PROVN OF ONE BATHROOM COMPLEX NEAR BLDG NO T-20 IN ZONE 11 AND 02 X TOILET BLOCK WITH ALLIED WKS IN ZONE 10 AT TALBEHAT MIL STN

Amount

M&L for Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out soft/loose soil complete all as specified and directed.

M&L for PCC 1:4:8, type D-2 using 40mm graded stone aggregate as in foundations, fillings, mass concreting complete all as specified and directed.

M&L for RCC nominal mix 1:1.5:3 type A-1 for Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L for RCC nominal mix 1:1.5:3 type A-1 for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for RCC nominal mix 1:1.5:3 type A-1 for Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M&L for RCC nominal mix 1:1.5:3 type A-1 for Columns, pillars, piers, posts and struts complete all as specified and directed.

M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed.

M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc.complete all as specified and directed.

M&L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm.complete all as specified and directed.

Removing excavated material exc. 250 m but n exc. 500 m and depositing complete all as specified and directed.

M&L Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 using old size bricks, complete and all as specified and directed

M&L Brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in, built in cement mortar 1:4 using old size bricks, complete all as specified and directed.

M&L PCC (1:4:8) type D-2 (using 20mm graded stone aggregate) 75mm thick as in sub base of floors all as specified and directed.

M&L PCC (1:2:4) type B-0 (using 12.5mm graded stone aggregate) 25mm thick as in floors all as specified and directed.

M&L PCC (1:3:6) type C-2 using 20mm graded stone aggregate 75mm thick as in plinth protection finished cement concrete surface even & smooth with out using extra cement laid in alternate bays n.exc 2m in length all as specified and directed.

M&L for Hardcore Broken stone or boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.

S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for Chain link fencing confirming to Fe 410-w (Gde E-250) complete all as specified and directed.

S&F Mild steel TMT bars but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders cut to length, bent to shape required, including cranking, bending spirally for hooping for Chain link fencing confirming to Fe 410-w (Gde E-250) complete all as specified and directed.

S&F Steel ventilator with top hung shutter including hinges,hold fasts, steel peg stay, complete all as specified and directed.

M&L for 3mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube, fixing in same opening complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top, bottom and side rails, MS frame shall be covered with heat molded plain colour PVC’C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stile and plain colour PVC sheet for top rail lock rail &bottom rail on either side and as gap insert for top rail and bottom rail paneling of plain colour PVC sheet to be fixed in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement supplying and fixing in the frame at site complete all as specified and directed.

S&F butt hinges 100mm extruded aluminium alloy with galvanised mild steel hinges pin anodised and fixed complete all as specified and directed.

S&F of 200mm aluminium alloy tower bolts, stove enamelled black with bright bolt complete all as specified and directed.

S&F of 250mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F 125mm size aluminium alloy handles, fabricated type extruded section, ISI marked complete all as specified and directed.

M&L rendering 5mm thick in cement plaster 1:3 on ceiling surfaces of brick work/ concrete and surface finished even and smooth without using extra cement complete all as specified and as directed

M&L rendering 10mm thick in cement plaster 1:6 on internal surfaces of brick work/ concrete and surface finished even and smooth without using extra cement complete all as specified and as directed

M&L rendering 15mm thick in cement plaster 1:4 on external surfaces of brick work/ concrete and surface finished even and smooth without using extra cement complete all as specified and as directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of Cement base paint all as over a coat of primer complete all as specified and directed.

Material and labour for preparation of newly plastered surfaces and applying three coats of white wash on ceilings complete all as specified and directed.

Material and labour for preparation of newly plastered surfaces and applying three coats of white wash on walls complete all as specified and directed.

M &L for coloured non skid ceramic tiles 7 to 8 mm thick (square /rectangular) area of each tile exceeding 0.11 sqm but n.exc 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15mm thick screed in CM (1:6) complete all as specified and directed.

M&l galzed colour ceramic tiles in vertical surface 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick cement plaster in CM 1:4 complete all as specified and directed.

Vitreous china urinal partition white of size 310x700 mm. about 40cm above floor line, complete all as specified and directed.

M & L for preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc crome primer complete all as specified and directed.

M&L rendering 10mm thick in cement plaster 1:4 on surfaces of brick work/ concrete and surface finished even and smooth without using extra cement complete all as specified and as directed.

Applying evenly a tack coat of in dustrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces complete all as specified and directed.

APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified and directed.

S&F vitreous china squatting pan Orissa pattern size 580 x 440mm with integral foot rest inluding 'P' or 'S' complete all as specified and directed.

S&F in Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including all fittings complete all as specified and directed.

S&F PVC valveless syphonic action type flushing cistern low level white inlet, ball valves float valves & handle including brackets of 10 litre capacity including down take pipe 32mm dia and making good disturbed portion in CM(1:4) complete all as specified and directed.

S&F 15 mm dia bore pvc connections with PTMT nuts of length 600 mm long complete all as specified and directed.

S&F 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F 110 mm dia PVC (SWR) bend complete all as specified and directed.

S&F 110mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F PVC(SWR) Vent cowl 110mm dia complete all as specified and directed.

Grating doom 125mm dia of chromium plated complete all as specified and directed.

S&F rotational moulded polethylene water tank of 500Ltrs capacity (Cylindrical vertical with closed top) noticed and portion complete all as specified and directed.

S&F rotational moulded polethylene water tank of 1000Ltrs capacity (Cylindrical vertical with closed top) noticed and portion complete all as specified and directed.

S&F 16mm CPVC pipes SDR 11 & Plain CPVC SDR 11 of fixed complete to walls, ceilings or in floors and including all type of fittings etc complete all as specified and directed.

S&F 20mm CPVC pipes SDR 11 & Plain CPVC SDR 11 of fixed complete to walls, ceilings or in floors and including all type of fittings etc complete all as specified and directed.

S&F Bib taps, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in fancy type brass CP 3 in 1 wall mixer for hot & cold for mixing hot & cold water with provn of over head shower with area and long pipe and flanged screwed down for iron pipe 15mm bore fixed all as specified and directed.

S&F in fancy type brass CP center hole mixer for wash basin for mixing hot & cold water with provn of over head shower with area and long pipe and flanged screwed down for iron pipe 15mm bore fixed all as specified and directed.

S&F 15mm dia Stop valves, chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F Brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

S&F Brass chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed.

S&F Soap dish, vitreous China white, approximate size 160x 160x90mm soap tray embedded in the wall complete all as specified and directed.

S&F Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F Vitreous china wash hand basin coloured flat back of size 550X400 mm white excluding taps waste chain and plug and porcelain stopper but incl brackets complete fixed on brackets or erecting stand complete all as specified and directed.

S&F bevelled edge looking mirror 5.5mm thick of size 60cmx 45cm mounted on commercial plywood 6 mm thick including PVC beading all round and fixed to wooden plugs with chromium plated screws completeall as specified and directed.

S&F bevelled edge looking mirror 5.5mm thick mounted on commercial plywood 6 mm thick including PVC beading all round and fixed to wooden plugs with chromium plated screws completeall as specified and directed.

Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) incl brackets complete fixed on wall or erecting stand complete all as specified and directed.

S&F 15mm dia Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

S&F 32mm dia Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm- 45gms/40mm-60 gms) complete all as specified and directed.

S&F 32mm dia coupling of PTMT suitable for urinals, (Minimum weight 32mm-45gms complete all as specified and directed.

Angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms) complete all as specified and directed.

S&F 32mm dia Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe (Minimum weight 60gms) complete all as specified and directed.

M&L for Excavating over areas, n exc 1.5 m deep and getting out soft/loose soil complete all as specified and directed.

All as per item No 74 but each additional 1.5 m or part thereof in depth beyond the first 1.5 m getting out soft/loose soil complete all as specified and directed.

M&L for Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out soft/loose soil complete all as specified and directed.

M&L for PCC 1:4:8, type D-2 using 40mm graded stone aggregate as in foundations, fillings, mass concreting complete all as specified and directed.

M&L for RCC nominal mix 1:2:4 type B-1 20mm graded stone aggregate for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for RCC nominal mix 1:2:4 type B-1 20mm graded stone aggregate for Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm.complete all as specified and directed.

Removing excavated material exc. 250 m but n exc. 500 m and depositing complete all as specified and directed.

M&L Brickwork with sub class 'B' bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 using old size bricks, complete all as specified and directed.

M&L for PCC 1:2:4, type B-0 using 12.5mm graded stone aggregate as finishing concrete surface, channel benching of manhole, laid to shape,coping and slope surfaces finished even and smooth using extra cement including necessary form work etc complete all as specified and as directed.

S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for Chain link fencing confirming to Fe 410-w (Gde E-250) complete all as specified and directed.

M&L rendering 15mm thick in cement plaster 1:4 on surfaces of brick work/ concrete and surface finished even and smooth without using extra cement complete all as specified and directed.

M&L for PCC 1:2:4, type B-2 using 40mm graded stone aggregate as in surface channels and drains complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc complete all as specified and directed.

M&L for 150 mm bore SGSW drain pipe (Grade-A) laid in trenches and jointed in CM 1:1 and tested complete all as specified and directed.

M&L for concrete bed for 150 mm bore pipe in laid with PCC 1:4:8 type D-2 to drain pipes including packing under, haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

Providing precast cement concrete type B1 1:2:4 20 mm graded aggregate as in cover slabs for septic tank/ manholes/drains set in cement Mortar 1:4 complete all as specified and as directed.

M&L for Brickwork, with subclass ‘B’ bricks in one brick thick honey comb work, built in 1:6 using old size bricks, complete and all as specified and directed.

M&L for Broken brick coarse aggregate 63mm size for filling of Soak wells complete all as specified and directed.

Point wiring with 1.5 Sqm, single core, PVC inculated with multistranded PVC unsheathed copper conductor cable in and inlcluding rigid non metallic PVC concealed conduit 20 mm dia or higher, med grade , ISI marked complete with all PVC conduit accessories/fittings and sunk CI/pressed steel terminal switch boxes with 3 mm thick, top cover, concealed in wall including earth wire of PVC insulated unsheathed 1.5 Sqmm copper conductor connected to all fittings, sunken boxes and common earth and connected to earth dolly scrwed with brass screws, compelte all as specified and directed for One light/fan/exhaust fan point controlled by one, one way switch, 5/6 Amps. Note : Switches, sockets etc will be measured & paid seperately under relevant items.

All as per item No 94 here-in-before but wiring with 4 sqmm including 2.5 sq mm PVC insulated, unsheathed multistranded copper conductor cable 1100 volts grade, single core, earth continuity conductor connected to common earth dolly for one 3/5 pin 20A socket outlet compelte all as specified and directed. Note : Switches, sockets etc will be measured & paid seperately under relevant items.

Supplying & fixing for switch piano type, 1 way, 6 Amps, single pole, 230 volts AC circuit complete all as specified & directed.

Supplying & fixing for ceiling rose surface bakelite 65 x 20 mm, three terminals, complete all as specified & directed.

Supply anf fixing Lamp holder PVC / polycarbonate type with back plate suitable for batten fittings compelte all as specified and directed.

S&F SPN enclosure with a two pin and earth plug and socket complete with one MCB, SP capacity 20/25 Amps 10 KA 240 Volts complete all as specified and directed.

Supply & fix LED tube light along with fixture, 20 W including connecting up with twin core twisted flexible copper conductor cable with suitable size compelte all as specified and directed.

Supply and fixing LED lamp 9/10 watts compelte all as specified and directed.

S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size compelte all as specified and directed.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection compelte all as specified and directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300m compelte all as specified and directed.

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc compelte all as specified and directed.

S&F Single pole and neutral DB's with 200 Amp rated copper bus bar made of sheet steel enclosure (housing), double door recessed type factory made duly painted 4 way suitable for mounting one incommer, 2 pole, 240 volts isolator/RCCB/MCB and outgoing SPN/SP respectiviely including colour coated bus bar, Neutral link, Earth bar and Din Rail, mounting bracket, fixing clamps, etc complete all as specified and directed.

S&F MCB, single pole & neutral 32 Amps, 230 volts, 50 HZ, 'C' curve complete all as specified and directed.

S&F MCB, single pole 6 /10/16/20/25/32 Amps, 230 volts, 50 HZ, 'C' curve complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 2 core compelte all as specified and directed.

Excavation in trenches in soft/loose soil not exceeding 1.5 Metre deep and not exceeding 1.5 metre wide and getting out including forming bottom surface & sides to required slope/size, complete all as specified and directed.

Removal of surplus excavated spoil not exceeding 50 metre distance and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified & directed.

Returning filling in, and including spreading and leveling in layers not exceeding 25 cm thick complete all as specified & directed.

Material & labour for sand filling with clean dry fine sand unwashed including gently punning around cables in trenches for cable protection complete all as specified and directed.

Supplying & Laying Sub Class `B’ bricks, old size, kiln burnt, laid with axis of brick perpendicular to the axis of the cable, for protection of cable complete all as specified and directed.

M& L for GI pipe light grade ( ISI marked ) 40 mm dia fixing to wall / pole / under road / tarmac or layin in floor for protection of cable / strip including clamp as required for cable compelte all as specified and directed.

S & L Tubes, `Medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors/trenches of size 25 mm bore complete all as specified and directed.

Supply, fixing, jointing and testing, ISI Marked, of approved quality, gun metal globe/gate valve with iron wheel head, both ends screwed for iron pipe complete all as specified and directed for 25 mm bore pipe compelte all as specified and directed.

Excavation in trenches in soft/loose soil not exceeding 1.5 Metre deep and not exceeding 1.5 metre wide and getting out including forming bottom surface & sides to required slope/size, complete all as specified and directed.

Removal of surplus excavated spoil not exceeding 50 metre distance and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified & directed.

Returning filling in, and including spreading and leveling in layers not exceeding 25 cm thick complete all as specified & directed.

M/S SHIVA TRADERS

HARNAM SINGH ANIL SINGH

DEVENDRA ENTERPRISES

M/s Indu Enterprises