Renovation of Generator Shed cum Parking shed and Roofing of Drawing Branch cum DCE Chamber by providing pre-coated galvanized sheet roofing and false ceiling at Campbell Bay in Great Nicobar Island.

Amount

Renovation of Generator Shed cum Parking shed and Roofing of Drawing Branch cum DCE Chamber by providing pre-coated galvanized sheet roofing and false ceiling at Campbell Bay in Great Nicobar Island.

Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 meters lead of and including cost of all labour charges and cost of minor tools, GST, Labour cess etc. complete. Asbestos Sheet

Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead and including cost of all labour charges and cost of minor tools, GST, Labour cess etc. complete.

Dismantling steel work manually/ by mechanical means in built up sections without dismembering and stacking within 50 meters lead as per direction of Engineer-in-charge and including cost of all labour charges and cost of minor tools, GST, Labour cess etc. complete.

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c) equivalent design mix and including cost of all labour charges and cost of minor tools, GST, Labour cess etc. complete.

Earth work in excavation in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressisng of sides and ramming of bottoms, lift upt 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 M. and including cost of all labour charges and cost of minor tools, GST, Labour cess etc. complete.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level and including cost of all labour charges and cost of minor tools , GST, Labour cess etc. complete. 1:4:8 (1 cement : 4 mainland river sand : 8 graded stone aggregate 40 mm nominal size from main land quarry)

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement but including cost of cement, sand, stone aggregate - All work up to plinth level and also including cost of all labour charges and cost of minor tools, GST, Labour cess etc. complete. 1:1.5:3 (1 cement : 1.5 Mainland River Sand: 3 graded stone aggregate 20 mm nominal size from main land quarry)

Centering and shuttering including strutting, propping etc. and removal of form work and including cost of all labour charges and cost of minor tools, GST, Labour cess etc. complete. Foundations, footings, bases for columns

Steel work in built up tubular (round,square or rectangular hollow tubes etc) trusses etc., including cutting, hoisting, fixing in poistion and applying a priming coat of approved steel primer, including welding and bolted with special shaped washer etc.including cost of all labour charges and cost of minor tools, GST, Labour cess etc. complete.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade on old work and also including cost of all labour charges and cost of minor tools , GST, Labour cess etc. complete.

Painting with ready mixed paint of approved brand and manufacture in all shades to give an shade New steel work (two coat) including cost of all materials, and transportation charges, materials to work site, Cost of all labour charges, labour cess, GST etc complete.

Providing and fixing precoated galvanised iron profile sheets (size,shape and pitch of corrugation as apporved by Engineer-in-charge) 0.50mm (+0.05%) total coated thickness with zinc coating 120 grams per sqm as per IS:277,in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge.The sheet shall be fixed using self drilling /self tapping screws of size(5.5x55mm) with EPDM seal,complete upto any pitch in horizontal/vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required and including cost of all labour charges and cost of minor tools , GST, Labour cess etc. complete.

Providing and fixing precoated galvanised steel sheet roofing accessories 0.50mm (+0.05%) total coated thickness with zinc coating 120 grams per sqm as per IS:277,in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling /self tapping screws complete: Ridges plain (500-600mm).

Fabrication and fixing of M.S flat for wind tie over roof with GI 'L' hooks & washers as directed by EIC including cost of M.S flat 40 x 6 mm cost of all other materials, all labour charges and transportation charges, minor tools, GST etc.complete.

Providing and fixing powder coated aluminium work (minimum thickness of powder coating 50 micron) consisting of tee/ angle sections, of approved make conforming to IS : 733 in frames of false ceiling including aluminium angle cleats with necessary C.P. brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I. level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer-in-charge (level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid for separately) and including cost of all labour charges and cost of minor tools, GST, Labour cess etc. complete.

Providing and fixing 6 mm dia. G.I. level adjusting hangers (upto 1200mm length), fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40x3mm size 60 mm long and stainless steel expandable dash fastener of 12.5 mm dia and 50 mm long, complete as per direction of Engineer-in-charge and including cost of all labour charges and cost of minor tools, GST, Labour cess etc. complete.

Providing and fixing 6mm thick Occanic sheet ceiling of everest or equivalent make of size 610mm x 610 mm with necessary nails etc. In the aluminium framed ceiling (frame work to be paid separetely) including cost of occianic sheet all labour charges transportation charges, minor tools, scaffolding charges, GST, labour welfare cess etc. complete.

Providing and fixing 30 cm wide, 60 cm overall semi-circular plain aluminium sheet gutter with iron brackets 40x6mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes, fixing charges of gutter with suitable G.I nut and bolts, charges for applying 2 coast of red oxide paint on MS flats, washers, transportation charges, all labour charges, GST, scaffolding charges etc. complete.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes including cost of all materials, cost of transportation charges of all materials, scaffoldings, labour charges, minor tools etc. labour cess, GST etc. Complete. 110 mm diameter

Providing and fixing syntex tank 2000 ltr capacity including cost of syntax tank fittings charges, syntex tank and including cost of all labour charges and cost of minor tools, GST, Labour cess etc. complete

Providing and fixing GI pipes complete with GI fitings and clamps, including cutting and making good the walls etc. (internal work). Exposed on walls, including cost of all materials, transportation charges of all materials to worksite, all labour charges, cost of minor tools, GST, labour cess etc.complete 15mm dia nominal bore

Providing and fixing brass bib cock of apporved quality and also including cost of all labour charges and cost of minor tools, GST, Labour cess etc. complete. 15mm dia nominal bore

Providing and fixing of 20 cm thick masonry with Hollow Block of size 0.40m x 0.20m x 0.20m cast with cement concrete 1:3:6 (1 cement : 3 quarry dust and 6-11.2mm stone chips) curing, fixing with CM 1:4 in wall including cost of cement of grade 43, stone aggregate, quarry dust, all labour charges of casting, curing, walling, hire charges of Hollow block casting machine, cost of timber pallets and transportation charges of all materials to work site, all labour charges, GST, minor tools etc. complete.

Quarying and collection of earth/gravel/ moorum for formation of embankment in road work from quarry at a lead of 1 km including cost of higher charges truck, POL, operator charges for quarrying, loading and unloading at site, royalty charges as direction of EIC complete, Labour cess and GST etc. complete.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering- all work upto plinth level 1:2:4 (1 cement : 2 mainland river sand : 4 graded stone aggregate 20 mm nominal size from mainland quarry) including cost of all labour charges and cost of minor tools , GST, Labour cess etc. complete.

Plastering in C.M. in 1:4(1 cement 4 River sand) mix 12 mm thick floated hard trowelled smooth both sides of wall including cost of cement, scaffolding all labour charges, curing, all other materials, transportation of materials, cost of river sand, GST, minor tools etc, complete.

KAKOLIL TRADE AGENCIES