Loading…
Loading…
Tender Value
₹4.8 L
EMD Value
₹4,830
Closing Date
29 Jul 2026, 4:00 pm3d left
The Block Development Officer
Munchirai Panchayat Union Office
Construction of Mini CSC at Methukummal VAO office in Methukummal village Panchayat in Munchirai Panchayat Union
2026_RDTN_685720_1
A11/1814/2026
Open Tender
Civil Works
Works
Methukummal
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹4,830
Yes
14 Jul 2026
14 Jul 2026
29 Jul 2026
14 Jul 2026
29 Jul 2026
14 Jul 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Construction of Mini CSC Building at Sooriyacode village office in Methukummal village panchayat | |||||
| 1.01 | Earth work excavation in all soils such as red earth ,hard stiff clay soil, stiff black cotton soil, hard red earth, requiring blasting etc. | 12.06 | cu.m | 263.78 | ₹3,181.19 |
| 1.02 | Plain Cement concrete 1:4:8 mix using 40mm ISS metal including all cost and conveyance of all
materials to site and all labour charges etc complete. | 2.93 | cu.m | 5,527.71 | ₹16,196.19 |
| 1.03 | Brick work CM 1:5 mix using good country bricks including cost and conveyance of all materials to site and
all labour charges etc complete. | 9.79 | cu.m | 6,134.99 | ₹60,061.55 |
| 1.04 | Brick work CM 1:5 mix using good country bricks including cost and conveyance of all materials to site and
all labour charges etc complete. | 20.34 | cu.m | 6,134.99 | ₹1,24,785.7 |
| 1.05 | Supplying and errecting centering are strutting including necessary supports for place surface for RCC columns footing pedestal beam criticals pears etc.,using mild steel angles of sizes 90 x 90 x 10 cm gauge stifness welded mild steel of sizes 25 x 25 x 3 cm for boarding laying over silver oak joists of single 10cm - 6.5cm space of 75cm ceter to center | 3.79 | sqm | 547.5 | ₹2,075.03 |
| 1.06 | Supplying and errecting centering are strutting including necessary supports for place surface for RCC columns footing pedestal beam criticals pears etc.,using mild steel angles of sizes 90 x 90 x 10 cm gauge stifness welded mild steel of sizes 25 x 25 x 3 cm for boarding laying over silver oak joists of single 10cm - 6.5cm space of 75cm ceter to center | 10.04 | sqm | 1,095 | ₹10,993.8 |
| 1.07 | Supplying and Fabrication of steel for RCC works including all cost of cutting bending and tying of steels and kept ready for concrete in position etc., | 0.38 | sqm | 91,858.5 | ₹34,906.23 |
| 1.08 | Providing and laying in position, standardised concrete Mix M-20 Grade in accordance with IS 456
using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kg/m3 and maximum water cement ratio of 0.55, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10- 12mm machine crushed stone jelly and with about (4.79 cu.m) 7670 kg. of crushed stone sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard | 1.92 | cu.m | 9,249.41 | ₹17,758.87 |
| 1.09 | Supplying and applying of two coat putty including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers. [The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (waterproof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coat of putty, scrapping the putty area to level the surface smooth, etc., complete]. The Putty shoule be got | 5.74 | sqm | 303.49 | ₹1,742.03 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.48 MB
Tendernotice.pdf
Tender Documents • 1.46 MB
TechnicalBid.pdf
Additional Documents • 0.70 MB
BOQ_824256.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].