REPAIR/MAINT OF UG CABLE AND MISCELLANEOUS WORK AT B/R-II AREA UNDER GE GWALIOR

Amount

Supply, laying and testing of cable XLPE insulated, armoured, heavy duty, electric LT UG cable with multi stranded aluminium conductor, 1100 Volts grade including taking out existing cable of following size:-

35 Sqmm 3.5 core.

50 Sqmm 3.5 core

70 Sqmm 3.5 core.

95 Sqmm 3.5 Core

120 Sqmm 3.5 Core

300 Sqmm 3.5 Core

400 Sqmm 3.5 Core

16 Sqmm 4 Core

M&L for Boring of holes under road, pavement, hard standing by Manually up to size 100 mm complete all as specified and directed.

M&L for GI Pipe light grade complete with fittings laid in floor/ trenches/ wall as cable protection of 100 mm dia complete all as specified and directed.

Same as Item No 03 but size 80 mm dia.

Same as Item No 03 but size 50 mm dia.

Excavation in trenches not exceeding 1.5m wide and not exc 1.5m depth and getting out in soft/loose soil complete all as specified and directed.

Returning, filling, including spreading, leveling, watering and well ramming in layers not exc. 25 cm in soft/loose soil complete all as specified and as directed.

Removal of excavated soil to a distance not exc 50 m and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed.

M&L for sand cushioning in trenches for cable protection including consolidation complete all as specified and directed.

Supplying and laying un reinforced precast concrete cable cover, Class LV, Type I, flat, size 250mm x 150mm x 40mm complete all as specified and directed.

M&L for painting of existing HT/LT pole/Security light pole of any size with one Coat of Aluminium paint over two coats of red oxide primer complete including Pole numering (6" Letter size with 4 digit/letter) fabrication work required complete all as specified and directed.

Restringing and stretching of existing sagged HT/LT ACSR conductor of any size on OH electric line of any length on existing poles after disconnection of binding wires (dismantling & taking down) service connection etc and making, binding and service connection complete all as specified and directed.

M&L for ACSR conductor on existing or new poles complete all as specified and directed.

M&L for cross arms, bracing, supports, clamps and back plated fabricated from structural steel sections including nuts, bolts, washers, welding bending cold or hot drilling holes for bolts in any shape or size as directed inclusive of 2 coats of aluminium paint over a coat of red oxide primer after dismantling old unserviceable cross arms complete all as specified and as directed.

M&L for Cable joining kit for LT cable for outdoor termination in repair heat shrink type joint complete with joining material and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 25 sqmm to 95 sqmm complete all as specified and directed.

M&L for Cable joining kit for LT cable for outdoor termination in repair heat shrink type joint complete with joining material and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 95 sqmm to 185 sqmm complete all as specified and directed.

M&L for Cable joining kit for LT cable for outdoor termination in repair heat shrink type joint complete with joining material and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 185 sqmm to 400 sqmm complete all as specified and directed.

M&L of Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

Supply and fixing of MCCB 4 Pole, 415 V Adjustable type, 160 Amps with breaking capacity 25 KA complete with spreader terminals including taking down old u/s MCCB complete all as specified and directed.

Supply and fixing of MCCB 4 Pole, 415 V Adjustable type, 200 Amps with breaking capacity 25 KA complete with spreader terminals including taking down old u/s MCCB complete all as specified and directed.

Supply and fixing of MCCB 4 Pole, 415 V Adjustable type, 250 Amps with breaking capacity 36 KA with spreader terminals including taking down old u/s MCCB complete all as specifed and directed.

Supply and fixing of MCCB 4 Pole, 415 V Adjustable type, 400 Amps with breaking capacity 36 KA complete including spreader terminals complete all as specified and directed.

Supply and fixing of MCCB 4 Pole, 415 V Adjustable type, 630 Amps with breaking capacity 50 KA complete including spreader terminals complete all as specified and directed.

M&L for Felling of trees exc 30 cm and not exc 100 cm girth including cutting of trunk, and branches and stacking of serviceable material and disposal of unserviceable material to a distance of exc 50 m and clearing site complete all as specified and directed.

M&L for Straight through joint Heating kits type for LT cable of size 25 to 50 sqmm, XLPE armoured cable 3.5 core complete all as specified and directed.

M&L for Straight through Heating kits type for LT cable of size 70 to 150 sqmm, XLPE armoured cable 3.5 core complete all as specified and directed.

S&F for Aluminium Bus bar Box of 100 Amp, 240-415 Volt, 50 Hz frquency with Powder Coated suitable for current electricity distribution complete all as specified and directed.

S&F Aluminium Bus bar Box of 200 Amp,240-415 Volt, 50 Hz frquency with Powder Coated suitable for current electricity distribution complete all as specified and directed

Supply and fix OFF LOAD change over switch 415V in sheet metal enclosures 4 pole of capacity 200 Amps complete all as specified and directed.

Material and labour for earthing complete (Including Testing) with galvanized steel earth plate electrode 600mm X 600mm X 6mm buried directly in ground vertically to a depth not less than 2.25 metre below normal ground level (with top edge of earth plate not less than 1.5 metre below ground level) connected to galvanized iron earth strip 32x6 mm (main earthing lead) by means of galvanized bolts, nuts and washers all as shown in electrical plate No 3 of MES Schedule Part-I (2009) with connected to earth test point & to main switch board with & including adequate quantity of charcoal dust and common salt alround earth plate & 40 mm dia GI pipe medium grade for earth lead protection pipe for suitable length and GI pipe 20 mm dia medium grade for watering pipe with funnel & wire mesh including necessary earth work and PCC (1:3:6) type C-1 (using 20mm graded stone aggregate) for earth pit, internal surface of concrete shall be given 10mm thick plaster in CM 1:4 and 40 mm thick precast RCC cover in (1:2:4) type B1 (using 20mm graded stone aggregate) with 3 Nos 8 mm dia TMT bars both ways with 12mm dia round bar handle complete all as specified & directed. NOTE: Earth strip and its protection pipe upto and including 7.5 mtr only from the top of earth electrode are included under this item.

M&L for Earthing complete with galvanised steel earth plate electrode 60cm×60cm×6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point & to main switch board with & including adequate quantity of charcoal dust and common salt alround earth plate & 40 mm dia GI pipe medium grade for earth lead protection pipe for suitable length and GI pipe 20 mm dia medium grade for watering pipe with funnel & wire mesh including necessary earth work and PCC (1:3:6) type C-1 (using 20mm graded stone aggregate) for earth pit , internal surface of concrete shall be given 10mm thick plaster in CM 1:4 and 40 mm thick precast RCC cover in (1:2:4) type B1 (using 20mm graded stone aggregate) with 3 Nos 8 mm dia TMT bars both ways with 12mm dia round bar handle complete all as specified & directed. NOTE: Earth strip and its protection pipe upto and including 7.5 mtr only from the top of earth electrode are included under this item.

M/s Tirupati construction (BID ID -3394537)

somyaenterprises (BID ID -3392236)

M/s Shanti Enterprises (BID ID -3395002)

M/s Sagar Construction (BID ID -3394018)

M/s Anupam Construction Co. (BID ID -3393696)

BABA DEVELOPERS (BID ID -3394968)

niranjan singh and company (BID ID -3390969)

keerti enterprises (BID ID -3394171)