HEX HEAD BOLT M 24 X 80 /54 (T/L) TO IS 1364, S8.8 WITH CASTLE NUT TO IS 2232, SPLIT PIN TO IS 549, SPRING WASHER M24B TO IS -3063 & PLAIN WASHER 24MM TO IS-2016 FOR BUFFER & DRAW GEAR ARRANGEMENT (SPLIT HOLE OF DIA 5 MM AT A DISTANCE OF 10 MM FROM BOTTOM END).

Special Eligibility Criteria

1. 1

   Bulk quantity order will be placed only on CLW approved manufacturers or their authorized dealers/agents against C LW item ID:2101169 in IREPS UVAM for the tendered item.

   Document optionalConfirmation required
2. 2

   The Authorized dealer/agent of the approved vendors/OEM must upload tender specific authorization in proper format [preferably as per Annexure-4 of GCC attached], failing by which their offer will be summarily rejected.

   Document optional

Check List

1. 1

   [i] Have you attached the past performance credentials with your offer? [ii] Have you mentioned the complete address of the work premises of the OEM where Third Party Inspection (TPI) will be carried out before dispatch of the material?

Commercial-Compliance

1. 1

   Bidder are reminded to carefully go through IRS conditions of contract (included and uploaded along with the bid document) particularly those pertaining to Code of Integrity, Misdemeanor and penal measures . If two or more bidders are found to be sister concerns or affiliates (having common partner/director/promoter/owner/holding company decision control, etc.) the offers of all such sister concerns are liable to be rejected as per relevant provisions of IRS terms and condition.
2. 2

   FOR: Destination.
3. 3

   The evaluation of total unit rate (TUR) for the purpose of inter-se position will be on Total Unit Rate for deliveries up to destination.
4. 4

   Public procurement (Preference to Make in India) is applicable as per para 29.0 (29.1 to 29.6) of GCC attached.
5. 5

   All the bidders are advised to submit certificate of compliance for sharing land border with India as per the clause 32 and proforma at annexure - 8 of GCC attached.

   Document requiredConfirmation required
6. 6

   Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.

   Document optional

1. 1

   Responsible Clause: Code of Integrity Declaration: I/We have carefully gone through the IRS conditions of contract(included and uploaded along with the bid document) particularly Para 2500 pertaining to Code of Integrity, Misdemeanor and Penalties . I/We hereby certify that no other concerns or affiliates (such as having common partner/director /promoter/owner/holding company/management control etc.) have participated in this tender which give rise to a conflict of interest or fall under anti-competitive practices. We understand that the offers of all such related concerns including ours are liable to be rejected as per relevant provisions of IRS terms and conditions. I/We, affirm that we shall abide by the Code of integrity in general, with specific reference to conflict of interest [Para 2502(e)], anti- competitive practices [Para 2502(c)] and obligation to proactive disclosures [Para 2503]. I/We understand that we are fully responsible for the above declaration and it shall not be the Railway s responsibility to verify the same. I/We are aware that we shall be liable for all consequences of violation of Code of Integrity, if detected at any stage.