Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹57.2 CrAccepted-AOC | ₹57.2 Cr Quoted ₹59.1 Cr | 1 | Accepted-AOC L1 |
| 2 | 2₹62.0 CrRejected-AOC | ₹62.0 Cr | 2 | Rejected-AOC Other than L1 |
| 3 | 3₹63.1 CrRejected-AOC | ₹63.1 Cr | 3 | Rejected-AOC Other than L1 |
| 4 | 4₹65.3 CrRejected-AOC H NO 716 A 3 STREET BEHARI GANJ AJMER RAJASTHAN 305 001 | ₹65.3 Cr | 4 | Rejected-AOC Other than L1 |
| 5 | 5₹65.6 CrRejected-AOC | ₹65.6 Cr | 5 | Rejected-AOC Other than L1 |
Tender Value
₹68.5 Cr
EMD Value
₹15 L
Closing Date
18 Sept 2024, 6:00 pmClosed
Chief Engineer Pune Zone
Chief Engineer Pune Zone Dakshin Kaman Marg CAMP, Pune PIN- 411001
ENGINEERING, PROCUREMENT AND CONSTRUCTION (EPC) FOR PROVISION OF OTM ACCN FOR KLP AT KANDIVALI, MUMBAI
2024_MES_659941_1
CA NO CEPZ/MUM/TOKEN-17 OF 2023-24
Open Tender
Civil Works
900 days
Kandivali, Mumbai
Class SS, category a(i)
Also refer PQ Criteria as per NIT.
9 documents required · 9 mandatory
₹3,000
GE (North) Santacruz, Mumbai
₹15 L
Yes
HQ Chief Engineer Pune Zone
10 Jan 2025
14 Jun 2024
25 Sept 2024
14 Jun 2024
18 Sept 2024
22 Jul 2024
15 Jun 2024 - 25 Jun 2024
26 Jun 2024
Amount
SCHEDULE 'A' PART-I - BUILDINGS & STRUCTURES INCLUDING INTERNAL & EXTERNAL SERVICES AS DEFINED IN ANNEXURE-I TO V Note: This schedule is not pre-priced by MES and the rate indicated as "Rs 0.00" under Col 6 signifies this fact only
Engineering, Procurement & Construction (EPC) of buildings/ structures as per GRIHA norms including all internal services & external services (except Sch 'A' Part-III to XII) as defined in Annexure-I to V, complete as detailed in scope of work and other documents of tender, complete all as specified and directed.
NOTE: Schedule ‘A’ Part III to XII items which are Prepriced by MES, Bidders shall insert their lump sum amount in the Green coloured field under Col-6 only.
Sch ‘A’ Part II (Rain Water Harvesting) (Refer Annexure-V)
Total amount of Sch ‘A’ Part III (Road, Path, Hard Standing and Culverts)
Total amount of Sch 'A' Part-IV (Area Drainage)
Total amount of Sch ‘A’ Part V (Sewage Disposal)
Total amount of Sch ‘A’ Part VI (Compound Wall, Retaining wall, Fencing and Gate)
Total amount of Sch ‘A’ Part VII (External Water Supply)
Total amount of Sch ‘A’ Part VIII (External Electric Supply)
Total amount of Sch ‘A’ Part IX (Solar Hot Water System)
Total amount of Sch ‘A’ Part X (Lightning Protection)
Total amount of Sch 'A' Part-XI (Site Clearance, Area Development, Excavation & Earthwork)
Total amount of Sch 'A' Part-XII (Demolition/Dismantling)
SCHEDULE 'A' PART-XIII (MISC B/R AND E/M WORKS)
Supply, installing and commissioning of Water cooler, electric driven, single phase AC 230 Volts 50 Hz, fully stainless steel body with two faucets of storage capacity 80 litres and cooling capacity 40 litres per hour working with non CFC refrigerant and above 3 star rating including connecting lead and suitable 3 pin plug top complete all as specified and directed. Make:- Blue Star/ Voltas/ Usha.
Supply, installing and commissioning of Bottled water dispenser having option of dispensing hot and cold water with cooling capacity 3 litres/hour and tank capacity of 3.4 litre, heating capacity 6 litres/hour and tank capacity 1.60 litre, working in R-134a refrigerant including connecting lead and suitable 3 pin plug top complete all as specified and directed.
S&F Voltage stabilizer, copper wound, for automatic operation single phase naturally air cooled indoor type and designed for input variation between 140 volts to 280 volts with output voltage stabilized at 230 to 240 volts with accuracy of ± 2.5% and of capacity 1.0 KVA including all fixing arrangement complete all as specified and directed.
Supplying, installing, connecting, testing and commissioning Split AC unit inverter type, electric driven of capacity 2.0 TR, 220 volts, 50 Hz, complete with cordless remote control unit and built in air ioniser and plasma filter for better indoor air quality with minimum 3 star rating and EER 3.2 based on and including eco friendly gas R-134A including connecting lead and suitable 3 pin plug top complete all as specified and directed. (Makes as per Appendix 'C').
Supplying, installing, connecting, testing and commissioning Split AC unit inverter type, electric driven of capacity 1.50 TR, 220 volts, 50 Hz, complete with cordless remote control unit and built in air ioniser and plasma filter for better indoor air quality with minimum 3 star rating and EER 3.2 based on and including eco friendly gas R-134A including connecting lead and suitable 3 pin plug top complete all as specified and directed. (Makes as per Appendix 'C').
S&F Voltage stabilizer, copper wound, for automatic operation single phase naturally air cooled indoor type and designed for input variation between 140 volts to 280 volts with output voltage stabilized at 230 to 240 volts with accuracy of ± 2.5% and of capacity 5.0 KVA including all fixing arrangement complete all as specified and directed.
Supply , installing and commissioning of Refrigerator, electric driven, smart inverter type, single phase AC 230 Volts 50 Hz of capacity not less than 310 litres, double door type, frost free, minimum BEE 5 star rated including connecting lead and suitable 3 pin plug top complete all as specified and directed. Make:- Samsung / LG / Godrej / Whirlpool.
Supply , installing and commissioning of metal top Deep freezer, electric driven, single phase AC 230 Volts 50 Hz of capacity not less than 320 litres, single door type, including connecting lead and suitable 3 pin plug top complete all as specified and directed. Make:- Samsung / LG / Godrej / Whirlpool.
S&F Voltage stabilizer, copper wound, for automatic operation single phase naturally air cooled indoor type and designed for input variation between 140 volts to 280 volts with output voltage stabilized at 230 to 240 volts with accuracy of ± 2.5% and of capacity 2.0 KVA including all fixing arrangement complete all as specified and directed.
Supplying of Retro Reflective sign board made up with 1.2 mm thick stainless steel sheet, of which both faces shall be fully covered with high Intensity Prismatic (HIP) Retro Reflective sheeting of approved specification as per MORTH having approved message (Matter and Base) fully processed by pressure sensitive equipment of approved brand (Avery Dennison / 3M ) fixed on stainless steel frame made up of SS as described and as directed.
Supply & Erection of framed work for Sign board using stainless steel Gde 304 tubular section (round/square) size 25 mm to 50 mm with all fittings like bend, tee etc. complete all as specified and directed by EIC. Note: The design of each sign board frame / stand shall be approved by GE.
Supplying, Laying, jointing DI pipe of 150 mm bore (Ductile iron) spigot and socket ends, including specials class 'K-7' with rubber gasket (tighten joint), laid in trenches all as specified and directed.
Supplying, Laying, jointing DI pipe of 100 mm bore (Ductile iron) spigot and socket ends, including specials class 'K-7' with rubber gasket (tighten joint), laid in trenches all as specified and directed.
M&L Construction of valve chamber of following size, type and specifications using Fly ash old size burnt brick masonry, 15 cm thick foundation using PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) over 15 cm thick hardcore, 23 cm thick brick wall built in cement and sand mortar (1:4), 15 mm thick internal and external plaster including top of floor in cement and sand mortar 1:3 finished even and smooth without using extra cement, 3.15 mm thick MS sheet cover with 50 mm x 50 mm x 6 mm MS angle frame embedded in PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) coping having rectangular hinged opening of same size with locking arrangements & handle made out of 16 mm dia MS round bar, hold fasts etc applying one coat of red oxide primer and two coats of synthetic enamel paint to all steel surface including excavation and earth work in any type of soil and disposal of surplus soil to a distance n.exc 50 m complete all as specified and directed for the following sizes:-.
Chamber of internal size 1.20 m x 1.20 m x 1.20 m.
Chamber of internal size 0.90 m x 0.90 m x 0.90 m.
M&L Construction of RCC sump of required capacity in EPC mode using M-30 grade mix of concrete and HCR reinforcement bars as per design including excavation in all types of strata, foundation concrete, container walls, bottom, slab, top RCC roof slab with CI manhole covers and with ready mix cement plaster inside and outside exposed area including epoxy paint inside, refilling of earth and disposal of surplus earth within 50 m lead, including all piping connections, valves internal electrification, MS ladder, ventilation shaft, BB chambers at 5m of outer wall of tank complete including test for water tightness and hydraulic functioning, Top room as per zonal specifications included. Avg flow (Cum/d) is 401-500 depth of sump is 8.5M incoming sewer 4.00 - 5.00m. Note: The Sewage will be connected to the BMC sewage network as shows on site plan including excavation and earthwork and liaison/approval from BMC & municipal/Other local bodies including all compliances and fees, etc complete all as specified and directed
Supply, installing, testing and commissioning out door type Main LT feeder pillar box of suitable size, pedestal mounted, CPRI type tested factory made totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear side made of 3.15 mm thick CRCA sheet, framing with 50 x 50 x 6 mm thick MS angle iron and legs of size 0.5m long . duly fabricated and having proper locking arrangement in both front and rear door with 4 side slanting roof duly projected and painted to both internal and External surfaces with powder coating paint in heat process of sheet and suitable for 500 volts, 50 Hz, 3 phase 4 wire system and comprising with and including following accessories and mounted on PCC Plat form made out of PCC 1:3:6, 100 mm thick, 1 Mtr all round the panel board complete with the following items housed in 'Main Panel':-
NOTE: The cost of Panel shall include all accessories such as internal wiring connections (size not less than 2.5 Sqmm) with copper conductor FRLS type PVC insulated and approved make including following items and electrical instruments and other accessories as per recommendation of manufacturer etc. as per standard details provided by the manufacturer shall be included in the rate of the item and nothing extra on whatsoever ground shall be admissible.
BUSBAR CHAMBER 500 Amps rated Aluminium bus bar TPN duly insulated with coloured PVC sleeve as per standard colour code and rigidly mounted on Bakelite/DMC insulator bus bar support (Square/round ) insulators of suitable size and good insulation resistance.
INCOMING
(i) MCCB 4P of capacity 320 Amps, 415 Volts, 50 Hz, 3 phase breaking capacity 36 KA -01 No
(ii) 3 Phase digital multi functional meter - 01 No
(iii) Indicator lamp -01 set
(iv) CT (500/5A) - 03 Nos
OUTGOING
(i) MCCB 4 Pole of capacity 100 Amp , breaking capacity 25 KA with thermal release - 02 Nos (F/P No.1 and FP No.2)
(ii) MCCB 4 Pole of capacity 80 Amp , breaking capacity 16 KA with thermal release - 01 No ( SMB A)
(iii) MCCB 4 Pole of capacity 20Amp , breaking capacity 16 KA with thermal release - 01 No (Dining hall and cook house)
(iv) MCCB 4 Pole of capacity 16Amp , breaking capacity 16 KA with thermal release - 02 No (Inf Bn Spl Scale & During and ironing bldg )
(v) MCCB 4 Pole of capacity 10Amp , breaking capacity 16 KA with thermal release - 01 No (Street light)
(vi) MCB SPN of capacity 10Amp , breaking capacity 10 KA - 01 No (Trades man shop)
(vii) MCB SPN of capacity 16Amp , breaking capacity 10 KA - 01 No (For Timer)
(viii) Austro time switch - 01 No (For Timer)
(ix) Power contactor 3 pole AC, with 230V coil, 20 Amps rating - 01 No (For Timer)
Supply, installing, testing and commissioning out door type LT feeder pillar box of suitable size, pedestal mounted, CPRI type tested factory made totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear side made of 3.15 mm thick CRCA sheet, framing with 50 x 50 x 6 mm thick MS angle iron and legs of size 0.5m long . duly fabricated and having proper locking arrangement in both front and rear door with 4 side slanting roof duly projected and painted to both internal and External surfaces with powder coating paint in heat process of sheet and suitable for 500 volts, 50 Hz, 3 phase 4 wire system and comprising with and including following accessories and mounted on PCC Plat form made out of PCC 1:3:6, 100 mm thick, 1 Mtr all round the panel board complete with the following items housed in Feeder pillar No-1:-
NOTE: The cost of Panel shall include all accessories such as internal wiring connections (size not less than 2.5 Sqmm) with copper conductor FRLS type PVC insulated and approved make including following items and electrical instruments and other accessories as per recommendation of manufacturer etc. as per standard details provided by the manufacturer shall be included in the rate of the item and nothing extra on whatsoever ground shall be admissible.
BUSBAR CHAMBER 150 Amps rated Aluminium bus bar TPN duly insulated with coloured PVC sleeve as per standard colour code and rigidly mounted on Bakelite/DMC insulator bus bar support (Square/round ) insulators of suitable size and good insulation resistance
INCOMING
(i) MCCB 4P of capacity 100 Amps, 415 Volts, 50 Hz, 3 phase breaking capacity 25 KA -01 No
(ii) 3 Phase digital multi functional meter - 01 No
(iii) Indicator lamp -01 set
(iv) CT (100/5A) - 03 Nos
OUTGOING
(i) MCCB 4 Pole of capacity 80 Amp , breaking capacity 16 KA with thermal release - 01 No (SMB B)
(ii) Blank
(iii) MCCB 4 Pole of capacity 20 Amp , breaking capacity 16 KA with thermal release - 01 No (Dining hall and cook house)
(iv) MCB TPN of capacity 16 Amp, breaking capacity 16 KA - 01 No (Street light)
(vi) MCB SPN of capacity 16 Amp, breaking capacity 10 KA - 01 No (For Timer)
(viii) Austro time switch - 01 No (For Timer)
(ix) Power contactor 3 pole AC, with 230V coil, 20 Amps rating - 01 No (For Timer)
Supply, installing, testing and commissioning out door type LT feeder pillar box of suitable size, pedestal mounted, CPRI type tested factory made totally enclosed, dust and vermin proof, double leaf shutter in front and single leaf shutter in rear side made of 3.15 mm thick CRCA sheet, framing with 50 x 50 x 6 mm thick MS angle iron and legs of size 0.5m long . duly fabricated and having proper locking arrangement in both front and rear door with 4 side slanting roof duly projected and painted to both internal and External surfaces with powder coating paint in heat process of sheet and suitable for 500 volts, 50 Hz, 3 phase 4 wire system and comprising with and including following accessories and mounted on PCC Plat form made out of PCC 1:3:6, 100 mm thick, 1 Mtr all round the panel board complete with the following items housed in Feeder pillar No-2:-
NOTE: The cost of Panel shall include all accessories such as internal wiring connections (size not less than 2.5 Sqmm) with copper conductor FRLS type PVC insulated and approved make including following items and electrical instruments and other accessories as per recommendation of manufacturer etc. as per standard details provided by the manufacturer shall be included in the rate of the item and nothing extra on whatsoever ground shall be admissible.
BUSBAR CHAMBER 150 Amps rated Aluminium bus bar TPN duly insulated with coloured PVC sleeve as per standard colour code and rigidly mounted on Bakelite/DMC insulator bus bar support (Square/round ) insulators of suitable size and good insulation resistance
INCOMING
(i) MCCB 4P of capacity 100 Amps, 415 Volts, 50 Hz, 3 phase breaking capacity 25 KA -01 No
(ii) 3 Phase digital multi functional meter - 01 No
(iii) Indicator lamp -01 set
(iv) CT (100/5A) - 03 Nos
OUTGOING
(i) MCCB 4 Pole of capacity 40 Amp, breaking capacity 18 KA with thermal release - 02 No (JCO's Single living Accn & MI Room)
(ii) MCCB 4 Pole of capacity 20 Amp, breaking capacity 18 KA with thermal release - 01 No (JCO Mess)
(iii) MCCB 4 Pole of capacity 10 Amp, breaking capacity 16 KA with thermal release - 01 No (Religious Institute)
Supplying installation, testing and commissioning of Indoor SF6 Circuit breaker consisting of triple pole 400 amps, breaking capacity of 13.1 KA, having rupturing capacity 250 MVA for 3 seconds horizontal isolation and horizontal draw out type 11 KV totally enclosed extensible pattern with automatic drop down and independent spring charging type motor operated closing mechanism including motor suitable for operation on 230 volt single phase 50 cycle AC supply system and manually operating system with 30/110 volt DC shunt trip coil with Auxiliary switches mechanical ON/OFF indicator with protective relays and conforming to IS 3427 of 1997 complete all as specified with and including following items / instruments / accessories:-
(a) 3 Nos vacuum interrupters of rating 11 KV, 3 phase 50 Hz. 400 Amps having rupturing capacity 250 MVA mounted on common base segregated Epoxy body for higher electrical insulation and to maintain pole discrepancy as per IEC 56 and self aligned type isolating contacts.
(b) Self powered microprocessor controlled numeric relay comprising of two over current, one earth fault protection relay with high set for both phase and earth and with fault memory. universal auxiliary supply as per IS-3231, 8686 The setting for over current shall be upto 200% of 5A and for earth fault element 20% to 80% of 5A. Make : ABB/ SIEMENS/ L&T/ Crompton
(c) Current transformer(CT's) one set of three of ratio 50/25/5+5 Amps having 15 VA burden class 1.0, for metering and class 5P 10 for protection- 01 Set of 03 Nos
(d) Digital Master trip relay -1 No & One No anti pumping Relay.
(e) Digital type multifunction meter CT operated 110 Volts/ 30 having voltage , current, pf, frequency viewing facility (0-100 A), (0-15KV) suitable for CT & PT ratio as stated above - 01 for each panel. Make;- Secure/L&T/Schneider/ ABB/ Siemens
(f) Set of LED indicating lamp operating at 110V single phase as below:- (i) RED/GREEN. VCB ON-OFF Indication (ii) AMBER: Trip Indication (iii) WHITE: Trip Circuit Healthy Indication with Push Button (iv) BLUE: VCB Mechanism Spring Charged Indication
(g) 11 KV, 250 MVA 400 Amps, Three Phase Copper bus bars with Rear cable termination i.e.. Provision for terminating 3 core XLPE Cable of required size.
(h) 1 No Strip heater-100 W (continuously rated) with thermostat control for breaker/CT compartment with manual ON-OFF switch-1 set.
(j) Structural steel frame including PCC foundation and earthwork as per manufacturer specifications.
(k) 1 No 3 way breaker control switch with positions TRIP-NEUTRAL-CLOSE
(l) Both manual spring charging and motorised spring charging and operating arrangement.
(m) MCB 2.5A/3 amp for metering and protection circuit.
(n) (i) Auto trip. (ii) Motor/manual charged spring operating/closing mechanism. (iii) Fault alarm (iv) Manual tripping
(o) All wiring necessary for the above including interconnection to trip coil. The wire should be FRLS type in all panels.
(p) Test Terminal Block (TTB) to test meters and relays with sealing arrangement.
(q) One set of cast resin Potential transformer (PT) dry type having minimum 100 VA burden ratio 11 KV/√3/110V/√3 - 01 set of 3 phases.
(r) Power back suitable for at least 5 operations of spring charging & relay operation including battery backup (Maintenance free) including battery charging system.
NOTES: (a) Make of HT Panel :- Crompton/ Schneider Electrical/ ABB/ Siemens. (b) Contractor shall produce manufacturer's test certificate for all routine and type test of VCB's (c) Rate quoted shall be inclusive of above provisions and Civil works for foundation as per manual of manufacturer (d) Any spare/item required at site for functional of above VCB shall be done without any extra cost to the department. (e) Factory visit/ test shall be carried out by representative of accepting officer, contractor shall arrange the testing at manufacturer premises before dispatch of materials from factory. (f) Commissioning of VCB panels after installation shall be carried out by injecting current from outside source by a qualified engineer from OEM, Contractor shall arrange the tests as directed.
Supply and erect 07 meter long hot dipped galvanised OCTAGONAL street light pole with one single light bracket for street light. The bottom of pole shall be 130 mm dia and top shall be 70 mm dia with 3 mm thickness, high tensile strength conforming to BS EN 10025, base plate shall be 220 x 220 x 112mm with 4 nos of anchor bolt 'J' type 700 mm long 20mm dia with nut washer and bolt shall be inserted to RCC footing. The pole shall have internal inbuilt junction box including 3 phase bus bar and one 6 Amp MCB complete including necessary earthwork excavation in any type of soil strata, PCC 1:4:8 for foundation, RCC M-20 concrete footing with reinforcement, as per manufacturer drawing formwork etc complete all as specified and directed.
M&L Providing three core PVC insulated sheathed stranded copper conductor cable drawn into steel pole of size 1.5 sq mm for connection or security/street light fitting from junction box all as directed and specified
M&L Supplying and laying riddle soil filling in cable trenches before and after the cables are laid as in cushioning to cable, complete all as specified and directed.
Providing & fixing concertina coil fencing with punched tape concertina coil 450 mm dia up to 3.0 m ht of wall with existing angle iron Y shaped placed 2.4 mm or 3.0 m apart stud tired with G.I barbed wire tied to angle made from High Tensile Spring Steel - High Carbon Wire conforming to IS 4454/ Part -1 /Grade –SM duly Hot dipped galvanized with diameter starting from 2.50 mm , UTS 1670 N/mm2, Heavy zinc coating with minimum 230 gms per Sq.m. all complete all as specified and as directed.
ARBORICULTURE WORK
Preparing the ground surface by removing all vegetation, debris, stone etc and loosening / tiling the top layer of soil to a depth of 225 mm including digging out unsuitable soil and remove the same to a distance not exceeding 50m replace the removed quantity of soil with approved suitable soil obtained from out side MD land and preparing combination of soil and manure in the ration of 2:1 and application at site including spreading levelling so as to form a layer of 225 mm average thickness complete all as specified and directed at site. Note : Supply only additional quantity of approved soil and manure will be measured and paid separately.
Supply only suitable soil for lawn/ bed/ hedge etc as specified and directed.
Supply only manure (Cow dung) for bed/ lawn/ hedge etc all as specified and directed.
M&L Development of the area by planting of American and Korean grass with dibbling method by keeping the spacing of 30 centimetre between the tufts of grass including trenching the ground watering rolling moving (if required) and de-weeding complete till the grass form a thick carpet free from weeds including the cost of labour tools and tackles involved complete all as specified and as directed.
M&L for development of the area by planting of Ornamental tree of height 1m to 1.5 m including the cost of labour tools and tackles involved complete all as specified and as directed.
Notes for item Nos. 17.10 to 17.50:- (i) Rate of above items also include for maintenance by regular watering, deweeding, shaping, adding fertilizer and spraying of insecticide during currency of work as well as during Defects Liability Period of two years after completion of work. (ii) Bidders to note that payment for arboriculture work as mentioned in item Nos. 17.10 to 17.50 shall be made only after completion of 80% of building work.
Precision Infraprojects (BID ID -3097005)
TALWADEKARS INDIA BUILDCON (BID ID -3099241)
ASIAN CONSTRUCTION COMPANY (BID ID -3092688)
NITYA NAND AND SONS CONTRACTORS PVT LTD (BID ID -3091410)
MAHINDER PAL CONSTRUCTIONS PVT LTD (BID ID -3092741)
Hariom Projects Pvt Ltd (BID ID -3075242)
Som Projects Pvt. Ltd. (BID ID -3078936)
PRIME CIVIL INFRASTRUCTURES PVT LTD (BID ID -3074532)
Varindera Constructions Limited (BID ID -3095092)
SOOD ASSOCIATES PVT LTD (BID ID -3092932)
Ktech Engineer Builders Co. Pvt. Ltd (BID ID -3099008)
stage.html
html • 0.09 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.05 MB
Download all tender documents and submit your bid