Construction of Connectivity road from Judwaniya Pitch Road to Mahuari Badi Nahar Link Road in Dist Kushinagar

Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1. (Excluding GST)

Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per MORD Technical Speicification Clause 401 (Excluding GST)

Providing,laying and spreding material on a prepared Sub grade adding cement @ 2% by weight to the spred material manually mixing in aplace Rotavator and compcting with the road roller at OMC to achive the desired unconfined Compressive strength and to form a Layer of Sub Base. (Excluding GST)

Providing,laying and spreding material on a prepared Sub Base, cement @ 4% by weight to the spread material manually mixing in place Rotavator and compcting with the road roller at OMC to achive the desired unconfined Compressive strength and to form a Layer of Base. (Excluding GST)

Providing and applying tack coat with bitumen (VG-10)using bitumen pressure distributor at the rate of 0.35 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Speicification Clause 503 including cost of bitumen (VG-10) (Excluding GST)

Providing, laying and rolling of open-graded premix carpet of 20mm thickness composed of 13.2 to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line grade and level to serve as wearing coarse on a previously Prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100kN static roller capacity finished to required lavel and grades to be followed by seal coat as per Techincal Specification clause 508 including cost of bitumen) (Excluding GST)

Providing and applying seal coat type "C" comprising of a layer of bituminous binder followed by a cover of stone chipping of specified grading and rolling with power roller 8-10 tonne kN Static roller and finishing to required level and grades as per Technical Specification Clause 510 including cost of bitumen (Excluding GST)

Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1.. (Excluding GST)

Providing and laying Cement Concrete 1:3:6(1 cement :3sand : 6graded brick aggregate 40 mm nominal size) including supply of all materials, labour and T&P etc. required for proper completion of work and curing complete, also including cost of formwork in foundation and floors as per SI no.281 (Excluding GST)

Layig (40mm SSB)Bedding on well compacted sand,moorum or approved granular material as per Clause 1105(ii) (Excluding GST)