Construction work of Khanjaravas to Jaysingh Nagla Road in District Mathura

Excavtion in soil using Hydraulic Excavator and Toppers with disposal upto 1000m Excavtion for roadwork in soil with hydraculic excavator of 0.9 cum bucket capacity inculiding cutting and loading in tippers. trimming bottom and side slopes, in accordance with requirements of lines, grades and cross-sections, and trasporting to the embankment location with a lift upto 1.5m amd lead upto 1000m as per technical Specifcation clause 302.3 as per SOR SI.No.-18, Ch. No.-5

Construction of embankment with approved materials obtained from roadway Cutting Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of Tables 300.1 and 300.2 as per Technical Specification Clause 301.5 as per SOR SI.No.-19, Ch. No.-5

Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site. spreading, grading to required slope and compacted to meet requirement of Table 300.2 as per Technical Specification Clause 303.1. As per SOR Chapter No. 5 Sl No. 21

Providing, laying and spreading Material on prepared sub grade, adding cement 43 grade OPC @2% by weight to the spread Material manually, mixing in place with rotavator and compacting with the road roller at OMC to achieve the desired unconfined compressive strength and to form a layer of sub-base. Granular Sub-Base with Coarse Graded Material (Cement Treated Subbase)

Providing, laying and spreading Material on prepared sub grade, adding cement @4% by weight to the spread Material manually, mixing in place with rotavator and compacting with the road roller at OMC to achieve the desired unconfined compressive strength and to form a layer of sub-base/base Cement treeted Base

Providing & applying Tack Coat with bitumen VG-10 using emulsion pressure distributor at the rate of 0.30 Kg./Sqm. on the prepared primed granular/old painted surface, cleaned with Machanical broom, including all Taxes, Material, Labour, T&P etc required for proper completion of the work, as per MORD specification No. 503

Providing, laying & rolling of open graded Premix Carpet of 20mm thickness composed of 13.2mm to 5.60mm aggregates including mixing in a suitable plant, laying & rolling with a three wheeled 80-100KN Static Roller capacity, finished to required level & grades Bitumen @ 14.6 Kg./ 10 sqm. area for premixing including all Taxes, Material, Labour and T&P etc required for proper completion of the work, as per MORD specification No. 508.

Providing and laying seal coat type "C" sealing the voids in a bituminous surfsce P.C. surface laid to specified levels grade and cross fall using with 6.7 mm nominal size grit of approved quarry @ 0.09 cum per 10sqm with Bitumen @ 6.50 kg/10sqm including heating of Bitumen to the required temperature and including all material , Labour & T&P etc. as per Clause 510 case-III of MORD Specification.

Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material.SI No- 12.1 as per S.I. No. 1, Ch.No.-6

PCC 1:3:6 in Foundation - Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing. as per S.I. No. 3, Ch.No.-6

Supply & Laying of Compacted 22.4~53 Stone Ballast under hume pipe

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in as per DSR No. 6.1.1 (Cement mortar 1:4 (1 Cement : 4 coarse sand)

Supply & Laying & fixing of 350mm N.P.-3 Hume pipe in proper position as directed by E/l including cartage of pipes/collars upto 30m distance.

Supply & Laying & fixing of 600mm N.P.-3 Hume pipe in proper position as directed by E/l including cartage of pipes/collars upto 30m distance.

Plastering with cement mortar 1:3 on brick work in sub-structure complete as per drawing and Technical Specifications Clauses 1300 & 2200 as per SOR SI.N0-20, Ch.No.-06

Part-A Maintainance Charge including @ All Items total work amount etc as per Direction of E/I for the period of Five Years from the actual completion of work. (Total Amount for PC Work Sl No. 1 to 15 = )

Maintainance of First Year (@ 0.00% of Total Work Amount of item 1 to 15)

Maintainance of Second Year (@ 0.75% of Total Work Amount of item 1 to 15)

Maintainance of Third Year (@ 1.50% of Total Work Amount of item 1 to 15)

Maintainance of Fourth Year (@ 2.25% of Total Work Amount of item 1 to 15)

Maintainance of Fifth Year (@ 1% of Total Work Amount of item 1 to 15)

Note - 1- Rates are inclusive of all taxes but excluding GST which shall be paid extra as applicable 2- Labour cess @ 1% will be deducted from contractor's bill at the time of payment 3- Maintenance will be calculated on value of actual work done.

Please Enable Macros to View BoQ information