Erection of 2 Nos. of Mini Tower with HT Line , Guarding arrangement for the replacement of failed UG Cable near Kalavasal Junction in West Division in MEDC,Metro,Madurai.

Supply of standard tower as per department approved drawing/design transporting of tower parts to site including sorting out of tower members including transport charges etc complete.

Erection of towers including sorting out of tower members, tightening punching the bolts and nuts, final checking cost of all T&P all lead lifts etc complete.

Earth work excavation in hard Gravelly soil

Earth work excavation in soft disintegratged rock for foundation not requiring blasting

Earth work excavation in medium and dense medium rock requiring blasting for foundation

Earth work excavation in Hard rock requiring welding and chiseling

Earth work excavation in Hard rock requiring control blasting for foundation

Painting M+6 Type towers with one coat red Oxide and Two coats of silver paints of approved quality (2 Towers)

Pole Earthing of Tower with 40mm dia*3mm thickness and 1.8m length GI pipe as per sketch including cost of coal, salt, GI Strip of required length etc

P.C.C 1:3:6 concrete using 40mm HBG metal for foundation without form work but including cost of cement all materials labour, lead, lift etc.,

P.C.C 1:2:4, concrete using 12 to 20mm HBG metal with Out form work but including cost of cement all materials labour, lead, lift etc.

P.C.C 1:2:4, concrete using 12 to 20mm HBG metal with form work but including cost of cement all materials labour, lead, lift etc.

Supply of Dead End Clamp 120Sq.mm W/A Type Bolts

Supply of 11KV 3*120 + 1*120 Sq.mm HT AB Cable

Supply of End Termination kit for 120Sq.mm HT AB cable

Labour for End Termination Kit for 120Sq.mm HT AB cable

Fixing of Dead End Clamp 120Sq.mm W/A Type Bolts

Laying of 11KV 3*120 + 1*120 Sq.mm HT AB Cable

Stringing and sagging of 7/4.09mm ACSR conductor (Span Length more than 30mtrs)

Fixing of Tapping Channel Cross Arm

Fixing of 11KV Pin Insulator

Fixing of 11KV Disc

Providing Cradle Guarding Arrangement

Alteration of all Type of Back clamps

Drilling of slot Holes in X Arms & channel

Transporting charges of Line materials from Pocket Store using Private Vehicle up to 30Km

Removing old UG cable