including cornices etc. by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and removal of vegetation and applying one coat of white wash on ceiling complete all as specified and directed.

M&L for preparation of old decorated surfaces of ceiling and applying one coat of oil bound distemper white or tinted on ceiling surface complete all as specified and directed.

M&L for preparation of old decorated surfaces of wall and applying one coat of oil bound distemper white or tinted on wall surface complete all as specified and directed.

Complete removal of existing treatment on wall of old decorated surfaces by scrapping tools/electric hand grinder and applying 1mm thick wall care putty, after dry the layer of putty, apply two coats of oil bound distemper white or tinted with paint sprayer machine over a coat of primer complete all as specified and directed.

M&L for preparation of old painted surfaces of wood or wood based of any description over 10cm width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old painted surfaces of steel or Iron of any description over 10cm width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for complete removal of the old treated surfaces of wall including cornices etc. by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and removal of vegetation and applying two coat of Cement Base Paint white or tinted of approved shade complete all as specified and directed.

S & F in repair brass CP bottle trap of suitable size and making it fully leak proof by providing ‘M’ seal on joints complete.

M&L for preparation of existing new or old plaster surfaces including removal of existing treatment and applying two coat of Dr. fixit sure ceal damp proof chemical or Smartcare hydroloc water proofing of make Asian on plastered surfaces complete all as specified and as per manufacturer instructions.

M&L uprooting of plants/ trees growth on wall/ drains/ roof surfaces etc in a skilled and careful manner using appropriate tools and means and without causing any damage to the adjoining part. The exposed surfaces of wall will be coated with a paste made from ammonium sulphate crystals or with tree killer chemical available in the market. In this condition the root system to be left to absorb and die. Note:- The rate for making good the existing wall surfaces damaged during the uprooting of the tree is deemed to be included in the rate quoted by the contractor.

M&L for repairing of existing mild steel cupboards / built -in-cupboards including necessary welding, hinges, handle etc complete all as specified & directed.

Taking up or down 32 mm bore pipes steel tubing and connections including cleaning for refixing or removing to store or removing from site complete all as specified and directed.

S&F 32 mm bore Steel water tubing 'medium grade', galvanised with all fittings like elbow, tee, socket, bend etc and fixed to wall, ceiling or laid in floor complete all as specified and directed.

Refixing old steel tubing and connection in new or old position in wall/ceiling/floor etc bore of pipe 32 mm dia complete all as specified and directed.

Schedule of Credit (MINUS) Rs. 54623.00 B/F from Serial Page No. [Note : Details of items for schedule of credit is given on Srl Page No. ] This amount shall be automatically deducted to arrive at tendered sum

Aditi Construction Company (BID ID -3122072)

Anupravesh Enterprises (BID ID -3120358)

M/S JAI DURGA CONSTRUCTION (BID ID -3107141)