REPAIR/ MAINT OF INTERNAL WIRING AND PIPE LINE INCLUDING ALLIED ASSESORIES AT ZANGLI AND DRUGMULLA UNDER GE 874 EWS

Amount

Taking down carefully copper/ aluminium unserviceable/ perished point wiring (light, fan, socket or power complete including fixture and fittings such as switches, ceiling roses, pandents, regulators, sockets, light fittings, removing material from site for taking credit etc and making good disturbed surfaces of wall, floors complete all as specified and directed.

M & L for point wiring with PVC insulated unsheathed single core multi stranded copper conductor 1.5 sqmm, 1100 volts grade cable, FRLS, drawn through PVC casing capping including accessories and provision of PVC boxes for mounting switches, switch socket, fan regulator, provision of modular Teresa plate Irene stripes, No of modules as required on site or as directed by Engineer-in-Charge including one run of PVC insulated unsheathed multi stranded copper conductor cable 1.5 sqmm (green colour) earth wire and connected to earth dolly complete all as specified and directed.

(a) One light /one fan/point controlled by one switch.

(b) One socket outlet 5 pins 5 amps controlled by one switch on same board .

(c) One socket outlet 5 pins 5 amps controlled by one switch on independent board.

(d) One call bell point controlled by one bell push on independent board.

All as per item No 2 herein before but wiring with 2.5 sqmm copper wire ( FRLS) and 1.5 sqmm earth wire for socket outlet 6 pin 15 amps on independent board.

M & L for Modular point wiring for one light/one fan controlled by one switch with 1.5 sqmm PVC insulated unsheathed multi strand copper conductor FRLS cable with and including PVC concealed conduit ISI make heavy duty for one light fan/bell point controlled by one switch including modular cover plate of suitable way matching with surrounding modular boxes with suitable size including PVC green insulated unsheathed 1.5 sqmm multi stranded copper conductor FRLS cable as continuous earth wire and connecting to earth duly, complete all as specified and directed. Note: (a) Insulation test of point wiring (b) colour coding is to be maintained .(Ph-Red, N-Black, Half -Yellow, Earth- Green)

All as per srl item No 4 here-in-before but MODULAR call Bell point.

All as per srl item No 4 here-in-before but MODULAR 3 pin 5 amps socket outlet on the same board with other switch.

All as per srl item No 4 here-in-before but MODULAR 3 pin 5 amps socket outlet on independent board.

All as per srl item No 4 here-in-before but MODULAR 15/16 Amps socket outlet on independent board with 2.5 sqmm copper conductor FRLS cable and 2.5 sqmm PVC insulated unsheathed copper conductor cable FRLS (Green Colour) as earth lead.

S&F switch piano flush button single pole, one way 5 amps complete all as specified and directed.

S&F socket outlet multi 5 pins 5 amp, complete all as specified and directed.

S&F switch piano flush button single pole, one way 15amps complete all as specified and directed.

S&F socket outlet 2 in 1, 6 pins 15 amp complete all as specified and directed.

S&F switch Bell push, flush type, 5 amp one way complete all as specified and directed.

S&F ceiling rose, PVC/poly carbonate, isolated body three terminal complete all as specified and directed.

S&F lamp holder angle type PVC/Poly carbonate type insulated body with back plate suitable for batten/wall fitting complete all as specified and directed.

S & F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as required complete all as specified and directed.

S & F of Modular switch 1 way 6A, 1 module complete all as specified and directed

S & F of Modular switch 1 way 16A, 1 module complete all as specified and directed

S & F Modular Socket 6A/16A-2/3 Pin 2 module complete all as specified and directed

S& F Modular Socket 6A-2/3 Pin combined 2 Module complete all as specified and directed.

S& F Modular Bell Push 6A 1 Module complete all as specified and directed.

S & F of Modular fan regulator 6A 1 Module complete all as specified and directed

S & F in replacement LED light fitting 1x9W/1X10Wbulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fixing in replacement LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Supply and fixing in replacement LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fixing in replacement round shape 6 watt 220 volts AC dimension Ceiling cut out ø 110 mm, height 23 mm ±1 mm for 6 W. recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. Order code LHEBADP6IZ1W009/LHEBADP7IZ1W009 HSN 9405110 Make Havells/ HLDLR-R06-06-CW (Halonix)/ CDR-21106-30SL NWH (Crompton)

Supply and fixing in replacement LED luminaire 600 mm x 600 mm,35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

S&F Bed side designer lamp, FLORETINE WL 1LS B22 SS decorative, wall mounting, brushed nickel finish fixture with Opal Glass diffuser suitable with 9 W LED lamp complete all as specified and directed. Order code LHFOAJE1TZ1I060 HSN No 4051900 make Havells/ 40937 (Philips)/ JNL-CHR-MB 14048T1E27 (Jaquar)

Supply and fixing Decorative wall light, stainless steel, rust free fixture with white glass diffuser suitable for 7.5 W LED filament lamp complete with drivers, holders, x 7.5 W LED filament lamp LHFOAJD1TZ1I060 9405 including connecting up with three core flexible copper conductor cable of suitable size complete. Order code LHFOAJD1TZ1I060 9405/ 58145 (Philips)/JNL-CHR-MB 160275211A (Jaquar)

Supply and fixing linear wall light Aluminum die cast with Bi-Directional Beam. two way lights two led lights on both sides 4 watt integrated LED ensures long-lasting and energy-efficient Out Door type with IP65 complete all as specified and directed. Model No 4H 4 W 3000 K LHEVADPBPN6K004 94051100 make Havells/ Philips (12 NC) 919215000204/ LOPDN-10 CDL (Crompton)

Supply and fixing linear wall light Aluminum die cast with Bi-Directional Beam. two way lights three led lights on both sides 7 watt integrated LED ensures long-lasting and energy-efficient Out Door type with IP65 Protected complete all as specified and directed. Model; No 6H 7W 3000 K LHEVADPBPN6K007 94051100 Make Havells/ SLEWL10WUPDOWN (Surya)/ Philips (2167) 919215851203

Supply and fixing round wall light Aluminum Die Cast with Bi-Directional Beam. two way lights one led lights on both sides 4 watt integrated LED ensures long-lasting and energy-efficient Out Door type with IP65 Protected complete all as specified and directed. Model No 2H 4 W 3 K LHEVAEPBPN6K004 94051100 Make Havells/ (Jaquar) LYRAS 130/ 919215851094 (Philips)

Supply and fixing round wall light Aluminum Die Cast with Bi-Directional Beam. two way lights one led lights on four sides 7 watt integrated LED ensures long-lasting and energy-efficient Out Door type with IP65 protected complete all as specified and directed. Model No 4H 7 W 3 K LHEVAEPBPN6K007 94051100 make Havells/ Jaquar – LWWLO1X208XW/ 919215851222 (Philips)

Supply and fixing Square step light die-casted aluminum powder coated. ts integrated LED ensures long-lasting and energy efficient with IP65 Protected complete all as specified and directed. Model No SQ 5 W 3000 K LHEOAAP5I46H005 94051100 make Havells/ LSLWL-2400 (Crompton) / SLESTL5W (Surya)

Supply and fixing Gate light in aluminum die cast with modern artistic design and white PC diffuser suitable for retrofit LED lamps. Mounting Pole Dia-56 mm (max) OD. Dimension: ø 189 mm & Height: 370 mmm complete all as specified and directed. Model No 41N x A60 7.5 W LED filament lamp LHFOAQE1NZ5K7X5 94051900 make Havells/ LPTC40CDL (Crompton)/ SLEP730WETPP (Surya)

Supply and fixing surface square Slim surface mounted LED panel with premium diffuser to ensure glare free & even light distribution. Dimension: Length:: 190 mm, Width: 190 mm & Height: 28 mm for 24 W complete all as specified and directed. Model No 24 W LED 4000 K/ 6500 K LHEAAKP6IL1W024/ LHEAAKP7IL1W024 94051100 Make Havells/ LSTLSNE 24-FOCDL (Crompton)/ SLEDS2011RASTRUM (Surya)

Supply and fixing surface Round surface mounted LED panel with Ultra bright compact Panel in polycarbonate housing with high brightness LED chips, Higher/Lower wattage fixture can be replace with same mounting user friendly arrangement Dimension:, ø 184 mm, Height: 42 mm for 20 W complete all as specified and directed. Model No 20 W LED 4000K/ 20 W LED 6500 K LHEABIP6IL1W020/ LHEABIP7IL1W020 HSN 94051100 Make Havells/ LSCSM20W (WW) (Crompton)/ SLEDLS24WRIVO RDXX (Surya)

Supply and fixing in replacement round shape 12 watt 220 volts AC dimension Ceiling cut out Ceiling cut out ø 160 mm, height 23 mm ±1 mm for 12 W recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. Model No 12 W LED 4000 K/ 12 W LED 6500 K LHEBAEP6IZ1W012/ LHEBAEP7IZ1W012 HSN 940511009 Make Havells/ LSCSM12WWW (Crompton) / SLEDLR12WRIVORDXX (Surya)

Supply and fixing Garden Bollard light warm light, CONE NXG LED BOLLARD Cone NXG series acts as imposing street furniture with touch of aesthetic. Innovative design with uniformly lit diffuser at the upper portion acts a beacon of path guidance in a landscape environment with robust IP 65 rating. complete all as specified and directed. Model No CONENXGBLS8WLEDPSYM857TOPC HSN Code 9405 make Havells/ LBLSN-10 CDL (Crompton)/ SLEBL10WFLR1000NX (Surya)

Supply and fixing panel drivers with universal connector for easy installations. LED Drivers 3 watt complete all as specified and directed.

Supply and fixing panel drivers with universal connector for easy installations 4/8 watt complete all as specified and directed.

Supply and fixing panel drivers with universal connector for easy installations 9/12 watt complete all as specified and directed.

Supply and fixing panel drivers with universal connector for easy installations 15/18 watt complete all as specified and directed.

Supply and fixing panel drivers with universal connector for easy installations 24 watt complete all as specified and directed.

M & L for providing/ cutting the round/ square hole of required size in wall finishing the disturbed surfaces as per existing finishes and supply and fixing propeller PVC type AC ventilating fans, Single phase, 230 volts 300 mm sweep complete and supply and grouting the ragged bolts in wall, fixing the frame on the exhaust side (outer surface of the wall) and connecting with and including PVC insulated three core 1.5 sqmm copper cable from ceiling rose to exhaust fan motor and writing MES No. with black synthetic enamel paint 2.0 cm high complete all as specified and directed.

All as per item No 41 herein before but 250 mm sweep.

All as per item No 41 herein before but 200 mm sweep.

All as per item No 41 herein before but 150 mm sweep.

supply and fix in replacement unique LED flood/ focus light 70 W LED 6500 K with IP 65 protection complete all as specified and directed.

S&F in replacement of 10 watt LED lamp with white and cool light with a unique design integrating LED technology and motion detector for energy savings, detection range 10 mtr weather proof IP-55, day light sensing, angle of detection 180 degree, min luminous flux 1100 lmn complete all as specified and directed.

Supply and fixing waterproof LED Bollard Light round type pole lamp for garden, energy saving fitting, environment friendly long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LED 10 Watt bulb with looping box and connecting accessories complete all as specified and directed.

M & L for sub main wiring with two single core 6 sqmm PVC insulated and unsheathed 1100 volts grade, stranded copper conductor FRLS ISI marked drawn into & including medium grade PVC conduit/ casing capping 25 mm dia with all fittings and accessories and one continuous run of 4 sqmm copper conductor PVC insulated (green colour) as earth wire fixed into PVC casing / conduit (not less than 25mm outer dia) with all fittings and accessories fixed concealed/ surface including taking down old unserviceable sub main wiring and making good disturbed surface complete all as specified and directed.

M & L for sub main wiring with two single core 4 sqmm PVC insulated and unsheathed 1100 volts grade, stranded copper conductor FRLS ISI marked drawn into & including medium grade PVC conduit/ casing capping 25 mm dia with all fittings and accessories and one continuous run of 2.5 sqmm copper conductor PVC insulated (green colour) as earth wire fixed into PVC casing / conduit (not less than 25mm outer dia) with all fittings and accessories fixed concealed/ surface including taking down old unserviceable sub main wiring and making good disturbed surface complete all as specified and directed.

S&F sheet metal enclosure for DBs (single door type) when MCBs to be used single pole and neutral 4 way including blanking plate as required with 200 amps rated bus bar 240V fixed sunk/flush to the wall or niche complete all as specified and directed.

S&F sheet metal enclosure for DBs (single door type) when MCBs to be used single pole and neutral 8 way including blanking plate as required with 200 amps rated bus bar 240V fixed sunk/flush to the wall or niche complete all as specified and directed.

S&F sheet metal enclosure for DBs (single door type) when MCBs to be used single pole and neutral 12 way including blanking plate as required with 200 amps rated bus bar 240V fixed sunk/flush to the wall or niche complete all as specified and directed.

S & F in replacement of old unserviceable sheet metal enclosure distribution boards, double door three phase 415 Volts 6 Ways Vertical TPN DB For Comprising three phase four wire copper strip bus bar of appropriate capacity complete all as specified and directed and comprising the following (a) MCCB Four pole 100 Amps AC 415 Volts 25 KA - 01 Nos as incoming and 12 Nos MCB SP 40 Amps , C Series as outgoing complete all as specified and directed. Note :-(i) The DB Shall be Flush Fixed and making good the disturbed surfaces matching with existing specifications shall be part of job at no extra cost (ii) Connection of the MCCBs/MCB with Cable shall be made through appropriate size pin /bottle type thimble -properly crimped.

S & F of Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20Amp Complete all as specified and directed.

Supply and fixing MCB's single pole & neutral 40 to 63 Amps rating 240V, 10KA 'C' curve complete all as specified and directed .

S&F MCB's single pole 240 volts 6 to 32Amps 10 KA ‘C’ series complete all as specified and directed.

M&L earthing complete with galvanized steel earth plate electrode 60cmx 60cmx6mm thick buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to galvanized iron wire 4.0mm dia by means of bolts, nuts and washers of galvanized iron or steel, protected by GI light grade pipe 15mm bore including GI light grade water pipe 20mm dia with funnel all as shown in electric plate No. 03 of 2009 SSR Pt-I and testing on complete including earth work in any type of soil, PCC 1:2:4 type B-0 as in earth pit and cover 40mm thick reinforced with XPM (weight not less than 4.0Kg/Sqm) and frame of angle iron 25x25x3mm with lugs 2 Nos and with 6mm dia MS bar handle made to shape, common salt, charcoal and testing on completion, complete all as specified and directed.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminium housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed

S & F in replacement of socket outlet 2 in 1 , 3 pin , 5A Complete in existing circuit complete all as specified and directed

S & F in replacement of switch piano flush button single pole one way 5Amp 230 Volts in existing circuit complete all as specified and directed

S & F in replacement of socket outlet 2 in 1 , 3 pin , 5A and 15A flush type 230 Volts complete all as specified and directed

S & F in replacement of switch piano flush button single pole one way 15Amp SP 230 Volts in existing circuit complete all as specified and directed

S& F in replacement of switch Bell Push flush type 5 Amp one way complete all as specified and directed.

S & F in replacement of Buzzer, Ding Dong AC. 230 volts, single pole complete all as specified and directed.

S & F in replacement of Lamp holder/batten holder /angle holder insulated body with Bakelite back plate suitable for fittings in existing circuit complete all as specified and directed.

S& F in replacement of gang Box WITH 5 Amp Switch socket combination complete all as specified and directed

S& F in replacement of gang Box WITH 15 Amp Switch socket combination complete all as specified and directed

S & F in replacement of Hylam Sheet 4x4 to 4x6 inches for fixing of switches sockets including cutting for switch socket and fixing to existing sunken box with brass screw complete all as specified and directed

S & F in replacement of isolator MCB SP 240 Volts any rating from 6 to 40Amp C Curve with Capturing capacity 10KA including providing thimble for outgoing cables complete all as specified and directed.

S & F in replacement of isolator MCB SPN 240 Volts any rating from 6 to 40Amp C Curve with Capturing capacity 10KA including providing thimble for outgoing cables complete all as specified and directed.

S & F in replacement of Hylam sheet 6x10 to 8x10 inches for fixing of switches ,sockets including cutting for switch socket and fixing to existing sunken box with brass screw complete all as specified and directed

S & F in replacement of Modular metal flush box 3 module, complete all as specified and directed.

S & F in replacement of Modular metal flush box 4 module, complete all as specified and directed.

S & F in replacement of Modular metal flush box 6 module, complete all as specified and directed.

S & F in replacement of Modular metal flush box 8 module, complete all as specified and directed.

S & F in replacement of Modular metal flush box 12 module, complete all as specified and directed.

S & F in Replacement of Modular White Cover Plate with Frame, 3 Module complete all as specified and directed.

S & F in Replacement of Modular White Cover Plate with Frame, 4 Module complete all as specified and directed.

S & F in Replacement of Modular White Cover Plate with Frame, 6 Module complete all as specified and directed.

S & F in Replacement of Modular White Cover Plate with Frame, 8 Module complete all as specified and directed.

S & F in Replacement of Modular White Cover Plate with Frame, 12 Module complete all as specified and directed.

S & F in replacement and installation and commissioning of Automatic Fire Detection and Fire Suppression System with using following items all as specified and directed. Note :(i) Spare parts will be measured and paid separately.

S & F in Replacement of smoke detector complete all as specified and directed.

S & F in replacement of fire alarm panel complete all as specified and directed.

S & F in replacement of Horn for Fire alarm complete all as specified and directed.

S & F in Replacement of manual Call Point complete all as specified and directed.

Supply only manual Call Point complete all as specified and directed.

S & F in Replacement of wiring for fire alarm system complete all as specified and directed.

SS & F in Replacement of response indicator complete all as specified and directed.

S & F in Replacement of ceiling mounted extinguisher complete all as specified and directed.

M & L For Rewinding of ceiling fans with super copper enamelled wire with suitable gauge, varnishing, oiling and greasing of any make of size 1200/1400mm sweep by dismantling its parts capacitor by replacing petty items such as split pins, clamps, nuts& bolts , bearing & washer both end of down rod, cleaning of fan body and its blade by cleaning agent, assembling and connecting testing complete all as specified and directed.

M & L For painting of Ceiling Fan / Exhaust fan complete , in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc complete all as specified and directed.

M&L rewinding of exhaust fan with super copper enamelled wire with suitable gauge, varnishing, oiling and greasing of any make of size 450 mm sweep by dismantling its parts, capacitor 4 Mfd by replacing petty items such as nuts & bolts, bearing & washers, cleaning of exhaust fan body and its blade by cleaning agent, assembling, and connecting and testing complete all as specified and directed.

Supply and fixing ball bearing suitable for Ceiling and exhaust fan of any sweep and make complete all as specified and directed.

Supply and fixing gun metal bush ball bearing suitable for any sweep fan of any complete all as specified and directed.

Supply and fixing of capacitor 2.5/3/4 mfd complete all as specified and directed.

Supply and Replacement of unserviceable heating element with new one capacity of 1500 Watts (triangle type) for 25 Ltr geysers complete all as specified and directed.

Supply and Replacement of unserviceable heating element with new one capacity of 2000 Watts for 25 Ltr geyser (triangle type) complete all as specified and directed.

M & L For repair/replacement of Thermostat 7''/9" suitable for 25/50 ltrs capacity water geyser with automatic thermal cut out fixed in repair and including testing, complete all as specified and directed.

M & L For repair/replacement of copper Geyser Assembly with rubber packing for 25/50 ltrs capacity water geyser with automatic thermal cut out fixed in repair and including testing, complete all as specified and directed.

S & F and testing of compressor for split type air conditioner of capacity 1.5/2 ton and taking down of unserviceable compressor complete all as specified and directed.

S & F and testing of thermistor (temperature Sensor) for split type air conditioner of capacity 1.5/2 ton and taking down unserviceable Blower complete all as specified and directed.

S & F and testing of PCB for split type air conditioner of capacity 1.5/ 2 ton and taking down unserviceable PCB complete all as specified and directed.

S & F and testing of blower for split type air conditioner of capacity 1.5/2 ton and taking down unserviceable blower complete all as specified and directed.

S & F and testing of transformer for split type air conditioner of capacity 1.5/2 ton and taking down unserviceable blower complete all as specified and directed.

S & F and testing of outdoor unit fan blade for split type air conditioner of capacity 2/ 1.5 ton and taking down unserviceable Sensor complete all as specified and directed.

S & F and testing of outer unit fan motor of split type air conditioner of capacity 1.5/2 ton and taking down of unserviceable fan complete all as specified and directed.

S & F and testing of 2 Way Valve Assembly of split type air conditioner of capacity 1.5/2 ton and taking down of unserviceable fan complete all as specified and directed.

Supply and fixing of Capacitor 50 MFD for 1.5 / 2 ton AC complete all as specified and directed.

M&L for Repair and replacement unserviceable worn-out/ Burnt parts of Voltage Stabilizer upto 10 KVA of any make complete all as specified and directed.

Supply and refilling of gas R-22/ R-410/R32/ R134a for split/ window/ central package type Air conditioners and Refrigerators including checking and fixing leakage complete all as specified and directed.

Excavation in trenches not exc.1.5 mtr wide and not exc.1.5 m in depth for laying of pipes as in hard soil and getting out, complete all as specified and directed.

Returning, filling, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in any type of soil complete all as specified and directed.

Removal of excavated material to a distance not exc.50 m and depositing where directed at a level not exceeding 1.5 mtr above starting point complete all as specified and directed.

Taking up cast iron water mains bore of pipe 150 mm (including all fittings), with spigot and socket ends and lead joints including burning out joints and recovering lead complete all as specified and directed.

Taking up cast iron water mains bore of pipe 100 mm (including all fittings), with spigot and socket ends and lead joints including burning out joints and recovering lead complete all as specified and directed.

Taking up cast iron water mains bore of pipe 80 mm (including all fittings), with spigot and socket ends and lead joints including burning out joints and recovering lead complete all as specified and directed.

Supply and laying Cast iron pipes with spigot and sockets ends centrifugally, Class LA in 150 mm size laid in trenches complete all as specified and directed.

Supply and laying Cast iron pipes with spigot and sockets ends centrifugally, Class LA in 100 mm size laid in trenches complete all as specified and directed.

Supply and laying Cast iron pipes with spigot and sockets ends centrifugally, Class LA in 80 mm size laid in trenches complete all as specified and directed.

Supply & fixing bends (any Type radius and angle tapers any type (straight, bend, increasing decreasing or double sockets etc ) Tee pieces single branch 'Y' Junction, double branch, cross (all sockets or sockets and spigot) collars caps and plugs up to 150mm bore complete all as specified and directed.

M&L for run lead joint for CI pipe spigot and socket pipes and fittings of 80 mm bore complete all as specified and directed.

M&L for run lead joint for CI pipe spigot and socket pipes and fittings of 100 mm bore complete all as specified and directed.

M&L for run lead joint for CI pipe spigot and socket pipes and fittings of 150 mm bore complete all as specified and directed.

Taking up or down steel tubing of 15mm bore pipe and connection laid in trenches or floors or fixed to walls and including cleaning for re fixing or removal to credit complete with all fittings & valves etc complete all as specified and directed.

All as per description of srl item No.125 above but 20mm bore.

All as per description of srl item No.125 above but 25mm bore.

All as per description of srl item No.125 above but 40mm boe.

All as per description of srl item No.125 above but 50mm bore.

All as per description of srl item No- 125 above but 80mm bore.

All as per description of srl item No.125 above but 100mm bore.

S&F GI water tubing 15mm bore 'medium grade', galvanized, with all fittings like socket, union, elbow, bend, tees etc. jointed and laid in trenches complete all as specified and as directed.

All as per description of srl item No.132 above but 20mm bore.

All as per description of srl item No-132 above but 25mm bore.

All as per description of srl item No-132 above but 40mm bore.

All as per description of srl item No-132 above but 50mm bore.

All as per description of srl item No-132 above but 80mm bore.

All as per description of srl item No-132 above but 100mm bore.

S&F gun metal, globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed of bore of 15mm complete all as specified and directed.

All as per description of srl item No-140 above but 20mm.

All as per description of srl item No-140 above but 25mm.

All as per description of srl item No-140 above but 40mm.

All as per description of srl item No-140 above but 50mm.

Taking down old unserviceable old sluice valve and supply and fixing ball valve having SS ball with both CI end flanged, ISI marked, with nuts, bolts and washer and rubber gasket with stainless steel handle over PVC coating complete all as specified and directed for 80 mm bore pipe complete all as specified and directed.

Taking down old unserviceable old sluice valve and supply and fixing sluice valve cast iron ISI marked with flanged ends drilled with iron wheels head shuts and open direction cast on it class PN 1.6 confirming to IS 14846-2000 including necessary fixing arrangement such as rubber insulation, packing rings, jointing materials nuts, bolts washer, gasket and packing material etc for 100 mm dia bore complete all as specified and directed.

Taking down old unserviceable old sluice valve and supply and fixing sluice valve cast iron ISI marked with flanged ends drilled with iron wheels head shuts and open direction cast on it class PN 1.6 confirming to IS 14846-2000 including necessary fixing arrangement such as rubber insulation, packing rings, jointing materials nuts, bolts washer, gasket and packing material etc for 150 mm dia bore complete all as specified and directed.

Supply and Fixing in replacement CI Non return valve of size 100mm bore without bypass arrangement swing type confirming to IS 5312-1 flanged end, pressure rating PN 1.6 complete all as specified and directed.

Supply and Fixing in replacement CI Non return valve of size 80mm bore without bypass arrangement swing type confirming to IS 5312 flanged end pressure rating PN 1.6 complete all as specified and directed.

M&L for Lagging to pipes used in internal water supply or plumbing all round with, 40min thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144 Kg/cum conforming to IS 9842 for 40 mm dia pipe line complete all as specified and directed.

Supply and fix in replacement of 10 Sqmm 3 Core submersible copper conductor flat type for submersible pump complete all as specified and directed.

Supply and fix replacement of 6 Sqmm 3 Core submersible copper conductor flat type for submersible pump complete all as specified and directed..

Material and labour for repair of centrifugal motor pump set 60 HP including removing the motor pump from the foundation, disconnecting from the motor and transporting to the work shop for repair including replacement of worn out impellers-01 set with bronze impellers, replacing bearing No 6308-02 Nos, replacement of worn out bearing housing, replacement of gland bush, unserviceable nut bolts and washers and bringing back the pump to the pump house and coupling the pump with motor and fixing on foundation and testing, complete all as specified and directed. Note:-Rewinding job will be measured and paid separately.

Material and labour for repair of centrifugal motor pump set 40 HP, including removing the motor pump from the foundation, disconnecting from the motor and transporting to the work shop for repair including replacement of worn out impellers-01 set with bronze impellers, replacing bearing No 6312-02 Nos, replacement of worn out bearing housing, replacement of gland bush , unserviceable nut bolts and washers and bringing back the pump to the pump house and coupling the pump with motor and fixing on foundation and testing complete all as specified and directed. Note:-Rewinding job will be measured and paid separately.

Material and labour for repair of centrifugal motor pump set 20/ 25 HP, including removing the motor pump from the foundation, disconnecting from the motor and transporting to the work shop for repair including replacement of worn out impellers-01 set with bronze impellers, replacing bearing No 6307-02 Nos, replacement of worn out bearing housing, replacement of gland bush , unserviceable nut bolts and washers and bringing back the pump to the pump house and coupling the pump with motor and fixing on foundation and testing, complete all as directed. Note:-Rewinding job will be measured and paid separately.

Material and labour for rewinding of 60HP centrifugal motor by uncoupling the motor from the pump, removing the motor from the foundation and transportation of the motor to the workshop, opening the motor , taking out burnt out winding, preparing the slot for winding and rewinding of motor with super enamelled copper winding wire of appropriate size and gauge as existing to make the same cap of motor, varnishing and heat drying including scrapping of old paint & repainting with one coat of grey tinted synthetic enamel paint after motor is reassembled and testing complete all as specified and as directed.

Material and labour for rewinding of 40HP centrifugal motor by uncoupling the motor from the pump, removing the motor from the foundation and transportation of the motor to the workshop, opening the motor , taking out burnt out winding, preparing the slot for winding and rewinding of motor with super enamelled copper winding wire of appropriate size and gauge as existing to make the same cap of motor, varnishing and heat drying including scrapping of old paint & repainting with one coat of grey tinted synthetic enamel paint after motor is reassembled and testing complete all as specified and as directed.

Material and labour for rewinding of 20/25HP centrifugal motor by uncoupling the motor from the pump, removing the motor from the foundation and transportation of the motor to the workshop, opening the motor , taking out burnt out winding, preparing the slot for winding and rewinding of motor with super enamelled copper winding wire of appropriate size and gauge as existing to make the same cap of motor, varnishing and heat drying including scrapping of old paint & repainting with one coat of grey tinted synthetic enamel paint after motor is reassembled and testing complete all as specified and as directed.

Material and labour for rewinding of 7.5 HP to 10 HP centrifugal motor by uncoupling the motor from the pump, removing the motor from the foundation and transportation of the motor to the workshop, opening the motor , taking out burnt out winding, preparing the slot for winding and rewinding of motor with super enamelled copper winding wire of appropriate size and gauge as existing to make the same cap of motor, varnishing and heat drying including scrapping of old paint & repainting with one coat of grey tinted synthetic enamel paint after motor is reassembled and testing complete all as specified and as directed.

Material and labour for taking out the submersible pump set and motor assembly of capacity 5 HP to 10 HP from the bore well, by taking out the column pipes with chain pulley block and tripod stand, complete using skilled and experienced labour and transporting the same to workshop for repair and replacement of worn impellers -01 set , replacement of worn out bushings and bearings and transport back repaired pump set back to site after repair and Lowering the same in the bore well after testing complete all as specified and directed.

Material and labour for rewinding of submersible motor 25 HP by taking out the burnt out winding from the starter with PVC insulated copper winding wire of same gauge and size as per existing, replacement of thrust bearing and bushes and testing complete all as specified and as directed.

Material and labour for rewinding of submersible motor 5 HP by taking out the burnt out winding from the starter with PVC insulated copper winding wire of same gauge and size as per existing, replacement of thrust bearing and bushes and testing complete all as specified and as directed.

Material and labour for rewinding of submersible motor 7.5 HP by taking out the burnt out winding from the stator with PVC insulated copper winding wire of same gauge and size as per existing, replacement of thrust bearing and bushes and testing complete all as specified and as directed.

Supply and Fixing of 1 HP Centrifugal Motor Pump, of head and throughput output as mentioned at site, complete with all related accessories for installation and operation complete all as specified and directed.

Supply and fixing of 0.5 HP Centrifugal Motor Pump, of head and throughput output as mentioned at site, complete with all related accessories for installation and operation complete all as specified and directed.

S&F GI Union 50 mm dia complete all as specified and as directed.

S&F GI Union 15 mm dia complete all as specified and as directed.

S&F GI Union 20 mm dia complete all as specified and as directed.

S&F GI Union 25 mm dia complete all as specified and as directed.

S&F GI Union 40 mm dia complete all as specified and as directed.

S&F GI Union 80 mm dia complete all as specified and as directed.

S&F GI Union 100 mm dia complete all as specified and as directed.

M&L for developing of bore well by means of compressor of min @ 250 PSI capacity and pumping by means of 25% extra pump capacity until the sand free water obtained and all as specified and directed. Note : All the test to be carried out in front of Engineer - in - Charge and ensure existing yield.

S&F in replacement 60 HP Star delta starter complete all as specified and directed.

S&F in replacement starter for submersible pump 7.5 HP. complete all as specified and directed.

S&F in replacement starter for submersible pump 25 HP. complete all as specified and directed.

S&F in replacement rubber Star coupling of size L-190 for 40HP Centrifugal pump set complete all as specified and directed.

S&F in replacement rubber Star coupling of size L-225 for 60HP Centrifugal pump set complete all as specified and directed.

S&F in replacement gland packing of suitable size for 40/60 HP pump all as directed by Engr-in -Charge

S&F in replacement Bearing of suitable size for 40/60 HP pump complete all as specified and directed.

S&F in replacement leather gasket suitable for 80/100 mm dia pipe complete all as specified and directed.

S&F in replacement CI flange for 80/100 mm dia pipe tape complete all as specified and directed.

S&F in replacement Nut & Bolts 20x50 mm, 20x75mm, 20x100mm complete all as specified and directed.

S&F in replacement Nut & Bolts 15x50 mm, 15x75mm , 15x100mm complete all as specified and directed.

S&F in replacement of pressure boosting pump, 5 HP single phase 220 volts surface mounted pressure boosting power 37KW, 5HP suction and delivery 25mm rated voltage 220, 2800 rpm, F-50HZ, single stage head minimum 6m and maximum 28m with brass impeller cast iron delivery casing aluminium motor body carbon steel pump shaft with one year warranty complete all as specified and directed.

Kesar Impex (BID ID -3097022)

M/S ASHRAF CONSTRUCTIONS (BID ID -3096941)

M/S MOHD MAQBOOL RATHER (BID ID -3096934)

Bidder Name

M/S ASHRAF CONSTRUCTIONS

GH MOHD SHAH AND CO

Kesar Impex

M/S MOHD MAQBOOL RATHER